Clearcase and Solaris 10/zones

Hi All
Any one installed Rational Clearcase on a node with zones. If so
1. If each zone requires clearcase access, should clearcase be installed per zone
2. Or can it be installed in the global zone once and the zones can get access to it.
Your help will greatly enlighten and help me
Regards

The patch for ClearCase that adds Solaris 10 support specifically states that it does not support zones (yet). Maybe in ClearCase 7?

Similar Messages

Oracle 9i Database and Solaris 10 Zones

Can an existing oracle 9i database be moved into a new zone? The database resides on it's own filesystem. The server is runnign Solaris 10, and the zones are not set up yet, but Oracle is installed, and the 2 databases are up and running.
Basically there are 2 existing oracle 9i databases, and I want to setup 2 zones, where none other than the default global exist right now, and have each database in a zone.
Thanks in advance.

You need to do the following -
Configure loopback mount points from the global zone into the local zone through zonecfg (one for Oracle binary, other for Oracle data). I am assuming that you want to share the same Oracle binary location between all the zones. The Oracle database mounts must be separate & make sure that you put them in the respective zone's config only.
Create an oracle user with dba group in both the zones. It's best if the user IDs & group IDs across all the zones & global zone match.
Stop both the database instances in the global zone.
zlogin to a zone, su as oracle and startup the instances.
Hope that works!

Solaris Branded Zones, Unable to reboot/Halt

Hi People,
Hoping someone can help. Im running Solaris 10 on a Sun Workstation Ultra 45. I have two disks. One disk has the default install of solaris 10 all updated to the latest patches.The second disk is mounted as /zones and holds each of the zones on ZFS. I have then downloaded and installed successfully Solaris 8 and Solaris 9 and Solaris 10 zones. So I have 3 zones.
The problem I am facing is I can boot up all 3 zones fine and they work great, however when I halt or reboot either Solaris 8 or solaris 9, they never come back up. I try and zlogin to them and telnet and ssh and they are totally unresponsive and quite literally dont boot. I have tried to pkill -9 -z zonename ; umount /zonesfilesystem; zpool clear and even rebooted the Global zone. Still will not come up. The only way they will boot after being shutdown is if i shutdown the global zones and turn the server off and back on.
Solaris 10 Zone boots up and down fine with no isses. I have tried this on both UFS and ZFS thinking it might be a file lock issue. Still unable to reboot or halt a zone and bring it back up.
Any help please :)
Thanks in advance.

When they are unable to come back up, what does 'zoneadm list -cv' say? If the state of the zone is "down" or "shutting_down", you can probably benefit from the fix for:
7038404 outstanding zone references should not cause zone_destroy(2) to hang
This is available in 147440-05 (sparc) / 147441-05 (x86) or later.

PHP in Solaris 10 and Non-Global Zones: Problem of performance?

Hi friends
We are feeling a poor performance with applications developed with PHP in Solaris 10, with non-global and global zones, while Intel platform (Xeon and Pentium), performance is very good. Difference between both platforms is about 200% aprox, one second in Intel to 9, 12 or 20 seconds in Solaris depending of model.
Our tests were developed in:
1. SF T2000 server Solaris 10 global zone
2. SF T2000 server Solaris 10 non-global zone
3. SF280R server Solaris 10 non-global zone
4. V240 server with 1 GB memory, 1*US III-i 1.0 GHz and Solaris 9 (really this version for test and comparisons)
5. V240 server with 8GB memory, 2*US III-i 1.5Ghz and Solaris 9 (really this version for test and comparisons too)
Intel platforms were:
1. Intel Pentium 4 2GHz 2GB memory, Linux Fedora and PHP 4.4.4
2. Intel Xeon 2 core, 2.33GHz 2GB memory, Linux Fedora and PHP 4.4.3
Versions of products are:
1. Solaris 9 or Solaris 10
2. PHP 4.4.7 downloaded from http://www.php.net/downloads.php
3. Apache 2.0.59
4. MySQL 4.1.15-log
Our php compilation and installation were:
./configure --prefix=/usr/local/php-4.4.7 \
--with-pear \
--with-openssl=/usr/local/ssl \
--with-gettext \
--with-ldap=/usr/local \
--with-iconv \
--enable-ftp \
--with-dom \
--with-mime-magic \
--enable-mbstring \
--with-zlib \
--enable-track-vars \
--enable-sigchild \
--disable-ctype \
--disable-overload \
--disable-tokenizer \
--disable-posix \
--with-gd \
--with-apxs2=/usr/local/apache2.0.53/bin/apxs \
--with-mysql \
--with-pgsql \
--with-oci8=/oracle/product/9.2.0 \
--with-oracle=/oracle/product/9.2.0 \
--with-png-dir=/usr/local \
--with-zlib-dir=/usr/local \
--with-freetype-dir=/usr/local \
--with-jpeg-dir=/usr/local
make
make install
Questions:
Is there any problem of PHP with SunFire T2000 servers or 64-bits platforms?
Is there any flag of PHP would be use to compilarion PHP in 64-bits or multithread?
I wait for any comments or suggestions about our problem with PHP compilation and performance in Solaris 10. Thanks a lot.
Sergio.

