Clearing network cache worked; ONCE. This is ONLY on facebook. Two users on computer (win 7 Prof), same browswer, both use Facebook. Different results. Why would clearing cache work once??
Windows 7 professional. Firefox 6.02
Only on Facebook.
Yet 2 users on computer and 2 different results. I have already uploaded a screen shot. I see more and more users are reporting this, but many more are probably not.
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt
Similar Messages
-
i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?
Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using. -
How to grant LOGON ONLY Rights to two users (no domain admins) on Domain Controllers
Dear Techies,
I wish to grant LOGON ONLY Rights to two users, who are not the members of Domain Admins, on Domain Controllers.
Can someone please suggest the best and easiest possible way to do this keeping up with Compliance?
Regards
Amit KumarI think it is by design, the readers don't have access to the operations and application management section. If you look at the URL's you will notice they are of the form http://servername:portnumber/_admin/operations.aspx and http://servername:portnumber/_admin/applications.aspx. Giving read only access to these pages means, they will be not able to modify the settings on these pages.
Looks like it is not possible to give read only access.
Thanks,
Prashanth -
When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.
Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running Mac OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of Mac OS X, select Go ▹ Go to Folder… from the Finder menu bar and enter “~/Library” (without the quotes) in the text box that opens.
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test. -
How often syncs Firefox sync with the server were my bookmarks are storaged? Can I turn of the historical sync because one computer is at home and the other is at work. So I use totally different webpages and would like to have the history disabled.
OK, I found the part about history. It is just to unmark that.
But still i wonder how often it sync? Instantly? Or when closing FF? -
My Iphone 4 won't charge. I began noticing it yesterday but I ignored it. Now the phone is dead. I've had it plugged up to my computer all day and it says that it is charging but hasn't cut on yet. I've used many different chargers and none of them work.
If the same when using the included power adaptor, there may be a hardware problem with the battery. Make an appointment at an Apple Store if there is one nearby.
-
One computer at COMPANY-A is attempting to communicate with two
computers located at COMPANY-B, via an IPsec tunnel between the
two companies.
All communications are via TCP protocol.
All devices present public IP addresses to one another, although they
may have RFC 1918 addresses on other interfaces, and NAT may be in use
on the COMPANY-B side. (NAT is not being used on the COMPANY-A side.)
The players:(Note: first three octets have been changed for security reasons)
COMPANY-A computer 1.2.3.161
COMPANY-A router 1.2.3.8 (also IPsec peer)
COMPANY-A has 1.2.3.0/24 with no subnetting.
COMPANY-B router 4.5.6.228 (also IPsec peer)
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
COMPANY-B has 4.5.6.0/23 subnetted in various ways.
COMPANY-B also has 9.10.11.0/24, but it is not involved in the issue.
What works:
The COMPANY-A computer 1.2.3.161 can communicate via the single IPsec
tunnel to COMPANY-B computer #1 4.5.7.94 without problems.
The "show crypto session detail" command shows Inbound/Outbound packets
flowing in the dec'ed and enc'ed positions.
What doesn't:
When the COMPANY-A computer 1.2.3.161 attempts to communicate
via the single IPsec tunnel with the COMPANY-B computer #2 4.5.7.29,
the COMPANY-A router eventually reports five of these messages:
Oct 9 15:24:54.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:24:57.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:03.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:15.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:39.329: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:26:27.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
and the "show crypto session detail" shows inbound packets being dropped.
The COMPANY-A computer that opens the TCP connection never gets past the
SYN_SENT phase of the TCP connection whan trying to communicate with the
COMPANY-B computer #2, and the repeated error messages are the retries of
the SYN packet.
On the COMPANY-A side, this IPsec configuration has been set up on a 3745,
a 3725, and some 76xx routers were tried, all with similar behavior,
with packets from one far-end computer passing fine, and packets from
another far-end computer in the same netblock passing through the same
IPsec tunnel failing with the "failed SA identity" error.
The COMPANY-A computer directs all packets headed to COMPANY-B via the
COMPANY-A router at 1.2.3.8 with this set of route settings:
netstat -r -n
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
4.5.7.0 1.2.3.8 255.255.255.0 UG 0 0 0 eth3
1.2.3.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
10.1.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3
10.0.0.0 10.1.1.1 255.0.0.0 UG 0 0 0 eth0
0.0.0.0 1.2.3.1 0.0.0.0 UG 0 0 0 eth3
The first route line shown is selected for access to both COMPANY-B computers.
