Clearing fi doccument for vendor in f-44
Dear frineds,
I have posted vendor invoice for a material; which is exciseble. After posting the invoice in MIRO i found that i didn't maintain excise part for that material. So, for that i had reverse the invoice doccument in MR8M. After reversing it gives a message: reversed doccument no xxxxxxxx, clear the fi doccument manually. For this i can use F-44, but i don't know how ia can clear the doccument there.....
Please help me in this issue..
Regards,
kumar.....
Hi
There would be two transaction in the Vendor account one with debit amount and other with credit amount.
So when you go to f-44 , enter Vendor number enter Company code , Clearing date ( could be today's date) , click on process open item , you will see both the line items there ( assumed there is no other transaction in that account) , select both the the line item one of plus sign other of minus sign , so the total will be zero at the bottom,
Once you done this click on the save button. your document is cleared
Regds
Rajiv
Similar Messages
-
Payment block rerlease for vendor/customers
Hi Gurus
which t-code we used for payment block rerlease for vendor/customers
regards
MallikarjunaHi,
For more clear Use FK05 for vendors
Give company code and Vendor account no
enter
You get screen where you should deselct payment block either code / all company codes
For customers FD05
Same procedure
If it is useful please assing points
Thanks
RAM -
Clearing problem for vendor open item
while clearing open item of vendor through T-code F-44 i am facing the problem following problem
Document splitting :-Item for clearing 1000/100020603/2006/005 not found,
Daignosis as given in error:-document splittting cannot be performed clearing because it was not possible to find complete splitting information items to be cleared(company code 1000, doc. no.100020603, item 005). procedure as provided by the error massage is that the item was not posted with active document splitting. In this case this item or document would have to be migratedDear Sweta,
I think there is no such a table, as you expect, existing in SAP. As I know here are the
most popular table about Accounting documents.
Accounting documents
BKPF Accounting documents
BSEG item level
BSID Accounting: Secondary index for customers
BSIK Accounting: Secondary index for vendors
BSIM Secondary Index, Documents for Material
BSIP Index for vendor validation of double documents
BSIS Accounting: Secondary index for G/L accounts
BSAD Accounting: Index for customers (cleared items)
BSAK Accounting: Index for vendors (cleared items)
BSAS Accounting: Index for G/L accounts (cleared items)
If you need information about open line items of a certain day, you have to use ABAP.
Regards.
Maxielight. -
Automatic open item clearing for vendor/customers
Dear All,
For My client they want Automatic clearing process for vendor & customer Open item. What are the configuration settings i have to do for this how it will be process.
please guide me to do this process.
girijaHello,
For my understanding:
1. You mean how you can post icoming payment in an efficient way when you have a lot of open items per customer? Right?
What information do you get from customer? invoice number? If yes you can search per invoice number and post partial payment.
2. PDC cheque? Do you mean a post dated cheque. Well I think that this customer is a late payer.
The date when you get the mony on your bank account is relevant! In my opinion.
I do not know your local GAAP rules. Normally you bring cheque to bank and the next day you have incoming payment on your bank account. Usually the bank account papers are posted with document date. As an instance: bank account papers from 18.11.2013 here document date and posting date ist 18.11.2013.
BUT: In this case I would ask your local auditor how to handle this, and what are the issues you have to take care.
3. I have sent the material. Sorry, forget email one this was German version, last email ist English version.
all the best Erwin -
Logical database for vendor cleared items
Hi,
What is the logical database for vendor cleared items. KDF is giving me only open items.
Actually I am preparing a report which uses vendor cleared items and trying to get the list from BSAK table. Which would be the better way (faster process for better performance)
a) directly fetching data from database table like BSAK or
b) by using logical database
any ideas please.
regards,
mallikIf just display of all cleared items in a report, then i would suggest you to go for Query development instead of a z report and use BSAK. Being Index table and query, we can reduce several errors in logic/easy to develop/less time.
If you need Z report only, then also, you can go for BSAK. Where as BASK is secondary index table which helps to fetch data fast.
In one way, BSEG - BSIK = BSAK for your case!
Regards
Sridevi -
F.13 automatic clearing for vendor
Hi experts,
My business process step is :
1. Create vendor invoice
2. Create payment request
3. Run payment run
After the payment run, the clearing account for payment request and payment run is automatically cleared. But the vendor invoice and payment request is still open and not cleared automatically.
I'm thinking to have a automatic clearing to clear the invoice and payment request, but the situation is like this :
example :
I have 2 invoice, amount = 100 RM and 200 RM
I created 1 payment request for total 300 RM
How to configure the automatic clearing rules in OB74 to get those 2 invoice cleared by 1 payment request doc ?
Anyone can help me ?
Thanks,
MelissaHi. If you pay and invoice with reference to PO so customize Autoclearing for PO,bukrs,
-
Problem abt automatic clearing for vendor
Dear all,
when we do automatic clearing for vendor with F.13, the system promoted that " Company code blocked by payment program (table T042X)"
whatelse need to do? Anyone know that?
