Clear win passwprd on hp compaq 6000 pro

Clear window password

Hi,
If you have forgotten your password and cannot therefore boot into Windows, try the method described on the link below.
http://pogostick.net/~pnh/ntpasswd/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Memory upgrade for HP Compaq 6000 Pro SFF

Hi all!.
I've got a problem for upgrading RAM memory on my HP Compaq 6000 Pro SFF. In fact, upgrading is from 2GB to 4GB.
I think all technical details are the same ones. So, there're two memory modules on my PC (ELPIDA 1GB 1Rx8 64 bit DDR3 1333 PC3-10600 CL9 240 DIMM).
Now, I'd like to install only a new 4GB memory module from Kinsgton (KVR13N9S8/4 - 4GB 1Rx8 512M x 64-Bit PC3-10600
CL9 240-Pin DIMM).
Finally, there's a 5 beeps cycle sound at PC power on. So, machine doesn't work. Would you mind to write down what's the problem?
Thanks very much.

Do you have a black memory slot and 3 white ones? Which slot are you putting the 4 gig DIMM into? Have you tried it with the 4 gig in the black slot and the 2 x 1 gig modules in the white slots?
Your Manual

No Audio from HP Compaq 6000 Pro Small Form Factor PC display port

Hi
I have a HP Compaq 6000 Pro Small Form Factor PC that has a display port. I bought a display port-HDMI adapter to use it on my LG plasma TV. The video is fine but i get no audio.
Please what do i need to do? does my display port support audio? The symbol on it has the DP++ sign which indicates it should support audio.
Please assist me.

Hi:
To the best of my knowledge, your PC does not support audio out of the display port.
Check your sound and playback menu in the contol panel, and see if you have 2 HD audio selection choices. If not, you won't be able to get sound out of the display port.
Paul

HP COMPAQ 6000

I have 24 HP Compaq 6000 machines. I created a image on one machine and uploaded the image to our zen server. I then made a feew changes on the machine and then remiaged the machine with the original image I made. Everything went great the machine re-imaged just fine back to its original state. So I setup the rest of the machines and began to image 2 of them the image was successful so it told me. When I rebooted the machine it come to the win xp initial screen with the progress bar and then about 15 seconds into the progress bar it locks and restsrt and repeat this process. Any Ideas

Originally Posted by Jasonh
when I have problems like that it usually comes from the wrong HAL or wrong
SATA drivers.
If you could get the stop error that would help point you in the right
direction (but they are not always that helpfull), are the bios and all the
bios settings the same. Is this a sysprep, mini setup or just a copy of the
orginal pc? What about safe mode?
J
It is just a copy of one machine to another. I downloaded a image software and did a disk to disk copy from this software and it worked perfect. To get these up and running I am using the software and copying the drives individually until I can figure out why zen wont do it. Safe mode loads but only for a few seconds and then reboots. the Thing that I dont understand is prior to getting all the machines I ordered just one to make sure I could image it. I turned it on went through the basic initial windows setup on the new hp's, installed office and then created a image of the machine. I then reimaged the machine with the image I created and it worked great. So I loaded the rest of my software I needed on the machine. created another image and then when the rest of the pc's came in I tried to reimage them and this started. I can take any of the pc's and image it with the orignal image I created (the one with only office) and they work it will boot up and all I have is the standard pc with office. As soon as I try to image it with the image that has all my software loaded it fails.
"gator17" <[email protected]> wrote in message
news:[email protected]..
>
> Does anyone no where to begin to trouble shoot this type of issue. I am
> lost.
>
>
> --
> gator17
> ------------------------------------------------------------------------
> gator17's Profile: NOVELL FORUMS - View Profile: gator17
> View this thread: HP COMPAQ 6000 - NOVELL FORUMS
>

Motherboard manual for a compaq 6005 pro.

I need a motherboard manual for a compaq 6005 pro. Having no luck in my search.
This question was solved.
View Solution.

Hi,
http://static.highspeedbackbone.net/pdf/HP%20Compaq%206005%20Pro%20Business%20PC%20Computer%20Mainte...
Maintenance &amp; Service Guide: HP Compaq 6005 Pro Business PC - Removal and Replacement Procedures Microtower (MT) Chassis
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c01869904
Maintenance &amp; Service Guide: HP Compaq 6005 Pro Business PC - Removal and Replacement Procedures Small Form Factor (SFF) Chassis
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01869966
Maintenance &amp; Service Guide: HP Compaq 6005 Pro Business PC - POST Error Messages
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01869903
Regards

I accidentally clear my iMessage conversations in my macbook pro, will it clear also my iPhone and iPad iMessage conversations?

