Clear Thin Profile iPhone 5 Cases VS Ghost Armour

I want to get a thin profile case for my iPhone 5 when I pick it up next week, but I want a case that also doesn't cover up the awesome design of the iPhone 5. Im looking at the Griffin Reveal Case for iPhone 5 but on their site they don't have the clear one available for purchase. Also Im also gonna be headign stright to GHost Armour to get a full body cover on the phone. Would this be good enought to protect against drops(I don't think so)?
If theres another case I can get that is clear and is thin profile I will accept links to those.
Thanks in Advance

I forgot about opening this thread.
I ended up ordering the SwitchEasy Nude Case,
Its 1mm Thin and is clear, I should have it in this week I can let you know how I like it

Similar Messages

  • I need a CLEAR THIN CASE! help!

    I have looked on the web for hours for a thin clear case that will fit the verizon iphone...i found many that fit the att one but not the verizon.....like the incase snap case, caze and others....
    please find me a clear case that is thin! 

    I been thinking about getting this case
    http://www.iphonecaze.com/iphone-3g-cases/style-series/iphone-4-zero5-ultra-thin-case.html?gclid=CLDY-PWzuqYCFQY65QodXV6cIw

  • Iphone 4 case scratch...

    Hey guys I have been hearing stories from people that iphone 4 cases leave scratches on the exterior of the phone. I am thinking of buying a case because this would protect my phone in case I drop it. However, I am faced with this dilemma of whether I should because I dont wana scratch the phone either. What do you guys think about this? Do you guys have any suggestions on which case to get (like the rubber ones or the hard plastic ones) in order to prevent scratching?

    I ordered ghost armor ( www.ghost-armor.com ). They have it available for Verizon iPhones. I ordered the full body case one. So the phone'll be protected even under the case. It's stronger and more resistant than InvisiShield.
    Also, here's a 10% discount promo code: GA4LAUP
    ;D
    Other than that, I'm getting the Waddler Case (it looks like a penguin!) from www.case-mate.com . They're the only site I found (beyond Verizon and Apple) that actually have Verizon iPhone cases available. And they've got quite a variety too! Yay! =D

  • IPhone 5 Cases - Style vs Protection

    The iPhone 5 is a stylish piece of tech and it's one of the main reasons many people get it.
    Do you feel adding a case takes away from the style? (no case)
    Do you feel you need extra protection to keep it safe from harm? (bulky otterboxes)
    Or do you add your own style to make it unique? (for example, custom iphone 5 cases)

    I am new to the iPhone craze, but after a couple of days using the "naked" phone I did not feel safe leaving it that way.  Holding it by the thin sides between two fingers, as I sometime do, was way too slippery feeling and insecure.  I bought a basic soft case, have a couple now, and a glass screen protector since then.  The cases are very form fitting, and rather cheap too.  It gives me much better grip around the edges, and a sense of security too.  I may move on  up to a bulkier one with even more protection but only if I really like the colors and design and decide it doesn't take too much away from my slim, sleak new iphone.

  • What iPhone 4 cases do you guys like?

    Hey everyone,
    I'm looking for the slimmest, clearest iPhone 4 case out there!
    Griffin cases are one of my favorites.  Anyone have any other suggestions?

    Little late to the game here as I just upgraded to a 4S (hand me down). I picked up a Speck Candyshell (http://www.speckproducts.com/iphone-case/iphone-4-case/candyshell-for-iphone-4s. html), a Caudabe Concentric (http://www.caudabe.com/collections/iphone-accessories/products/iphone44s-concent ric-pearlwhite) and a Caudabe Satin Series Shell (http://www.caudabe.com/collections/iphone-accessories/products/iphone44s-shell-r ubyred)
    The Speck is great. Fits well, full protection. Only thing is that the rubber sides (or whatever material that is) has started to fray a little bit. But other than that, I love the case. It is probably a tad bit bulkier than I'd like, but I guess there's nothing they can do about that for such comprehensive protection.
    The Caudabe cases look a lot better than the Speck in my opinion. The Concentric is quite stylish, with a fabric back that feels great to the touch. I also like how the sides of the case are transparent, which allows the iPhone's form factor to shine through. Lately, I've been using the Satin Series Shell which is apparently only 0.6 millimeters thin (or so they claim on their website). It is definitely very thin and the coating gives a sort of metallic sheen that changes shades depending on the light. Really gorgeous.
    Also looking at the Spigen SGP bumpers, but they seem a little pricy for what you get.  

  • I Was Told About an iPhone 4s Case that Really...

