Clearing entries in File Sharing

Setup:
- Mini, C2D (last gen)
- Using the most basic server setup
Using File Sharing in Server Preferences, there are several entries in there that don't exist on the file system anymore -- how do I get rid of them? I've tried to remove them from this pane, stopping sharing and removing, etc -- it's simply not accurate because I can't remove shares that don't exist anymore (folders moved, etc.

You have to recreate the shared folder then unshare it ...

Similar Messages

  • Reset File Sharing authentication entries

    On a OSX.6 client I have connected to a OSX.6 server.
    The client remembers name and password I have used to mount the volume.
    I want to delete these entries in order to begin the connection with another user/password.
    I have deleted the entry in Key Chain Access, but still a new connection does not ask me a new authorization.
    What files/prefs else do I need to delete?

    Thanks for the link biovizier, that was enough information for me to figure it out :)!!!
    HERE ARE THE INSTRUCTIONS:
    (1) click on Finder and then "go to folder", type in /var/db/dslocal/nodes
    (2) then do a get info on the "Default" folder and allow EVERYONE read+write access
    (3) do the same for the the following two folders, CONFIG and SHAREPOINTS
    (4) do a get info on the Public.plist file, and allow EVERYONE read+write access
    (5) rename the Public.plist to "username's Public Folder.plist"
    (6) open this file in a text editor (I used SubEthaEdit), and change every instance where it just says "Public" to "username's Public Folder"
    (7) save the file, and change the permissions of that file and all of the folders above back to "no access" for the EVERYONE group
    Close and Restart File Sharing in System Preferences .... and you're done!
    It'll still say the folder being shared is "Public" inside of System Preferences, but when users connect, it'll say "username's Public Folder"

  • EBS Clearing Entries issue

    Hi All,
    I configured EBS and tested the interface file successfully with Intprt Alg 13 for outgoing Checks. My issues is, though the BAI2 file note to payee field check number doesn't match with SAP Check Number, clearing entries are being posted for the Amount in the file for the record. I am confused here...It should not post the clearing document if the check information does't match. Why is this happening. Please help !!

    Cache Sizes
         Begin     End          
    Buffer Cache:     25,600M     25,600M     Std Block Size:     8K
    Shared Pool Size:     11,264M     11,264M     Log Buffer:     14,276K
    Instance Efficiency Percentages (Target 100%)
    Buffer Nowait %:     100.00     Redo NoWait %:     100.00
    Buffer Hit %:     98.90     In-memory Sort %:     100.00
    Library Hit %:     82.28     Soft Parse %:     98.41
    Execute to Parse %:     93.10     Latch Hit %:     99.94
    Parse CPU to Parse Elapsd %:     6.76     % Non-Parse CPU:     96.54
    Shared Pool Statistics
         Begin     End
    Memory Usage %:     90.13     91.72
    % SQL with executions>1:     80.70     98.91
    % Memory for SQL w/exec>1:     88.60     98.82
    Top 5 Timed Events
    Event     Waits     Time(s)     Avg Wait(ms)     % Total Call Time     Wait Class
    latch: library cache     6,451     53,588     8,307     78.9     Concurrency
    CPU time          13,287          19.6     
    db file sequential read     1,508,672     3,739     2     5.5     User I/O
    enq: TM - contention     352     1,030     2,925     1.5     Application
    db file scattered read     49,533     493     10     .7     User I/O

  • Desperate - file sharing issue from MacBook to IMAC

    I'm reaching the end of my tether - I am using a new IMAC as my central computer which gets backed upto onto a time capsule - I have a MacBook which I wish to be able to access the files on the IMAC, make changes and save ( word, excel) - this is so that when my wife is at the main computer I can still work on my college work that’s on the IMAC.
    I log into both machines with the same user / password - on the IMAC I have enabled file sharing for the documents folder and given myself read& write access - I have done this via the system preferences method ( using the sharing option) and the get info method by right clicking on the folder - via the get info method I have enabled ' apply to enclosed items ' so that the permission rights are applied to all files in the folder.
    I access the IMAC from the finder window on the MacBook - connect as me ( ie the same user and password that I have logged onto both machines with ) and then find the file that I need to work on - it opens but when I come to save its says the fie is read only - what is odd is that on the same file from the MacBook I can change the name of the file and even delete it remotely from the MacBook.
    I have tried various permutations to see if I can ascertain the route cause – for example - if in the sharing preferences window I activate file sharing, in the shared folders window I activate the relevant documents folder on my IMAC but clear the 'users' list of everyone including myself (which in theory should stop me accessing the file on the IMAC from the MacBook I’m assuming ) then when I try to access the folder /files from my MacBook I still get the same issue - I can open docs but can't save
    help ....help .... help .....!

