Cleared item in R/3 shows as open in 0fiar_c03

Hi,
As i mentioned above...
Cleared items in R/3 shows as open in infocube 0fiar_c03... am i miising somethig?
Best regards
Juan

Hi Prasad,
You have the following ways to find out the reason:-
1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
This is standard SAP and most probably it has got to do with dates...
Regards,
SAPFICO

Similar Messages

  • Unable to clear the vendor open items becasuse it is not showing as open ln

    Hi,
    I ran APP in F110 and it the status was
    Pararmeteres have been entered.
    payment proposal has been created
    payment proposal has been edited.
    payment run has been carried out
    posting orders:1 generated and 1 created.
    I edited a wrong item,so I cancellled the payment run.
    But when I try to make payment for this item in vendor open item list it is showing as open item but in F-44 it is not coming as open items..
    How I will clear this Item?

    Hi Smruti Mohanty,
    First you have to delete the payment proposal in F110 what you created and deleted that one ,why because the item is stored in that proposal so we cant get that in F-44.
    You can Clear this issue through this way.
    now i am giving how the deletion of proposal steps in F110
    For that select Run date and give identification .next keep the cursor on the proposal and go to edit >Proposal>Delete ,same for parameters and payments also.
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Customer interest calculation on both open & cleared items

    Hi,
    I have created a Interest Calculator Indicator Z1 for that following configuration is made.
    1. Int Global Settings> Prepare Interest on Arrears Calculation-> Z1 under selection of items I have selected the open & cleared items.
    2. Int Global Settings> Prepare Item Interest Calculation-> Z1 under items selection I have selected the open items & all cleared items.
    But when I am running the FINT - Interest Calculation for customer selecting the Interest Indicator Z1 system is calculating only open items but in configuration I have selected both open and all cleared items. Still its considering only open items.
    Kindly provide the way to resolve this problem.
    Regards,
    Sandeep

    Thanks Chintan for immediate reply...
    I have check the solution given by you but not a single cleared document is not considering in FINT. I have one case like I have  posted one entry on 01.10.2010 & one same day I have reversed I need that entry should come in the same calculation. This will not effect in amount as it will get plus minus zero.
    Regards,
    Sandeep

  • Blocking the Cleared items From Fi Documents

    Hi ,
           I am creating fi report . In my report i do not want to display cleared items . Can you tell me based which table and which field we can remove clearing documents .
          In my customer balance report i want to remove the reversal entries of customer and cleared entires of customer . Can you tell me based on which field can i remove those documents .
    Regards
    Nandan.N

    hi Srihari,
    consider only open item tables , if u want to block cleared items.
    Bsik : open item table for vendor related.
    BSAK : Cleared item table for vendor.
    similarly
    bsid : open item table for customer
    bsad : cleared item table for customer.
      For developing customer ledger , i think u had to consider both open items and cleared items.
    Its just like bank statement ( transactions both cleared and open ) .
    If you developing outstanding report ,( balance repor) consider only bsid table.
    Regards,
    Hari priya
    Edited by: Hari  Priya on Apr 6, 2009 10:05 AM
    Edited by: Hari  Priya on Apr 6, 2009 10:07 AM

  • Reg: Certain Open Items are not showing in open item clearing F-44

    HI all,
    I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing.   i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
    with regards
    JK Rao

    Hi,
    Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator  you might not be giving here.
    reward pts if useful
    regds

  • Cleared items still shows as open items in transaction FBL3N

    Dear All,
    We have an issue with respect to cleared items still shows as open items in transaction FBL3N.
    Few documents has been posted and cleared, but still those line items still shows as open items.  We had this problem only for few line items. 
    For other line items this clearing process is working properly without any issue.
    Issue:
    1. Documnet has been posted on 15.08.2209 and the same document has been cleared on 12.03.2010, but this document still shows as open item only....
    Looking forward your  response / suggestions to resolve this issue.
    Thanks in advance
    Regards,
    Prasad

    Hi Prasad,
    You have the following ways to find out the reason:-
    1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
    2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
    This is standard SAP and most probably it has got to do with dates...
    Regards,
    SAPFICO

  • FI-GL :Balances shows in open item not in cleared item

    I have a small question
    I make provision in F-02Document .In I F-07 for payment with clearing . Here I used method is partial payment method.
    Actually at the last payment we have to done standard then only it will show in cleared item .But I forgot to use standard payment I used partial only .So the item still shows in open item only .Now I want to see this item in cleared item .How can see what steps I have to done for this
    Please advise me u2026
    Regards
    Rajesh