I presume you compiled php on the Sun server, was this done using gcc or the Sun One C compiler.
If the latter then you can also use the flag: --enable-nonportable-atomics when you run configure

Fusion Middleware 11g Weblogic, forms and Reports in Solaris 11 zone

Hi,
Any one Installed Fusion Middleware 11g Weblogic, forms and Reports on Solaris 11 zone ??
So Pls Let me know Weblogic and Fusion Middleware 11g versions which are working
I try
Weblogic 10.3.3 Installed 64 Bit Went OK
Fusion Middleware 11g 11.1.1.2.0 Errors While Relink few items like frmbldr etc
Then Fusion Middleware 11g Patchset5 11.1.1.6 Still Same Errors Relink few items like frmbldr etc
Then Cconfig.sh failed at create domain
Regards

Hi Deepak,
Just config.sh or config.cmd file and try to change the JDK with in and try to configure new domain from there.
Regards,
Kal

Resource Management and Solaris Zones Developer Guide

Solaris Information Products ("Pubs") is creating a
developer guide for resource management and Solaris Zones.
The department is seeking input on content from application
developers and ISVs.
We plan to discuss the different categories of applications
that can take advantage of Solaris resource management
features, and provide implementation examples that discuss
the particular RM features that can be used.
Although running in a zone poses no differences to most
applications, we will describe any possible limitations and
offer appropriate workarounds. We will also provide
information needed by the ISV, such as determining
the appropriate system calls to use in a non-global zone.
We plan to use case studies to document the zones material.
We would like to know the sorts of topics that you would
like to see covered. We want to be sure that we address
your specific development concerns with regard to these
features.
Thank you for your comments and suggestions.

Hi there, i'm using solaris resource management in a
server with more thant 2thousand acounts.
Created profiles for users, defaul, staff, root and
services.Seeing the contents of your /etc/project file could be helpful.
But while using rctladm to enable syslog'ing, I set up
global flags of "deny" and "no-local-action" in almos
everything.The flags on the right hand side of the rctladm(1M) output are read-only:
they are telling you the characteristics of the resource control in question (what
operations the system will allow the resource control to take).
Now, many aplications don't work because they are
denied enough process.max-stack-size and
process.max-file-descriptor for them to work.
Applications such has prstat.If prstat(1) is failing due to the process.max-file-descriptor control value, that's
probably a bug. prstat(1) is more likely bumping into the limit to assess how many file
descriptors are available, and then carrying on--you're just seeing a log message since
prstat(1) tested the file descriptor limit, and you've enabled syslog for that control. Please
post the prstat(1) output, and we'll figure out if something's breaking.
I don't find a way to disable the global flags. You can't. I would disable the syslog action on the process.max-stack-size control first;
there is an outstanding bug on this control, in that it will report a false triggering event--
no actual effect to the process. (If you send me some mail, I will add you as a call record
on the bug.)
Can anyone tell me:
how to disable global flags?
how to disable and enable solaris resource management
all together?You could raise all of the control values, but the resource control facility (like the resource
limit facility it superseded) is always active. Let's figure out if you're hitting the bug I mentioned,
and then figure out how to proceed.
- Stephen
Stephen Hahn, PhD Solaris Kernel Development, Sun Microsystems
[email protected]