    In an Apple Forum I posted about a protective but not limiting case since I have trouble with dropping, hitting, etc. expensive things like large phones. Someone told me about a case, said he was thinking about getting one, did not sound too excieted about it, but I saw it at Best Buy and after looking for a year for a practical, case I could tell that this one was going to do what I needed in a case.  In this group of cases one really stood out but if it helps there was one that was like a holster.  I have got a major problem when I am carrying something like an expensive phone, laptop, etc. I drop them (my first MBP, it had to go back to Apple because I cracked the display costing me an additional $1000 just from jitting it by accident against the wall)  I wish I could remember the name of this case.  I came here hoping someone would say it because I was so excieted when I saw it, like I said after looking for a year, I could tell that this one was going to help me out a lot save the phone from being ruined after the first week. Yea Otter is OK but it seems like it would collect more dirt than anything else, this one just really felt to me that it would allow me to not have the iphone destroyed in a month.
    It was not fancy, but so practical.  Anyway, I will see if someone says the name of it.
    I am looking to get a new iPhone 4S (guess why?) and my contract at Verizon was up a year ago. I see that ATT advertises that only AT&T's Network let's your iPhone 4S download 3 times faster?  Is this true?
    A friend of mine sent me some emails from his iPhone 4S and his email adress was his phone number.  Is this an app or does the iPhone 4S allow you to send emails and get your emails without an additional app?
    Still not sure what carrier is the best.  I know I sound like I am all set but then I hear from someone and they make a good point.
    Any idea if the next iPhone will be 4G?
    thanks, I am just looking for some assist. in the areas I just have no idea on like what plan.  How does one decide what plan. Is the mobile hot spot one can make the iPhone 4S due allow one to surf on their MBP while on a car trip or do you need another type of MIFI by Novetel for that?

    applet-
    Which lifeproof case did you get?  Does it look pro along with being super durable? I need one that I can take into meetings and leave it out on the desk along with it being super durable like the ones on Ballistic Case Co.com.
    Do you have invisibleshield or can't you use that with your case?  some of the durable cases have their own cover so they do not allow the invisible shield to be used.
    Do you have a clip for your pants or to clip the case somewhere else?
    I think why they don't get better ratings is not because they are super durable and take care of the iPhone  but because they are not the best looking case out there including ones like some on the Ballistic Case Co.com website.  I have heard people say that they look cheap, like a cheap plastic.  I actualy started this post awhile back and I forgot the name but one night it came to me.  I am still looking  for a case that has the durability like LifeProof but a tad better looking and more professional.  Hard to explain if you don't see that but that is why I have not purchased one yet is because I need a case like LifeProof but more professional looking lie the ones at BallisticCaseCo.com.  Speck makes a good looking, classy durable iPhone 5 case too.  I think it is Speck.

  • Does iPhone 4S (AT&T) fit in iPhone 4 case (AT&T)?

    I just got a iPhone 4S (AT&T), and I wanted to use the bumper I'm currently using for my old iPhone 4 (AT&T).
    However, it doesn't fit exactly. The hole for the mute switch doesn't match with the iPhone 4S'.
    I read somewhere on the Internet saying Verizon iPhone 4 is slightly different from AT&T iPhone 4 because of internal components locations.
    But I thought all AT&T iPhone 4 is the same until now... Did Apple move the mute switch of the AT&T iPhone 4 a bit later???
    I got my iPhone with the bumper when Apple released it last year, so it's really from ititial production, I guess.
    Anyway my question is that I want to know if AT&T iPhone 4 and AT&T iPhone 4S are exact the same or not, specifically location of the mute switch and volume buttons.
    I want to buy a new case for the iPhone 4S, but some say just for iPhone 4 and don't mention 4S, so...

    I personally had an AT&T iPhone 4 and then upgraded recently to the iPhone4S with AT&T.  I did not notice anything with the placement of the buttons.  I did however notice that the camera would not take pictures correctly with my iPhone 4 case on the 4s. It took the picture but the picture would not turn out....it was almost like the lighting etc was being blocked somehow even though the camera lens appears to fit exactly through the iPhone 4 case hole ok.  Once I took the case off and retook the picture the picture turned out perfectly.  I wish the iPhone 4 cases would be compatible as I've not found another Speck Fabric case designed with the bigger camera hole for my iPhone4S.

  • I think I've found the best iPhone 3G case, What do you think?

    Just wanted to post some feedback on my experience with the ivyskin Glass Touch-Thru Ultrathin iPhone 3G Case.
    Yes I signed up just to write this review after being a perverse voyeur on these forums for awhile now, but I am no way affiliated with ivyskin. I recommend this case hands down, it has all that I was looking for in one. It's hard shell case with real glass touch screen built into the case. All ports are covered with a soft silicon so is the home button. The best part is that they'll be introducing a QuattroPac battery extension that fits into this case later next month.
    Putting it on is simple but you need to be careful about the volume switch, you need to insert the iPhone into the case from that side as instructed on the manual because I didn't want to break anything or scratch my phone, anyway it is quite simple.
    You should check this case out before you look at anything else, or after you look at all the cases to compare.