    Hi Expert,
    With respect to GL Account:
    T-Code: F-03 - to Clear the GL Account, if the payment made to the Provision GL Account through the T-Code: F-07.
    With respect to Customer:
    T-Code: F-32 - to Clear the Customer, If the Payment made through the T-Code: F-28 - Incoming Payments
    With respect to Vendor:
    T-Code: F-44 - to Clear the Vendor, If the payment made through the T-Code: F-53 - Outgoing Payments.
    Regards,
    GK
    SAP

  • Down Payment Clearing Document shows as open item

    Hi,
    I made an Down Payment Request (f-47) for $ 1000; made a Down Payment on that request (f110) for $1000; posted an invoice (fb60) with $ 1000; cleared the down payment and invoice (f-54) for $1000.
    Now in vendor open item s(fbl1n), both invoice (KR) and the clearing document (KA) are shown, while in cleared items, the down payment request (KA), down payment (KZ) and the clearing document (KA) are shown.
    My questions:
    1) Why the invoice and the clearing document are shown as open items?
    2) Why the clearing document is shown as both open item and cleared item?
    Thanks in advance
    Edited by: Ming Cao on Mar 1, 2010 7:21 PM
    Edited by: Ming Cao on Mar 1, 2010 7:23 PM
    Edited by: Ming Cao on Mar 1, 2010 7:24 PM
    Edited by: Ming Cao on Mar 1, 2010 11:27 PM

    Dear,
    Do not worry this is standard behavoiur by the system..see the below flow...
    1. Create down payment request - F-47. (Open)
    2. Create downpayment from the request F-48. (Down payment is open)
    3. Clear downpayment F-54. (Invoice and payment are open in normal items and Downpayment and requests are cleared. So downpayment came to normal items.
    You will need to clear these items manually...
    Regards,
    Chintan Joshi

  • Open and Cleared Items

    Hi all
    We are currently busy finalising our FI-CA BW Data Modeling exercise - and in process to complete Dataflow documentation.
    We will make use of the standard open and cleared item extractors with enhancements on different levels. Some background on the requirements:
    - We will have to extract document types, divisions, dates, clearing reasons, contract account, Business Partner etc.. information to meet the requirements.
    - We will have to keep history for at least 26 months to produce the required management reports (very high number of data), and 'partition' the cubes on date level for both Cleared and Open Items.
    - Most of the reports display 13 months worth of billing/ payment figures. I.e. the report for the end of October show billings vs. payments for October 2006, September, August, July, ... to October 2005.
    - The requirement is that the report figures will not change from one month to the next (i.e. if I run the report for end of October - all figures from October 2006 to Oct 2005 will remain the same when I run the report for end of November). I.e. if reversals, transfers, returns etc. occur - these will be picked up in later months.
    - For the above requirement, we are looking at extracting open (end of month) and cleared items (for the specific monthly interval) on a monthly basis, and appending the data in the cubes. We will then always base the June figure in the report on the June month extraction (LAUFD/ LAUFI fields) and we will pick up any movement in the next month/s - i.e. July.
    Has anyone had these types of requirements before - to report on billings vs. payments, and report on history as described above. We would appreciate it if you could share your report requirements, and also design documents, especially the DataFlow documentation that we can look at as input to our design.

    We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
    There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
    To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
    What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
    Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
    Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
    Hope that makes sense. Let me know if you want clarification.
    /smw

  • Cleared item swowing as a Open item

    Hi All,
    I posted a document in f-02 for bank charges the entry was bank charges a/c debit and bank a/c is credit. and i posted the same data into ff67. and for reconsilation i upload the same data into FEBA for bank statement. now this document is cleared.
    but the problem is when i see this document in FBL3N this document numbe showing in Open items but i cleared allready.
    Please give me the solution for this.

    Hi....
    Those are items we cannot delete first we have to reverse those items using the FB08 for open items ..other wise use T.code FBRA for clearing items
    once done the all activites after that you have dleted the statment number number useing program Goto SE38 and execute the following report: RFEBKA96.
    On application put 0001. Here you will find all the statements. Mark the ones you want to delete... and press Delete Statements. This will permanently delete the load from your system.
    HINT: to search the statement you want to delete (Short Key), query it using table FEBKO.
    After delete the Bank Statement, the following steps can be solved. Please try:
    T.Code: FEBP
    The following parameters to be entered:
    Statement date: The same statement date
    Statement number: The same statement number
    Select u201CPost immed.u201D Select
    Execute
    Note:
    Please note that statement date is very important and same to be entered to process all the data for posting.
    Finally check the statement file debit and credit balance it must be Zero
    Than try to post once again ..it will allows you post
    I hope it will helps you
    Regards
    vamsi

  • FBL3N-cleared item visible in both open item and cleared item.