I accidentally clear my iMessage conversations in my macbook pro(OS X 10.10.1), will it clear also my iPhone and iPad iMessage conversations as well?

No.
9:23 pm Wednesday; December 10, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations. What do? How fix? Thanks.

Quick Time 7.0 Pro (7.7.3) on Win 7 Home Prem 64-bit, Pro paid for, valid registration code, Open Image Sequence (and resulting time-lapse movies) has quit working after several successful operations. What do? How fix? Thanks.

This tip is ready for submission.
It REPLACES the prior version in the Time Machine forum, at: http://discussions.apple.com/thread.jspa?threadID=2057525
Additions/wording changes to items C3, C4, C5, D4
New topics C9, C10, C11, and E4

Lockup on context menu on Compaq 6200 Pro SFF

I have a Compaq 6200 Pro SFF that we have re-installed Windows XP on it. The only thing weird about the configuration is that it has 2 monitors. Now when I first heard of this problem I thought the user was crazy but when you right click in Windows Explorer in the Left hand monitor, which is usually the VGA monitor, the computer locks up. You have to power the machine off in order to use it again.
I have tried this one 4 other machines and it does the same thing, left hand monitor VGA, right click in Windows Explorer and the machine locks. We are using the VGA and the Display Port ports on the computer to give us dual displays. Generally we use a DP to DVI adapter to hook up the second monitor.
Some of the things that I have tried:
1) New graphics drivers from HP (still fails)
2) Disable the second monitor and go with single VGA(this works OK but we need the config to be dual monitor)
3) Re-image the machine (still fails)
4) Swapping the monitors around (still fails)
5) Disable the first monitor and go to the DP adapter (works fine, only fails in dual screen mode)
6) Disabled context menu items that were not Microsoft items, context menu was pretty much base OS (still failed)
Any help on this would be appreciated.

The Compaq 6200 Pro SFF is using:
Intel HD Graphics 2000
256 MB Video Ram
Intel Driver 6.14.10.5361
Previous version 6.14.10.5328
The Elitebook 2560P is using:
Intel HD Graphics 3000
1024 MB Video Ram
Intel Driver 6.14.10.5361
No previous version

I Have Compaq 6200 Pro Microtower Pc..THE SCREEN TURNS WHITE & FREEZES after 8 -Minutes of usage

I have an HP Compaq 6200 Pro Microtower PC.
I cant use in recent times, about two weeks now. The screen turns white and freezes after about 8-10 minutes of been in use. when this happens, the FAN spins at extraordinary fast speed and this will continue for as long as possible until i have to press and hold the power button to off it.
I have changed processor, powerpack, cooling fan, memory and hard disks but the problem persists.
This PC is an i5- 3.10ghz, 4gb ram, 320gb hdd, ...windows 7 professional 64 bits.
I need urgent help. Technical advice. What could be the course of this and what do i need to DO?

Start the PC in 'safe mode' and check in device manager for new graphics drivers, it sound like you drivers are either out of date or corrupted, the screen going white and computer responding is a symptom of this.
safe mode uses VGA drivers and these should not freeze giving you ample time to complete these steps.

HP Compaq 6005 Pro SFF Win 7

I purchased a refurbished 6005 Pro SFF with Windows 7. I discovered that the DVD drive which came with the computer can not write to disk. I have an idea to swap my old NEC ND-1100A disk drive from an older Windows XP machine to the 6005 pro SFF. Does anyone know if this will work?
Thank you

Already asked and answered.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After Win 8.1 upgrade, Acrobat 9 Pro suddenly won't run

I have Web Premium CS4, and Acrobat Pro v. 9.5.5. I bought a new Window 8.0 computer 90 days ago, installed the suite, activated, and everything ran fine. Yesterday, I upgraded to Win 8.1. Now, when I open Acrobat Pro, I get a pop-up message saying that it was installed as part of a suite, and to open another program in the suite first. When I click OK, Acrobat closes. I have tried opening nearly every other program in the suite (Bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will still not run, and there are no activation messages. I checked my Adobe account, and my version of Acrobat Pro 9 is still listed, with serial number.
I'm very disappointed, as I use Acrobat Pro quite a bit, and currently it will not stay open at all. Other than telephoning Adobe for help (no free support # listed), or using on-line chat (no link available), or e-mailing them (no address listed)...what can I do to "activate" it?
I've tried opening Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what appears to be an input box with activation stuff. It only appears for half-a-second, so I cannot do anything with it.

