Clear WBS field in sales order using bapi_salesorder_createfromdat2.
Hi,
Situation is this, I have a sales order, where the WBS element in the line item is populated. I want to clear that field to blank and save the sales order.
When I try to do that using the bapi_salesorder_createfromdat2, it says that it is successful, but when I go back to the sales order and see that field is still populated and not cleared. But the same field if I clear it through VA02 it works fine.
Header level update flag is set as 'U'.
I have tried setting up 'D' 'U' and 'I' for the update flag for the line item. Still no luck.
Given below is the sample code, did anybody else also faced the same issue.
Data Section.
data : sal_t_in type standard table of BAPISDHD1,
sal_s_in like line of sal_t_in.
*data : sal_t_in type standard table of BAPISDH1,
* sal_s_in like line of sal_t_in.
data : ret_t type standard table of bapiret2,
ret_s like line of ret_t.
data : partner_t type standard table of bapiparnr,
partner_s like line of partner_t.
data : item_t type standard table of bapisditm,
item_s like line of item_t.
data : item_t_inx type standard table of BAPISDITMX,
item_s_inx like line of item_t_inx.
data : schdl_t type standard table of BAPISCHDL,
schdl_s like line of schdl_t.
data : schdl_t_inx type standard table of BAPISCHDLX,
schdl_s_inx like line of schdl_t_inx.
data : ord_view type order_view.
data : sal_t_key type standard table of sales_key,
sal_s_key like line of sal_t_key.
data : ord_t_hdr type standard table of bapisdhd,
ord_s_hdr like line of ord_t_hdr.
data : ord_t_itm type standard table of bapisdit,
ord_s_itm like line of ord_t_itm.
data : hdr_inx type BAPISDHD1X.
data : hdr2_inx type BAPISDH1X.
data : qty type DZMENG.
data : logic_switch type BAPISDLS.
data : sd_doc_out type BAPIVBELN-VBELN.
data : sd_hdr_out type BAPISDHD.
data : sd_hdr_stat type BAPISDHDST.
Logic Section.
sal_s_in-doc_type = 'ZOR'.
hdr_inx-updateflag = 'U'.
ord_view-header = 'X'.
ord_view-item = 'X'.
sal_s_key-vbeln = '0000001067'.
append sal_s_key to sal_t_key.
call function 'BAPISDORDER_GETDETAILEDLIST'
exporting
i_bapi_view = ord_view
* I_MEMORY_READ =
tables
sales_documents = sal_t_key
ORDER_HEADERS_OUT = ord_t_hdr
ORDER_ITEMS_OUT = ord_t_itm
* ORDER_SCHEDULES_OUT =
* ORDER_BUSINESS_OUT =
* ORDER_PARTNERS_OUT =
* ORDER_ADDRESS_OUT =
* ORDER_STATUSHEADERS_OUT =
* ORDER_STATUSITEMS_OUT =
* ORDER_CONDITIONS_OUT =
* ORDER_COND_HEAD =
* ORDER_COND_ITEM =
* ORDER_COND_QTY_SCALE =
* ORDER_COND_VAL_SCALE =
* ORDER_CONTRACTS_OUT =
* ORDER_TEXTHEADERS_OUT =
* ORDER_TEXTLINES_OUT =
* ORDER_FLOWS_OUT =
* ORDER_CFGS_CUREFS_OUT =
* ORDER_CFGS_CUCFGS_OUT =
* ORDER_CFGS_CUINS_OUT =
* ORDER_CFGS_CUPRTS_OUT =
* ORDER_CFGS_CUVALS_OUT =
* ORDER_CFGS_CUBLBS_OUT =
* ORDER_CFGS_CUVKS_OUT =
* ORDER_BILLINGPLANS_OUT =
* ORDER_BILLINGDATES_OUT =
* ORDER_CREDITCARDS_OUT =
* EXTENSIONOUT =
loop at ord_t_itm into ord_s_itm.
move-corresponding ord_s_itm to item_s.
call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
exporting
input = item_s-WBS_ELEM
IMPORTING
OUTPUT = item_s-WBS_ELEM
*move space to item_s-WBS_ELEM.
append item_s to item_t.
endloop.
clear item_s_inx.
item_s_inx-updateflag = 'D'.
item_s_inx-wbs_elem = 'X'.
append item_s_inx to item_t_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
SALESDOCUMENTIN = '0000001067'
order_header_in = sal_s_in
ORDER_HEADER_INX = hdr_inx
* SENDER =
* BINARY_RELATIONSHIPTYPE =
* INT_NUMBER_ASSIGNMENT =
* BEHAVE_WHEN_ERROR =
* LOGIC_SWITCH =
* TESTRUN =
* CONVERT = ' '
* IMPORTING
* SALESDOCUMENT =
tables
RETURN = ret_t
ORDER_ITEMS_IN = item_t
ORDER_ITEMS_INX = item_t_inx
order_partners = partner_t
* ORDER_SCHEDULES_IN =
* ORDER_SCHEDULES_INX =
* ORDER_CONDITIONS_IN =
* ORDER_CONDITIONS_INX =
* ORDER_CFGS_REF =
* ORDER_CFGS_INST =
* ORDER_CFGS_PART_OF =
* ORDER_CFGS_VALUE =
* ORDER_CFGS_BLOB =
* ORDER_CFGS_VK =
* ORDER_CFGS_REFINST =
* ORDER_CCARD =
* ORDER_TEXT =
* ORDER_KEYS =
* EXTENSIONIN =
* PARTNERADDRESSES =
call function 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
Result I get when I execute is
S V4 233 SALES_HEADER_IN has been processed successfully VBAKKOM
S V4 233 SALES_ITEM_IN has been processed successfully VBAPKOM 000001
S V1 311 Standard order 1067 has been saved Standard order 1067
Which means it says it save successfully..but data is not changed.
Any Ideas??
Thanks and Regards,
Mahesh.
Hi,
The problem is fixed. The item inx table I was not passing the item number field, so the bapi was not knowing which line item to update.
It was a stupid overlook on my part.
Thanks and Regards,
Mahesh.
Similar Messages
-
Quantity update into sales order using BAPI_SALESORDER_CREATEFROMDAT2
Hi All,
I am able to create a sales order using the BAPI "BAPI_SALESORDER_CREATEFROMDAT2".
But even after assinging the Target_quntity and the Target_quantity_units, the values are not getting updated into the Sales order, but the sales order gets created .
Did anyone of you had a similare problem, how was it solved.
cold some one please help me out on this.
RegardsHi
I had used below code (using <b>BAPI_SALESORDER_CREATEFROMDAT1</b>)..but never faced any problem.. you can try the same...
Regards,
Raj
REPORT z_sd_salesorder_create
NO STANDARD PAGE HEADING
LINE-SIZE 150
MESSAGE-ID zz.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_ppl,
ppl_order(18), " ppl Orderno
auart(4), " Sales Doc Type
vkorg(4), " Sales Organization
vtweg(2), " Distribution Channel
spart(2), " Division
div(3), " Division
kunnr(10), " Sold-to Party
date(10), " Doc Dt
matnr(18), " Item Matnr#
uom(3), " UOM
qty(15), " Qty
kschl(4), " Pricing condiiton type
kbetr(11), " Rate
END OF x_ppl.
TYPES: BEGIN OF x_file,
loc(30), " Location
div(3), " Division
ppl_order(18), " ppl Orderno
kunnr(10), " Sold-to Party
date(10), " Doc Dt
matnr(20), " Item Matnr#
qty(15), " Qty
uom(3), " UOM
kbetr(11), " Rate
discount(5), " Discount
END OF x_file.
TYPES: BEGIN OF x_output,
ppl_order(18), " ppl Orderno
mesg(130), " Mesg Success/Error
END OF x_output.
TYPES: BEGIN OF x_werks,
name2(30), " Location
werks TYPE werks_ext, " Plant
END OF x_werks.
TYPES: BEGIN OF x_info,
vkorg TYPE vkorg , " Sales org
vtweg TYPE vtweg, " Dist channel
werks TYPE werks_ext," Plant
spart TYPE spart, " Storage Loc
END OF x_info.
TYPES: BEGIN OF x_material,
ppl_prdid(20), " ppl Prd id
matnr TYPE matnr, " Material (SAP)
END OF x_material.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_file TYPE STANDARD TABLE OF x_file WITH HEADER LINE." File Data
DATA: it_data TYPE STANDARD TABLE OF x_ppl WITH HEADER LINE." ppl File
DATA: it_out TYPE STANDARD TABLE OF x_output WITH HEADER LINE. " Outcome
DATA: it_werks TYPE STANDARD TABLE OF x_werks WITH HEADER LINE. " Plant
DATA: it_info TYPE STANDARD TABLE OF x_info WITH HEADER LINE. " Othr Info
DATA: it_matnr TYPE STANDARD TABLE OF x_material WITH HEADER LINE. " Material Info
DATA: it_item TYPE STANDARD TABLE OF bapiitemin WITH HEADER LINE. "Order Itm data
DATA: it_partner TYPE STANDARD TABLE OF bapipartnr WITH HEADER LINE. "Order Partner data
V A R I A B L E S D E C L A R A T I O N S *
DATA : v_correct TYPE i,
v_error TYPE i,
v_total TYPE i,
v_return LIKE bapireturn1,
v_index LIKE sy-tabix.