    Hi
    We have posted a line item to Bank clearing account-open item.
                            XXXX a/c
                                 To bank clearing account
    Then we posted another entry of reconciliation
                         Bank clearing account
                               To main bank
    The we went to f-03 and cleared the bank clearing account.
    However i could still see both the entries in open item in fbl3n and also in cleared items.How this be possible when the accounts are cleared i could see it in open item too.Please suggest.

    Hi,
    One more reason for this is that you have posted ur bank reconsilation entry in the future date.
    See by default SAP will always derives current date to your FBL3N selection screen in the open item key date field, so when you pass ur recon entry at a future date, system will show this line items as open items as on current date.
    check the open items by removing date in the key date field in FBL3N selection screen
    Where as cleared item selection there will not be any date derivation by the system, so system considers all the documents irrespective of their posting dates.
    Please ask for further issues.
    Thanks,
    Srinu.

  • Few customer invoices are appearing in open as well as cleared items.

    when I am running FBL5N for a particular customer, few line items are coming  as open as well as cleared items.
    Please suggest how to overcome from this.
    Thanks.

    Hi
    Once it cleared, then it will not appear in open item. This will happen only for partial payment even though we cleared. For that particular invoice, we done partially 2,3 times and cleared, in that payment doc any one doc containing future date. So that you should give the date which having future date in fbl5n.
    For example: Invoice date 10.12.2011, payment done(posting date) 11.12.2011,12.12.2011,.....20.12.2011
    But whenever checking in fbl5n, we always check with current date. Invoice is cleared. so that it will show cleared item, but according the current date its open only. So that it will show open item also. If you are changing into final date with reference of payment doc, then it will not appear in open item
    Regards
    Mani.S

  • Cleared items to be open.

    Hi,
    How to convert d Cleared items in to open items documents.
    Reg/Vs

    Dear Vinu,
    Go to FAGLB03, select the GL Account Appearing in your FSV that is showing the Open item. This must be your recon account for Customers > Execute the report.
    This report will display All items of all customers assigned to this recon account. Filter out Open items only. After this, Press Control F8 to change the layout > Include the customer in the layout. Once you have done that, Click on the customer column in the report and Press Control F1 (Subtotal). You will be able to display the customers balance appearing in your FSV.
    You can also display Customer Balance report through the T-CODE "J3RFDSLD". You will be able to see the balance of all customers.
    Best Regards,
    Anss Shahid Essani
    Edited by: Shadow_sirjee2005 on Mar 5, 2011 3:56 PM

  • Utilities - open items/cleared items enhancement with HKONT from DFKKOPK

    Hi friends,
    My client needs item level GL Acccount ( HKONT ) from DFKKOPK table for both Opne & Cleared Items. So i enhanced both Datasource( 0FC_OP_01 and 0FC_CI_01) with this new field HKONT which gets data from different table i.e., DFKKOPK. Now i have encountered one problem. The link between these talbes is only OPBEL(FICA doc no).By doing so we are getting item level records but we are not able to figure out the distribution of 'Contract(VTREF)' values across these records.
    For examle for doc no : 900000031212 there are 3 records at DFKKOP base table. But in DFKKOPK table it has 19 records with different sub G/L Accounts. After the execution of CMOD code, in RSA 3 , 3 records are replaced by these 19 records successfully with new sub G/L values but some fields like Contract , Division , cleareding reason etc..are showing only the first records values for all these 19 records. But this gives reports wiith wrong contract and dividion values.
    So my question is " how to bring these SUb G/L account(HKONT) values from DFKOPK table .
    Waiting for good replies,
    Murthy

    We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
    There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
    To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
    What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
    Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
    Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
    Hope that makes sense. Let me know if you want clarification.
    /smw

  • Cleared/Open Item Symbol not Green for Cleared Items

    F.13 process for clearing GR/IR matched items runs to tag documents as cleared. For some reason the Cleared/Open Item Indicator is still showing the status as "Red" for the items which are actually cleared, means the items are shown as "Open" while should be cleared and shown as "closed", this indicator should be "Green".
    Any idea in what instance it can happen?

    When I run the FBL3n, and pull the report for Open Items, I see these items as open while matching entry has been done manually through MR11 to clear the items. The balance shows up as zero. But for some reason the clearing document field alongwith the clearing date field is not being displayed when I display the line item. It looks like the clearing document is not being created at all. Let me know if you have some idea on that. It is GR/IR account so the account is managed as open item.

Maybe you are looking for