Bill, thanks for that info. I don't think I would ever expect to get any support from Adobe on these programs, since I stopped buying revisions after CS4. I was surprised that I was even able to successfully install the CS4 Web suite onto Win 8.0, and Win 8.1 probably adds another couple hundred million lines of redundant code from our friends in Bill Gates-Land.
However, my A-Pro9 problem did resolve unexpectedly! I tried opening all the suite's programs, one at a time, and then Acrobat, with no luck. Then I realized that the suite had installed both 64-bit and 32-bit versions of Photoshop (I use the 64-bit version) onto my new 64-bit computer. So, when I opened the *32-bit Photoshop* for a minute, closed it, and re-opened Acrobat 9, it went back to working normally. I'll take it!
--Eugene

How do I get firefox to display images clearly? I've got Windows 2000 Pro and Firefox 3.6.6. Internet Explorer shows images clearly, so I'm sure I have the correct graphics driver. Do I need a plugin or add-on of some sort? When I go to "updates", it

When I use Firefox the images and logos don't show up clearly/correctly. I'm using Windows 2000 Pro. and just installed Firefox 3.6.6. I'm sure I have the right graphics driver as I'm able to see the images and logos clearly in Internet Explorer. I only have the "default plugin 1.0.0.15" installed. I'm thinking that I'm missing a plugin or add-on of some sort, but I'm not sure which one(s). When I go to "updates" it says there were no updates available. When I go to "Add-ons" it gives a list of Add-ons but I'm not sure which would help my issue. Any help would be appreciated.:)
== This happened ==
Every time Firefox opened
== I decided to Download and Use Firefox on this computer. I was using IE before, and it works fine. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

The old win 7 x64 on a mac pro 1.1 issue - ISO file unreadable/corrupt

Hi all,
Trying to install win 7 x 64 on my mac pro 2,66 xeon 1.1. I knew beforehand there were issues, so I had prepared for them with the instructions given by flickguy here:
http://discussions.apple.com/thread.jspa?threadID=2207855
thing is, the resulting ISO file is unreadable in windows XP, is being seen as corrupt / unable to open by winrar , and the burnt DVD is shown as blank in snow leopard with all the latest updates.
I'm a bit clueless now as i have no idea at all what the problem is. if anyone has found or knows a solution to this, i'd be very grateful.
Thanks!

http://forums.macrumors.com/archive/index.php/t-467704.html
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
http://sergiomcfly.blogspot.com/2008/04/select-cd-rom-boot-type-when-installing. html
Working from Windows Vista, even in a VM, is one method.
Installing Windows on one drive partition, and from there installing 64bit to another drive partition.

Ready to install fresh win 8.1 on new Yoga Pro 2

So, I just got my yoga pro 2 Friday. Can't stand the extra stuff and 7 particians.
I've got a usb stick with a copy of win 8.1 on it. I can boot to it and get the windows installer started ( I stopped at the partiican table)
I got the drivers folder from the D: on the yoga backed up.
Got my win 8.1 pro product key written down.
Don't think I will need any of the lenovo apps.
Nothing else I need, right? I did actually make a system image of the fresh install on another external drive when I got it, so if i did need to go back, I can.
The windows installer will take care of all partiicans, correct? I'm new to EUFI boot. I can see that legacy mode is disabled in the bios now.
Thanks for any help. Looking forward to a clean install. Wish I could have gotten this from a MIcrosoft store instead so I don't have to deal with it.
Solved!
Go to Solution.

seems you're already ready.

Some Web sites are displayed differently in Firefox 4 in case they are installed different OS, in this case it is a win 7 - Ultimate and Windows XP Pro? how do I fix it?

"Sportska Kladionica" look different (in two rows) in Firefox 4 with OS Win 7, and in Firefox 4 with Win XP Pro (in one row).

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Clear win passwprd on hp compaq 6000 pro

Similar Messages

Maybe you are looking for