Unclear on branded solaris 9 zones and ipfilter

I just managed to install my first solaris 9 zone on a solaris 10 system (v490). It has gone fairly well so far but I
am definitely "unclear on the concept" with respect to ipfilter and the zone. This is a shared ip zone.
On solaris 9 we use ipfilter 3.4.32.
I used a flar from one of these systems to install the zone. On boot, I see that our ipfboot file in /etc/rc2.d fails with
modload failures etc
You must be superuser to load a module
open device: No such file or directory
open device: No such file or directory
constructing minimal name resolution rules...
open device: No such file or directory
open device: No such file or directory
open device: No such file or directory
open device: No such file or directory
/etc/rc2.d/S65ipfboot: load of /etc/opt/ipf/ipf.conf into alternate set failed
Not switching config due to load error.
/dev/ipf: open: No such file or directory
This makes sense but as I said what do I do instead. I found this in the solaris container system admin manual
"Solaris IP Filter can be enabled in non-global zones by turning on loopback filtering as described in Chapter 26, Solaris IP Filter (Tasks), in System Administration Guide: IP Services. "
Yes, but that doesn't help me much since the IP Filter tasks simply tell me to do this in ipf.conf in the global zone.
set intercept_loopback true;
Isn't there more to it than this? A real example some place would be most helpful. And how can I make sure it is working?
Not a real ipf guru :-(

First thing to check is if your zone can access the global zone (try pinging). If this isn't the case you probably need to setup a routing entry allowing the non-global zone some access.
For example, say the global is 10.0.0.1 and the non-global 192.168.0.1 on eri0 you'd use something like:
route add 10.0.0.1 192.168.0.1 -iface
This tells your non-global zone that it can reach the global zone through the eri0 interface. Ofcourse you can also expand this to networks and such.
Another very important factor to keep in mind when dealing with internet is trying to access it from the non-global zone (as a test). Your ipnat.conf entry should be enough, my guess for to the reason for not routing the data is a non-static arp entry of your internet gateway. Now, this is a mere guess but if you have a default route in your routing table setup for Internet access (netstat -rn) make sure that the host to which the default route is pointing also has a static arp entry (man arp). If this is indeed the case you may also need to setup a routing entry as mentioned above to allow your zone access to this remote gateway.
After that things should work as usual. Hope this helps.

Solaris 8 Container in Solaris 10 Zone

Hi All,
one of our customers wants to run Solaris 8 with Oracle 8.1.7 in a BrandZ Zone. Does anybody have an idea about how stable Solaris 8 is in a Zone environment? Are there any known issues with Solaris 8 running in a Zone?
Since Solaris 8 is EndOfShipment, are there chances to get up-to-date Sun Hardware bundled with Solaris 8 apart of using Solaris 10 Zones?
Thanks in Advace,
Dog

i didnt however i wasnt hammering it. if the load was expected to be high i would have done the io layout diff (try and follow some of oracles ideas: SAME for one, if possible).
some depends on the load and the load from the other zones. you can use allocate resource limits to give more priority to more important zones or make sure you have enough resources to start. what type of load are you expecting?

Route add problem in solaris 10 zone

hi all
when i add route in one of my solaris 10 zone.. i get the following error. any workaround?
# route add xxx.xxx.255/24 10.xxx.xxx.1
add net xxx.xxx.255/24: gateway 10.xxx.xxx.1: insufficient privileges
thanks
peter

it means i can only add route in globle zone? but
global zone and sub-zones are using diff IP and
interface cards. so how?But they're children of the same kernel. There can only be one routing table (at the moment, anyway). So make your route adds from global and watch them appear in the netstat output of your non-global zones.
I agree that this is a confusing and poorly documented aspect of zones, however. I will admit to you that I barely understand it myself. However, there is a good answer to a question I had about this in comp.unix.solaris. Search that newsgroup for "Viewing non-global routes from global zone". A similar question fell on deaf ears here.
Also, I would recommend searching this forum for "zone routes" or "zone routing" as this is a frequently hit topic.
--gc1973

Problem with Java in solaris 10 zone

HI ,
i get this error message in my solaris 10 zone :
#./java version
Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_11/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space?
in global zone , java works fine !
uname -a
SunOS Server 5.10 Generic_141414-07 sun4u sparc SUNW,SPARC-Enterprise
best regards

I see mention of a similar problem, but only with early development releases of solaris10 branded zones running on Solaris 11 development bits. It seems as though this is not what you are running.
Since there are no swap caps nor brand emulation in place, the next thing I would suspect would be that you somehow have inconsistencies between key libraries (e.g. libc) and the kernel. This could happen if you have a full-root zone that has been force attached (zoneadm -z <zone> attach -F). In the past, I've seen products that do this under the covers (e.g. Veritas Cluster) so it may have happened without your knowledge. If it is a sparse root zone, you may want to run "zoneadm -z <zone> detach; zoneadm -z <zone> attach -u". Prior to doing so, take whatever precautions you would normally take when patching a system.
If you open a support call about this I bet the first advice you are going to get is to patch, as you seem to be 2+ years behind. Also, newer releases of Java 5 are available at http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html.