*- Return values
DATA: it_orderh TYPE bapisdhead, "Order Hdr data
order TYPE bapivbeln-vbeln,
soldto TYPE bapisoldto,
shipto TYPE bapishipto,
return TYPE bapireturn1.
DATA: hdate TYPE sy-datum.
U S E R I N P U T S S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY. " File name
SELECTION-SCREEN END OF BLOCK blk01.
S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_upload.
PERFORM validate_data. " Validate the data
PERFORM data_swap. " Prepare the data for processing
IF NOT it_data[] IS INITIAL.
PERFORM get_update. " Create SalesOrders
ELSE.
MESSAGE i001(zz) WITH text-001.
STOP.
ENDIF.
E n d o f S e l e c t i o n *
END-OF-SELECTION.
IF NOT it_data[] IS INITIAL.
PERFORM get_write.
ENDIF.
*& Form get_file
Get File name
FORM get_file .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = syst-repid
mask = '*'
CHANGING
file_name = p_file
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_file
*& Form get_upload
to upload the file
FORM get_upload .
DATA l_file TYPE string.
CLEAR: it_file, it_file[].
l_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSEIF sy-subrc = 0.
SORT it_file BY loc ppl_order.
ENDIF.
ENDFORM. " get_upload
*& Form get_update
Creating mapping Data in Z table
FORM get_update .
DATA: l_itemno(2) TYPE n,
l_partner TYPE parvw,
l_kunnr TYPE kunnr,
l_matnr TYPE matnr,
l_mesg TYPE string,
l_kbetr TYPE p DECIMALS 2.
DATA: l_in_qty LIKE vbap-zmeng,
l_meins LIKE mara-meins,
l_qty LIKE vbap-zmeng.
CLEAR: v_correct, v_error, v_total.
SORT it_data BY ppl_order.
LOOP AT it_data.
CLEAR v_index.
v_index = sy-tabix.
*- New SalesOrder
AT NEW ppl_order.
READ TABLE it_data INDEX v_index.
CLEAR: it_orderh, it_item, it_partner,
order, soldto, shipto, return,
it_item[], it_partner[].
v_total = v_total + 1. "Increment Total SalesOrders counter
CLEAR l_itemno.
l_itemno = '10'.
*- Covert date fields into Internal format
CALL FUNCTION 'CONVERT_DATE_TO_INTERN_FORMAT'
EXPORTING
datum = it_data-date
dtype = 'DATS'
IMPORTING
idate = it_data-date.
*- Populate SalesOrder header data.
CALL FUNCTION 'CONVERSION_EXIT_AUART_INPUT'
EXPORTING
input = it_data-auart
IMPORTING
output = it_data-auart.
it_orderh-doc_type = it_data-auart.
it_orderh-sales_org = it_data-vkorg.
it_orderh-distr_chan = it_data-vtweg.
it_orderh-division = it_data-spart.
it_orderh-purch_no = 'DEPOT'.
it_orderh-price_date = it_data-date. "Doc Dt
it_orderh-req_date_h = it_data-date. "Del.Dt
it_orderh-purch_no_s = it_data-ppl_order.
*- Partner data
CLEAR: l_partner, l_kunnr.
*- Convert Partner type into internal format
l_partner = 'SP'. "SoldTo Party
CALL FUNCTION 'CONVERSION_EXIT_PARVW_INPUT'
EXPORTING
input = l_partner
IMPORTING
output = l_partner.
*- Convert Customer into internal format
l_kunnr = it_data-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = l_kunnr
IMPORTING
output = l_kunnr.
it_partner-partn_role = l_partner.
it_partner-partn_numb = l_kunnr.
APPEND it_partner.
CLEAR it_partner.
ENDAT.
*- Item data
it_item-itm_number = l_itemno.
*- Convert material number into internal format
CLEAR l_matnr.
l_matnr = it_data-matnr.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = l_matnr
IMPORTING
output = l_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
it_item-material = l_matnr.
*- Call FM to get new qty based on SAP UOM
CLEAR: l_meins, l_qty, l_in_qty.
l_in_qty = it_data-qty.
CALL FUNCTION 'Z_GET_QTY_FROM_UOM'
EXPORTING
matnr = it_item-material
in_meins = it_data-uom
in_qty = l_in_qty
IMPORTING
out_meins = l_meins
quantity = l_qty.
IF sy-subrc = 0.
it_data-qty = l_qty.
it_data-uom = l_meins.
ENDIF.
it_data-qty = it_data-qty * 1000.
it_item-req_qty = it_data-qty.
it_item-sales_unit = it_data-uom.
it_item-req_date = it_data-date.
*- Pricing data
it_item-cond_type = it_data-kschl. "Pricing condition
CLEAR l_kbetr.
l_kbetr = it_data-kbetr / 10. "Price (Rate)
it_item-cond_value = l_kbetr.
APPEND it_item.
CLEAR it_item.
*- Increment Item counter.
l_itemno = l_itemno + 10.
*- At end of SalesOrder
AT END OF ppl_order.
READ TABLE it_data INDEX v_index.
*- Call the BAPI for SalesOrder creation
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
order_header_in = it_orderh
IMPORTING
salesdocument = order
sold_to_party = soldto
ship_to_party = shipto
return = return
TABLES
order_items_in = it_item
order_partners = it_partner.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
v_return = return+0(1).
IF v_return = 'E'.
v_error = v_error + 1.
CLEAR l_mesg.
l_mesg = return.
CONDENSE l_mesg.
ELSE.
v_correct = v_correct + 1.
CLEAR l_mesg.
CONCATENATE 'Salesorder'(007) order 'successfully created.'(008)
INTO l_mesg SEPARATED BY space.
CONDENSE l_mesg.
ENDIF.
*- Populate the output table
CLEAR it_out.
it_out-ppl_order = it_data-ppl_order.
it_out-mesg = l_mesg.
APPEND it_out.
CLEAR it_out.
ENDAT.
ENDLOOP.
ENDFORM. " get_update
*& Form get_write
Write the results
FORM get_write .
WRITE:/ 'Total Number of Records :'(002), v_total COLOR 1.
WRITE:/ 'Total Correct Records :'(003), v_correct COLOR 3.
WRITE:/ 'Total Error Records :'(004), v_error COLOR 6.
SKIP 3.
IF NOT it_out[] IS INITIAL.
WRITE:/5 'ppl Order #'(005),
28 'Message'(006).
ENDIF.
SKIP 1.
LOOP AT it_out.
WRITE:/5 it_out-ppl_order,
28 it_out-mesg.
ENDLOOP.
ENDFORM. " get_write
*& Form validate_data
Validate the data
FORM validate_data .
DATA: l_bstkde TYPE bstkd_e.
LOOP AT it_file.
SELECT bstkd_e INTO l_bstkde
UP TO 1 ROWS
FROM vbkd
WHERE bstkd_e = it_file-ppl_order.
ENDSELECT.
IF sy-subrc = 0. " This ppl Order is already been created in SAP, so delete record
DELETE it_file.
ENDIF.
ENDLOOP.
SORT it_file BY ppl_order.
ENDFORM. " validate_data
*& Form data_swap
Prepare the data for processing
FORM data_swap .
CLEAR: it_werks, it_info, it_matnr, it_data,
it_werks[], it_info[], it_matnr[], it_data[].
IF NOT it_file[] IS INITIAL.
*- Get the plant from location
SELECT name2
werks
INTO CORRESPONDING FIELDS OF TABLE it_werks
FROM t001w FOR ALL ENTRIES IN it_file
WHERE name2 = it_file-loc.
IF sy-subrc = 0.
SORT it_werks BY name2 werks.
*- Get the Sales Org, Division and Distribution Channel
IF NOT it_werks[] IS INITIAL.
SELECT vkorg
vtweg
werks
INTO CORRESPONDING FIELDS OF TABLE it_info
FROM tvkwz FOR ALL ENTRIES IN it_werks
WHERE werks = it_werks-werks.
IF sy-subrc = 0.
LOOP AT it_info.
it_info-spart = '99'.
MODIFY it_info INDEX sy-tabix.
ENDLOOP.
SORT it_info BY vkorg vtweg werks.
ENDIF.
ENDIF.
ENDIF.
*- Get material from ppl material
SELECT ppl_prdid
matnr
FROM zppl_master
INTO TABLE it_matnr FOR ALL ENTRIES IN it_file
WHERE ppl_prdid = it_file-matnr.
IF sy-subrc = 0.
SORT it_matnr BY ppl_prdid matnr.
ENDIF.
ENDIF.
*- Update the data in it_data
LOOP AT it_file.
CLEAR it_data.
it_data-auart = 'OR'.
it_data-auart = 'OR'. " CHANGED BY Jo ON 3103005
READ TABLE it_werks WITH KEY name2 = it_file-loc BINARY SEARCH.
IF sy-subrc = 0.
READ TABLE it_info WITH KEY werks = it_werks-werks BINARY SEARCH.