Thanks in advance.
kathyHi All,
I am facing exactly the same problem.
I checked the table T042X, but the payment run which is mentioned there, is not visible in the drop-down menu for F110. May be it has been marked for deletion...
Let me know if there is some way to delete such Payment runs which are marked for deletion...May be that will slove the error in F.13. -
Automatic clearing for Vendors F.13
Dear All,
I have done MR8M ie reverse for Miro document, it shows a msg that FI Documents shud be clered manually, Our client has N number of such documents So i tried to do F.13 Automatic Clearing , but a Msg says " Account was selected, but is not entered in table TF123 " So how am i supposed to do automatic clearing for vendor. Kindly Please Guide me
Regards,
R.Ramakrishnaraj,Hi,
Table TF123 for Additional Rules for Running Programme SAPF124 (Clearing).So u just maintain that and proceed.
Hopes its usefull
R.Manigandan -
Issue during clearing for vendors
Hi All,
When making the clearing for vendors, am getting the below error message:-
"Net document types are not allowed when clearing".
Whereas I have not given any document type while clearing. What to do?
Regds,
BhaveshHi,
Go to transaction OBA7 and check that whether for document type AB (Which is use for clearing in F-44), "Net Document Type" is checked. If yes, then deselect it.
Net document tyes should not be used for clearing as not relevant there.
Regards,
Gaurav -
Hi SAP Gurus,
Could you help me on this, How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors.
Regards
MohanHi Ramakrishnappa,
If you clear the invoice against payment, then the invoice clearing date would be payment document posting date.
Regards,
Mukthar -
Tables for vendor invoice and payment
Hi Gurus.
I want to know from which tables i can get the information for folllowing points.
1. Vendor Invoices - Complete (Header and Item)
2. Vendor Payments Details Detail about payment method (check, wire, etc)
Please tell me tje table names.There is no specific table for header/item data for vendor invoice. Various information regarding vendor invoice (FB60) are stored in the following tables( note: Ignore the structures in the list ).
|Table Name |Table Description |
|/BEV3/CHKOMPAZVV |Append Structure CH -> CO PA |
|/CWM/ACCIT |Append Structure for Enhancement of Structure ACCIT in CWM |
|/CWM/KOMP |Catch Weight Management Enhancement |
|/DSD/TAXJURCD |Ship From Tax Jurisdiction Code: for Header Prc Comm Str |
|/SAPNEA/J_SC_LFA1 |Subcontractor Information |
|/SAPNEA/J_SC_LFB1 |Subcontracting Management |
|/SAPPSPRO/A_FI2_LONGNUM |IBU-PS: Append structure for structure NONBSEG |
|/SAPPSPRO/A_LONGNUMBER |additional fields for SPIIN number |
|/SAPPSPRO/EADD |Purchasing Document Header: Additional Data |
|/SAPPSPRO/EADD_DATA |Purchasing Document Header: Data Part Additional Information|
|/VSO/R_KNA1_A |Append to KNA1 for Vehicle Space Optimization |
|/VSO/R_KNA1_I |Additional Data for Vehicle Space Optimization for KNA1 |
|AACCHD_FMFG |US federal fields |
|AACCHD_PSO |IS-PS: ACCHD Append Structure for Payment Requests |
|AACCIT_GM |Append for Grants Management |
|AACCIT_PSO |IS-PS: ACCIT Append Structure for Payment Requests |
|AACCIT_SSP |Append for Payment Statistical Sampling Process |
|AACCIT_USFG |Append structure for US federal government |
|AAUSZ_CLR_USFG |Clearing information for US Fed (Tresury Confirmation) |
|ABKPF_PSO |IS-PS: BKPF Append Structure for Payment Requests |
|ABKPF_UMB |IS-PS: Append Structure for Transfer Transaction FMITPO |
|ABSID_PSO |IS-PS: Data appendix of open items customers |
|ABSIK_PSO |IS-PS: Data appendix of open items vendors |
|ABSIS_PSO |Local Authorities |
|ABUZ |Help Structure for Line Items to be Generated Automatically |
|ACCCR |Accounting Interface: Currency Information |
|ACCCR_FKEY |Key: Acctg Currency Data for Line Item Including Currency |
|ACCCR_KEY |Key: Accounting Currency Data for Line Item |
|ACCFI |Interface to Accounting: Financial Acctg One-Time Accts |
|ACCHD |Interface to Accounting: Header Information |
|ACCHD_KEY |Key: FI/CO Document Header |
|ACCIT |Accounting Interface: Item Information |