The COMPANY-A router (IPsec tunnel endpoint, 1.2.3.8) has this
configuration:
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key XXXXXXXXXXXXXXXXXXXXXXX address 4.5.6.228
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set COMPANY-B01 esp-3des esp-sha-hmac
crypto map COMPANY-BMAP1 10 ipsec-isakmp
description COMPANY-B VPN
set peer 4.5.6.228
set transform-set COMPANY-B01
set pfs group2
match address 190
interface FastEthernet0/0
ip address 1.2.3.8 255.255.255.0
no ip redirects
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
crypto map COMPANY-BMAP1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.2.3.1
ip route 10.0.0.0 255.0.0.0 10.1.1.1
ip route 1.2.3.8.0 255.255.255.0 FastEthernet0/0
access-list 190 permit ip host 1.2.3.161 4.5.7.0 0.0.0.255
access-list 190 permit ip host 1.2.3.161 9.10.11.0 0.0.0.255
bridge 1 protocol ieee
One of the routers tried had this IOS/hardware configuration:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(25c),
RELEASE SOFTWARE (fc2)
isco 3725 (R7000) processor (revision 0.1) with 115712K/15360K bytes of memory.
Processor board ID XXXXXXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
4 ATM interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31296K bytes of ATA System CompactFlash (Read/Write)
250368K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
#show crypto sess
Crypto session current status
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:06:26:27
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 651 drop 16 life (KB/Sec) 4496182/23178
Outbound: #pkts enc'ed 574 drop 2 life (KB/Sec) 4496279/23178
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
The COMPANY-B device on their end of the IPsec VPN is a Juniper SSG1000
Version 6.1 (ScreenOS)
We only have a limited view into the Juniper device configuration.
What we were allowed to see was:
COMPANY-B-ROUTER(M)-> sh config | incl COMPANY-A
set address "Untrust" "oss-COMPANY-A-1.2.3.161" 1.2.3.161 255.255.255.255
set ike gateway "COMPANY-A-1-GW" address 1.2.3.8 Main outgoing-interface "ethernet2/1" preshare xxxxxxxxxxxxxxxxxxxxxx proposal "pre-g2-3des-sha"
set vpn "COMPANY-A-1-IKE" gateway "COMPANY-A-1-GW" no-replay tunnel idletime 0 proposal "g2-esp-3des-sha-28800"
set policy id 2539 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "9.10.11.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2500
set policy id 2500 from "Trust" to "Untrust" "9.10.11.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2539
set policy id 2541 from "Trust" to "Untrust" "4.5.7.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2540
set policy id 2540 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "4.5.7.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2541
COMPANY-B-ROUTER(M)->
I suspect that this curious issue is due to a configuration setting on the
Juniper device, but neither party has seen this error before. COMPANY-B
operates thousands of IPsec VPNs and they report that this is a new error
for them too. The behavior that allows traffic from one IP address to
work and traffic from another to end up getting this error is also unique.
As only the Cisco side emits any error message at all, this is the only
clue we have as to what is going on, even if this isn't actually an IOS
problem.
What we are looking for is a description of exactly what the Cisco
IOS error message:
IPSEC(epa_des_crypt): decrypted packet failed SA identity check
is complaining about, and if there are any known causes of the behavior
described that occur when running IPsec between Cisco IOS and a Juniper
SSG device. Google reports many other incidents of the same error
message (but not the "I like that IP address but hate this one" behavior),
and not just with a Juniper device on the COMPANY-B end, but for those cases,
not one was found where the solution was described.
It is hoped that with a better explanation of the error message
and any known issues with Juniper configuration settings causing
this error, we can have COMPANY-B make adjustments to their device.
Or, if there is a setting change needed on the COMPANY-A router,
that can also be implemented.
Thanks in advance for your time in reading this, and any ideas.Hello Harish,
It is believed that:
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
both have at least two network interfaces, one with a public IP address
(which we are supposedly conversing with) and one with a RFC 1918 type
address. COMPANY-B is reluctant to disclose details of their network or
servers setup, so this is not 100% certain.
Because of that uncertainty, it occurred to me that perhaps COMPANY-B
computer #2 might be incorrectly routing via the RFC 1918 interface.
In theory, such packets should have been blocked by the access-list on both
COMPANY-A router, and should not have even made it into the IPsec VPN
if the Juniper access settings work as it appears they should. So I turned up
debugging on COMPANY-A router so that I could see the encrypted and
decrypted packet hex dumps.
I then hand-disassembled the decoded ACK packet IP header received just
prior to the "decrypted packet failed SA check" error being emitted and
found the expected source and destination IP addresses (4.5.7.29 and 1.2.3.161),
in the unecapsulated packet. I also found the expected port numbers of the TCP
conversation that was trying to be established in the TCP header. So, it
looks like COMPANY-B computer #2 is emitting the packets out the right
interface.
The IP packet header of the encrypted packet showed the IP addresses of the
two routers at each terminus of the IPsec VPN, but since I don't know what triggers
the "SA check" error message or what it is complaining about, I don't know what
other clues to look for in the packet dumps.