    Jean-Michel Massey wrote:
    Is a few scratches on the back of the phone going to break it? Technology is there to be used not to pamper, do you guys have a silk pillow to let your phone rest upon at night...
    No, but having slippery hands and accidentally dropping the iPhone will. A case will give you a much better grip and a lot better protection (if not 100%) should you ever drop the iPhone. I've seen people have iPhones without cases and dropping them accidentally only to have cracked their screens that they have to fork out more money to fix or replace them.
    Are you really that obtuse?

  • Trying to clear an array inside a case structure

    Good morning all.  I am trying (unsuccessfully, obviously) to clear an array inside a case structure.  (See case structure at right side of vi, I colored it green to make it easy to find).  Here's (briefly) what I'm trying to do.  I have 6 test probes in the process.  All six probes are connected to the Alcatel Detector through a 6-solenoid manifold.  As I run the test, I want to sample 1/second, for let's say 3 minutes.  For the first 30 seconds, I want to pull a sample from from probe 1, so I turn on solenoid one and leave it open for 30 seconds.  Now all 30 values are tagged as having come from Probe 1, and they're stored in array 1.  I can now compute an average value for probe 1. Then I close solenoid 1 and open solenoid 2, saving the next 30 values to array 2.  (and so-on, until I have measured all 6 probes for 30 seconds each).  Then I wait a pre-determined amount of time and repeat the process.  Here's my problem.  I want to clear out each array as I begin the second iteration, so that I can easily compute the average of the last 30 values.  If I initialize the array by connecting a constant 0 to the shift register on the for loop insid ethe case structure, it does not work, nor does it work to place the 0 outide the overall for loop (the next for loop going out, NOT the OVERALL for loop).  I know my programming skills are still crude, but I'm putting everything into this.  Anyone have any suggestions? 
    Attachments:
    HCMF rev 1 25 Apr.vi ‏485 KB

    Altenbach, I definately understand your approach, and I like it much better than my own.  But I still have no luck making it work.   I get the same result as before (my original attempt).  Value 0 of the array simply changes each iteration, with nothing "saved".  Each new value simply overwrites the last value.  Can you take a look at my new vi, with changes, and see if you can find the error of my ways.  I am but a rookie Jedi in the vast reaches of LabVIEW Space, and you are no doubt a Jedi MASTER
    Attachments:
    HCMF rev 1 25 Apr pm.vi ‏374 KB

  • ***FYI- AT&T IPHONE OTTERBOX CASES WONT FIT NEW VERIZON IPHONES- CLICK HERE WHY

    So like me, many verizon users in the US are excited to get their hands on a new iphone, i purchased a black and pink defender case from otterbox so ill have it when i get my iphone...well i started to do some research and found out that APPLE wanted to fix the pre-existing problem they experienced at AT&T of the antenna band on the bottom left hand corner and its ablity, when covered up by your hand, to lose service and drop calls. so Apple redesigned just the side as for the verizon iphone, the antenna is now at the top...pushing the volume buttons down more.....THIS CREATED THE PROBLEM OF THE OTTERBOX CASES NOT FITTING. I SPOKE WITH OTTERBOX CUSTOMER SERVICE ABOUT THE RELEASE OF THE NEW VERIZON CASE FOR THE IPHONE AND THEY SAID THEY WERE WORKING ON THE DESIGN AND THAT IT SHOULD BE FOR SALE IN THE UPCOMING MONTHS......DISSAPPOINTING...I KNOW! you would think, with their cases so high in demand, that they would have already released the cases before the iphone release...they would have made more money that way but hey...what do i know..lol
    but i wanted to share this information so that people wouldnt spend their money on a case that wont fit and can wait til the RIGHT cases are up for grabs!!
    **no i DO NOT work for otterbox nor verizon.
    GOOD LUCK WITH THE SEARCH OF THE IPHONE 4!!!