|ACCIT_EXTENSION |ACC Document: Additional Item Information |
|ACCIT_JV |Joint Venture Accounting |
|ACCIT_KEY |Key: FI/CO Line Item |
|ACCIT_WT |Withholding tax information for FI Interface |
|ACCRDF |Fields for Posting Small Differences: Preparation |
|ACC_DOCUMENT |Accounting document |
|ACC_KONTEXT |Context Info for FI Single Screen Transactions FB50 and FB60|
|ACERRLOG |Return Parameter |
|ACGL_HEAD |Fields for Document Header Entry Screen |
|ACGL_ITEM |Structure for Table Control: G/L Account Entry |
|ACSCR |Communication Structure for Field Modification SAPLFDCB |
|ACSPLT |Carrier for Split Information re: Current Account Line Items|
|ACSPLT_WTNEW |Proportion of New Withholding Tax |
|ACSPLT_WTOLD |Proportion of Old Withholding Tax |
|ADDR1_SEL |Address selection parameter |
|AEBPP_KNBK |Additional Fields Bank Data Biller Direct |
|AEBPP_LFBK |Additional Fields Bank Data Biller Direct |
|AFMIOI |Append for new fields ECC50/ERP |
|AFMIOI_USFG | SD order needs quantity |
|AFMISPS |Additional Fields for Table FMISPS |
|AFM_ACCIT_EXTENSION |Extension for FM Payment Update |
|AFM_FAGL_GLT0_ACCIT_EXT |Extension FM Account Assignments |
|AFM_FI_BKPF_SUBST |Append to Structure BKPF_SUBST |
|AFM_FMFCTF |Append for Fund Center substrings |
|AFM_FMFINCODE |Append for Fund substrings |
|AIFM01D |Append for IFM01D |
|AKNA1_FMFG |US Federal Government Customer Master Data Additional Fields|
|AKNA1_PSO |Local Authority Additional Fields |
|AKNB1_PSO |IS-PS: Customer Master Record, Additional Data (Co.Code) |
|AKNBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALFA1_FMFG |US Federal Government Vendor Master Data Additional Fields |
|ALFA1_PSO |Local Authority Additional Fields (Address) |
|ALFB1_FMFG |PS fields for company code-specific master data field |
|ALFB1_PSO |IS-PS: Data Appendix Vendor Master Record (Company Code) |
|ALFBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALVDYNP |ALV dialog screen fields |
|ALV_S_FCAT |Field Catalog (for LVC and for KKBLO) |
|ALV_S_FILT |Filter Criteria (for LVC and for KKBLO) |
|ALV_S_GRPL |Group Levels (for LVC and for KKBLO) |
|ALV_S_LAYO |Layout (for LVC and for KKBLO) |
|ALV_S_PCTL |Structure for Checking Print in ALV |
|ALV_S_PRNT |Print settings (for LVC and KKBLO) |
|ALV_S_QINF |Structure for Quickinfos of Exceptions |
|ALV_S_SGRP |Field Groups (for LVC and for KKBLO) |
|ALV_S_SORT |Sort Criteria (for LVC and for KKBLO) |
|ANBZ |Help structure for asset line item |
|ANLZACCOUNT |Additional Account Assignment Objects in Asset Accounting |
|ANLZACCOUNT_FKBER |Account Assignment Objects: ANLZACCOUNT with Function Added |
|ARC_PARAMS |ImageLink structure |
|AT003_XBLNR2 |Append structure for US federal government |
|AUSZ1 |Clearing Table 1 |
|AUSZ2 |Clearing Table 2 |
|AUSZ_CLR |Assign Clearing Item to Cleared Items |
|AUSZ_CLR_ASGMT |Assgt of Clrg Items - Cleared Items with Acct Assignment |
|AUSZ_INFO |Open item data for clearing transactions |
|AVBKPF_FMFG |US federal |
|AVBKPF_PSO |IS-PS: Append Structure VBKPF for Payment Requests |
|AVBSEGDPSO |IS-PS: Append Structure VBSEGD for Payment Requests |
|AVBSEGKPSO |IS-PS: Append Structure VBSEGK for Payment Requests |
|AVIK |Payment Advice Header |
|AVIP |Payment Advice Line Item |
|BALHDR |Application log: log header |
|BALMT |Application Log: Structure for a formatted message |
|BAL_S_CLBK |Application Log: Return routine definition |
|BAL_S_CONT |Application Log: Context |
|BAL_S_MSG |Application Log: Message Data |
|BAL_S_PAR |Application Log: Parameter Name and Value |
|BAL_S_PARM |Application log: Parameters |
|BAPIASCONT |Business Document Service: File Content ASCII |
|BAPIBDS01 |Business Document Service: Reference Structure for BAPIs |
|BAPICOMFIL |BDS: Command File for Transport Entries |
|BAPICOMPO2 |SBDS: Enhanced Component Information |
|BAPICOMPO3 |SBDS: Enhanced Component Information |
|BAPICOMPON |Business Document Service: Component Table |
|BAPICONNEC |BDS: Structure for BDS Links |
|BAPICONTEN |Business Document Service: File Content |
|BAPIDPROPT |BDS: Structure for Properties |
|BAPIFILES |Business Document Services: Transfer Table for File Names |
|BAPIPROPER |BDS: Structure for Properties |