As to your second question, "can you check whether both encapsulation and
decapsulation happening in 'show crypto ipsec sa'", the enc'ed/dec'ed
counters were both going up by the correct quantities. When communicating
with the uncooperative COMPANY-B computer #2, you would also see the
received Drop increment for each packet decrypted. When communicating
with the working COMPANY-B computer #1, the Drop counters would not
increment, and the enc'ed/dec'ed would both increment.
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:54
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 5 life (KB/Sec) 4458308/28784
Outbound: #pkts enc'ed 401 drop 3 life (KB/Sec) 4458308/28784
Attempt a TCP communication to COMPANY-B computer #2...
show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:23
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 6 life (KB/Sec) 4458307/28753
Outbound: #pkts enc'ed 402 drop 3 life (KB/Sec) 4458307/28753
Note Inbound "drop" changed from 5 to 6. (I didn't let it sit for all
the retries.)
#show crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: COMPANY-BMAP1, local addr 1.2.3.8
protected vrf: (none)
local ident (addr/mask/prot/port): (1.2.3.161/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (4.5.7.0/255.255.255.0/0/0)
current_peer 4.5.6.228 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 402, #pkts encrypt: 402, #pkts digest: 402
#pkts decaps: 376, #pkts decrypt: 376, #pkts verify: 376
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 3, #recv errors 6
local crypto endpt.: 1.2.3.8, remote crypto endpt.: 4.5.6.228
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0xDF2CC59C(3744253340)
inbound esp sas:
spi: 0xD9D2EBBB(3654478779)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2004, flow_id: SW:4, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0xDF2CC59C(3744253340)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2003, flow_id: SW:3, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:
The "send" errors appear to be related to the tunnel reverting to a
DOWN state after periods of inactivity, and you appear to get one
each time the tunnel has to be re-negotiated and returned to
an ACTIVE state. There is no relationship between Send errors
incrementing and working/non-working TCP conversations to the
two COMPANY-B servers.
Thanks for pondering this very odd behavior. -
My Browser search has been Hijacked, How do I get rid of this. It does not do this in IE. Please help cause I do not want to use IE unless I have to.
I have tried different anti virus programs but its still here.
MichaelInstall, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
SuperAntispyware - [http://www.superantispyware.com/] <br />
AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
Also, if you have a search engine re-direct problem, see this:<br />
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
[http://www.spywarewarrior.com/index.php] <br />
[http://forum.aumha.org/] <br />
[http://www.spywareinfoforum.com/] <br />
[http://bleepingcomputer.com] -
When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X."
I've run the software update several times. Pages is located in my iWork '09 folder in Applications. Using OS X 10.6.8Delete and reinstall it.
(104030) -
Why would my iPhone work perfectly fine but when it gets to 48% it randomly shuts off?
Why would my iPhone randomly shut off at 48%? Then say its at 1%. The only way I can use it is if it ha more than 48% battery
This is usually the feature of faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing. If there is Warranty or AppleCare this will be covered.
-
I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: ST31000528ASQ
Revision: AP24
Serial Number: 6V***5JR
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 7200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
<Edited By Host>If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case. -
I am doing two calendars. In one I am able to load 7 pictures, but in the other I am only aloud to load 5, My settings are set exactly the same for both.
Any ideas?What happens when you try to load the photos into the second calendar? What iPhoto version? What system version?
OT -
Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Is there a "real fix" to get iMessage and FaceTime working? Tried the 8.8.8.8 and time,rest thing. Passwords and Apple ID are ok. At log in the message says it's a network connection.
Any ideas? Is here a fix coming from Apple?Apps are on my iPad and worked fine with iOS 6. When iOS7 was loaded, I can no longer sign in to these two apps using my Apple ID. These apps are on my phone and work fine. This problem is on on my iPad.
Maybe you are looking for
-
LP Cover Art Shows Up In iTunes, Not Always On Apple TV
When I started using Apple TV on Sunday I realized that some of my fave LP's have low-res LP art which looks awful on the LCD HDTV. So I went into iTunes, highlighted the 12 songs on "Rubber Soul", right clicked for "get info", checked the box for "a
-
Error in BDC while running in NO screen mode
Hello All, I am creating material using BDC. I need to capture errors those occure during creation of material. i need to place these errors in client desktop. When I run the BDC in ALL Screen mode all types of errors are getting captured correctly a
-
Does anyone have an issue with the adobe files jumping around?
I recently purchased a new Mac Pro running Mountain Lion and installed the latest CS6 upgrade. I've been working with with for a few weeks and notice that while I'm in adobe files (mostely InDesign) the pages will jump around or scroll without prompt
-
will photos in my folder called photostream on a windows computer remain there or do they go away in 30 days if i dont save them to another windows folde?
-
OS X Mountain Lion Battery Life Issue
I bought a new MacBook Air 13" about a month ago. It has 4GB Memory, Intel Core i5 processor, and a 256GB SSD. The first three weeks I had it (before OS X Mountain Lion was released) it was running OS X Lion and was giving me about 9hrs (using just i