Clearing all data using Maxl

Hi,
Could anyone suggest me what commands to write for below sets using Maxl
1) How how Export zero level data from the cube
2) How to clear all the data into the cube
3) How to reimport the data from the cube.
Thanks

you will want to look at the tech referece http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_techref/frameset.htm?launch.htm
for
export
alter database reset data
and import. (note if you are importing an export, you don't use a load rule, but you do have to abort on error.

Similar Messages

  • Import all data using maxl

    Hi
    we would like to export all data from BSO cube my maxl script,
    as the db is bigger then 2gb, essbase split the file to 2gb each, and we’ll get more then
    one file to import.
    How can I have maxl script which know to import all data files on the specific folder without indicate the names of the data files created...
    Thanks in advance,
    Messi

    This post may be helpful as it covers the same question - Re: Export Lev 0 goes into multiple files....maxl??
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How Long will it take to reset the 16gb ipad with clear all data in it.

    How Long will it take to reset the 16gb ipad with clear all data in it.

    I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1

  • How to clear all data when the form loading at the first time

    hi
    I am using JDevloper 10g and I have adfForm page, I want to clear all data when I load the page for the first time.
    When I did it using RefreshCondition on the pageDef in the executables like(
    <executables>
    <iterator id="FinCompaniesInformaton1ViewIterator" RangeSize="10"
    Binds="FinCompaniesInformaton1View"
    DataControl="AppModuleDataControl" *RefreshCondition="#{adfFacesContext.postback==true}"* />
    </executables>
    the form didn't bring any data but the problem is the field in the form at the run time changed to read only. So how to make it inputText and clear the data inside it at the run time
    best regards
    Tarek Al Soudani

    thank you for your help,my spec is I have ADF Form and I have creat and Edit CommandButton I made it befor also Commite to save.
    so when I run the form the Field should be disabled and there are no data inside it,and when I chose the creat button the fields should be enabled and I have to insert data inside it then I save.
    So I have FinCompaniesInformatonView as view object based on entity object name FinCompaniesInformaton and applicationMoudul.
    I tolde you befor that I made refreshcondition to solve the data clearence problem but the field changed to read only so please if you now any way to leave the fields as inputText whitout make the form as creation form
    beast regards

  • 2g data allowance in single line plan is only for 4g LTE or for all data using?

       I got a single line plan and an iPhone 5s a couple days ago.  I am confused the data allowance is for 4g LTE only or for all data using?  Thank you!

        Hello edsun1997
    I would love to answer this for you. You have 2 GB's to use on our network this will start over at the beginning of your cycle. If you use Wifi and turn off our network, Wifi would not go against that 2 GB bucket.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • I need to clear all data from my old iphone 4 so i can set up a new iphone4

    i need to clear all data from my old iphone 4 so i can set up a new iphone4

    settingss -general - reset - erase all contents and settingss.

  • FDM export to HFM - 2nd export did not clear all data from 1st export?

    Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

    Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

  • Clearing All Data

    Hi there everyone!!
    Im just wanting some information on clearing all my data on my blackberry 8320 curve as im selling the handset for a new handset and wanting to clear all the pictures videos music everything any ideas whats the best way to do this???
    many thanks in advance for you help!!
    All Take A Bow The 8320 Emerald Is Here!!

    Here is some information from BB:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB05099&slic...
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • CLEAR MEMBER DATA USING SCRIPT

    Hi
    Gurus
    i have a b and c members for a dim
    i am trying to add up a b to get c
    now once the c is printed onthe report with a condition that prod dept exist, the values in c should not be populated and the c value will remain for all rows
    and b  a  should  be shown wherre the prod dept  =  y  and c shud not be shown
    please advice how can i clear the dat once  which is posted onthat condition  , now inthe report
    thanks

    Or, if you need to delete only a subset of the data, then you will need to write the calc script to delete the data that will be reloaded, then call the calc script from MaxL.
    Robert

  • May I clear all data in my cloud and start over

    I have had a joint Apple account with my wife. I want to get a separate Apple account for her and then clear my data on the could and use the current account as only mine. How may I do that?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (120133)

  • When I went to charge my ipod, iTunes cleared all data, help?

    I put my ipod onto the usb cord to charge on the computer like always. Then iTunes opened and all my data stored in it was cleared out. It opened as if I just downloaded iTunes. This is the first time it has happened. Please help me determine what triggered this to happen and how to fix it.

