Clearing of open items- inter company transfer

Dear All,
I made some intercompany postings for vendor open items. When i am clearing the open items (receiver company code) of vendor through F-53 system says " No open items found". But through FBL1N i can see these as open items.
Thanks in advance
Regards,
Sankar

Hi madhu,
      OBYA - i already settings for inter company code postings. I already made that and make posting also.
Now the problem, i transfered open item of vendor(1) of 100(Dr) from sender company code(1234) to receiver company code(ABCD) to the vendor(2) 100(Dr).
   when i did this transfer sender company open item nulified and the same open item transfer to the receiver company code with open item status.
   Now i book one bill on vendor(2) receiver company code (ABCD) for 100(Cr). Now when i am clearing debit amount with credit amount through F-44 system generating a message that "open item not found"
   i choose document number in additional selections.
Regards,
Sankar

Similar Messages

Automatically clear the open items for a GL account cross company codes

Hi FICO experts,
Can anyone help me on the following issue urgently?
There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
The example is below:
Journal in company code A
Dr. 840410      $100
Cr. 111300       $100
Journal in company code B
Dr. 111301   $100
Cr. 840410      $100
Now I want to automatically clear account 840410 by using assignment or text in the journal entry.
It will be highly appreciated for any instructions.
Adele

Hello Adele Wang,
You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
You need to make the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
Hope I had been able to help you. Please assign points.
Rgds
manish
Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
See also:

Clearing vendor open items

Dear all,
I need to clear all open vendor items posted before 2008 and post the difference to a P/L account.
Is there a way to do that automatically?
Thanks
Claudia.

Hi Claudia,
You can use F.13 for your requirement. However this transaction will work if the Vendor accounts are configured for automatic clearing.
IMG path for configuration for F.13 is :
Financial accounting>Accounts Receivable and Accounts Payable>Business Transactions-> Open Item clearing->Prepare automatic clearing
On this transaction specify the account type K (for Vendors), give the Vendor account Number range and specify the criteria to be used for clearing. i.e. the fields to be used for clearing eg. ZUONR, VBUND etc. You can specify multiple criteria and the sytem will process automatic clearing based on these criteria.
The F.13 can automatically clear all open items based on criteria specified in IMG.
It also give a list of documents that cannot be cleared.
Once you have run F.13, you can pass manual Journal entries to transfer the difference or Vendor balance to a P&L account.
Suggested selection Criteria on F.13:
General Selection
Enter Company code, Fiscal year and Posting dates.
Check the Select Vendors check box. you can enter a range of Vendor Numbers. If you leave the range blank, all Vendors configured in IMG setting above will be selected.
Posting Period
Enter clearing date
Check the Test Run checkbox
Output Controls
Check all check boxex i.e. Documents that can be cleared, documents that cannot be cleared and Error messages.
Hope this helps.
Thanks,
Uma

Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

Clear vendor open items

Hi Gurus,
I'm archiving FI vendor and customer documents for a company that is not more used in the system. But I need to clear all open items that I can see in FBL1N (and FBL5N).
Does someone knows if there is a way to clear ALL vendor/customer open items? Pratically I need a FB05 that can be use for lots of vendors/customers.
Have you got any ideas?
Thanks,
Marco
Message was edited by:
Marco Vismara

Hi Marco,
This is a topic which is often discussed. As I know, there is no way to 'mass' close the open items.
You could explore the possibility of disabling the Open Item Management for the acconts for that comapany, if the accounts are not being used by other companies.
Hope this helps,
Naveen

Document is getting posted but unalble to clear the open items

hi gurus,
i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

EBS posting to clear customer open items - Function not working?

Hello SAPers
I have an issue I just canu2019t seem to resolve! We are receiving MT940 statements and receive customer invoice reference details with field: 86 as follows:
:61:090910C1500,00FOSB1000270 //100909050      0        035315
:86:DEPOSIT
Remitter:1000270 MISSION AUSTRALIA   Ref:1200000017
Immediately following the BTC FOSB the bank quotes the customer number however I am not using this as standard SAP should identify the customer by document number within the note to payee field?
I am using a 2 step process in posting to the clearing account and customer. Config as follows:
Pst Type 1
40     Bank
50     Clearing
Pst type 2
40     Clearing
15     BLANK          DZ     3      15
I have also set up a string to look for the documents ^(12########)$. When we load the statement the first posting is successful however the second does not post to the customer or clear based on the invoice reference. I am using algorithm 020. The error that occurs is F5 102 Customer does not exist in company code xxxx. It actually does exist in the company code.
I have loaded the EBS to the buffer and simulated the search on BELNR and it picks up the document?
I am sure this is standard and a CMOD is not required on this type of functionality? What have I not done to allow posting to the customer based on document number or to post on account where it is not cleared?
Any assistance on this issue is appreciated? Thanks in advance.

Function Module for GL open Items
how to clear customer open items by another customer open item
Function Module for GL Open Items
Reward points..