    If you are logging in to the account on the remote machine, you already have read/write privileges. If it is the default ~/Documents folder you used the "apply to enclosed items" on, you passed on the "everyone deny delete" ACL entry that was on the folder - you should never use the "apply to enclosed items" option for system created folders. What are the permissions amd ACL entries for the files and the enclosing folder?

  • File Sharing Configuration

    Does anyone know where the file sharing settings in System Preferences are stored? I work with an iMac that has 4 standard accounts and 1 administrator account with File Vault, and somebody removed 2 of the standard account's public folders from the shared folder list. File sharing is really important for us, but when I try to manually add them again it just adds Public and Public-1 instead of User 3's Public Folder and User 4's Public Folder. I've tried renaming and editing the files under "/private/var/samba/shares" but the changes don't take even following restarting the service and a reboot and are eventually reversed and the files renamed back to public and public-1.

    Did you bother reading the error? "You should start smbd/nmbd/winbindd instead for domain member and standalone file server tasks" is pretty clear.

  • File sharing in the File server preference pane

    System preferences to File Server to File sharing. When I choose a share point folder and want to change permissions, I click the radio button to restrict access to certain users and save. When I re-enter the the folder it defaults back to let everybody have access. If I try to delete the folder it won't delete. When I create a new folder by re-choosing the folder, I get <folder Name>1 and then I cannot delete it. Is there a plist in preferences I can delete to clear this problem?

    Hello Peter,
    Thanks for your answer.
    There must be something wrong in the different steps I follow.
    Firts I set Time machine on the server for each user, shoosing the Volume "SmartStor" (a network volume attached on the Mac Mini server) it creates a "Shared items" folder with a "Backups" folder in.
    In Server Admin tools I can see in the AFP services the share point /Backups
    In Workgroup Manager I set the Time Machine's preferences for the different computers and computers' group with the path afp://myserver.local/Backups/
    At least on my client's computer I can shoose the volume "Backups" "on my server".
    And it doesn't work... even with all the logins and password, User's, Dir Admin and Server Admin.
    With User's and Dir Admin it runs quickly and tells "the volume is not reachable on account of wrong user's name or password"
    With Server Admin login and password it runs indefinitly, nothing occurs ...
    Is there something to do in terminal ?
    Well I tried to find explanations on the web but I found nothing for the moment... The informations are to set a network volume in Terminal in place of the default one...
    'Hope to find soon, I can't stand that something runs for every one but not with me...

  • File Sharing on a Network and it only works one way

    I recently configured a new wireless network, and want to fileshare between my Mac and old PC. I have followed several tutorials, and I can read/write to the Mac from the PC. However, when I try to connect to the PC from the Mac, it asks for username and password. I type in the only user name and password setup on the PC, and it says I do not have access to that server. Any ideas?

    There is a "Server" service, and it is running on the laptop. The file I needed to move was ~150GB - wifi would be faster than OneDrive. You can appreciate my desire for full gigabit speed :)
    I can connect to the laptop from the desktop over wifi. So the functionality of sharing is all there for me. But I am completely unable to set the wired network's location to "Private", which essentially enables Windows Firewall rules under the hood that
    block any file sharing connections.
    I can manually edit the firewall rules, but these apply only to network location profiles, i.e. "Domain", "Public", "Private", or "All".
    I'll post a few screenshots to try and make this more clear.
    Here is my wifi connection. Highlighted in red you can see the option to enable file sharing. Prett slick.
    Here is a screenshot of my wired connection. As you can see, the option to enable sharing is completely missing. 
    The only explanation I can come up with for this is that it is an "Unidentified network", however on the other end of the cable is a desktop with the same connection settings running the same OS with the same updates and on that machine the network is set
    to "Private" and has file sharing enabled. The option to enable or disable file sharing does not appear on the desktop either. The only difference between the two is that the network was enabled on the desktop prior to updating to Windows 8.1 (from Windows
    8), the laptop had Windows 8.1 clean installed.