Solaris 10 zone config for JES

Setup a zone to install JES - Web servers, but when I launch the installer I get the following:
WARNING: Unsupported non-global zone
EntSysResources:zoneCheckPanel-Gui-LocalZoneSupported
Something in the zone setup is incorrect, but not sure what.
Anyone else out running JES in Solaris 10 zones?
Thanks!
Steve
[email protected]

From docs.sun.com -
The following Java ES and zones scenarios are supported in this release of Java ES:
* Installing Java ES in a non-global zone that uses the whole root file system (Using the default sparse root file system is not supported.)
* Installing Java ES in the global zone with no non-global zones
Zone can be 2 type - sparse root and whole root . sparse root model has following folders inherited - /lib, /platform, /sbin and /usr.
If a non-global zone doesn't have any inherit-pkg-dir resources, such a zone is said to be a whole root one
If you want to create a whole root zone but default shared file systems resources have been added by using inherit-pkg-dir, you must remove these default inherit-pkg-dir resources using zonecfg before you install the zone:
zonecfg:my-zone> remove inherit-pkg-dir dir=/lib
zonecfg:my-zone> remove inherit-pkg-dir dir=/platform
zonecfg:my-zone> remove inherit-pkg-dir dir=/sbin
zonecfg:my-zone> remove inherit-pkg-dir dir=/usr

Solaris 10 Zone for Solaris 11.1 creation with template fails.

Hi,
We are trying to use the Oracle VM Template for Oracle Solaris 10 Zone to create a solaris 10 zone on a solaris 11.1 GZ
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -v
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
Version: 1.0.9.12
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -p /rpool -a 10.83.128.35/24 -i net6 -z testzone
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright Â© 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
IMAGE: ./solaris-10u11-sparc
ZONE: testzone
ZONEPATH: /rpool/testzone
VNIC: vnicZBI83273795
IP ADDR: 10.83.128.35
NETMASK: 255.255.255.0
DEFROUTER: 10.83.128.1
TIMEZONE: Europe/Copenhagen
Checking disk-space for extraction
Ok
Extracting in /opt/scripts/bootimage.8Ham6r ...
100% [===============================>]
Checking data integrity
Ok
Checking platform compatibility
The host and the image do not have the same Solaris release:
host Solaris release: 5.11
image Solaris release: 5.10
Will create a Solaris 10 branded zone.
Checking disk-space for installation
Ok
Installing in /rpool/testzone ...
100% [===============================>]
Attaching testzone
Problem attaching testzone.
More details in /var/sadm/install/logs/solaris-10u11-sparc.log
Cleaning up and exiting.
Friday, May 10, 2013 03:18:01 PM CEST: cleaning up
root@exsolh0005:/opt/scripts#
root@exsolh0005:/opt/scripts# cat /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] ==== Starting: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
[Friday, May 10, 2013 03:17:56 PM CEST] Progress being logged to /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning datasets under rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:17:56 PM CEST] Log File: /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:57 PM CEST] Converting detached zone boot environment 'zbe'.
[Friday, May 10, 2013 03:17:57 PM CEST] Unmounting /rpool/testzone/root
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property zoned=on on rpool/testzone/rpool
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property canmount=noauto on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property mountpoint=legacy on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Mounting boot environment in rpool/testzone/rpool/ROOT/zbe-0 at /rpool/testzone/root (including child datasets)
cannot open 'ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1': invalid dataset name
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: refresh of ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1 failed
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: Error: rpool/testzone/rpool/ROOT/zbe-0: No such dataset.
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning datasets under rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:18:01 PM CEST] Result: Attach Failed.
[Friday, May 10, 2013 03:18:01 PM CEST] Exiting with exit code 254
[Friday, May 10, 2013 03:18:01 PM CEST] ==== Completed: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
Looks like a script bug..
Regards
Claus

Hello All,
I would love to know if someone has a solution to this as I am seeing a similar issue with a slightly different setup.
Solaris 8 and Netra 240. I get the same result with and without patches and finish scripts. After the jumpstart and the failed boot attempt from disk. I can boot from cd, copy the glm driver from the cd to disk, and then everything works as it should. Obviously this is not a solution but only a work around.
Is it something to do with the SCSI hardware architecture used in the *240s?
Edited by: Gareth_Mann on Oct 2, 2007 7:41 PM

Solaris 8 on a solaris 10 zone?

