Clearing customer line items

Hi,
Consider the scenario where we have a SD invoice $1000. There is a partial payment $800 made with reference to this SD invoice.
Prior to my SAP system upgrade, the final payment with clearing via F-28 will post the following accounting entries:
Dr bank            $200
Cr customer     $200
After SAP upgrade, similar steps are carried out via F-28 and the accounting entries are:
Dr bank           $200
Cr customer    $1000
Dr customer    $800
Has anyone encountered this before where there should be a consolidated line item posting to customer with amount $200 instead of 2 separate line items?
Thanks

Hi
Can you compare the settings in OBY6 Negative postings permitted check box for your company code and OBA7 Doc type Negative postings permitted check box in old system and in your new upgrade system?
I think in your old system either in OBY6 or in OBA7 might have selected that option
Pls verify and if it is not there in your new system make the necessary changes and post the same document again for testing purpose
Reg
vishnu

Similar Messages

Clear Customer Line Items

Experts,
Is there anyway we can clear customer open items ? - I am looking for a similar transaction like f-44 like we have for clearing vendor open line items.
All answers would be duly appreciated and rewarded with points.
Thanks,
Nandita

FB1D                 Clear Customer
FBA3                 Clear Customer Down Payment
F-32                 Clear Customer
F-39                 Clear Customer Down Payment
VVR

Unable to clear customer line items for a particular company code

Hello,
For a certain company code, even though open items are present for some customers, i am unable to clear them using F-28 or F-32.I am getting the message 'No open item exists', Anyone come across this scenario before?

Hi:
Make sure you are giving proper selection criteria for the processing open item. May be the items are Special GL based transaction so you need to select special GL indicator to process open item. Please also refer to OSS Note 136754 - F-03, F-32, F-44, F-28 missing open items. Hope this will help you.
Regards

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

Profit Center in Customer Line Item

Hi SDN,
We have created a validation during posting of Sp Gl transactions for both Vendor or Customer. This validation mandates the profit center in the Vendor/Customer line item to ensure that a profit center will be derived even for documents with purely balance sheet items (e.g. Dr AR Cr Bank Inc Clearing)
We were successfull in bringing out the profit center in the vendor line item (for Special GL transactions)
However, for customer special GL transactions, we did the same settings as with the vendor settings (updated FSG and posting key to activate profit center) but system does not show profit center field for customer sp GL transactions.
Any idea as to why only customer line item does not reflect the profit center while the vendor line item shows it?
Thanks

Hi,
What is the special GL indicator account type?
Have you changed the FSG settings for special GL account?
Rgds
Murali. N

Clearing customer open items

Hello!
Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
With all the best,
Merlin

Hello,
IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
Give your chart of Accounts
1. Create your account symbols
Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
2. Assigning Accounts to Account Symbols
Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
3. Create Posting Rules
Create freely definable posting rules.
4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
a) For all the payments you need to create the entries for posting area 1
b) For all the receipt you need to create the entries for posting area 1 and 2
c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
d) If you want just only entries to be posted use posting type 1.
e) If you want to clear the check, then use the posting type 4.
f) Configure according to the entries to be posted.
g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
5. Create Transaction Type
Create freely definable Transaction Type
Select the transaction type and assign the external transactions to your posting rules.
For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
6. Assign Bank Accounts to Transaction Types:
You need enter the Bank Key / Bank Account / Transaction type here.
You can get the the bank key and bank account details from table T012K (Go to SE16)
Further supplementary notes may be useful to you:
There are different programs to upload electronic bank statement.
FF.5 or FF_5.
I think your case Multicash format you are using.
You need have three files in FF.5 and two files in FF_5
You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
1. Take all the external codes list from bank.
2. Take any available documentation from the Bank describing the relevance of the external codes.
3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
4. Based on this decide the Account Symbols that are required to be created.
5. Make sure that the masking rules are configured properly.
6. Decide the posting rules that needs to be created.
7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
6. Concentrate on the posting areas to be posted while uploading the bank statement.
Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
Vendor Account Dr
To Bank Sub Account
The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
Bank Sub Account Dr
To Bank Main Account
It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
The entries would system itself pass is:
Bank Main Account Dr
To Bank Sub Account
Bank Sub Account Dr
To Cutomer account.
Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
Ideally you will use
FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
GO THROUGH SAP NOTE 48854
Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
Though this note is in relevant to GB specific, you will find this very useful.
description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
1. '00': There is no processing. The entry line is ignored.
2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
3. '02': Transfer of the ending balance to the electronic bank statement
4. '03': Transfer of the opening balance to the electronic bank statement
5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
Note
To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
62 SAPBACS + GB63 000 5
7. '06': Bank costs or interest revenues
Recommended interpretation algorithm: '000 - No interpretation'
8. '07': Total amount of cash disbursements
9. '08': Total amount of cash receipts
10. '09': Items not paid
Recommended interpretation algorithm: '000 - No interpretation'
Regards,
Ravi