|BAPIPROPTL |BDS: Structure for KPRO Properties |
|BAPIQUERY |BDS Structure for Query Table |
|BAPIRELAT |Business Document Service: Relations |
|BAPIRET1 |Return Parameter |
|BAPIRETURN |Return Parameter |
|BAPISIGNAT |Business Document Service: Signature Table |
|BAPISRELAT |Business Document Service: Relationship Table with Signature|
|BAPIURI |Business Document Service: URI Table |
|BDCMSGCOLL |Collecting messages in the SAP System |
|BDCRUN |Batch input: Runtime analysis |
|BDIDOCSTAT |ALE IDoc status (subset of all IDoc status fields) |
|BDI_SER |Serialization objects for one/several IDocs |
|BDN_FKT |Business Document Navigator: Functions to be Excluded |
|BDWFAP_PAR |Parameters for application function module - IDoc inbound |
|BDWFRETVAR |Assignment of IDoc or document no. to method parameter |
|BDWF_PARAM |Parameters for workflow methods for IDoc inbound processing |
|BKDF |Document Header Supplement for Recurring Entry |
|BKDF_SUBST |Process Interfaces: Substitutable fields during posting |
|BKORM |Accounting Correspondence Requests |
|BKP1 |Document Header Supplement for Update |
|BKPF |Accounting Document Header |
|BKPFBU_ALV |Document Overview: Display Document Headers in ALV Grid Ctrl|
|BKPF_CARD |Credit Card: Append for BKPF |
|BKPF_LINE |Item Category for XBKPF_TAB |
|BKPF_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BKPF_USFED |Append structure for US federal government |
|BLNTAB |Document Number Table for Financial Accounting |
|BNKA |Bank master record |
|BNKAAPP |Appendix to Table BNKA |
|BNKT |Conversion of temporary to internal bank keys |
|BOOLE |Boolean variable |
|BSEC |One-Time Account Data Document Segment |
|BSEC_LINE |Item Category for XBSEC_TAB |
|BSED |Bill of Exchange Fields Document Segment |
|BSEE |Changeable Fields in the Line Item |
|BSEG |Accounting Document Segment |
|BSEGL |Document Segment: Fields Derived for Line Layout Variant |
|BSEGS |G/L Item Transfer Structure for Single Screen Transactions |
|BSEGT |Transfer Table for the Tax Postings to be Generated |
|BSEGZ |Financial Acctg Doc.Segment: Extras and Temp. Storage Fields|
|BSEG_ALV |Document Overview: Document Item Display in ALV Grid Control|
|BSEG_LINE |Item Category for XBSEG_TAB |
|BSEG_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BSET |Tax Data Document Segment |
|BSEU |Line Item Additional Information (Update) |
|BSEZ |Line Item Additional Information (Online) |
|BSEZ_LINE |Line Item Category for XBSEZ_TAB |
|BSID |Accounting: Secondary Index for Customers |
|BSIK |Accounting: Secondary Index for Vendors |
|BSIP |Index for Vendor Validation of Double Documents |
|BSIS |Accounting: Secondary Index for G/L Accounts |
|BSIX |Index table for customer bills of exchange used |
|BTXKDF |Fields for Exch.Rate Difference Posting for Taxes |
|BVOR |Intercompany posting procedures |
|CACS_A_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_A_CUST_COND |Commissions: Customer Fields Condition Technique |
|CACS_A_FIELDSPRICING |Append for Condition Technique Fields from Commission System|
|CACS_S_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_S_CUST_COND |Condition Attributes |
|CACS_S_FIELDSPRICING |Comm.: All Condition Technique-Relevant Commission Fields |
|CACS_S_FSINS |Customer Fields for Condition Technique of Insurances |
|CCDATA |Payment cards: Database fields relevant to both SD and FI |
|CFW_LINK |CFW: Link Info of a Container |
|CI_COBL |Extension |
|CKI_ACCIT_ML |Transfer from MM to ML in accit-structure |
|CNTLSTRLIS |Control stream list |
|COBK |CO Object: Document Header |
|COBK_ONLY |Non-key fields only in COBK (INCLUDE structure) |
|COBL |Coding Block |
|COBLF |Coding block: Tax table structure |
|COBL_COKZ |Assignment types for CO account assignments |
|COBL_DB_INCLUDE |Include with Additional Account Assignments for DB Tables |
|COBL_EX |Coding Block for External Applications (Not CO/FI) |
|COBL_FI |Fields from COBL that Must not Be Overwritten in FI |
|COBL_FM |Additional Fields for FM |
|D010SINF |Generated Table for View D010SINF |
|D020S |System table D020S (screen sources) |
|D020T |Screen Short Description |
|DBSEG |Dialog Supplementation BSEG (Taxes) |