Can i install and configure solaris 8 OS on a solaris 10 zone? If yes , is it supported by sun in case we run into any issues and is it a straight forward way of doing it or is there any implication.complexities involved in configuring so?
Thanks in advance

Ah, attitudes, everyone has one...
As the link awhile back implied, there is something called the "Solaris 8 migration assistant" which is a Solaris 8 "branded" zone. It's still running the Solaris 10 kernel under the covers (so technically you're not running Solaris 8 in a zone) but it's impersonating a Solaris 8 system. I think there's a Solaris 9 version now too.
The last I heard, Sun was saying these can only be implemented with Sun Professional Services but I don't know where that stands. I don't believe it's free either.
Here's a link to the docs: [http://docs.sun.com/app/docs/doc/820-2914/|http://docs.sun.com/app/docs/doc/820-2914/]

Inetd service/program crashes with core dump in Solaris 8 zone/container

I have developed a service in C that is launched from inetd when something comes on a specific port.
When a connection is opened to the port a core dump is created in the same directory where the executable file is located.
If you run the same service program from the command line everything is working perfect.
This is running in a Solaris 8 zone/container on a Solaris 10 machine.
Everything is set correctly in /etc/inetd.conf and in /etc/services.
I have even stripped down the program to a hello world program that is just printing a string to the screen and it is still crashing with a core dump.
# ldd test_srv
/usr/lib/secure/s8_preload.so.1
libc.so.1 => /usr/lib/libc.so.1
libdl.so.1 => /usr/lib/libdl.so.1
/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1
The same service is running on a Linux machine and on a Solaris 10 machine without zones/containers without any problems.
Can you please help me figure out what am I missing. Is there something specific with zones/containers that should be set / configured?
Do I have to set some specific env. variables to work in a Solaris 8 zone/container environment or is it something very simple that I'm missing?

