Clearing/downdating stock (with batch numbers) error messages

Hi,
We are trying to clear down some stocks with batch numbers and have tried MB1A LT01/LT10. However, we get the following error messages (all individual);
Deficit of BA Unrestricted-use (Deficit of BA Unrestricted-use 56.855 KG : 4589 BP01 0088 0000199415)
Storage unit 4000289374 is not consistent with other transfer order data
Showing zero for stock & cannot clear transfer order
How can we clear the stocks please?
Thanks
Keeley

Deficit of BA Unrestricted-use is a pure MM message.
It just tells you that you have no stock of the mentioned batch 0000199415 of material 4589 in plant BP01 at storage location 0088.
check in MMBE where or in what status your stock of this batch is, then change the fields in MB1A accordingly.

Similar Messages

In which tables are batch input error messages logged?

does anybody know in which table are the batch input error messages logged?
I have to display the error messages which have occured during the transaction
I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
does anybody know about the batch input error messages?

hi,
check the sample code below.
messtab is of type BDCMSGCOLL.
Call the transaction and then use T100 to get the message.
DATA: l_mstring(480).
call transaction using
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
SKIP.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: /4 messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: /4 messtab.
    ENDIF.
ENDLOOP.

DTW Stock with Serial Numbers

Hi all, I DTW'd some stock in through the GRPO template. I then AP'd the invoice. Due to some administrative issues I had to credit the Invoice thus reversing the stock. So the Serial Numbers are all reflecting as unavailable.
I need to re-import the stock with the same serial numbers and different costs. The DTW is giving me an error "(Serial Number) for item (Item Code) in line 1 already exists (in unique field)/Application defined or object defined error65171"
I realise that these serial numbers are already in the system, but if I manually capture these on the GRPO the the application asks me to confirm this already exists. There are almost 2000 items to capture. Please could someone advise if there is possibly a field on the DTW template (purchase delivery) I could populate that overides this error"

Are you using the oInventoryGenEntry templates? The serial numbers template I have contains 3 serial numbers - Internal, Manufacturer & System. The system serial number is the unique key and is system generated.
Try the following to get a list of on hand stock with serial numbers:
{SELECT T0.ItemCode, T0.ItemName,
      T1.WhsCode, CASE WHEN ISNULL(T2.SysSerial,-1) = -1 THEN T1.OnHand ELSE 1 END [Quantity], T0.AvgPrice,
      T2.SysSerial, T2.IntrSerial
FROM OITM T0
      INNER JOIN OITW T1 ON T1.ItemCode = T0.ItemCode
      LEFT OUTER JOIN OSRI T2 ON T2.ItemCode = T1.ItemCode AND T2.WhsCode = T1.WhsCode AND T2.[Status] = 0
WHERE T1.OnHand <> 0    and t0.ManSerNum = 'Y'
ORDER BY T0.ItemCode, T1.WhsCode, T2.SysSerial}
You may need to tweak it a bit for your eviironment.

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled

My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled and reinstalled it but it will still not open.

It worked for me, any way we have to do following things now, I have seen this happens becasue of the corrupt dll for Visual C++ packages. if the following thing will not work, I am affraid we have to reinstall the windows 7
Good Luck
Try to remove all the Visual C++ 2010 Redistributable and Visual C++ 2008 Redistributable Packages (both x86 and x64) from the Control Panel
Download and install following Visual C++ Redistributable Packages
Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
Microsoft Visual C++ 2010 SP1 Redistributable Package (x64)

When syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing.

when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.

I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

Stock Transport Scheduling Agreement - error message: 'Stock in transit...

Stock Transport Scheduling Agreement - error message: 'Stock in transit exceeded'
Hi, I do have a question about transport scheduling agreements.
I have created a stock transport scheduling agreement via ME37, doc. type LU for a stock material from issuing plant TT01 to receiving plant TH01. The material is maintained in both plants.
After that,I maintain the delivery schedule via ME38 for a quantity for today. The quantity is available at issuing plant TT01, checked via MMBE.
Then, I try to post the goods via MIGO. When I try to post the document, I get the following error message: "PL Stock in transit exceeded by 1,000 T% : 794 TH01 S1". Why do I get that? My target is to decreate the stock quantity in TT01 and to increase the stock quantity in TH01.
Thanks, Peter

Hi,
This happens when you are issuing more on the schudle qty, Check you have anything on the transit receive it the try agin to process the issue.
Hope it helps.
Suresh

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!

TS1717 Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

Hi Laura-Wedders,
Thanks for visiting Apple Support Communities.
On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If you are still experiencing issues, you may want to troubleshoot with the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
All the best,
Jeremy

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

What is going on with the FATAL error message????

What is going on with the FATAL error message????

Same issue, since last night. Can't sign in to iTunes, download apps, or updates to apps on any device. I have iPhone 4S, iPad mini, MacBook Pro. East coast, writing this at 1:21pm EST. Changing password doesn't work. I can't log in with my iCloud address either. I have however noticed at least that if I enter the wrong password, I just get the incorrect password message. Using the right password gets the FATAL:: message every time.
I have my devices set to UK for the region even though I am in the US. Though that might have something to do with it so I switched to US- no change, same problem.
I agree that acknowledgement via their system status would be appropriate. Irritating that they are not at least publicly acknowledging there is a problem. I would feel much less concerned if I knew that they were aware and working on it. Can't find a support number anywhere but I did send a brief message via their help/contact page.

Clearing/downdating stock (with batch numbers) error messages

Similar Messages

Maybe you are looking for