|DD02L |SAP Tables |
|DD03P |Structure |
|DD03V |Table fields view |
|DD07V |Generated Table for View DD07V |
|DD23L |Matchcode ID |
|DD32P |Interface structure for search help parameters |
|DDSHDEFLT |Description of a default value for search help fields |
|DDSHDESCR |Interface: elementary search helps of a search help |
|DDSHFPROP |Characteristics of search help parameters |
|DDSHIFACE |Interface description of a F4 help method |
|DDSHRETVAL |Interface Structure Search Help <-> Help System |
|DDSHSELOPT |Selection options for value selection with search help |
|DDSUX030L |Nametab Header, Database Structure DDNTT |
|DDSUX031L |Nametab Structure, Database Structure DDNTF |
|DDTYPES |Table of all Dictionary types and classes |
|DFIES |DD Interface: Table Fields for DDIF_FIELDINFO_GET |
|DISVARIANT |Layout (External Use) |
|DOKHL |Documentation: Headers |
|DPPROPS |General property structure for data provider |
|DTC_S_LAYO |Structure for Design of Double Table Control |
|DTC_S_TC |Structure for table controls in the double table dialog box |
|DTC_S_TS |Tab Title Structure |
|DYNPREAD |Fields of the current screen (with values) |
|E071 |Change & Transport System: Object Entries of Requests/Tasks |
|E071K |Change & Transport System: Key Entries of Requests/Tasks |
|EAPS_20 |Field Enhancements for EA-PS 2.0 |
|EDIDC |Control record (IDoc) |
|EDIDS |Status Record (IDoc) |
|EDIFCT |IDoc: Assignment of FM to log. message and IDoc type |
|EDIMESSAGE |Transfer Structure with all Sy Fields for T100 |
|EDI_DS |Status record for interface to EDI subsystem |
|EDI_HELP |Help Structure for Reference Fields in EDI Function Groups |
|EK05A |Communication Area Purchasing - Financial Accounting |
|ESKN |Account Assignment in Service Package |
|EUDB |Development Environment Objects |
|EUOBJ |Workbench: Development Objects |
|EXCLTAB_LINE |Lines of EXCLTAB with OK Code to be Deactivated |
|EXISTING_DOC |Original Document |
|F05ACTRL |Control Fields for SAPMF05A and Subprograms |
|FAGLBSEGL_S |Additional Sender Flds from General Ledger for Doc. Overview|
|FAGL_GLT0_ACCIT_EXT |Line Information for Document Splitting |
|FAGL_MIG_S_BUKRS_LEDGER |Combination of Company Code and Assigned Ledgers |
|FAGL_SPLIT_FLD_S |Characteristics Permitted for Split |
|FAGL_S_APPLICATION |Application and Subapplication |
|FAGL_S_BALDIM |G/L Characteristics of Document Split in New General Ledger |
|FAGL_S_BUKRS |Structure with Company Code |
|FAGL_S_BUKRS_EXT |Structure: Company Codes --> Ledgers |
|FAGL_S_CURTYPES |Currency Types of a Ledger |
|FAGL_S_MIG_001 |Structure for Table FAGL_MIG_001 & FAGL_MIG_001_S |
|FAGL_S_MIG_MGPLN_EXT |Structure: Extended Migration Plan Information |
|FAGL_S_T8G40_BS |Split Fields with Characteristic "Balance Sheet" |
|FCRD_VBKPF |Credit Card: Include for Appends for BKPF, VBKPF |
|FCRD_VBSEG |Include for Appends for VBSE* |
|FDM_AR_CASE_ATTR_1 |FSCM DM: |
|FDM_AR_LINE_ITEM |FSCM: DM |
|FDM_AR_RFPOS |FSCM-DM: Enhancemt of Line Item Disp. with Dispute Case Flds|
|FELD |Screen Painter fields (internal) |
|FICCO |Adjustment Values for External Document Items |
|FICCT |Totals Information for Interclient Posting |
|FICTX |Tax Information for ICT |
|FIELDINFO |Field attributes for a specific field |
|FIN1_PARAM |OBNG: Trans. structure for official doc. numbering (global) |
|FIN1_PARAM_FI |OBNG: FI parameters |
|FIN1_PARAM_MM |OBNG: MM Parameters |
|FIPEX_STRUC |Subfields Commitment Item |
|FIPOEXT |Help structure for line items to be generated automatically |
|FIREVDOC |Transfer Structure for Dialog Module FI_DOCUMENT_REVERS |
|FISTL_STRUC |Substructure Fund Center |
|FM01 |Financial Management Areas |
|FMBLSTRING_COMPONENTS |Component of the BL String |
|FMCI |Commitment items master data |
|FMDY |FIFM: Screen Fields |
|FMFCTR |Funds Center Master Record |
|FMFG_ACCIT_EXTENSION |Extention for all fields that have to be transfered into BL |
|FMFINCODE |FIFM: Financing code |
|FMFPO |FIFM: Commitment Item |
|FMHRBA_NEG_DOC_TYPES |HR Integration: Doc. Types for Negative Funds Commitments |
|FMHRBA_SETTINGS |Integration with HR: Settings |
|FMHRBA_VAD_SETTINGS |HR Integration: Generate Value Adjustment Docs for Changes |