IF sy-subrc = 0.
it_data-vkorg = it_info-vkorg.
it_data-vtweg = it_info-vtweg.
ENDIF.
ENDIF.
*- Material
READ TABLE it_matnr WITH KEY ppl_prdid = it_file-matnr BINARY SEARCH.
IF sy-subrc = 0.
it_data-matnr = it_matnr-matnr.
ENDIF.
it_data-ppl_order = it_file-ppl_order.
it_data-date = it_file-date.
CONCATENATE it_file-kunnr it_file-loc+1(2) INTO it_data-kunnr.
it_data-qty = it_file-qty.
it_data-uom = it_file-uom.
it_data-kbetr = it_file-kbetr.
*- Pricing condition
it_data-kschl = 'PR00'.
CASE it_file-div.
WHEN 'BRN'.
it_data-div = '04'.
WHEN 'GEN'.
it_data-div = '03'.
WHEN 'IVF'.
it_data-div = '02'.
WHEN 'OPH'.
it_data-div = '01'.
ENDCASE.
it_data-spart = it_data-div.
APPEND it_data.
CLEAR it_data.
ENDLOOP.
ENDFORM. " data_swap -
Error when creating sales order using BAPI_SALESORDER_CREATEFROMDAT2
Hello!
I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating the Sales order. But I have a problem when Iu2019m trying to create configuration. I think that parameter order_items_in-material should be generated before calling BAPI described above. I try to use order_items_in-mat_entrd, but BAPI return error message id = V1, number = 320 (No item category available (Table T184 ZAPC TEXT )).
Help me please, How I can solve this problem?<P><STRONG>FUNCTION Z_SD_GET_TEH_COST.<BR>"----<BR>" IMPORTING<BR>" REFERENCE(IS_COST_ORDER) TYPE ZWCLIF_COST_ORDER<BR>" EXPORTING<BR>" REFERENCE(EV_KBETR) TYPE KBETR<BR>"----
</STRONG></P>
<P><STRONG> DEFINE fill_prizn.<BR> IF is_cost_order-&1 IS NOT INITIAL.<BR> CLEAR: ls_cfgs_value-charc,<BR> ls_cfgs_value-value.<BR> ls_cfgs_value-charc = &2.<BR> ls_cfgs_value-value = is_cost_order-&1.<BR>* ls_cfgs_value-valcode = '1'.<BR> APPEND ls_cfgs_value TO lt_cfgs_value.<BR> ENDIF.<BR> END-OF-DEFINITION.</STRONG></P>
<P><STRONG>DATA: ls_header_in TYPE bapisdhd1,<BR> ls_header_inx TYPE bapisdhd1x,</STRONG></P>
<P><STRONG> lt_partners TYPE TABLE OF bapiparnr,<BR> ls_partners TYPE bapiparnr,</STRONG></P>
<P><STRONG> lt_items_in TYPE TABLE OF bapisditm,<BR> lt_items_inx TYPE TABLE OF bapisditmx,</STRONG></P>
<P><STRONG> ls_items_in TYPE bapisditm,<BR> ls_items_inx TYPE bapisditmx,</STRONG></P>
<P><STRONG> ls_cfgs_ref TYPE bapicucfg,<BR> lt_cfgs_ref TYPE TABLE OF bapicucfg,</STRONG></P>
<P><STRONG> lt_cfgs_value TYPE TABLE OF bapicuval,<BR> ls_cfgs_value TYPE bapicuval,</STRONG></P>
<P><STRONG> lt_schedules_in TYPE TABLE OF bapischdl,<BR> ls_schedules_in TYPE bapischdl,</STRONG></P>
<P><STRONG> lt_schedules_inx TYPE TABLE OF bapischdlx,<BR> ls_schedules_inx TYPE bapischdlx,</STRONG></P>
<P><STRONG> lt_cfgs_inst TYPE TABLE OF bapicuins,<BR> ls_cfgs_inst TYPE bapicuins,<BR> lt_cfgs_partof TYPE TABLE OF bapicuprt,<BR> ls_cfgs_partof TYPE bapicuprt,</STRONG></P>
<P><STRONG> lv_vbeln TYPE bapivbeln-vbeln,<BR> lt_return TYPE TABLE OF bapiret2.</STRONG></P>
<P><STRONG>* fill header<BR> ls_header_in-doc_type = 'ZAPC'.<BR> ls_header_in-sales_org = is_cost_order-vkorg.<BR> ls_header_in-distr_chan = is_cost_order-vtweg.<BR> ls_header_in-division = '01'.<BR> ls_header_in-sales_off = '1011'.</STRONG></P>
<P><STRONG> ls_header_inx-updateflag = 'I'.<BR> ls_header_inx-doc_type = 'X'.<BR> ls_header_inx-sales_org = 'X'.<BR> ls_header_inx-distr_chan = 'X'.<BR> ls_header_inx-division = 'X'.<BR> ls_header_inx-sales_off = 'X'.</STRONG></P>
<P><STRONG>* fill partners<BR> ls_partners-partn_role = 'AG'.<BR> ls_partners-partn_numb = '1000000031'. " фиктивный заказчик<BR> APPEND ls_partners TO lt_partners.</STRONG></P>
<P><STRONG>* ls_items_in-material = is_cost_order-matnr.<BR> ls_items_in-mat_entrd = is_cost_order-matnr.<BR> ls_items_in-target_qty = '1'.<BR> ls_items_in-itm_number = '000001'.<BR> ls_items_in-po_itm_no = '000001'.<BR> ls_items_in-item_categ = 'ZCRM'.<BR> SELECT SINGLE meins INTO ls_items_in-target_qu<BR> FROM mara<BR> WHERE matnr = is_cost_order-matnr.<BR> APPEND ls_items_in TO lt_items_in.</STRONG></P>
<P><STRONG> ls_items_inx-itm_number = '000001'.<BR> ls_items_inx-item_categ = 'X'.<BR> ls_items_inx-po_itm_no = 'X'.<BR>* ls_items_inx-material = 'X'.<BR> ls_items_inx-mat_entrd = 'X'.<BR> ls_items_inx-target_qty = 'X'.<BR> ls_items_inx-target_qu = 'X'.<BR> ls_items_inx-updateflag = 'I'.<BR> APPEND ls_items_inx TO lt_items_inx.</STRONG></P>
<P><STRONG>* fill configuration<BR> ls_cfgs_ref-posex = '000001'.<BR> ls_cfgs_ref-config_id = '000001'.<BR> ls_cfgs_ref-root_id = '00000001'.<BR> APPEND ls_cfgs_ref TO lt_cfgs_ref.</STRONG></P>
<P><STRONG> ls_cfgs_value-config_id = '000001'.<BR> ls_cfgs_value-inst_id = '00000001'.</STRONG></P>
<P><STRONG> fill_prizn kod_prod 'KOD_PROD'.<BR> fill_prizn tlot_min 'TLOT_MIN'.<BR> fill_prizn tlot_max 'TLOT_MAX'.<BR> fill_prizn shot_min 'SHOT_MIN'.<BR> fill_prizn shot_max 'SHOT_MAX'.<BR> fill_prizn dlot_min 'DLOT_MIN'.<BR> fill_prizn dlot_max 'DLOT_MAX'.<BR> fill_prizn marka 'MARKA'.<BR> fill_prizn stndrt_marka 'STNDRT_MARKA'.<BR> fill_prizn stndrt_prod 'STNDRT_PROD'.<BR> fill_prizn tprk 'TPRK'.<BR> fill_prizn grot 'GROT'.<BR> fill_prizn vityazhka 'VITYAZHKA'.<BR> fill_prizn krom 'KROM'.<BR> fill_prizn chisl_st_pokr 'CHISL_ST_POKR'.<BR> fill_prizn kls_tol_pokr 'KLS_TOL_POKR'.<BR> fill_prizn proch_izg_t_lic_max 'PROCH_IZG_T_LIC_MAX'.<BR> fill_prizn priz_zasch_pov 'PRIZ_ZASCH_POV'.<BR> fill_prizn vid_pokr 'VID_POKR'.<BR> fill_prizn mark_pokr 'MARK_POKR'.<BR> fill_prizn mat_pokr_lic 'MAT_POKR_LIC'.<BR> fill_prizn plsk 'PLSK'.<BR> fill_prizn vid_postavki 'VID_POSTAVKI'.<BR> fill_prizn dressir 'DRESSIR'.<BR> fill_prizn travl 'TRAVL'.<BR> fill_prizn fsfr_min 'FSFR_MIN'.<BR> fill_prizn fsfr_max 'FSFR_MAX'.<BR> fill_prizn krmn_min 'KRMN_MIN'.<BR> fill_prizn krmn_max 'KRMN_MAX'.<BR> fill_prizn mrgn_min 'MRGN_MIN'.<BR> fill_prizn mrgn_max 'MRGN_MAX'.<BR> fill_prizn almn_min 'ALMN_MIN'.<BR> fill_prizn almn_max 'ALMN_MAX'.<BR> fill_prizn cugl_min 'CUGL_MIN'.<BR> fill_prizn cugl_max 'CUGL_MAX'.</STRONG></P>
<P><STRONG> ls_schedules_in-itm_number = '000001'.<BR>* ls_schedules_in-req_date = sy-datum.<BR> ls_schedules_in-sched_line = '0001'.<BR> ls_schedules_in-req_qty = '1'.<BR> APPEND ls_schedules_in TO lt_schedules_in.</STRONG></P>
<P><STRONG> ls_schedules_inx-itm_number = '000001'.<BR> ls_schedules_inx-sched_line = '0001'.<BR>* ls_schedules_inx-req_date = 'X'.<BR> ls_schedules_inx-req_qty = 'X'.<BR> ls_schedules_inx-updateflag = 'I'.<BR> APPEND ls_schedules_inx TO lt_schedules_inx.</STRONG></P>
<P><STRONG> ls_cfgs_partof-parent_id = '00000001'.<BR> ls_cfgs_partof-inst_id = '00000001'.<BR> ls_cfgs_partof-class_type = '300'.<BR> ls_cfgs_partof-obj_type = 'MARA'.<BR> ls_cfgs_partof-obj_key = is_cost_order-matnr.<BR> APPEND ls_cfgs_partof TO lt_cfgs_partof.</STRONG></P>
<P><STRONG> ls_cfgs_inst-config_id = '000001'.<BR> ls_cfgs_inst-inst_id = '00000001'.<BR> ls_cfgs_inst-obj_type = 'MARA'.<BR> ls_cfgs_inst-class_type = '300'.<BR> ls_cfgs_inst-obj_key = is_cost_order-matnr.<BR> APPEND ls_cfgs_inst TO lt_cfgs_inst.</STRONG></P>
<P><STRONG> CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'<BR> EXPORTING<BR> order_header_in = ls_header_in<BR> order_header_inx = ls_header_inx<BR>* testrun =<BR> IMPORTING<BR> salesdocument = lv_vbeln<BR> TABLES<BR> return = lt_return<BR> order_items_in = lt_items_in<BR> order_items_inx = lt_items_inx<BR> order_partners = lt_partners<BR> order_schedules_in = lt_schedules_in<BR> order_schedules_inx = lt_schedules_inx<BR> order_cfgs_ref = lt_cfgs_ref<BR> order_cfgs_inst = lt_cfgs_inst<BR> order_cfgs_part_of = lt_cfgs_partof<BR> order_cfgs_value = lt_cfgs_value<BR> .</STRONG></P>