  • Personal File Sharing Keeps Turning Off.

    I have a second notebook, a Powerbook G4 Titanium 667 which is still amazingly useful for all but the most demanding apps and I regularly leave an external hard disk connected to this which I access by attaching to the G4 from my Macbook, via Finder, in the Server section. I authenticate and then choose the external disk volume and it mounts no problem.
    My issue is that since a recent batch of software updates (perhaps a week ago), I no longer see the G4 in the Servers list. I returned to the G4 and found that Personal File Sharing was not longer enabled. I re-enabled it and locked the preferences again. I then see the G4 from my Macbook, connect as before and the volume mounts for a few seconds before being disconnected. I am then unable to reconnect. When I visit the G4 again, I find that the preferences are still locked but now Personal File Sharing is DISABLED.
    I've not found any way around this, but console indicates that AppleFileServer failed. The crash report log does show the error. Here's the head of the file's last entry:
    Host Name: powerbook-g4
    Date/Time: 2008-04-13 08:52:48.696 +0200
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: AppleFileServer
    Path: /usr/sbin/AppleFileServer
    Parent: launchd [1]
    Version: ??? (???)
    PID: 6379
    Thread: 4
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0x00705000
    I've found references to other apps causing this but no mention of this with a G4 / 10.4.11. Any advice appreciated.

    Welcome to the forums!
    Reading the title I was certain I knew the answer, but I've never thought to have anyone check or report the Log on this, soooo, maybe I don't know and this might be something different.
    But usually this is fixed by dragging one or more of these files to the Desktop, Rebooting, setting up again... it may just be one, or many at a time needed...
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Users/nnnnLibrary/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    Then, if it's certain other kinds of connections, there may also be files like this...
    /Users/nnnn/Library/Preferences/ByHost/com.apple.networkConnect.<ethernet MAC address>.plist

  • Personal File sharing is on but not working

    This problem has been plaguing me for some months. When I try to access the problem computer on the network it will not show up until I turn off Personal File Sharing and then turn it back on. Then all works fine for several days until it doesn't work, and then I repeat the process (turn PFS off and then back on again) to make it work. I can't make an association with any third party programs that might be contributing to the problem.
    I thought that the problem might go away with the purchase of a new iMac (10.4.10) and initialized with Migration Manager. Apparently, I imported the problem.
    In the past I've tried restart with opt-cmd-P-R which works for awhile and then the process start over again. I've also tried dragged /Library/Preferences/com.apple.sharing.firewall.plist to the trash and restarted.
    Anybody have any ideas on how to solve this one? Is there a log file that might show when PFS is tampered with?
    Thanks in advance.

    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Also, if you trash those files again, and it re-occures again, I'd suspect RAM maybe.

  • Personal File Sharing Turns off after an attempt to connect from other comp

    I have personal file sharing turned on on my MacBook and when I attempt to connect to it from my iMac I get a typical logon windows and extended delay and then the message that the Server Connection was Interrupted. When I check Personal File Sharing on the MacBook it has been turned off even though I have locked the settings.
    The problem exist whether I use my local Wireless LAN (Apple-N) or an ethernet connection. In both cases the MacBook the ethernet connection is with the a port on the Apple N wireless LAN

    It may be solved for you, but I just discovered that since upgrading to 10.4.11 I can no longer connect to any of my other Macs. When I click on network NOTHING shows up in the Finder.
    While I'm happy to grab random code posted by an unknown person and stick it in my system, I shouldn't have to. Clearly Whatever the update did to your Mac it did to my MacBook as well and most likely others. If this is the official fix for the problem, Apple needs to acknowledge it and offer a link to the file rather than relying on fix-it forums to solve their problems.
    Apple seriously needs to test these updates a little more thoroughly before they make them available. I KNOW you are supposed to back everything up before you do it, yada, yada, yada ... but Apple has basically made the Software update feature an automatic function as if it is the best thing for your computer ... clearly that is not always the case.