|FMICCN |FM: Append Structure for FMIOI (CCN Fields) |
|FMIDATA |Common Data for Funds Management Actual Data |
|FMIDATAFI |Clean FI Data for Funds Management Actual Data |
|FMIDATAOI |Clean Open Item Data for Funds Management Actual Data |
|FMIFIIT |FI Line Item Table in Funds Management |
|FMIKEY |Common Key for Funds Management Actual Data |
|FMIKEYFI |FI - Key for Funds Management Actual Data |
|FMIKEYOI |Common Key for Funds Management Actual Data |
|FMIOI |Commitment Documents Funds Management |
|FMIOIKEY |Key for Table FMIOI |
|FMIOI_USFG | SD order needs quantity |
|FMIREF |Ref. Funds Management Actual Data to Preceding Document |
|FMISPS |General Parameters for Funds Management |
|FMIT |Totals Table for Funds Management |
|FMMRESERV |Include for the Reduction of Funds Reservations (FM) |
|FMRFC |Function Modules and their RFC Destinations |
|FMSP_SPLIT_FIELDS |PSM Fields used in multiple account splitting |
|FMT001 |Additional Customizing for Funds Management |
|FMUP00T |Update Profiles |
|FMUP01 |Update Control with Value Type Dependency |
|FMUP_INV_KEY |Extension for FM Update: FI Key of Invoice |
|FMUP_PAY_KEY |Extension for FM Update: FI Key of Payment |
|FS006 |Fields for Optical Archiving |
|FTCHECK |Foreign Trade: Import Simulation - Ctrl Fields for Pricing |
|FTEXTS |Communication Structure for Additional Components |
|FTGENERAL |Foreign Trade: General Fields Item |
|FUND_STRUC |Substructure Fonds |
|FVD_TZB0A |Append to TZBOA: Loans Fields |
|GLACCOUNT_CCODE |G/L Account Master Record: Company Code |
|GLACCOUNT_CCODE_DATA |G/L Account Master Record: Company Code - Data |
|GLACCOUNT_CCODE_INFO |G/L Account Master Record: Company Code - Information |
|GLACCOUNT_CCODE_KEY |G/L Account Master Record: Company Code - Key |
|GLX_ORG_INFO |Organizational Assignment |
|GMBSEGZ |Grants Management Add-on |
|GXXLT_H |XXL interface: horizontal features |
|GXXLT_O |XXL_interface: texts for online display |
|GXXLT_S |XXL interface: structure of the semantics table |
|GXXLT_V |XXL interface: vertical features |
|HELPVAL |Restrict Value Range - Transfer Table |
|HELP_INFO |Transfer Values for the Help Processor |
|HELP_VALUE |Structure or Function Module HELP_VALUE_GET_FOR_TABLE |
|HHM_COBL |Include for COBL from FM |
|IADDR_PSO |Local Authority Additional Fields (Address) |
|IBKPF_PSO |IS-PS: Include Structure BKPF Payment Request Doc.Header |
|ICDIND |Structures for generating change document update programs |
|ICON |Icons table |
|ICONS |Icons |
|ICURR |Interface for Currency Translation -
V V URGENT Report for Vendor Aging
Hi ABAP Gurus,
I have to develop a report for VENDOR AGING. My requirement is i have to post an invoice. From Payment terms i have to get Dependent on posting date. Let us assume if payment term is 100 by adding posting date + payment term (100) i have to get due date. I'am giving I/P terms as Company code & Period. If i enter company code i have to get O/P as vendor name(lfa1-name1),vendor no(bsik-lifnr),bill no(bsik-xblnr),bill date(bsik-bldat) i.e., baseline date,amount(bsik-dmbtr) and duedate (this i have to pick from payment terms). For period i have to get O/P as 1st week bucket,2nd week bucket,3rd week bucket,4th week bucket and beyond. For this you have to take the difference b/n due date and that buckets based on this result you have to put that amount of rupees whether it is going to pay in 1st week r 2nd r 3rd r 4th or beyond this. If that due date is less than or equal to 1st week it has to come and fall in 1st week. THIS IS MY REQUIREMENT.
For this i'am using tables BSIK,LFA1.
Can any body send me the code on this. For this my delivery date is on monday.
Please help me on this it's very Urgent...
I will REWARD you the points definitely for those who help me on this.
my mail id : [email protected]
waiting for your VALUABLE REPLIES. Please intimate me if you send it to my mail.
Thanks and Regards,
Sundeep.Hi
See the report code and modify as per your requirements
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
Reward points if useful
Regards
Anji -
Letter of Credit for Vendor Payments
Hi All,
We are implementing ECC 6.0 Version.