<P><STRONG> READ TABLE lt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'.<BR> IF sy-subrc = 0.<BR> CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'<BR> .<BR> ELSE.<BR> CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'<BR> EXPORTING<BR> wait = 'X'<BR> .<BR> ENDIF.</STRONG></P>
<P><STRONG>ENDFUNCTION.</STRONG></P>
<P><STRONG></STRONG> </P>
<P><STRONG></STRONG> </P> -
Creating Sales Order using BAPI_SALESORDER_CREATEFROMDAT2
Hi All,
I am having problem while creating a SO using the BAPI_SALESORDER_CREATEFROMDAT2, Its returning sales documnet type is not defined. I used to get the error to speciy the ship to party or sold party earlier that has been resloved now I am getting the above specifed error.
Please help me its very urgent
Thanks,
SumaHi Suma
While populating data for Sales Order Creation, populate PARTNER table with Sold-To or Ship-To as per you business process.
Minimum two fields are to the fields for this structure:PARTN_ROLE , PARTN_NUMB
PARTN_ROLE ---> " Partner Role, which specifies the partner type i.e Sold-To, Ship-To, Bill-To ...
ARTN_NUMB ---> " Customer Number
Regards
Eswar -
Error in Creating Sales Order Using BAPI_SALESORDER_CREATEFROMDAT2
Hi Everyone,
We have a requirement to create sales order from flat file using BAPI. Everything was working well until we encounter a customer with credit control limit setup.
Using the partners table for BAPi, the sold to customer is enter at header level, and we have this requirement to add the payer at item level. This is where the error is occuring. Upon debugging, I found out that the customer has a credit limit setup at FD33, and has a record found in KNKK, which is giving the error "Credit limit customer differs from credit limit customer in header".
However, duting manual creation of sales order via VA01, this error is not encountered.
Any ideas or suggesstions on how we can move forward with SO creation using BAPI with customers where credit management is setup?
Thanks,
LouisseIf thats not working..
try BAPI_SALESORDER_CREATEFROMDAT2
If BAPI is not working. try creating a bdc for the same if there's not error on trying from VA01 -
Problem when creating a sales order using BAPI_SALESORDER_CREATEFROMDAT2
Hello All,
I am working on a requirement where i need to create a new sales order from old sales order (Not all the items of the old sales order are to be copied) i am doing this by getting the data using BAPISDORDER_GETDETAILEDLIST to get the old sales order details and send them to BAPI_SALESORDER_CREATEFROMDAT2.
My problem is that i when i send the condition also the system in addition to the conditions sent to the BAPI is also automatically proposing the condition types . So the final result is that the sales order ends up having the condition types twice .
For example VPRS AZWR are visible twice in the sales order.
Any inputs to solve the problem will be definitely rewarded.
Thanks in advance.
Regards,
Sowmya.Hello All,
I am working on a requirement where i need to create a new sales order from old sales order (Not all the items of the old sales order are to be copied) i am doing this by getting the data using BAPISDORDER_GETDETAILEDLIST to get the old sales order details and send them to BAPI_SALESORDER_CREATEFROMDAT2.
My problem is that i when i send the condition also the system in addition to the conditions sent to the BAPI is also automatically proposing the condition types . So the final result is that the sales order ends up having the condition types twice .
For example VPRS AZWR are visible twice in the sales order.
Any inputs to solve the problem will be definitely rewarded.
Thanks in advance.
Regards,
Sowmya. -
How to update pick up date (VBAK-ABHOD) field in sales order
I am creating sales orders using BAPI_SALESORDER_CREATEFROMDAT2 but it is not updating VBAK-ABHOD field i .e pick up date. Is there any FM which updates the pick up date VBAK-ABHOD also.
I need to update pick up date for a special type of sales orders (Delivery orders) which are created in reference to schedule agreement.
Is there any other way we can update pick up date. My last option is BDC but donot want to use it.
Thanks in Advance.
Rajesh.Hi Rajesh,
You can not find any field in BAPI Change Or Create for sales order even header change BADI is for SAP Modification only. The best way to code in form USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ, orelse you can use CALL TRANSACTION Method.
Please let me know if you have any issues.
Thanks and regards, -
Create sales order with BAPI_SALESORDER_CREATEFROMDAT2 example
Hi, does anyone have a working example of how to create a sales order using BAPI_SALESORDER_CREATEFROMDAT2?
Thankshi Robert,
Check this code...try to map.
one order with total sum of effort
clear: l_order_header,
l_salesdocument,
l_order_partners,
l_order_items,
l_order_schdl.
refresh: it_order_items,
it_order_partners,
it_order_schdl,
it_return.
???????? get from material ...
Order header
l_order_header-doc_type = 'ZQBV'.
l_order_header-distr_chan = '10'.
l_order_header-division = '00'.
if g_qals-werk eq '1100'.
l_order_header-sales_org = '1000'.
else.
if g_qals-werk eq '3100'.
l_order_header-sales_org = '3000'.
else.
message i001(00) with text-005.
endif.
endif.
l_order_header-purch_no_c = g_qals-prueflos. " <= lot
Partner data
l_order_partners-partn_role = 'AG'.
l_order_partners-partn_numb = g_qals-kunnr.
append l_order_partners to it_order_partners.
Order items => only one
l_order_items-itm_number = 10.
l_order_items-material = g_qals-matnr.
l_order_items-target_qty = 1.
append l_order_items to it_order_items.
Schedules for quantity
l_order_schdl-itm_number = 10.
l_order_schdl-req_qty = 1. " <= only 1 !
append l_order_schdl to it_order_schdl.
Conditions for value
l_order_conditions-itm_number = 10.
l_order_conditions-cond_type = 'PR00'.
l_order_conditions-cond_value = g_effort_sum.
l_order_conditions-currency = g_effort_unit.
append l_order_conditions to it_order_conditions.
BAPI to create sales order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = l_order_header
ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = l_salesdocument
TABLES
RETURN = it_return
ORDER_ITEMS_IN = it_order_items
ORDER_ITEMS_INX =
ORDER_PARTNERS = it_order_partners
ORDER_SCHEDULES_IN = it_order_schdl
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN = it_order_conditions
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
if not l_salesdocument is initial.
order successfully created
message i001(00) with text-001 l_salesdocument.
endif.
endif.
for more info check the below link also
Problem with BAPI_SALESORDER_CREATEFROMDAT2
Regards,
Naveen -
Create a Sales order with reference to another sales order using BAPI
Dear All,
Can any one tell me what are all the parameters required to create a Sales order with reference to another sales order using BAPI_SALESORDER_CREATEFROMDAT2....
Thanks in advanceHi Madhan
Thanks a lot for your reply.
However, I would like to know which parameters need to passed in this BAPI in case of SO creation with reference. I beleive there are only a few parameters that need to passed in ORDER_HEADER_IN, ORDER_ITEMS_IN, etc.