  • Problem in BDC: Not Picking the second entry of file

    Dear Friends,
    I have been working on a BDC and have been facing a problem. This code uploads the first entry of my file properly but repeats the same entry again second time, doesn't refresh or take the second entry of the file.
    Please have a look at the code & suggest the necessary corrections.
    Regards,
    Alok.
    report ZFBPS_BDC
           no standard page heading line-size 255.
    data: bdcdata1 like bdcdata occurs 0 with header line.
    data : vf_index type i.
    *include bdcrecx1.
    DATA: BEGIN OF ENTRIES OCCURS 0,
            RECNO(5),
            NEWBS(2),
            NEWKO(17),
            NEWNUM(1),
            WRBTR(13),
            GSBER(4),
            KOSTL(10),
            SECCO(4),
            ZFBDT(8),
            zuonr(18),
            SGTXT(50),
            FMORE(1),
            HKONT(10),
            PRCTR(10),
            AUFNR(3),
            MWSKZ(2),
            XBLNR(16),
            BKTXT(25),
    END OF ENTRIES.
    DATA: TEMP(8),
          DOCDATE(8),
          SPLGL(1),
          PKEY(2),
          GL(17),
          VCHAMT(13),
          BUSAREA(4),
          SECCODE(4),
          FBDT(8),
          zzuonr(18),
          COSTCEN(10),
          AUFNR(3),
          SGTXT(50).
    data : vf_start_col type i value '1',      "start column
           vf_start_row type i value '1',      "start row
           vf_end_col   type i value '256',    "maximum column
           vf_end_row   type i value '65536',  "maximum row
           p_text(20).                         "stores error messages
    Internal Table
    data : it_excel type  kcde_cells occurs 0 with header line.
    */ Field symbol
    field-symbols : <fs>.
    parameters: p_file   LIKE rlgrap-filename MEMORY ID M01,
                NOHEADER AS CHECKBOX.
    parameters: COMPANY(4) TYPE C DEFAULT 'SCL',
                GROUP(12) TYPE C DEFAULT 'BDCTEST',
                USER(12) TYPE C DEFAULT SY-UNAME,
                KEEP(1) TYPE C DEFAULT 'X',
                POSTDATE LIKE SY-DATUM DEFAULT SY-DATUM,
                DOC_TYPE(2) TYPE C DEFAULT 'KR',
                HOLDDATE LIKE SY-DATUM.
    ***********************************************upload data from excel
    CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
      EXPORTING
        filename                      = p_file
        i_begin_col                   = VF_START_COL
        i_begin_row                   = VF_START_ROW
        i_end_col                     = VF_END_COL
        i_end_row                     = VF_END_ROW
      tables
        intern                        = IT_EXCEL
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3 .
    IF sy-subrc <> 0.
              WRITE: / 'EXCEL UPLOAD FAILED :', p_file, SY-SUBRC.
    else.
      sort it_excel by row col.
          loop at it_excel.
         IF NOHEADER = 'X'
        AND It_EXCEL-row = 1.
          CONTINUE.
        ENDIF.
         vf_index = it_excel-col.
       assign component vf_index of structure ENTRIES to <fs>.
            move  it_excel-value to <fs>.
          at end of row.
            append ENTRIES.
            clear ENTRIES.
          endat.
          endloop.
      endif.
    start-of-selection.
    LOOP AT ENTRIES.
      WRITE: /  ENTRIES-RECNO,
                ENTRIES-NEWBS,
                ENTRIES-NEWKO,
                ENTRIES-NEWNUM,
                ENTRIES-WRBTR,
                ENTRIES-GSBER,
                ENTRIES-SECCO,
                ENTRIES-ZFBDT,
                ENTRIES-ZUONR,
                ENTRIES-SGTXT.
    ENDLOOP.
    WRITE: / 'THIS IS THE BDC PROGRAM FOR SAMTEL'.
    perform bdc_dynpro      using 'SAPMF05A' '0100'.
    perform bdc_field       using 'BDC_OKCODE' '/00'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR' 'RF05A-NEWKO'.
    TEMP = POSTDATE.
    DOCDATE = TEMP+6(2).
    DOCDATE2(2) = TEMP4(2).
    DOCDATE4(4) = TEMP0(4).
    *PERFORM BDC_FIELD USING 'BKPF-BLDAT' DOCDATE.
    *PERFORM BDC_FIELD USING 'BKPF-BLART' DOC_TYPE.
    *PERFORM BDC_FIELD USING 'BKPF-BUKRS' COMPANY.
    *PERFORM BDC_FIELD USING 'BKPF-WAERS' 'INR'.
    *PERFORM BDC_FIELD USING 'BKPF-BUDAT' DOCDATE.