The client requirement is to create Letter of Credit for Vendors and to capture data relating issue of Letter of Credit, Terms of Payment and Expirition Date. Against a Single Letter of Credit issued to a vendor client may receive more than one Invoice till the Expiry period of the Letter of Credit and Value. Further, client may also amend the Old Letter of Credit by extending the validity period or the value of the LC.
I know that we can create letter of credit through Special GL indicator 'L'. But it is one Letter of Credit to One invoice for clearing. How to map one letter of credit to multiple invoices and how we can capture expirition date of LC.
Further same vendor can have multiple LC opened against them for different projects. Please let me know detailed configuration steps.
Best Regards,
Bhargav.
Edited by: Bhargava Ram on Oct 3, 2008 3:40 PMHi,
Sorry i guess my question is not clear. It is not to link any LC with PO
The client will raise a single LC against any import vendor. Since these are large CAPEX related purchases, the vendor will send multiple invoices. The bank will adjust the LC against the invoices. Post adjustment the bank will send th advice to the company.
My question was how we can adjust multiple invoices against a single LC
THanks
Sembian -
Printing confirmation of balance for vendors and customer-urgent
Hi,
Thanx Vamsi for the reply.
I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
Kindly advise.
Thanks in advance
Regards
KarpagamHi,
We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
My query is can we bring even the cleared items alongwith the open items in the same print program???
Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
Please reply ASAP as it is very urgent.
Thanks in advance.
Regards
Karpagam -
Upload program for vendor master
Hi Friends,
Could you please help me in this.
actually i have a program like this:
i have to download the data from an excel sheet and reformat it and output into a text file so that the data can be uploaded into vendor master using standard progarm
<b>"RFBIKR00".</b>
i have written the program like this:
but in the middle when formatting the data...i'm facing the problem....
plz help me in solving that...
thnx very very much...........
the program i wrote is like this:
<b>
tables: lfa1,
lfb1,
lfm1,
lfbk,
bnka,
bgr00,
blf00,
blfa1,
blfb1,
blfbk,
blfm1,
blfb5,
blfbw,
blfei,
blfza,
blflr,
blfm2,
bwyt3,
bwyt1,
blfat.
*--- Internal table for spread sheet.
data: t_filedata like alsmex_tabline occurs 0 with header line.
*--- Internal table for Vendor Master Data in Spread Sheet.
data: begin of t_sheet occurs 0,
name1 like lfa1-name1, "vendor name1
name2 like lfa1-name2, "vendor name2
altkn like lfb1-altkn, "previous master record number
bukrs like lfb1-bukrs, "company code
ekorg like lfm1-ekorg, "purchase organization
ktokk like lfa1-ktokk, "account group
stras like lfa1-stras, "street
street4 like lfa1-name4, "street4
pfach like lfa1-pfach, "po box
ort01 like lfa1-ort01, "city
regio like lfa1-regio, "region
pstlz like lfa1-pstlz, "postal code
land1 like lfa1-land1, "country
telf1 like lfa1-telf1, "first telephone number
telfx like lfa1-telfx, "first fax number
stcd1 like lfa1-stcd1, "fed tax ID#
brsch like lfa1-brsch, "commodity code
akont like lfb1-akont, "reconciliation account
mindk like lfb1-mindk, "monitory indicator
zwels like lfb1-zwels, "payment method
reprf like lfb1-reprf, "check double invoice
banka like bnka-banka, "bank name
stret like bnka-stras, "house number and street
city like bnka-ort01, "city
provz like bnka-provz, "bank state
banks like lfbk-banks, "bank country
swift like bnka-swift, "swift code
bankl like lfbk-bankl, "aba#
bankn like lfbk-bankn, "bank account no
zterm like lfb1-zterm, "payment terms
terms like lfm1-zterm, "terms of payment key
end of t_sheet.
*--- Internal table for Vendor Master data in Text File.
data: begin of t_file occurs 0,
s_session type bgr00,
s_header type blf00,
s_blfa1 type blfa1,
s_blfb1 type blfb1,
s_blfbk type blfbk,
s_blfm1 type blfm1,
s_blfbk type blfbk,
s_blfb5 type blfb5,
s_blfza type blfza,
s_blfm1 type blfm1,
s_blfat type blfat,
s_bwyt1 type bwyt1,
s_bwyt3 type bwyt3,
s_blfm2 type blfm2,
s_blfei type blfei1,
s_blfbw type blfbw,
s_blflr type blflr,
end of t_file.
SELECTION SCREEN *****
*---Selection Parameters.
selection-screen begin of block b1 with frame title title1.
parameters: p_xlfile like rlgrap-filename.
parameters: p_txfile type rlgrap-filename.
selection-screen end of block b1.
INITIALIZATION *****
initialization.
*---Initialize text fields for selection-screen.
title1 = 'Selection Parameters'.
AT SELECTION-SCREEN *****
at selection-screen.
at selection-screen on p_xlfile.
perform check_file using p_xlfile.
at selection-screen on value-request for p_xlfile.
perform select_file using p_xlfile.