Need to know exactly which are these parameters.
Regards
Mihir Shah. -
Problem regarding the creation of sales order using bapi.
Hai all,
I am creating sales order using bapi but i am, get following error messages :
TYPE ID NUMBER MESSAGE
E VP 112 Please enter sold-to party or ship-to party
E V4 219 Sales document was not changed
I have entered all the parameters.
my program is as follows :
*& Report ZSD_SALES_ORDER
REPORT ZSD_SALES_ORDER.
Tables
*table definitions
TABLES:vbak, "Sales Document: Header Data
knvv, "Customer Master Sales Data
mara, "General Material Data
t001l, "Plants/Branches
mvke, "Sales Data for Material
vbap, "Sales Document: Item Data
konv. "Conditions (Transaction Data)
Types
*type for upload data
TYPES :BEGIN OF ty_upload,
matnr(20) TYPE c, " Old material number
quantity(20) TYPE c, " Cumulative order quantity in sales units
VALUE TYPE BAPIKWERT1,
value(20) TYPE c, " Condition value
value TYPE konv-kwert, " Condition value
END OF ty_upload.
*type for final output table
TYPES :BEGIN OF ty_main,
bismt TYPE mara-bismt, "Old material number
matnr TYPE vbap-matnr, "Material Number
kunnr TYPE vbak-kunnr, "customer number
auart TYPE vbak-auart, "Sales Document Type
vkorg TYPE vbak-vkorg, "Sales Organization
vtweg TYPE vbak-vtweg, "Distribution Channel
spart TYPE vbak-spart, "Division
vbeln TYPE vbak-vbeln, "Sales document
werks TYPE marc-werks, " Plant
lgort TYPE mard-lgort, "Storage Location
posnr TYPE vbap-posnr, "Sales Document Item
parvw TYPE vbpa-parvw, "Partner function
kwmeng TYPE vbap-kwmeng, "Cumulative order quantity in sales units
kschl TYPE konv-kschl, "Condition type
kwert TYPE konv-kwert, "Condition value
KWERT TYPE BAPIKWERT1,
kwert(20) TYPE c, "Condition value
waers TYPE konv-waers, "Currency
END OF ty_main.
*type for old material number
TYPES: BEGIN OF ty_matnr,
matnr TYPE mara-matnr,
bismt TYPE mara-bismt,
END OF ty_matnr.
*type for order number
TYPES :BEGIN OF ty_output,
vbeln TYPE vbak-vbeln, "Sales Document
END OF ty_output.
Constants Begin with C_ *
CONSTANTS:
c_zpmu(4) TYPE c VALUE 'ZPMU',
c_zpmm(4) TYPE c VALUE 'ZPMM'.
DATA: c_ch(1) TYPE c VALUE 'X'.
Data Begin with W_ *
*global data for validations
DATA: w_count TYPE i,
w_vkorg TYPE vbak-vkorg,
w_vtweg TYPE vbak-vtweg,
w_spart TYPE vbak-spart,
w_werks TYPE t001l-werks,
w_check TYPE c,
w_itemno TYPE posnr_va,
W_COND TYPE C.
w_cond(3) TYPE c.
Internal tables Begin with IT_ *
*internal table definitions
DATA : it_upload TYPE STANDARD TABLE OF ty_upload ,
wa_upload TYPE ty_upload.
DATA : it_main TYPE STANDARD TABLE OF ty_main,
wa_main TYPE ty_main.
DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr,
wa_matnr TYPE ty_matnr.
DATA : it_output TYPE STANDARD TABLE OF ty_output.
Internal table for BAPI.
DATA: it_bapisdhd1 TYPE STANDARD TABLE OF bapisdhd1, "Sales and Distribution Document Header
wa_bapisdhd1 TYPE bapisdhd1.
DATA: it_bapisditm TYPE STANDARD TABLE OF bapisditm , "Sales and Distribution Document Item
wa_bapisditm TYPE bapisditm.
DATA: it_bapiparnr TYPE STANDARD TABLE OF bapiparnr, "SD Document Partner: WWW
wa_bapiparnr TYPE bapiparnr.
DATA: it_bapischdl TYPE STANDARD TABLE OF bapischdl, "Schedule Lines
wa_bapischdl TYPE bapischdl.
DATA: it_bapicond TYPE STANDARD TABLE OF bapicond, "Communication Fields for Maintaining Conditions in the Order
wa_bapicond TYPE bapicond.
DATA: it_bapiret2 TYPE STANDARD TABLE OF bapiret2, "Return Parameter
wa_bapiret2 TYPE bapiret2.
Parameters Begin with PR_ *
*selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME .
PARAMETERS: pr_vkorg TYPE vbak-vkorg OBLIGATORY,
pr_vtweg TYPE vbak-vtweg OBLIGATORY,
pr_spart TYPE vbak-spart OBLIGATORY,
pr_kunnr TYPE kna1-kunnr OBLIGATORY,
pr_werks TYPE marc-werks OBLIGATORY,
pr_lgort TYPE mard-lgort OBLIGATORY.
PARAMETERS: pr_auart TYPE vbak-auart OBLIGATORY,
PR_AUGRU TYPE VBAK-AUGRU OBLIGATORY.
pr_augru TYPE vbak-augru.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME.
PARAMETERS : pr_file TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk2.
At selection-screen *
AT SELECTION-SCREEN.
PERFORM f006_validate_vkorg.
PERFORM f007_validate_vtweg.
PERFORM f008_validate_spart.
PERFORM f009_validate_kunnr.
PERFORM f010_validate_werks.
PERFORM f011_validate_lgort.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_file.
*for f4 help----
PERFORM f003_f4_help.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
*for material ,quantity and value upload
PERFORM f001_upload_file.
*get data
PERFORM f003_get_data.
*for check the data
PERFORM f002_check_data .
PERFORM f004_process.
*for posting
PERFORM f005_posting.
END-OF-SELECTION.
E N D O F S E L E C T I O N *
*& Form f001_upload_file
upload file
FORM f001_upload_file .
DATA : lw_fname TYPE string.
CLEAR lw_fname.
lw_fname = pr_file.
REFRESH it_upload.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lw_fname
filetype = 'ASC'
has_field_separator = c_ch
TABLES
data_tab = it_upload
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_upload INTO wa_upload.
wa_upload-value = ( wa_upload-value ) / 10.
MODIFY it_upload FROM wa_upload.
ENDLOOP.
ENDFORM. "F001_UPLOAD_FILE
*& Form f003_f4_help
f4 help
FORM f003_f4_help .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = ' '
IMPORTING
file_name = pr_file.
ENDFORM. " f003_f4_help
*& Form check_data
text
FORM f002_check_data .
DATA: lw_lines TYPE i.
DESCRIBE TABLE it_main LINES lw_lines.
IF lw_lines LE 0.
RETURN.
ENDIF.
SELECT a~matnr
a~bismt FROM mara AS a INNER JOIN mvke AS b
ON amatnr = bmatnr
INTO CORRESPONDING FIELDS OF TABLE it_matnr
FOR ALL ENTRIES IN it_main
WHERE a~bismt = it_main-bismt.
IF sy-subrc = 0.
LOOP AT it_main INTO wa_main.
CLEAR : wa_matnr.
READ TABLE it_matnr INTO wa_matnr WITH KEY bismt = wa_main-bismt.
IF sy-subrc = 0.
MOVE: wa_matnr-matnr TO wa_main-matnr.
ENDIF.
MODIFY it_main FROM wa_main TRANSPORTING matnr WHERE bismt = wa_main-bismt.
ENDLOOP.
ELSE.
MESSAGE e000(zmsd) WITH text-001.
ENDIF.
ENDFORM. "CHECK_DATA
*& Form F009_validate_vkorg
text
FORM f006_validate_vkorg .
CLEAR w_vkorg.
SELECT SINGLE vkorg
INTO w_vkorg FROM tvko
WHERE vkorg EQ pr_vkorg.
IF sy-subrc <> 0.
MESSAGE e000(zmsd) WITH text-012 pr_vkorg.
ENDIF.
ENDFORM. " F009_validate_vkorg
*& Form f007_validate_vtweg
text
FORM f007_validate_vtweg .
CLEAR:w_vtweg.
SELECT SINGLE vtweg
INTO w_vtweg FROM tvtw
WHERE vtweg EQ pr_vtweg.
IF sy-subrc <> 0.
MESSAGE e089(zmsd).
ENDIF.
ENDFORM. " f007_validate_vtweg
*& Form f008_validate_spart
text
FORM f008_validate_spart .
CLEAR:w_spart.
SELECT SINGLE spart
INTO w_spart FROM tspa
WHERE spart EQ pr_spart.
IF sy-subrc <> 0.
MESSAGE e087(zmsd).
ENDIF.
ENDFORM. " f008_validate_spart
*& Form F010_validate_kunnr
text
FORM f009_validate_kunnr .
DATA: l_kunnr TYPE kunnr.
CLEAR: w_vkorg, w_vtweg,w_spart.
SELECT SINGLE kunnr FROM knvv
INTO l_kunnr
WHERE kunnr = pr_kunnr
AND vkorg = pr_vkorg
AND vtweg = pr_vtweg
AND spart = pr_spart.