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • Can not clear all data in iMessage

    My iMessages was taking up along of room so I deleted every message in my iMessage. But when I go to settings>general>usage iMessage is still taking up 600mb! There are no messages what do ever in my iMessage.
    I tried doing a back up and resource from I tunes but that did not work. It's still showing 600mb. Then I cleared my iPhone and restored and that seams to clear it. But as soon as I do a restore it gets back to 600mb of usage! Obviously something is corrupted. I need to know how to clear iMessage completely with out loosing he rest of my phone profile?
    Thanks 
    I'm on iPhone 5 s with 7.02os

    Also looking for a solution, Messages was up to 2GB so went through and got rid of all pictures and videos, still taking up approximately 600 MB when I go to General > Usage
    Any ideas?
    -iPhone 4S

  • Network based and a-gps, data use tests

    i was trying to find this kind of info, but only found others asking.
    i hope this is useful info for others, especially while roaming.
    skip to the bottom for conclusion,
    this is the process i took:
    i called nokia tech support,
    their phone support his horrible,
    the people on the phone don't actually know anything, and have to look up everything you ask them.
    they were the worst.
    i emailed nokia tech support.
    my message was:
    "i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
    in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
    the first response, minus the hello's etc. was:
    "In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
    Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
    Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
    the 2nd response was:
    "In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that,  A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
    i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
    test 1:
    i enabled:
    integrated gps
    network based
    assisted gps
    opened maps,
    set maps to be offline,
    set default internet access point to my home wlan network,
    closed maps,
    cleared all counters and the log on the phone's communication log.
    opened maps
    there is a pink circle around the area i may be in,
    the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
    but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
    over the course of ten minutes, it's been about 43kb.
    and i can tell on the phone's home screen that the packet data connection becomes active when it does.
    the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
    test 2:
    now i exited maps,
    cleared the counters and logs
    i turned off a-gps.
    enabled only integrated gps and network based.
    i open maps,
    the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
    everything else is happening the same.
    test 3:
    i exited maps,
    cleared the counters and logs.
    enabled only integrated gps.
    i open maps, and there is no evidence of packet data connection, or wlan connection.
    nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
    if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
    the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
    test 4:
    set maps to offline, w/ my wlan as access point.
    exited maps,
    turned phone off for a bit to test gps from cold start.
    turned on phone,
    cleared counters/logs,
    enabled only assisted gps and integrated gps.
    open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
    there's about 4-5kb of data transfer,
    then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
    i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
    i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
    so to conclude my tests,
    setting the maps to be offline, still uses a-gps and network based positioning.
    network based uses a more data, continuously,
    which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
    using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
    might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
    the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

    A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
    Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
    The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
    If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
    If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

  • How do i erase all data on iphone 4s with no wifi working

    how do i erase all data on an iphone 4s. the wifi stopped working after a software update. I have upgraded to an iphone 6 but need to clear everything on the old phone so i can trade it in. Is it possible to clear all data without wifi working?. thanks

    Connect the iPhone to a computer running iTunes and use iTunes on that
    computer to restore as a new iPhone which will wipe current content.

  • Dataload error using MaxL on LINUX

    Hi All,
    I'm using Essbase 11.1.2.1 & working on ASO cube. I'm trying to load the data using Maxl on LINUX.
    This is the following error: essmsh error: End of File breaks the Statement.
    any ideas.......
    Thanks,

    rasch wrote:
    Hi,
    I am using DAQmx-base (C library) on Linux with a USB-6009 device. When I am acquiring data
    using DAQmxBaseReadAnalogF64() (the code is based on the example contAcquireNChan.c)
    everything works, but when I am using DAQmxBaseReadBinaryI16() the following error
    happens:
    DAQmxBase Error: Value passed to the Task/Channels In control is invalid.
    Everything is the same just the ...AnalogF64 is replaced by the ...BinaryI16 function call
    (of course the buffer used for storing the data was also changed from float64 to in16).
    Does anyone know what settings (or missing settings) result in this error?
    Every explanation or pointer to some documentation is welcome. I already checked the
    C reference HTML documentation coming with DAQmx-base without success.
    Thanks
    Raphael
    From the ReadMe file for DAQmx Base on Macintosh OS X:
    NI USB-9211
    *Analog Input
    -Multi-channel, multi-sample read (scaled)
    -Multi-channel, single sample read (scaled)
    NI USB-9215
    *Analog Input
    -Multi-channel, multi-sample read (scaled)
    -Multi-channel, single sample read (scaled)
    NI USB-6008/9
    *Analog Input
    -Digital start triggering
    -Multi-channel, multi-sample read (scaled)
    -Multi-channel, single sample read (scaled)
    Raw input simply isn't supported for the USB devices. I would guess that the situation for Linux is the same, since DAQmx Base is based on Labview code in order to achieve cross-platform portability. See the thread
    http://forums.ni.com/ni/board/message?board.id=250&message.id=11873
    and, for a slightly different problem:
    http://forums.ni.com/ni/board/message?board.id=250&message.id=11963
    Be sure to read down to where there is a message indicating that support for USB devices is planned for NI-DAQmx. Of course, that won't help on Macintosh and Linux.
    John Weeks
    WaveMetrics, Inc.
    Phone (503) 620-3001
    Fax (503) 620-6754
    www.wavemetrics.com

Maybe you are looking for