Clearing cash memory

Hi,all
I have a problem with viewing image after it has been updated.
In my requiment I replace one image by another and after that
I have to see a new image instead  of ancient,but I still see the
ancient,that is not existing already(replaced by new image in
KM repository).May be the problem is that the ancient image
is still existing in cash memory and I need to clear it?If yes,how?
Or may be the problem is ather?
Any ideas?

hi,
I had faced a similar problem of new images not getting reflected, after they are updated.
I dont have the solution, but how to bypass it.
Rename the image-file name.
Eg: if its s_b_image.gif, then rename it to s_b_image_new.gif or something like that.
<b>If you want to clear the cache memory, the only way to do it is to Restart the J2EE of your server.</b>
I hope this helps,
Regards,
Hanoz

Similar Messages

  • Hello,  I want to know how to clear the memory or buffer cash from my mac book?

    Hello,  I want to know how to clear the memory or buffer cash from my mac book? When I look at the series, it puts more and more time to load. Thank you.
    Sorry for my english, i talk french.

    Ok ce n'est pas le problème alors.
    Boot à partir de votre disque d'installation et de lancerl'utilitaire de disque. Le disque de démarrage peut être nécessaire de réparation.
    Using Disk Utility to verify or repair disks
    Ok that's not the problem then.
    Boot from your install disc and run Disk Utility. The startup disk may need repairing.

  • I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?

    I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
    If so, what do I need to d

    WOsloop_ORD wrote:
    I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
    No you don't.
    Mac's auto-defragment by writing 2GB+ sized files and smaller to one space on the drive, so you really don't need to worry about it.
    If your going to parititon your drive or need a large space of free space, then Carbon Copy Cloning the entire OS x parittion to a external drive, option booting off of it and then erasing and reverse cloning is the approved  method of defragmenting and freeing up disk space, rahter than using defragmentaiton software that can cause issues and make the machine inoperatible.
    http://www.bombich.com/
    If you need steps to *cough* clean your Mac of caches and whatnot less your kid/wife/mother/girlfriend/boss, see's it then the steps are as follows.
    1: Clean/clear your browser caches first, delete your history etc. from within the program itself, delete any files on the machine by dragging to Trash and emtpy Trash (secure erase not needed if you follow the steps later)
    2: Download CCleaner for the Mac and run that
    3: Download OnyX for the Mac and run all the cleaning and maintainece, reboot at the end.
    4: For scrubbing hard drives of traces (deleted files), use Apple's Disk Utility > Erase Free Space option: Zero (or 7x if you need military/foresic level type deletion, but it takes overnight to complete)
    Make sure your browser plug-ins are current, Flash, Silverlight especially.
    https://www.mozilla.org/en-US/plugincheck/
    And your Mac needs more codecs, search for Perian, VLC and Flip4Mac, install those.

  • I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?

    I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff.  How can I clear the memory space used by my deleted videos and photos?  I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

    Hey there TowneJ,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
    If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
    So long,
    -Jason

  • Clear ABAP memory

    Hi,
    I am using the EXPORT " ..." TO MEMORY ID '....'.
    IMPORT '..' FROM MEMORY ID "..."
    Can i clear the memory after the import.
    Pls let me know.
    Rohita

    Hi Rohita,
    Yes you can clear the memory.
    Check the below code.
    DATA: v_flag TYPE i.
    START-OF-SELECTION.
      v_flag = v_flag + 1.
      EXPORT v_flag TO MEMORY ID 'LV_KUM'.
      IMPORT v_flag FROM MEMORY ID 'LV_KUM'.
      write:/ v_flag.
      <b>clear v_flag.</b>
      EXPORT v_flag TO MEMORY ID 'LV_KUM'.
      IMPORT v_flag FROM MEMORY ID 'LV_KUM'.
      write:/ v_flag.
    END-OF-SELECTION.
    <b>FREE MEMORY ID 'LV_KUM'.</b>

  • Why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've  but made n o diff. tried clearing cashe's  and browsing data but made no diff grrr

    why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've  but made n o diff. tried clearing cashe's  and browsing data but made no diff grrr

        Check  whether you are currently  in  YouTube HTML 5 trial?
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".

  • Need to clear SAP memory

    Hi Experts,
    I need to Clear SAP memory set using the 'Parameter ID' keyword in reports. Please advise.
    Thanks in advance,
    Vivenchandar R

    Sure, you can simply set the parameter id to a blank field.  For example.
    data: vbeln type vbak-vbeln.
    vbeln = space.
    set parameter id 'AUN' field vbeln.
    Regards,
    Rich Heilman

  • After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

    After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Clear printer memory

    I have a Deskjet 4480 which is great but I cannot figure out how to clear the memory. There has to be a simple way. It's so frustrating when the printer goes on printing stuff that I don't want anymore.
    Thanks for any suggestions.