IF sy-subrc <> 0.
MESSAGE e000(zmsd) WITH text-010 pr_kunnr text-011 pr_vkorg .
ENDIF.
ENDFORM. " F010_validate_kunnr
*& Form f010_validate_werks
text
FORM f010_validate_werks .
CLEAR:w_werks.
SELECT SINGLE werks
INTO w_werks FROM t001w
WHERE werks EQ pr_werks.
IF sy-subrc <> 0.
MESSAGE e088(zmsd).
ENDIF.
ENDFORM. " f010_validate_werks
*& Form F011_validate_lgort
text
FORM f011_validate_lgort .
CLEAR:w_werks .
SELECT SINGLE werks FROM t001l
INTO w_werks
WHERE werks = pr_werks
AND lgort = pr_lgort.
IF sy-subrc <> 0.
MESSAGE e000(zmsd) WITH text-007 pr_lgort text-008 pr_werks .
ENDIF.
ENDFORM. " F011_validate_lgort
*& Form f003_get_data
text
FORM f003_get_data .
CLEAR wa_main.
REFRESH it_main.
LOOP AT it_upload INTO wa_upload.
CLEAR : wa_main.
MOVE: wa_upload-matnr TO wa_main-bismt,
wa_upload-quantity TO wa_main-kwmeng,
wa_upload-value TO wa_main-kwert,
pr_vkorg TO wa_main-vkorg,
pr_vtweg TO wa_main-vtweg,
pr_spart TO wa_main-spart,
pr_kunnr TO wa_main-kunnr,
pr_werks TO wa_main-werks,
pr_lgort TO wa_main-lgort.
APPEND wa_main TO it_main.
ENDLOOP.
ENDFORM. " f003_get_data
*& Form f004_process
text
FORM f004_process .
CLEAR w_check.
LOOP AT it_main INTO wa_main.
IF wa_main-matnr = ''.
WRITE:/ text-006,
wa_main-bismt.
w_check = 1.
ENDIF.
IF wa_main-kwmeng = 0.
WRITE:/ text-005,
wa_main-bismt.
w_check = 1.
ENDIF.
IF pr_auart <> 'ZM01'.
IF wa_main-kwert IS INITIAL.
WRITE:/ text-004,
wa_main-bismt.
w_check = 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " f004_process
*& Form f005_posting
text
FORM f005_posting .
CLEAR: w_itemno,
w_cond.
w_itemno = 10.
w_cond = 1.
IF w_check = '' OR w_check = 1.
wa_bapisdhd1-doc_type = pr_auart.
wa_bapisdhd1-ord_reason = pr_augru.
LOOP AT it_main INTO wa_main.
IF w_cond = 1.
CLEAR: it_bapiret2,
it_bapisditm,
it_bapiparnr,
it_bapischdl,
it_bapicond.
REFRESH:it_bapiret2,
it_bapisditm,
it_bapiparnr,
it_bapischdl,
it_bapicond.
MOVE: wa_main-vkorg TO wa_bapisdhd1-sales_org,
wa_main-vtweg TO wa_bapisdhd1-distr_chan,
wa_main-spart TO wa_bapisdhd1-division.
wa_bapisdhd1-wbs_eleM = 'Y561.1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = pr_kunnr
IMPORTING
OUTPUT = pr_kunnr.
wa_bapisdhd1-PURCH_NO_S = pr_kunnr.
wa_bapisdhd1-PURCH_NO_C = pr_kunnr.
ENDIF.
MOVE: w_itemno TO wa_bapisditm-itm_number,
wa_main-matnr TO wa_bapisditm-material,
wa_main-BISMT TO wa_bapisditm-material,
wa_main-werks TO wa_bapisditm-plant,
wa_main-lgort TO wa_bapisditm-store_loc.
wa_bapisditm-target_qty = '10'.
wa_bapisditm-PURCH_NO_S = pr_kunnr.
wa_bapisditm-PURCH_NO_C = pr_kunnr.
APPEND wa_bapisditm TO it_bapisditm.
IF w_cond = 1.
wa_bapiparnr-partn_numb = pr_kunnr.
wa_bapiparnr-itm_number = 10.
wa_bapiparnr-partn_role = 'SP'.
APPEND wa_bapiparnr TO it_bapiparnr.
wa_bapiparnr-partn_role = 'AG'.
APPEND wa_bapiparnr TO it_bapiparnr.
CLEAR wa_bapiparnr-partn_role.
wa_bapiparnr-partn_numb = pr_kunnr.
wa_bapiparnr-partn_role = 'RE'.
APPEND wa_bapiparnr TO it_bapiparnr.
CLEAR wa_bapiparnr-partn_role.
wa_bapiparnr-partn_numb = pr_kunnr.
wa_bapiparnr-partn_role = 'RG'.
APPEND wa_bapiparnr TO it_bapiparnr.
CLEAR wa_bapiparnr-partn_role.
wa_bapiparnr-partn_numb = pr_kunnr.
wa_bapiparnr-partn_role = 'WE'.
APPEND wa_bapiparnr TO it_bapiparnr.
ENDIF.
wa_bapischdl-itm_number = w_itemno.
wa_bapischdl-req_qty = wa_main-kwmeng.
wa_bapischdl-PURCH_NO_S = pr_kunnr.
APPEND wa_bapischdl TO it_bapischdl.
wa_bapicond-itm_number = w_itemno.
wa_bapicond-cond_type = 'ZECL'.
IF ( wa_bapisdhd1-doc_type = 'ZPMU' ) OR ( wa_bapisdhd1-doc_type = 'ZPMM' ).
wa_bapicond-cond_type = 'ZVAL'.
ELSE.
wa_bapicond-cond_type = 'ZMRP'. "+PK12122006
ENDIF.
wa_bapicond-cond_value = wa_main-kwert.
APPEND wa_bapicond TO it_bapicond.
w_itemno = w_itemno + 10.
w_cond = w_cond + 1.
ENDLOOP.
data : SALESDOCUMENTIN like BAPIVBELN-VBELN.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = wa_bapisdhd1
IMPORTING
salesdocument = SALESDOCUMENTIN
TABLES
return = it_bapiret2
order_items_in = it_bapisditm
order_partners = it_bapiparnr
order_schedules_in = it_bapischdl
order_conditions_in = it_bapicond.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = c_ch.
ENDIF.
LOOP AT it_bapiret2 INTO wa_bapiret2.
DATA : w_err(100) TYPE c,
w_matnr TYPE matnr.
IF wa_bapiret2-type = 'E' AND wa_bapiret2-id = 'V1' AND wa_bapiret2-number = 392.
UNPACK wa_bapiret2-message_v1 TO w_matnr.
READ TABLE it_matnr INTO wa_matnr WITH KEY matnr = w_matnr.
IF sy-subrc EQ 0.
CONCATENATE text-013 wa_matnr-bismt INTO w_err SEPARATED BY space.
MESSAGE w_err TYPE 'S'.
ENDIF.
ENDIF.
IF WA_BAPIRET2-TYPE = 'S'. " Comment
WRITE: 40 TEXT-009, WA_BAPIRET2-MESSAGE_V2+0(10).
ENDIF.
ENDLOOP.
ENDFORM. " f005_posting
I have given all the necessary parameters. it is telling that error is in parameter
sales_header_in.
I have checked it.
i have assigned purch_no_s and purch_no_c of the structure BAPISDHD1(ORDER_HEADER_IN)
in the bapi with customer number.
and also i have assigned the partnumber of the structure BAPIPARNR ORDER_PARTNERS
in the bapi with customer number.
but still , it is diplaying the error message, please enter the sold to or ship to party number.
how to resolve this error.
this is urgent requirement.
points will be awarded.
thanking u in advance,
a.srinivas.Hi,
Did u have a look at the standard programs which make use of BAPI_SALESORDER_CREATEFROMDAT1
Heres a list...
LWSSOU08
MV45WF0S
MWWMJF21_BAPI_SALESORDER_CREAT
RBUS2032
Regards,
Tanveer.
<b>Please mark helpful answers</b> -
Issue in creating sales order using BAPI's...?
Hi Guru's,
i had generated the sales order using the BAPI..but could please guide me how to declare the data declaratin same fields as globally and how to move internal table and how to append ....
thanks in advance...
REPORT z_bapi_salesorder_create.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
call FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln TYPE vbak-vbeln,
gs_order_header_in TYPE bapisdhd1,
gs_order_header_inx TYPE bapisdhd1x,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gwa_itab1 TYPE bapisditm,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gwa_itab2 TYPE bapisditmx,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gwa_itab3 TYPE bapiparnr,
gt_return TYPE STANDARD TABLE OF bapiret2,
gwa_itab4 TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = gs_order_header_in
ORDER_HEADER_INX = gs_order_header_inx
IMPORTING
SALESDOCUMENT = gs_vbeln
tables
RETURN = gt_return
ORDER_ITEMS_IN = gt_order_items_in
ORDER_ITEMS_INX = gt_order_items_inx
order_partners = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF. -
Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI
I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra -
Problem while creating sales order using BAPI
Hi all,
i am creating a sales order from the purchase order data.
when my client will send a PO in EDI format, my 3rd party edi tool will convert that edi formatted PO to text format. then i will upload that text formatted PO to my program then i will create a SO from those uploaded PO data using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
but,no sales order is being created.& also i am not getting any return message.by debugging also, i am not getting the error.plz suggest where i am doing mistake.below is the coding.