How to view customer line items in S_ALR_87012197

Hi frends,
what is the selection criteria for customer line items list in S_ALR_87012197 as i am preparing the EU document for it and till now i didnot use that one.so that i dont have much idea about the icons in that screen.the concept is i need to explain them very very simple format as they want spoon feedup in the EU documents.
Regards
Sap Guru
[email protected]

In that it is Posible to Open items and Cleared items
and also open and cleared items?
Parked items noted documets and standard items wht u want select that check box and excute it?
in that repost there is change variant there in that lot of options availble in sap what i want select and if u dont want optins surpress it ?
now u r clear
i think

Issue while clearing open line items

Hi team,
While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
Regards,
Nagaraju.

Dear:
The option to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
Please check OSS note 95077. Check the settings in
IMG >Financial Accounting (New) >General Ledger Accounting (New) >
Business Transactions >Document Splitting >Activate Document Splitting
Check the following link for the same
F.13 clearing Document contains Lineitems
Regards

How to clear the line items once posted...

hello experts,
i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
i m providing the tech names of the fields...
same program for both the transactions-- sapmf05a screen no for f-48--304 and
f-43 ---110....
Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
SPECIAL GL A/C RF05A-UMSKZ(structure)
thanks n regards,
vamshi

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

Enhancement on fi/co to clear the line items...

hello experts,
i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
i m providing the tech names of the fields...
same program for both the transactions-- sapmf05a screen no for f-48--304 and
f-43 ---110....
Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
SPECIAL GL A/C RF05A-UMSKZ(structure)
thanks n regards,
vamshi
**highly rewarded**

hi Vamshi,
chekc if on the selection screen of F.13 the special G/L transactions are properly selected. Also check the customizing for automatic clearing (i. e. which fields have to match).
ec

Sales office in Customer line items

Presently using FBL5N for details of customer line items. Now the user wants the customer details Sales office wise.
Tried to change the selection views of logical database DDF used in this program but couldn't as it doesn't include table KNVV. SPRO config also doesn't have this table.
Is there any other standard report to achieve this except customized report development.
Kindly resolve.
thanks
annie

Hi Anya
You can get the required data through SQVI by table joining KNVV (field VKBUR) and VBRP.
Let me know if this is not clear and require more details on that.
By the way dont forget to reward points if this is useful to you.
Regards
G. Lakshmipathi

Customer Line items table

Hi Gurus,
In which table we can find the customer line items.
Thanks in advance

HI,
Table
BSID- customer open line items
BSAD- customer cleared line items
Regards,
Kiran

Customer line items ledger view in ECC 6.0 other than FBL5N

HI
Is there any other T code for customer line items ledger view in ECC 6.0 other than FBL5N
thanks

Hi Jagadeesh,
There are some bunch of reports avaialble in SAP for customer Lines item display,
S_ALR_87012168 - Due Date Analysis for Open Items
S_ALR_87012197 - List of Customer Line Items
S_ALR_87012173 - List of Customer Open Items for Printing
S_ALR_87012174 - List of Customer Open Items
S_ALR_87012175 - Open Items - Customer Due Date Forecast
S_ALR_87012176 - Customer Evaluation with OI Sorted List
S_ALR_87012177 - Customer Payment History
S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
S_ALR_87012198 - List of Cleared Customer Items for Printing
S_ALR_87012199 - List Of Down Payments Open On Key Date - Customers
Please check the above mentioned reports
Hope its useful to you
Regards
Saravanan.A

Clear the line items more than 999 through F-28

Hi,
I have one issue,
senario is like below:
Step1:
F110 - Create the payment order for customer. if customer have more than 999 line items also payment order is updating
Step2:
Clear the invoices with referece to Payment order in F-28
here while clearing the customer line items using payment order referece if line items is more than 999 for customer it is not allowing to clear. error message is line items more than 999.
I have checked with tecnical people can we split the clearing if more than 999 line items. as per them is if it is not referece to payment order it is possible to write some code based on document type or posting date they can split.
here it is not possible. I tried with summrizaiton senario as specified in sap notes if line items more than 999. it is not also working.
i have one more question also while running f110 can we restrect the payment order to geneare upto 999 line items if it exceeds it should create other payment order of remaing line items so on.. is it possible?
can any body give a light to resove this issue.
BR:
Venkat.Gurram

Hi,
I have already checked that link .
I have implemented the note: 36353 for summrizaiton.
for payment order we can't do sumarization due to we can't the payment order while cleargin.
give me some other idea
BR:
Venkat.Gurram

Clear_document FM not working to clear customer open item.