    Suupa wrote:
    jordiegirl wrote:
    So like me, many verizon users in the US are excited to get their hands on a new iphone, i purchased a black and pink defender case from otterbox so ill have it when i get my iphone...well i started to do some research and found out that APPLE wanted to fix the pre-existing problem they experienced at AT&T of the antenna band on the bottom left hand corner and its ablity, when covered up by your hand, to lose service and drop calls. so Apple redesigned just the side as for the verizon iphone, the antenna is now at the top...pushing the volume buttons down more.....THIS CREATED THE PROBLEM OF THE OTTERBOX CASES NOT FITTING. I SPOKE WITH OTTERBOX CUSTOMER SERVICE ABOUT THE RELEASE OF THE NEW VERIZON CASE FOR THE IPHONE AND THEY SAID THEY WERE WORKING ON THE 
    DESIGN AND THAT IT SHOULD BE FOR SALE IN THE UPCOMING MONTHS......DISSAPPOINTING...I KNOW! you would think, with their cases so high in demand, that they would have already released the cases before the iphone release...they would have made more money that way but hey...what do i know..lol
    but i wanted to share this information so that people wouldnt spend their money on a case that wont fit and can wait til the RIGHT cases are up for grabs!!
    **no i DO NOT work for otterbox nor verizon.
    GOOD LUCK WITH THE SEARCH OF THE IPHONE 4!!!
    Check out OtterBox's Twitter page:
    Info on the Verizon's Iphone 4 cases
    http://twitter.com/#!/OtterBox
    Twitter comment:

  • Will the iPhone 5 cases fit the iPod Touch 5?

    Will an iPhone 5 case fit the iPod Touch 5?

    Yes, Actually it fit really well and the dimension difference is technical not physical so the iPhone case hugs the iPod comfortably and there is not rattle or movement whatsoever.
    I " don't think so" like others.. I've done this and own one!

  • Where can I get a really low-priced iPhone 3G case?

    Where can I buy a high quality, good, preferably new, iPhone 3G case that is very low in price? I'm talking below $5.
    Thanks. Remember, I want a *high quality* case that will last a while and will actually *protect my phone*.
    And try to give me something that YOU would buy if you didn't have a lot of money to spend on a case

    Hi Zahid K,
    I don't know of an iPhone case that costs less than $5, but you can find list of iPhone cases with ratings and reviews on the Apple online store.
    http://store.apple.com/us/browse/home/shopiphone/iphoneaccessories/cases?mco=MTY1NDIwMg&s=priceLH
    -Jason

  • Can I use the iPhone 5s case for the iPhone 5?

    Can I use the iPhone 5s case for the iPhone 5?

    Do cases made for iPhone 5 also work with iPhone 5s?
    While iPhone 5 and iPhone 5s have the same shape and size, the camera and LED flash are different. So cases made for iPhone 5 may affect the camera operation on iPhone 5s, and vice versa. When shopping for cases, you should choose one specifically made for the iPhone model you own.
    From Apple online Store

  • New iPhone 4 Case

    I am in the market for a new Iphone 4 case because my old Otter Box Defender case has taken a beating after a year of use. I am open to any suggestions and I do not have a specific price range or brand in mind. Any ideas as to what I should get?!

    Google for ecoover and you will find a whole bunch of them at stores.ebay.com/ecoover-covers.  I have more than one of these and owned for over a year and they are very great looking and durable and still looking pretty new now. BTW, I found the same cases in retail store that cost almost twice the price.

  • Where are the iPhone 4 cases???

    I need an iPhone 4 case now. I have already dropped my iPhone and now has a small nick on the bottom metal band. Do you guys think there will be an incase iPhone 4 case anytime soon??

    I just snagged up this iFrogz one until the bumpers are available in-store or until a better 3rd party one comes out: http://www.bestbuy.com/site/iFrogz-+Case+For+Apple+iPhone+4+-Green/1039655.p?id=1218212234856&skuId=1039655
    Not the best but I'll try to keep it nice and just return it when something better comes around

Maybe you are looking for

  • Difficulty installing Oracle 8i 8.1.1.6 on Redhat Linux 7

    Hi, I am having difficulty installing Oracle 8i 8.1.1.6 on Redhat Linux 7. The installation process runs well and the last stage when the Database Configuration Assistant is running. It successfully copies the database files but when it reaches 80% (

  • No SID found for value

    I have loaded a DSO successfully, they when I am activating it, I receive the error message "No SID found for value 4125463633 ZGL_SIRID.  However, when I look at the SID table (/BIC/SZGL_SIRID) and search for the value indicated, I see that value in

  • How to edit Vine App videos using Adobe Elements?

    Hey guys, I'm trying to edit videos to use for the Vine App but every time i go and save the work it always saves with black borders around the videos when i try to upload them. Can anyone help? I was told Vine use 480x480 resolution as MP4 videos bu

  • Report Category is blank

    Hello, my problem is the following: i want to get the report category of a program using pnp (GET PERNR). but in the program attributes, the field is empty??? thank you, <b><REMOVED BY MODERATOR></b> Eric. Message was edited by:         Alvaro Tejada

  • My ipod touch closes the games as they start to load when i want to play them?

    Like the games are already downloaded/ bought, but its when I try to actually play them!