    *PERFORM BDC_FIELD USING 'BKPF-XBLNR' 'Deepak'.
    *PERFORM BDC_FIELD USING 'BKPF-BKTXT' 'Sahib'.
    LOOP AT ENTRIES.
    REFRESH BDCDATA1.
    perform bdc_dynpro      using 'SAPMF05A' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD USING 'BKPF-BLDAT' DOCDATE.
    PERFORM BDC_FIELD USING 'BKPF-BLART' DOC_TYPE.
    PERFORM BDC_FIELD USING 'BKPF-BUKRS' COMPANY.
    PERFORM BDC_FIELD USING 'BKPF-WAERS' 'INR'.
    PERFORM BDC_FIELD USING 'BKPF-BUDAT' DOCDATE.
    PERFORM BDC_FIELD USING 'BKPF-XBLNR' 'Deepak'.
    PERFORM BDC_FIELD USING 'BKPF-BKTXT' 'Sahib'.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'BSEG-SGTXT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-ZUONR'
                                  ENTRIES-ZUONR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-KOSTL'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_field       using 'COBL-KOSTL'
                                  ENTRIES-KOSTL.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-ZUONR'
                                  ENTRIES-ZUONR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_field       using 'COBL-KOSTL'
                                  ENTRIES-KOSTL.
    perform bdc_field       using 'COBL-PRCTR'
                                  ENTRIES-PRCTR.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'BSEG-WRBTR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_dynpro      using 'SAPMF05A' '0300'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWKO'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_field       using 'RF05A-NEWBS'
                                  ENTRIES-NEWBS.
    perform bdc_field       using 'RF05A-NEWKO'
                                  ENTRIES-NEWKO.
    perform bdc_field       using 'DKACB-FMORE'
                                  ENTRIES-FMORE.
    perform bdc_dynpro      using 'SAPLKACB' '0002'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'COBL-GSBER'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTE'.
    perform bdc_field       using 'COBL-GSBER'
                                  ENTRIES-GSBER.
    perform bdc_dynpro      using 'SAPMF05A' '0302'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'BSEG-SGTXT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=AB'.
    perform bdc_field       using 'BSEG-HKONT'
                                  ENTRIES-HKONT.
    perform bdc_field       using 'BSEG-WRBTR'
                                  ENTRIES-WRBTR.
    perform bdc_field       using 'BSEG-MWSKZ'
                                  ENTRIES-MWSKZ.
    perform bdc_field       using 'BSEG-ZFBDT'
                                  ENTRIES-ZFBDT.
    perform bdc_field       using 'BSEG-SGTXT'
                                  ENTRIES-SGTXT.
    perform bdc_dynpro      using 'SAPLFWTD' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'WITH_ITEM-WT_WITHCD(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=GO'.
    perform bdc_dynpro      using 'SAPMF05A' '0700'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWBS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BS'.
    perform bdc_field       using 'BKPF-XBLNR'
                                  ENTRIES-XBLNR.
    perform bdc_field       using 'BKPF-BKTXT'
                                  ENTRIES-BKTXT.
    perform bdc_dynpro      using 'SAPMF05A' '0700'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF05A-NEWBS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    perform bdc_field       using 'BKPF-XBLNR'
                                  ENTRIES-XBLNR.
    perform bdc_field       using 'BKPF-BKTXT'
                                  ENTRIES-BKTXT.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'FB01' using bdcdata1 mode 'A'.
    ENDLOOP.
           Start new screen                                              *
    form bdc_dynpro using program dynpro.
       clear bdcdata1.
      bdcdata1-program  = program.
      bdcdata1-dynpro   = dynpro.
      bdcdata1-dynbegin = 'X'.
    append bdcdata1.
    endform.
           Insert field                                                  *
    form bdc_field using fnam fval.
       clear bdcdata1.
        bdcdata1-fnam = fnam.
        bdcdata1-fval = fval.
    append bdcdata1.
    endform.