DATA:
gfilename LIKE rlgrap-filename.
*--Internal tables
DATA: BEGIN OF i_item OCCURS 50. "Create Material Document Item
INCLUDE STRUCTURE BAPISDITM .
DATA: END OF i_item .
DATA: BEGIN OF i_partner OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPIPARNR.
DATA: END OF i_partner.
DATA: BEGIN OF i_schedule OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPISCHDL .
DATA: END OF i_schedule.
DATA: BEGIN OF i_cond OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPICOND .
DATA: END OF i_cond.
DATA: BEGIN OF i_part OCCURS 0, " Internal table for split data
part(20),
END OF i_part.
DATA: BEGIN OF i_return OCCURS 20. "Return parameter
INCLUDE STRUCTURE bapiret2.
DATA: END OF i_return.
*-- Work areas
DATA: BEGIN OF wa_header . "sales Document Header Data
INCLUDE STRUCTURE BAPISDHD1.
DATA: END OF wa_header .
*DATA: BEGIN OF wa_return . "Output Structure
INCLUDE STRUCTURE BAPIRET2.
*DATA: END OF wa_return .
DATA: begin of sorder.
INCLUDE STRUCTURE BAPIVBELN.
DATA: end of sorder.
data:begin of t_upload,
ebeln(10), "PO no(seagate)
aedat like sy-datum , "PO date
bsart(4) , "PO type
vdatu like sy-datum , "requested delivery date
kunnr(10) , "customer no-sold-to-party
kunak like vbak-kunnr, "bill-to-party
name1_s(20), "name1 of sold-to-party
name2_s(15), "name2 of sold-to-party
land1_s(3), "country
ort01_s(10), "city
regio_s(3), "region(state/province)
pstlz_s(10), "postal code
adrnr_s(10), "address
bstkd_e(10), "end customer purchase order
posex(6), "end customer PO line no(item no)
kdmat(18), "end customer material no(part no)
kunag(10), "ship-to-party
name1_c(20), "name1 of ship-to-party
name2_c(15), "name2 of ship-to-party
land1_c(3), "country
ort01_c(10), "city
regio_c(3), "region(state/province)
pstlz_c(10), "postal code
adrnr_c(10), "address
posnr(6), "item no(seagate PO line no)
pstyv(4), "item category
matnr(18), "material no(seagate 9 digit part no)
zmeng(13), "Target quantity in sales unit
vrkme like vbap-vrkme, "sales unit
meins(3), "UOM
posnr_tot like vbap-posnr,"Total no. of line items
werks(4), "plant
vstel like vbap-vstel, "shipping point
empst(10), "receiving point
shtyp(4), "shipment type
route(6), "route
vsbed(2), "shipping conds
rkfkf like vbap-rkfkf, "method of billing for co/ppc orders
zterm(4), "terms of payment key
inco1(3), "F.O.B inco term1
inco2(3), "F.O.B inco term2
end of t_upload.
Data: wa_upload like t_upload,
i_upload like standard table of t_upload.
Data:v_kunnr like kna1-kunnr,
v_posnr like vbap-posnr,
v_matnr like vbap-matnr,
v_zmeng like vbap-zmeng,
v_kunag like kna1-kunnr.
*---Constants
CONSTANTS: c_comma TYPE c VALUE ',', " For splitting data at commas
c_01(2) TYPE c VALUE '01', " For movement code in Bapi
c_b TYPE c VALUE 'B', " For mvt. Indicator in Bapi
c_creat(5) TYPE c VALUE 'CREAT', " For button text
c_clear(5) TYPE c VALUE 'CLEAR', " For clear button
c_mvmt(4) TYPE c VALUE 'MVMT',
c_ok(2) TYPE c VALUE 'OK',
c_error(5) TYPE c VALUE 'Error'.
*--SELECTION SCREEN DESIGN--
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS:
p_auart LIKE vbak-auart, " order type
p_vkorg LIKE vbak-vkorg, " sales org
p_vtweg LIKE vbak-vtweg, " dist channel
p_spart LIKE vbak-spart, " division
p_vkgrp LIKE vbak-vkgrp, " sales group
p_vkbur LIKE vbak-vkbur, "sales office
p_file(256) default 'c:/saleorder.txt'. "File name
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN PUSHBUTTON 15(10) v_create USER-COMMAND creat.
SELECTION-SCREEN PUSHBUTTON 40(10) v_clear USER-COMMAND clear.
INITIALIZATION -
INITIALIZATION.
v_create = c_creat .
v_clear = c_clear.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selectfile USING p_file.
*--AT SELECTION_SCREEN--
AT SELECTION-SCREEN .
IF sy-ucomm = c_clear.
PERFORM f_clear.
ELSE.
IF sy-ucomm <> c_mvmt.
**--- Validating the input data.
PERFORM f_check_inputs.
ELSEif sy-ucomm = c_creat.
*--- Validating the input data.
PERFORM f_check_inputs.
*-- Uploading the PO data.
PERFORM f_PO_upload.
*---checking the PO data
PERFORM f_check_upload_data.
*---create sales order from PO data
PERFORM f_Sales_order_create.
ENDIF.
FORM f_PO_upload.
gfilename = p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = gfilename
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE i398(00) WITH '(WS_UPLOAD)'
' Errors occured with exception '
sy-subrc.
ENDIF.
ENDFORM. " f_PO_upload
*& Form selectfile
text
-->P_P_FILE text
FORM selectfile CHANGING value(filename) TYPE c.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = gfilename
def_path = 'C:\'
mask = ',*.txt.'
mode = 'O'
title = 'Select File Name'
IMPORTING
filename = filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " selectfile
FORM f_Sales_order_create.
PERFORM f_fill_header.
PERFORM f_fill_partner.
PERFORM f_fill_item.
PERFORM f_call_BAPI.
ENDFORM. " f_Sales_order_create
*& Form f_fill_header
text
--> p1 text
<-- p2 text
FORM f_fill_header.
move p_auart to wa_header-doc_type.
move p_vkorg to wa_header-sales_org.
move p_vtweg to wa_header-distr_chan.
move p_spart to wa_header-division.
move p_vkgrp to wa_header-sales_grp.
move p_vkbur to wa_header-sales_off.
Read table i_upload into wa_upload index 1.
move wa_upload-ebeln to wa_header-purch_no_c.
move wa_upload-aedat to wa_header-purch_date.
move wa_upload-bsart to wa_header-po_method.
move wa_upload-vdatu to wa_header-req_date_h.
move wa_upload-bstkd_e to wa_header-purch_no_s.
*move wa_upload-route to wa_header-route.
move wa_upload-vsbed to wa_header-ship_cond.
move wa_upload-empst to wa_header-rec_point.
move wa_upload-shtyp to wa_header-ship_type.
move wa_upload-zterm to wa_header-pmnttrms.
move wa_upload-inco1 to wa_header-incoterms1.
move wa_upload-inco2 to wa_header-incoterms2.
ENDFORM. " f_fill_header
*& Form f_fill_partner
text
--> p1 text
<-- p2 text
FORM f_fill_partner.
if not wa_upload-kunnr is initial.
select single kunnr from kna1 into v_kunnr
where kunnr = wa_upload-kunnr.
if sy-subrc <> 0.
Message E014 with 'customer does not exist'.
else.
move 'AG' to i_partner-partn_role.
move wa_upload-kunnr to i_partner-partn_numb.
move wa_upload-land1_s to i_partner-country.
move wa_upload-name1_s to i_partner-name.
move wa_upload-name2_s to i_partner-name_2.
move wa_upload-ort01_s to i_partner-city.
move wa_upload-regio_s to i_partner-region.
move wa_upload-pstlz_s to i_partner-postl_code.
move wa_upload-adrnr_s to i_partner-address.
append i_partner.
endif.
endif.
if not wa_upload-kunag is initial.
select single kunnr from kna1 into v_kunag
where kunnr = wa_upload-kunag.
if sy-subrc <> 0.
Message E015 with 'end customer does not exist'.
else.
move 'WE' to i_partner-partn_role.
move wa_upload-kunag to i_partner-partn_numb.
move wa_upload-land1_c to i_partner-country.
move wa_upload-name1_c to i_partner-name.
move wa_upload-name2_c to i_partner-name_2.
move wa_upload-ort01_c to i_partner-city.
move wa_upload-regio_c to i_partner-region.
move wa_upload-pstlz_c to i_partner-postl_code.
move wa_upload-adrnr_c to i_partner-address.
append i_partner.
endif.
endif.
ENDFORM. " f_fill_partner
*& Form f_fill_item
text
--> p1 text
<-- p2 text
FORM f_fill_item.
loop at i_upload into wa_upload.
if not wa_upload-matnr is initial.
select single maramatnr msegmenge into (v_matnr, v_zmeng) from
mara inner join mseg on maramatnr = msegmatnr
where mara~matnr = wa_upload-matnr.
if sy-subrc <> 0.