START-OF-SELECTION *****
start-of-selection.
clear t_sheet.
refresh t_sheet.
*---Upload Spreadsheet.
perform read_file using p_xlfile.
*---Process data into formatted internal table.
perform format_data.
append t_file.
clear t_file.
endloop.
*---Download data to Text file.
perform download_data.
TOP-OF-PAGE *****
top-of-page.
perform top_of_page.
S-U-B-R-O-U-T-I-N-E-S *****
Form TOP_OF_PAGE
Calling the Standard Report Header
form top_of_page.
perform header using 'CREATE FILE FOR'
'VENDOR MASTER UPLOAD'
132.
skip 2.
endform. "TOP_OF_PAGE
Form check_file **
Checking the File entered **
data: p_filename type string.
form check_file using p_filename.
*---The entered File must be Excel spreadsheet.
data: l_length type i,
l_ext(4) type c.
l_length = strlen( p_xlfile ).
subtract 4 from l_length.
l_ext = p_xlfile+l_length(4).
translate l_ext to upper case.
if l_ext <> '.XLS'.
message e009 with 'Only Excel spreadsheets are supported'.
endif.
*---Check if File exits and not empty.
data: l_return(10) type c.
CALL FUNCTION 'WS_QUERY'
EXPORTING
FILENAME = p_filename
QUERY = 'FL'
IMPORTING
RETURN = l_return
EXCEPTIONS
INV_QUERY = 1
NO_BATCH = 2
FRONTEND_ERROR = 3
OTHERS = 4
IF l_return = space or l_return = '0'.
message e530(pj) with p_filename.
ENDIF.
endform. "CHECK_FILE
Form select_file **
form select_file using p_filename like rlgrap-filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ',MS Excel (.xls),.xls.'
CHANGING
FILE_NAME = p_filename
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE e838(29) with p_filename.
ENDIF.
endform. "SELECT_FILE
Form read_file **
form read_file using p_filename like rlgrap-filename.
*---Display status message for User.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = 'Uploading Spreadsheet'
*---Upload spreadsheet.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = p_filename
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 256
I_END_ROW = 65536
TABLES
INTERN = t_filedata
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF t_filedata[] is initial.
message i009 with 'NO DATA FOUND IN FILE' p_filename.
stop.
ENDIF.
sort t_filedata by row col.
endform. "READ_FILE
Form format_data **
form format_data.
data: l_index type i.
field-symbols: <fs1>.
*---Display status message for user.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = ' Processing Data...'
loop at t_filedata.
l_index = t_filedata-col.
assign component l_index of structure t_sheet to <fs1>.
<fs1> = t_filedata-value.
at end of row.
append t_sheet.
clear t_sheet.
endat.
endloop.
refresh t_filedata.
free t_filedata.
endform. "FORMAT_DATA
Form download_data.
form download_data.
OPEN DATASET p_txfile for OUTPUT.
LOOP at t_file.
TRANSFER t_file to p_txfile.
ENDLOOP.
CLOSE DATASET p_txfile.
IF SY-SUBRC = 0.
WRITE: / 'Excel to Textfile for Vendor Master Upload: ', P_TXFILE.
ENDIF.
endform. "DOWNLOAD_DATA</b>Hi!
You don't need to program the 'translation' from a file into input data for RFBIKR00 yourself. SAP has done this, so that you can do this (nearly) without programming. If you need some special conversion rules, then you can add some coding, but most is possible without.
Have a look at transaction LSMW. It's not so complicated it looks at the first time. Just look at <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm">help</a> for the way to use LSMW.
Regards,
Christian
P.S.: sorry for lost your efforts, but you should switch to LSMW
Maybe you are looking for
-
The best webcam for the Mac Pro?
I have a 23 inch desktop and frankly, I'm upset at the iSight not being made anymore and the people making serious bank off it on ebay and amazon. I tried the agent webcam by liquid digital which is a company in australia, http://agent.liquiddigital.
-
Exception in ESB Header Functions (ehdr:getRequestHeader)
Hi, I was working on the context based routing in the ESB. My scenario is a simple File to File scenario where I want to make some changes in the Filter Expressions in the Routing service part. I want to include the Header functions in order to route
-
Hey Guys, I have a X58 Pro motherboard that's currently clocked at 3.95ghz. I'm real happy with the performance so far, compared to my GA-EX58-UD3R, but I'd like to push it a little farther. As the heading states, I'm stalled at 3.95ghz. If someone
-
I got an iPad mini over Christmas and have had no issues setting up/managing my email until yesterday. I've had my Exchange email working for almost a month, and yesterday I stopped getting emails and getting the error: "Cannot Get Mail. The connecti
-
Error with DataSource with MSSQL jdbc driver
i have put the drivers of mssql in: <domain_config_dir>/domain1/server1/lib/my server.xml look like this: <jdbc-resource enabled="true" pool-name="CohispaniaPool" jndi-name="jdbc/cohispania"/> <jdbc-connection-pool steady-pool-size="8" max-po