    Hi
    You better use LSMW instaed of using BDC for FB01 Transaction. The Problem is not with REFRESH.
    Regards,
    Anji

  • File Sharing between Snow Leopard MacBook Pro and Mac OS 8.6 Powerbook 1400

    well ok, for some this might sound ridicule. Why should I still be using a 13 year old PowerBook. Let me tell you, this is writing/typing heaven, Zen-like; no distractions at all, no twitter, no internet (although possible), no emails just pure you and your text and if you spin down the HDD, absolute silence. as said before pure Zen writing heaven. and on top of that you're typing on the best keyboard ever on a laptop.
    As you might see I love my vintage masterpiece of a laptop and use it on a regular basis. Just one Problem.
    Since I Installed Snow Leopard on my MacBook Pro 17" I just haven't been able to establish a connection between the two machines.
    I have to admit, I'm not that versed with OS 8.6 but with 10.5 I had absolutely no problems accessing the shared folders on my MacBook Pro and vice versa.
    My first thought was to activate Appletalk on the ethernet on my Macbook, which I failed to find anywhere. The Apple Discussions Forums revealed that Appletalk has been dropped with the introduction of Snow Leopard but all the entries where regarding printing issues with shared printers, I didn't find anything about actual file sharing and thus did not get any clues how to share files between my two machines.
    My PowerBook 1400cs/166 runs on 8.6 and I use a Global Village Platinum PCMCIA card (modem and Ethernet combi card). this setup worked perfectly with 10.5 but I have not been able to make establish a connection since running 10.6 on my MBP.
    I am really desperate since I heavily depend on being able to exchange files between those two machines through an ethernet connection.
    So I kindly ask anyone who might be able to help me to please consider posting any solutions or at least ideas which could help me with my problem. I really would greatly appreciate any effort whatsoever.
    Thank you very much for your time.
    EDIT:
    What I forgot to mention: strangely enough, when I enable Internet Sharing on my MacBook Pro (through Airport) to Ethernet, my PowerBook 1400 can connect to the internet without any problems.
    Message was edited by: Apolloss

    First of all let me thank you very much. It actually works (partially).
    There seems to be a problem though. While I can connect perfectly from my MBP 10.6 to my PowerBook 1400, the other way round doesn't work.
    My MBP does not show up in the Network browser of OS 8.6 but I could life with that.
    The problem is that if I try to connect to my MBP from my PB1400 by entering the IP directly a alert message appears reading that the "User Authentication Method required by this server can't be found, please check the AppleShare folder in the Extensions folder and try again".
    Do you have any clues what I'm doing wrong or where the problem may lie?
    PS.
    Even if you may not be able to further help me with this problem, I ow you a great deal of gratitude and am very thankful for your help so far. At least I can exchange files between the two machines and that's what I needed in the first place.

  • File sharing in iTunes can't save file as says the required file can't be found

    I have an app which records video surveys (Miituu). I export the responses within the app and then use the file sharing section of iTunes to save the exported folder onto the PC so that I can access the files. However, despite the exported survey showing in iTunes in the file sharing section and displaying a MB size every time I try to 'save to...' it comes up with an error saying
    'xxx' could not be copied because an error occurred. The required file could not be found'
    Any ideas?

    You might try resetting the App Store application and clear the cookies via this menu:
    as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
    OT

  • Difference between File Sharing, Dropbox, and Public Folder?

