Cleared paper jam-printer continues to display clear paper jam-printer will not reset

officejet 8500 909a- cleared paper jam, printer continues to display Paper Jam, clear paper jam then press OK, that does not work. followed all hp instructions and attempted to reset. does not reset. unit is less that 3 years old. can the problem be fixed or should I just buy another printer which by the way more than likely will not be another hp product

Hello,
Here are some common steps to clear the paper jam:
http://h30434.www3.hp.com/t5/Other-printing-questions/False-Paper-Jam/td-p/905169
Another helpful resource to clean paper jams:
http://h30434.www3.hp.com/t5/Other-printing-questions/Paper-Jam-videos/td-p/331916
Hope this helps.
I work for HP.

Similar Messages

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

    HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture. 
    Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

    As far as I know,  you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I JUST PURCHASED A HP LASERJETPRO P1102W BUT THE PRINT DIALOG WINDOW IN CS6 IS DIMMED AND WILL NOT ALLOW COLOR SEPARATIONS TO BE PRINTED?

    I JUST PURCHASED A HP LASERJETPRO P1102W BUT THE PRINT DIALOG WINDOW IN CS6 IS DIMMED AND WILL NOT ALLOW COLOR SEPARATIONS TO BE PRINTED?

    Save as a PDF and print the separations out of Acrobat.

  • HiIs there a way to print continuous tone on old HP5000 BW printer, instead of halftone output?

    I am using a HP5000 printer and want to reproduce newsletters. All the images (continuous tone) are outputing as halftones. Is it possible to print continuous tone with this laser printer?

    Hey there PrincessCupcake!
    Thanks for the detailed post back to me.
    If this was at one time an option for you and now is not, it would make sense to me that an update of some sort had made the option null and void for you, especially if you have completely uninstalled the printer driver and software and then reinstalled it. If the option was going to be available, doing the uninstall and reinstall would have fixed it in a jiffy.
    I am out of ideas as to any other cause besides an update, as you mentioned. If you have installed the printer on another computer, see if the options are there, if not, they aren't available.
    Happy Monday to you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Display driver problem - Premiere Elements will not start

    Premiere Elements 10 will not run on my computer unless I downgrade to an old display driver. I would do this but it causes other problems.
    I am using the most recent driver from NVidia (but a pretty old display card).  I get this message: "We have detected an incompatible display driver... driver details: NVidia Geforce GTS 250/pCIe/SSE2 3.0.0"
    On Windows 7
    Can anybody help with this?

    Have you manually gone to the nVidia web site and downloaded the latest driver?
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    This fixes about 95% of these types of issues.
    Also, you definitely do have a BadDriver.txt file on your computer. And you may need to delete it to clear this error.

  • Printer has new all new ink and still will not print

    I just got back to school and unpacked my HP Photosmart 5514 CQ183A printer. Upon trying to use it I noticed the ink was empty, so I went to the store and bought brand new 564 ink in every color. I installed them all properly and went to print again, and it still did not work. So I pressed "clean printhead" in the tools menu. Ink slowly started to appear on the paper so I "cleaned the printheads" a few more times until it was all perfect. I then printed what I needed, turned my printer off and went to sleep. This morning I woke up and tried to print again and it is doing the same exact thing as last night. Worst part is, it says all of my ink except for black is now empty. How can that be when I just bought all of them last night and only cleaned the printhead 8 times and printed 2 pages of only black ink the night before??
    I bought the printer in late June of 2012 and I only use it when I am at school 7 months out of the year. When I pack up and go home I put the printer back in the box with all the orginal packaging. I do not understand why a printer that has only been used for about 14 months is haveing this problem!

    Hi hellohpthisisst,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print after replacing the cartridges.
    I see you have done the printhead cleaning a few times to try and fix the ink issue you were experiencing, please remember when doing service tasks on the PS 5514 it will use some ink. However you're right, the cartridges should not be empty. I would like you to take a look here and make sure the cartridges are properly vented: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still running into print quality issues, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

    I've followed all suggestions in troubleshooting both from manual and on line.  Shut off firewall, unplugged, plugged waited.  Nothing changes.  All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located.  Help!!

    Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • External Display flashes on and off will not stay on.

    When I turn on my Samsung external LCD display which is connected to the iMac, it flickers on and off and will not stay on. What could cause this problem. I tried different resolution settings to no effect. I had been using the display without problems until recently. I wonder if it was a system software update.

    Are you using some sort of adapter to hook it to the Mac? I know on my iMac that I use an external monitor on I use a mini DVI to VGA connector. If you are using something like that it could be the adaptor.
    I would think if it was software there would be more posts on it. Yours is the only one I have read on this subject.

  • GB Display Amount Error. Pod will not Update?

    So for the past couple days I have been unable to update my Ipod. Using V6, I maunally add music to my ipod, but none of it is showing up. Than I switched over to automatic, to add all the songs in my current library with edited titles that I made, and the Ipod stil doesnt register the change. It will not let me add the music. There is also an error in the GB display it says that 1000 plus songs are taking up 17GB out of the 30 I have. That isn't right. Last week I had 6000 or so and it took up less than that. Im at a loss for what to do. I rest it and that didnt work. I uploaded V7 and same problem, it also gives me this error, "The Ipod '' cannot be updated. the File or Directory is corrupted and unreadable." SOMEONE please help.

    it might be worth checking on the possibility from the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • My printer is showing on my computer, but it will not print.