Hi Experts,
1) I need to develop a report to clear the customer open items, the report has to display whether the Customer open items cleared or not?
     As we do f-30 transaction to clear documents.
   I have developed the report in this ways but its not clearing.
    a) First I have posted the document through   'BAPI_ACC_DOCUMENT_POST
    I have filled the document in the below way. The Bapi returning OBJ_KEY value also.
LOOP AT it_data INTO wa_data.
****Fill DOCUMENTHEADER
    wa_docmentheader-doc_type     = 'DA'.   "doc type
    wa_docmentheader-doc_date    = wa_data-bldat.   "doc. date
    wa_docmentheader-pstng_date = wa_data-budat.   "posting date
    wa_docmentheader-comp_code   = wa_data-bukrs.   "company code
    wa_docmentheader-ref_doc_no = wa_data-belnr.   "Reference
    wa_docmentheader-header_txt = wa_data-bktxt . "Header Text
    wa_docmentheader-username    = sy-uname.        "user name
****Fill ACCOUNTGL Table
    wa_gl-itemno_acc = l_no.
    wa_gl-gl_account = 2909509----" which i marked in the screen second red color(ACCount).
    wa_gl-alloc_nmbr = wa_data-xref2.
    APPEND wa_gl TO it_gl.
    CLEAR wa_gl.
****Fill ACCOUNTRECEIVABLE
    wa_receivable-itemno_acc = l_no + 1.
    wa_receivable-customer = wa_data-kunnr.
    wa_receivable-gl_account = wa_data-saknr.
    wa_receivable-alloc_nmbr = wa_data-xref2.
    APPEND wa_receivable TO it_receivable.
    CLEAR wa_receivable.
****Fill CURRENCYAMOUNT
    wa_currencyamount-itemno_acc = l_no.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
    wa_currencyamount-itemno_acc = l_no + 1.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    wa_currencyamount-amt_doccur = wa_currencyamount-amt_doccur * -1.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader
= wa_docmentheader
IMPORTING
OBJ_TYPE
=
obj_key
= lv_obj_key
OBJ_SYS
=
TABLES
accountgl
= it_gl
accountreceivable = it_receivable
ACCOUNTPAYABLE
=
ACCOUNTTAX
=
currencyamount
= it_currencyamount
return
= it_return.
EXTENSION2
=
endloop.
2) After posting the document am using Clear_document to clear the document
   am filling the Clear_Document in the below way.
1. a)get belnr, bukrs, gjahr & buzei from bsid table for invoice and append to T_AUSZ1
    b)T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
2. a)get BELNR, BUKRS, GJAHR, BLART & BUDAT from bkpf where awkey = OBJ_KEY(which you get from BAPI_ACC_DOCUMENT_POST bapi)
b) get belnr, bukrs, gjahr & buzei from bsid table where BELNR EQ bkpf-BELNR AND
                      ZUONR EQbkpf-BELNR AND
                      BLART EQ bkpf-BLART AND
                      GJAHR EQ bkpf-GJAHR AND
                      BUDAT EQ bkpf-BUDAT
and append to T_AUSZ1
c) T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
delete duplicates from T_AUSZ2.
3) but am not able to clear the document using Clear_document Function Module
4)I am able to post the document through BAPI_ACC_DCUMENT_POST
5)Please tell me how to clear the document.

Hi Sunny,
Please see the following :
1. Down Payment Received (2500 INR.) F-29
2. Customer Invoice Posted (2500 INR.) FB70
3. Clear Down Payment (2500 INR) F-39
4. Now Run Automatic Clearing (F.13)
And then check the Customer line item report in FBL5N. It will clear both line items.
Hope this helps.
Kind Regards,
Prakash Kumar

Clearing customer line items

Similar Messages

Maybe you are looking for