    I have this MBP out front & my Mac Mini in back. I'm comparatively new to networking, altho I've used File Sharing (FS) & Dropbox (Db). It seems now, there are a myriad of ways to sync my two computers. (ICloud is also used, just for Mail & iCal, since those are the only two I have that Apple allows on iCloud. I have the computers networked w/ an Airport Extreme. That all works flawlessly.)
    I'm aware of Apple's Drop Box, but it doesn't work since the two computers are over 30' apart.
    The three subject features all do the same thing, I believe, so along with this question, I'm asking which of the 3 is preferable. Dropbox confuses me because it refers to the Public Folder, when it seems only necessary to drag a file to the Db folder, rather than the Public Folder. Anyone know where the Public Folder fits into the Db scheme of things? Or even into the FS scheme of things? Or even into the total file sharing/snycing landscape? My hunch is to ignore the Public Folder.
    As to File Sharing, if I opt for this, then I don't need Db or the Public Folder. Right? The problem w/ FS is that both machines need to be up & running (and not in a Sleep mode). Also, FS is irrelevant when it comes to the Web. On top of all this, most apps come w/ the capability to upload files, photos, etc., for the Web. I'm in a situation where I need to keep track of what I'm sharing, whether it be through FS, Dropbox, or the Public Folder.
    I would really like to simplify my workflow by settling on just one means of syncing my two computers. I'm aware that Db is good for sharing files not only between my 2 Macs, but putting stuff on the Web.
    How do some of you share data between computers? What do you go with? All 3, 2, or just one? How do you keep things straight?

    I'm aware of Apple's Drop Box...
    You mean AirDrop.
    The three subject features all do the same thing, I believe...
    No, they're entirely different.
    File Sharing is a file service that works over a local network.
    Dropbox, which I've never used, is a cloud-based storage and file-synchronization service.
    The Public Folder is the subfolder of your home folder that's accessible to other users of the same computer, and also to other users on the network if File Sharing is active. (The term "Public Folder" may have another meaning in the context of Dropbox.)
    How do some of you share data between computers?
    There are many ways to do that, in addition to the ones you mentioned. It's not really clear what your requirements are.

  • How to optimize Mac file sharing speeds over LAN?

    I got a new NetGear R7000, and I find it very fast for LAN transfers wired or wireless between Macs running OS X Mountain Lion or Mavericks. Testing large (multigigabyte) file transfers over AFP, an early 2011 Macbook Pro running Mavericks 10.9.1 connecting to a 2011 Mac Mini running Mountain Lion 10.8.5, Ethernet speeds can hit 6 GB per min (800 Mbps) real world and wireless 2.06 GB / min (273 Mbps), real world performance.
    If I perform a similar test for Snow Leopard on both ends, an early 2011 Macbook Pro running Snow Leopard 10.6.8 onnecting to a 2010 Mac Mini also running 10.6.8, has Ethernet transfers topping out at about 1.72 Gigabytes per minute for Ethernet (228 Mbps) and 1.07 GB / min (140 Mbps) for Wifi, real world performance.
    I am wondering if there is anything I can do to speed up the Snow Leopard AFP networking. (There are some applications that run only in Snow Leopard and I would like to have it network efficiently instead of getting rid of it. The Macbook Pro has a partitioned drive so I can boot between Snow Leopard and Mavericks.)
    I know that Apple made some tweaks in file sharing performance in Mountain Lion 10.8.5, and I suspect TCP IP parameters were altered to speed things up dramatically when there were all the complaints about it being slow on Mac Book Airs with 802.11ac. I am curious what Apple did.
    I am wondering if anyone has any tips on how I can improve AFP file sharing performance in Snow Leopard. Are there TCP IP parameters, or plist entries, or other hidden settings I can change? Parameters I can tune in sysctl.conf? I am hoping a real network guru can come on here to advise on some advanced techniques I can use to speed up AFP on Snow Leopard. It is the Macs running Snow Leopard that need to be tuned, not the router, as speeds are very fast sharing between Mountain Lion and Mavericks.
    Also, for any/all Mac OS versions, are there networking parameters that I can tune to speed up transfers that involve a very large number of very small files? Even recent versions of OS X slow down greatly on this.
    Thanks in advance

    Anyone have any ideas? What kind of speed do others see through gigabit Ethernet, with snow leopard or Lion?

Maybe you are looking for