Message E016 with 'material no does not exist'.
elseif v_zmeng LT wa_upload-zmeng.
Message E017 with 'order quantity is greater than the quantity present'.
endif.
endif.
move wa_upload-posnr to i_item-itm_number.
move wa_upload-pstyv to i_item-item_categ.
move wa_upload-matnr to i_item-material.
move wa_upload-zmeng to i_item-target_qty.
move wa_upload-meins to i_item-target_qu.
move wa_upload-werks to i_item-plant.
*move wa_upload-meins to wa_vbap-meins.
*move wa_upload-posnr_tot to wa_vbap-posnr_tot.
move wa_upload-posex to i_item-po_itm_no.
move wa_upload-kdmat to i_item-cust_mat22.
move wa_upload-inco1 to i_item-incoterms1.
move wa_upload-inco2 to i_item-incoterms2.
move wa_upload-zterm to i_item-pmnttrms.
move wa_upload-empst to i_item-rec_point.
move wa_upload-shtyp to i_item-ship_type.
move wa_upload-route to i_item-route.
append i_item.
PERFORM f_fill_schedule_line.
PERFORM f_fill_conditions.
ENDLOOP.
ENDFORM. " f_fill_item
*& Form f_fill_schedule_line
text
--> p1 text
<-- p2 text
FORM f_fill_schedule_line.
move wa_upload-matnr to i_schedule-itm_number.
move sy-datum to i_schedule-req_date.
move wa_upload-zmeng to i_schedule-req_qty.
append i_schedule.
ENDFORM. " f_fill_schedule_line
*& Form f_fill_conditions
text
--> p1 text
<-- p2 text
FORM f_fill_conditions.
move wa_upload-matnr to i_cond-itm_number.
move sy-datum to i_cond-conpricdat.
append i_cond.
ENDFORM. " f_fill_conditions
*& Form f_clear
text
--> p1 text
<-- p2 text
FORM f_clear.
clear:p_auart,
p_vkorg,
p_vtweg,
p_spart,
p_vkgrp,
p_vkbur.
ENDFORM. " f_clear
*& Form f_call_BAPI
text
--> p1 text
<-- p2 text
FORM f_call_BAPI.
clear:i_item,i_partner,i_schedule.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = wa_header
ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = sorder
TABLES
RETURN =
ORDER_ITEMS_IN = i_item
ORDER_ITEMS_INX =
ORDER_PARTNERS = i_partner
ORDER_SCHEDULES_IN = i_schedule
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN = i_cond.
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
if not ( sorder-vbeln is initial ).
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
write: /'Order number:', sorder.
else.
loop at i_return.
write: / i_return-id, i_return-number, i_return-message(80).
endloop.
*write: /'Error'.
endif.
*loop at i_return.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
ENDFORM. " f_call_BAPIHI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar -
How to update sales orders using B1WS in SAP 8.8 PL18
Hello all.
We are having a problem updating sales orders using Sap Business One Web Service ( B1WS ).
We are running SBO 8.8 PL18, MS-SQL 2008, and all is fine when using the SBO client.
But when it comes to updating sales orders through B1WS we just cannot get it to work.
We can add new orders easily without problems. Updating orders always gives this error:
\[ORDR.PayDuMonth\]\[line: 0\] , 'Field cannot be updated (ODBC -1029)'
We have checked and verified multiple times that our setup is correct.
Also the WDSL files are verified.
We can update orders just fine using the sboclient.
And using B1WS we can basically do everything, besides updating.
We have also tried this on different company db's, so we are quite sure this is not
something related to some general setting we missed, but who knows?
We have tried different ways to "assemble" the order before updating, but it always
ends with the above error.
Here is an example of one of the tests, where we load an order by docentry,
increment the quantity of all open lines by '1', and then try to update it.
protected void Page_Load(object sender, EventArgs e)
// First we login
string sessionId = "";
LoginService.LoginService l_login = new LoginService.LoginService();
LoginService.LoginDatabaseType l_dbtype = LoginService.LoginDatabaseType.dst_MSSQL2008;
LoginService.LoginLanguage _lang = LoginService.LoginLanguage.ln_English;
string _server = "SAP-8_8PL18";
string _licserver = "SAP-8_8PL18:30000";
string _db = "my_test_company";
string _user = "manager";
string _pass = "********";
try
sessionId = l_login.Login(_server, _db, l_dbtype, true, _user, _pass,
_lang, true, _licserver);
catch (Exception ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
if (sessionId == "")
Response.Clear();
Response.Write("No sessionId");
Response.End();
// We are logged in and have a sessionId
// Now load a valid open order by docentry
try
OrdersServiceRef.OrdersService orderService = new OrdersServiceRef.OrdersService();
orderService.MsgHeaderValue = new OrdersServiceRef.MsgHeader();
orderService.MsgHeaderValue.SessionID = sessionId;
orderService.MsgHeaderValue.ServiceName = OrdersServiceRef.MsgHeaderServiceName.OrdersService;
orderService.MsgHeaderValue.ServiceNameSpecified = true;
OrdersServiceRef.DocumentParams docParams = new OrdersServiceRef.DocumentParams();
docParams.DocEntry = 31; // Docentry of a known open order
docParams.DocEntrySpecified = true;
OrdersServiceRef.Document order = orderService.GetByParams(docParams);
OrdersServiceRef.DocumentDocumentLine line = null;
for (int i = 0; i < order.DocumentLines.Length; i++)
line = order.DocumentLines<i>;
if (line.LineStatus == OrdersServiceRef.DocumentDocumentLineLineStatus.bost_Open)
line.Quantity += 1;
orderService.Update(order);
catch (System.Web.Services.Protocols.SoapException ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
catch (Exception ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
Response.Clear();
Response.Write("All OK");
Response.End();
I hope that someone has an idea as to why this happens.
The customer often changes quantity or adds lines on their orders,
and the only way to solve it so far has been to make a new order and
close the old one.
Thanks in advance
J. ThomsenHi,
Welcome you post on the forum.
Have you checked if you only update a specific line instead of a loop?
Thanks,
Gordon -
How to ChangePlantfor each item of Sales order using User Exit SAVE_DOCUMEN
Hi All,
I have to change plant for Each line item of sales order using (MV45AFZZ) (USEREXIT_SAVE_DOCUMENT) based on first Schedule line.
if Confirmed Quantity is Less than Ordered Quantity.
based on first Schedule line.
it has to select other Plant and need to populate it in line item of sales order.Please see the below code and let me knoe if any changes required... Thanks in Advance.
data : wa_vbep like xvbep,
Lv_matnr type mara-matnr,
lv_werks type marc-werks.
DATA: it_vbap TYPE STANDARD TABLE OF vbap,
wa_vbap TYPE vbap.
field-symbols: <wa_vbap> type VBAPVB.
clear wa_vbap.
*loop at xvbap into wa_vbap.
loop at xvbap assigning <wa_vbap>.
read table xvbep into wa_vbep with key posnr = <wa_vbap>-posnr.
if wa_vbep-ETENR = '0001'.
if sy-subrc = 0.
IF wa_VBEP-BMENG LT wa_VBEP-WMENG.
SELECT SINGLE DWERK
INTO lv_werks
FROM MVKE WHERE matnr = <wa_VBAP>-matnr
and DWERK ne <wa_VBAP>-werks.
if not Lv_werks is initial.
if lv_werks EQ 1033.
move '1002' to <wa_vbap>-werks.
if sy-subrc eq 0.
xvbap-werks = <wa_vbap>-werks.
modify xvbap from <wa_vbap> .
endif.
elseif lv_werks EQ 1003.
move '1003' to <wa_vbap>-werks.
elseif lv_werks EQ 1010.
move '1010' to <wa_vbap>-werks.
endif.
endif.
endif.
endif.
endif.
endloop.
endif.
Regards,
Sudhakar Reddy.AYou have to use the form routine "USEREXIT_SAVE_DOCUMENT_PREPARE"
regards
Vinod
Maybe you are looking for
-
So I'm trying to use the text tool to make words but nothing is showing up. The text is on the top layer and set to a different color from the background and the opacity is set to 100% so it's not a simple problem like that.nI'm trying to type using
-
Hello Gurus, Can anybody update me about the new featues of WAD in BI 7.0 ? In the sense I would require the difference between 3.5 and 7.0 WAD. Points shall be assigned for sure. Thanks in advance, Kind Regards, Sunitha
-
Problem in editing JTable fields.....
Hi there!! I have got 2 classes in my package,one contains a public static JTable while the other has got some variables whose values I want the JTable's fields to populate with.Now the problem I have is that I can't populate the JTable's fields afte
-
How can i map this lot out?
I have this code below How can get it to print out so that it will print out all the key values that are equal to cust, Then print out all the key values that are equal to details, then print out all the key values that are equal to item. Thank you l
-
Hi all, I've created a Flash page in FL CS3 with ActionScript 3 that loads external content based on button clicks. All the external referenced files are present and the movie plays perfectly when tested in Flash player. However, when I insert this