    Printer is showing on devices and with registered address, but will not print.  I am using an HP laptop.

    Hi pandros;
    I hope you are doing well and welcome to the HP forum,
    Is virtually impossible to provide any asisitance wit hte information provided, I  am eager to do my best to help you.
     I will strongly recommend you to read this post and repost your question accordingly  CLICK HERE.
    This will increase the chances of me as well as other in the forum to help you. Repost after reading this post and I will do my best of assist you.
    Regards;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Dead iPad3. Recovered it in iTunes, but still the display is dead and it will not work.

    My ipad3 will simply not work. It froze and the display went black.
    I've tried to recover it by putting it in recover-mode and connect it to itunes on my computer (Windows 7).
    Itunes found the ipad and the recovery worked out fine (according to iTunes info the ipad battery is charged 57%).
    However, the ipad still will not switch itself on? I have tried the on/off and home button trick as well as the recover in itunes.
    Any other tips?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I work with students developing HTML/CSS pages. Having trouble displaying pictures and graphics offline in web pages. IE displays student graphics, but Firefox will not. Help?

    Students create web pages offline with normal C:/ drive designations. After they have all coding issues worked out, the server address is added prior to uploading code. Graphics are placed in an image folder and code is managed in a pages folder. All located on C:/ drive. However, FireFox will not display pictures. IE will display. Suspect I need to change settings, but don't know what or where.
    Thanks, LD_Gregory

    You not are using the latest Spry files
    The latest  version of the Adobe Spry Framework is 1.6.1, this is the same version  that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry  1.4), its wise to upgrade your files to the latest version. This can  easily be done using the Spry Updater that can be found here.
    If you replace
    <script src="http://www.adelxt.net/SpryAssets/SpryAccordion.js" type="text/javascript">
    with
    <script src="http://labs.adobe.com/technologies/spry/widgets/accordion/SpryAccordion.js" type="text/javascript"></script>
    you will notice that it works as it should.

  • Non-printing items that display in the PDF, but do not print

    I've not found definitive word on this, but we are creating a document in InDesign (CS3 Mac) and would like to include some navigational arrows that advance users from one page to another.
    They would display on screen but would not print when the user prints.
    My understanding is that if we render the PDF from InDesign with those items set as a non-printing layer, that they would not display in the PDF.
    Is there a way to do this?
    Thanks,
    Dave

    Just set the buttons option to Visible but Doesn't Print.
    Bob

  • HP OFFICEJETPRO8500(A 909)a SHOWS PAPER JAMB THERE IS NO PAPER JAMB AND WILL NOT RESET WHEN OK

    IS PUSHED JUST REPEATS JAMB NOTE-ALL SOLUTIONS HAVE FAILED

    RedDoc,
    Take a look at the Document in the link below.
    From the Help Document:
    NOTE: Paper jams can be real or false. The product might report a paper jam even when there is no jammed paper. The following steps apply to both real and false paper jams.
    'Paper Jam' Message Displays on the All-in-One
    There are other options, though they may be more or less related to your situation - start at your printer's webpage and peruse the manuals and other Troubleshooting tips.
    HP Officejet Pro 8500 All-in-One Printer - A909a
    I hope this helps you find and fix the problem with your printer.
    It is my pleasure to assist.
    Say “Thanks!” by clicking the Kudos Star to show your appreciation for the help.
    Fixed?  Mark this Post “Accept as Solution” to help others find the answers.
    Note: You can find “Accept as Solution” only on threads started by you.
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • Report on POs along with its PR item reference

    Dear All Is there any Report on POs which provides the details of Referred PR items also Thanks

  • Cannot set the properties of an itemrenderer in sdk 4

    Hi, I have a project working in sdk 3 that creates an item renderer for a grid, and passes the field index to the renderer. In sdk 4, the property is null. Is this a bug? (code truncated) <?xml version="1.0"?> <mx:HBox xmlns:mx="http://www.adobe.com/

  • How to read  xml with deep  structure into intarnal table.

    Hi, Could you pls any body provide xslt code for deep structure  convert into internal table. sample xml file: - <ns0:CREATIONOFCONTRACT xmlns:ns0="http://BPCreationXSD.CreationOfContract"> - <CREATIONOFCONTRACTDATA>   <RequestType>L0011</RequestType

  • HT5242 Anyone know what the "extended period of time" is?

    Anyone know what the "extended period of time" is when the Java update decides for us when it should turn off automatic applet running?  Looking forward to the hack which allows us to fix that and make the decision ourselves.

  • XI Server Hard disk full, no space available

    Hi Everyone....       XI Server Hard disk, is full. Its showing Zero Bytes. Even there is no option to add another hard disk now. Even though Log files are deleted, it showing zero bytes.       Please provide a solution as soon as possible.