    For the Deskjet 970  (and perhaps the Deskjet 4480?) there is a cancel button on the printer (the X button).  Pressing this will immediately cancel printing, although the job will continue spooling to the printer.  The reason turning the printer off and back on does not clear the issue is that the document is held in the computer's queue and will be resent when the printer is turned back on.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Clear the memory

    Hi,
    how do I clear the memory according to operations with Images?

    All you can do is set objects to null and call System.gc() to request a garbage collection.
    This just frees up memory on the heap - maybe you need a bigger heap....
    Have a look at a tool like perfAnal (Its on Suns site).
    MArk

  • How do I clear off memory usage from "calendar" it kept on building up

    The calendar usage in my ipad kept on building up, although I don't store anything on it, how do I clear the memory usage?

    When you connect your phone to the Mac, iPhoto should fire up and offer to import your photos. So do so, selectively if needed. Then make sure they are backed up to external media in case your Mac dies. Then delete them from the camera roll in the iPhone.
    Read how Sync works. The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

  • Videos missing from iPhoto after prompted to clear from memory card

    I just imported a couple of videos from my GoPro camera into iPhoto. After the videos were imported, I created an album. Once the videos finished importing I was prompted on screen to erase the video's from the memory card and that the import was complete. I did erase them. I then imported more pictures and videos from my regular camera into iPhoto and also following the prompt to erase the memory card post import. The pics/video from the regular camera are there, but my GoPro videos are not. I cleared the memory card so I can't re-import them. It seems they have to be on the computer somewhere since it said "Import complete, Erase Memory Card". Are they still on here somewhere or gone forever?

    Create a smart album with the criteria
    and check there to see if you can find the missing videos.  If not then you'll need a file recovery app like  PhotoRescue to try too recover the files from the memory card.  There are other similar apps that can do the job.  Go to MacUpdate.com and search for photo recovery.  Most have a demo mode to show you if you can recover the file before you have to purchase it.
    Never let iPhoto or other import app delete the files form the memory card.  It's best to make sure the download was successful and that all files are viewable/playable before deleting from the menory card.d  When memory cards are involved it's best to let the camera reformat the card than let the app or the Mac do the deleting/reformatting.

  • How to clear cache memory

    Hi again! Does anyone has the source code in J2ME for clearing cache memory? My application is consuming larger memory in long run and I need to clear the cache memory manually else my application will be 'hanged'. Please advise.
    Thanks in advance!
    Regards,
    TK

    It's equivalant, so System.gc() will look like this:
    public static final void gc(){
       Runtime.getRuntime().gc();
    }Nothing more, nothing less. It's not really faster, since the compiler will probably inline it.

  • I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what

    I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what and what is the correct procedure?  Rick

    To determine if it is, boot into Safe Mode and see what happens. http://support.apple.com/kb/HT1455
    In the Activity Monitor, what are the Page Outs and Page Ins?

  • Clear the memory in flash

    Hi,
    Please any one tell me how to clear the memory in flash.

    What problem are you having - what memory needs clearing?

Maybe you are looking for

  • How to use User defined Function in Update statement

    Hi All, I have written below update statement to update column based on value return by function. but it is not working. Could any one help me on this. This function will return only one value for each project. thanks in advance. UPDATE dg2.OD_PROJ_L

  • How do I import video from Sony TRV22E into iMovie ?

    How do I import video from Sony TRV22E into iMovie ?

  • Formatting a string

    Hello All Is there a way I can use format specifiers with variables? OK so I need to format a string to be a certain length equal to the longest string I am using. So what I would like to use is something like: %xs where x is the number of the length

  • Hi need ur help reg work flow

    If a "Critical"  Material is entered in (i.e.: as soon as 103mvt doc.posted), a mail has to be sent to     "MRP controller" of that particular material.     [ Critical item is defined in the Purchasing View of Material Master(Other Data) ].   -  What

  • Lightroom 5 - JPEG files saved to folder but did not import into catalog

    I am using Lightroom 5. My camera is set to save each image as RAW & JPEG. At import, I chose to "Copy as DNG". In the Lightroom catalog only the DNG files are imported. However, in the folder there are DNG files and JPEG files. Why didn't my JPEG im