Could you please examine the truss log and advice what the problem is and how to fix it?
(some lines deleted)
bash-2.03# truss -f -p 18361 #### /usr/sbin/inetd -s -t &
18361: poll(0xFFBFF528, 53, -1)        (sleeping...)
18361: poll(0xFFBFF528, 53, -1)                        = 1
18361: accept(63, 0xFFBFF870, 0xFFBFF914, 1)           = 3
18361: sigprocmask(SIG_BLOCK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
18361: fork()                                          = 1921
1921:   fork()          (returning as child ...)        = 18361
1921:   sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
1921:   lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
18361: close(3)                                        = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFF600)          = 0
1921:   lwp_sigtimedwait(0xFFBFF668, 0xFFBFF528, 0x00000020) = 0
1921:   sigaction(SIGHUP, 0xFFBFF528, 0xFFBFF500)       = 0
18361: lwp_sigtimedwait(0xFFBFF568, 0xFFBFF5F0, 0x00000010) = 0
1921:   lwp_sigtimedwait(0xFFBFF508, 0xFFBFF458, 0x00000010) = 0
18361: sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921:   sigprocmask(SIG_SETMASK, 0xFFBFF5F0, 0xFFBFF600) = 0
1921:   lwp_sigtimedwait(0xFFBFF600, 0xFFBFF578, 0x00000010) = 0
1921:   lwp_sigtimedwait(0xFFBFF568, 0xFFBFF728, 0x00000010) = 0
1921:   fcntl(3, F_DUP2FD, 0x00000000)                  = 0
1921:   close(3)                                        = 0
1921:   fcntl(0, F_DUP2FD, 0x00000001)                  = 1
1921:   fcntl(0, F_DUP2FD, 0x00000002)                  = 2
1921:   open64("/etc/.name_service_door", O_RDONLY)     = 3
1921:   fcntl(3, F_SETFD, 0x00000001)                   = 0
1921:   door_info(3, 0xFF0C2748)                        = 0
1921:   door_call(3, 0xFFBFF278)                        = 0
1921:   close(67)                                       Err#9 EBADF
1921:   close(66)                                       Err#9 EBADF
1921:   close(65)                                       Err#9 EBADF
1921:   close(64)                                       Err#9 EBADF
1921:   close(63)                                       = 0
1921:   close(62)                                       = 0
1921:   close(12)                                       = 0
1921:   close(11)                                       = 0
1921:   close(10)                                       Err#9 EBADF
1921:   close(9)                                        Err#9 EBADF
1921:   close(8)                                        Err#9 EBADF
1921:   close(7)                                        Err#9 EBADF
1921:   close(6)                                        Err#9 EBADF
1921:   close(5)                                        Err#9 EBADF
1921:   close(4)                                        Err#9 EBADF
1921:   setrlimit(RLIMIT_NOFILE, 0xFFBFFD20)            = 0
1921:   xenix(398872, 0xFFBFF5E4, 0x00000040)           = 38
1921:   execve("/tmp/srv/t_srv", 0x0008B5FC, 0xFFBFFDA0) argc = 0
1921:   getuid()                                        = 0 [0]
1921:   resolvepath("/usr/lib/ld.so.1", "/usr/lib/ld.so.1", 1023) = 16
1921:   open("/var/ld/ld.config", O_RDONLY)             = 3
1921:   fstat(3, 0xFFBFF5E8)                            = 0
1921:   mmap(0x00000000, 148, PROT_READ, MAP_SHARED, 3, 0) = 0xFF3E0000
1921:   close(3)                                        = 0
1921:   stat("/usr/lib/libc.so.1", 0xFFBFF648)          = 0
1921:   resolvepath("/usr/lib/libc.so.1", "/usr/lib/libc.so.1", 1023) = 18
1921:   open("/usr/lib/libc.so.1", O_RDONLY)            = 3
1921:   mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xFF340000
1921:   mmap(0x00000000, 802816, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF200000
1921:   mmap(0xFF200000, 703520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF200000
1921:   mmap(0xFF2BC000, 24772, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 704512) = 0xFF2BC000
1921:   munmap(0xFF2AC000, 65536)                       = 0
1921:   memcntl(0xFF200000, 113528, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
1921:   close(3)                                        = 0
1921:   stat("/usr/lib/libdl.so.1", 0xFFBFF648)         = 0
1921:   resolvepath("/usr/lib/libdl.so.1", "/usr/lib/libdl.so.1", 1023) = 19
1921:   open("/usr/lib/libdl.so.1", O_RDONLY)           = 3
1921:   mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921:   mmap(0x00000000, 8192, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF330000
1921:   mmap(0xFF330000, 2638, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF330000
1921:   close(3)                                        = 0
1921:   stat("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", 0xFFBFF368) = 0
1921:   resolvepath("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", "/usr/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 41
1921:   open("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", O_RDONLY) = 3
1921:   mmap(0xFF340000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF340000
1921:   close(3)                                        = 0
1921:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF320000
1921:   dup(0)                                          = 3
1921:   llseek(0, 0, SEEK_CUR)                          Err#29 ESPIPE
1921:   close(0)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000000)                  = 0
1921:   close(3)                                        = 0
1921:   dup(1)                                          = 3
1921:   close(1)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000001)                  = 1
1921:   close(3)                                        = 0
1921:   dup(2)                                          = 3
1921:   close(2)                                        = 0
1921:   fcntl(3, F_DUP2FD, 0x00000002)                  = 2
1921:   close(3)                                        = 0
1921:   sys#177(0x00000080, 0xFFBFFB7C, 0xFF3F0518, 0x00000000, 0xFF3C2EF8, 0xFF2C0284) = 0x00000000 [0xFFBFFB7C]
1921:   sys#227(0x00000006, 0x00000000, 0x0001ADF0, 0xFF3F0518, 0xFF3C3C18, 0xFF3C2670) = 0x0000000C [0x00000000]
1921:   sys#227(0x00000002, 0x0000000C, 0x0000000E, 0xFFBFFCAE, 0x00000002, 0xFF3C2670) = 0x00000002 [0x00000000]
1921:       Incurred fault #6, FLTBOUNDS %pc = 0xFF232E2C
1921:         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921:       Received signal #11, SIGSEGV [default]
1921:         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
1921:           *** process killed ***
18361:      Received signal #18, SIGCLD, in poll() [caught]
18361:        siginfo: SIGCLD CLD_DUMPED pid=1921 status=0x000B
18361: poll(0xFFBFF528, 53, -1)                        Err#4 EINTR
18361: lwp_sigtimedwait(0xFFBFF218, 0xFFBFF140, 0x00000010) = 0
18361: lwp_sigtimedwait(0xFFBFF130, 0xFFBFF218, 0x00000010) = 0
18361: sigprocmask(0, 0x00000000, 0xFFBFEF28)          = 0
18361: poll(0xFFBFF528, 53, -1)        (sleeping...)Thank you in advance

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Clearcase and Solaris 10/zones

Similar Messages

Maybe you are looking for