How to clear customer open items by another customer open item

Hi Guru's
I have a problem, we need to assign and clear the open items of one customer with another customer from same company code. is it possible?
for eg: I have a customer X whose Debit balance is USD1000 and Cusomer Y is having Credit balance is 1000. Customer Y is agreed to settle the amount to customer X.
since customers are not related , we dont maintain any relationship in SAP. how do we post and clear the open items?
please let me know the procedure.
regs
kumar

Hi,
When the moment you finish choose open item for 1st customer and then you have to press F7 (Charge off diff.) new screen comes then press F6 (Choose Open Items), then enter required data for 2nd customer (such as customer code, doc number, etc). You can post partially, and residually for this clearing posting.
Good luck.
-dwih-

Clearing customer open items

Hello!
Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
With all the best,
Merlin

Hello,
IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
Give your chart of Accounts
1. Create your account symbols
Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
2. Assigning Accounts to Account Symbols
Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
3. Create Posting Rules
Create freely definable posting rules.
4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
a) For all the payments you need to create the entries for posting area 1
b) For all the receipt you need to create the entries for posting area 1 and 2
c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
d) If you want just only entries to be posted use posting type 1.
e) If you want to clear the check, then use the posting type 4.
f) Configure according to the entries to be posted.
g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
5. Create Transaction Type
Create freely definable Transaction Type
Select the transaction type and assign the external transactions to your posting rules.
For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
6. Assign Bank Accounts to Transaction Types:
You need enter the Bank Key / Bank Account / Transaction type here.
You can get the the bank key and bank account details from table T012K (Go to SE16)
Further supplementary notes may be useful to you:
There are different programs to upload electronic bank statement.
FF.5 or FF_5.
I think your case Multicash format you are using.
You need have three files in FF.5 and two files in FF_5
You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
1. Take all the external codes list from bank.
2. Take any available documentation from the Bank describing the relevance of the external codes.
3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
4. Based on this decide the Account Symbols that are required to be created.
5. Make sure that the masking rules are configured properly.
6. Decide the posting rules that needs to be created.
7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
6. Concentrate on the posting areas to be posted while uploading the bank statement.
Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
Vendor Account Dr
To Bank Sub Account
The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
Bank Sub Account Dr
To Bank Main Account
It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
The entries would system itself pass is:
Bank Main Account Dr
To Bank Sub Account
Bank Sub Account Dr
To Cutomer account.
Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
Ideally you will use
FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
GO THROUGH SAP NOTE 48854
Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
Though this note is in relevant to GB specific, you will find this very useful.
description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
1. '00': There is no processing. The entry line is ignored.
2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
3. '02': Transfer of the ending balance to the electronic bank statement
4. '03': Transfer of the opening balance to the electronic bank statement
5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
Note
To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
62 SAPBACS + GB63 000 5
7. '06': Bank costs or interest revenues
Recommended interpretation algorithm: '000 - No interpretation'
8. '07': Total amount of cash disbursements
9. '08': Total amount of cash receipts
10. '09': Items not paid
Recommended interpretation algorithm: '000 - No interpretation'
Regards,
Ravi

Foreign Currency Valuation - GL at the time of clearing of open items

Hi experts,
We valuate the open items (Balance sheet items) in Company Code Currency without checking the reversal option.
At the time of clearing of these open items, the GL used for reversal of the valuation difference is been different.
GL mapped in OBA1:
Exch.rate diff realized
Loss/Gain: 716000
Valuation: Loss/Gain - 716001
Bal.Adj 1: 101699
Translation:
Loss/Gain: 716000
Bal.sheet adj -Loss/Gain: 716001
At the time of clearing of open items:
The entry which is getting passed for the reversal of the valuation difference is some time posted to GL: 101699 and sometime to GL 716000. The off-setting GL been Clearing GL(which is been valuated).
Could someone kindly through some light as to why the system behaving in such a way. We expect the GL at the time of reversal to be 101699.
Thanks in advance.

Hi Pradeep,
The principle of foreign currency revaluation works as follows for the open items like AR, AP and Bank Balances:
At the period end the system revaluates the open items (or balances, as the case may be) with the period end exchange rate and thus posts the difference between the original exchange rate (at the time the open item was created) and the period end rate. This could be loss or gain due to revaluation. One side of the entry is P&L (7...account) and the other side is the balance sheet (the balance sheet account typically comes from AR, AP or Bank/Cash range).
This loss or gain is not realized since at the period end the open item is still out there. When you clear the open item, the loss or gain due to the latest exchange rate is realized immediately and is posted to realized loss or gain, with an offset to the original balance sheet account.
I hope the above helps.
Sharabh

Charge off difference whening clearing customer open item with bank receipt

Hi,
Our company users will use F-32 to clear customer open item with bank receipt, sometimes, our invoice is 100 RMB issue to customer, the customer finally pay 99.98, then in F-32, we use charge off difference to post 0.02 difference to a account.
The user then want to control this, saying for example, if the customer pay only 90, whening using charge off differnce, the system will pop up a error message.
Can this be done in SAP, or we need to use user exit, then which user exit?
Thanks.

Dear,
This is done through customer tolerance group using transaction OBA3. Here enter the maximum amount in Loss under the Permitted Payment Differences. you are able to hold tolerance for customer clearing.
Is this what you wanted?
Regards,
Chintan Joshi.

F-53 manual clearing vendor Open Items

Please help me,
When i saw vendor open items in fbl1n sys gives open items, i will try to clear that open items (F_53) sys gives message there is no open items,
Regards,
TML

Hi Swati,
The openitems which is showing in vendor account might be the spl gl transactions like advance payment, which are not cleared so far, go to F-44 and clear that spl items.
hope it helps you,
Regards,
kishore

How to clear vendor open items with customer open items in APP?

Hi Experts,
Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'. Still problem is not solved, hence I am requesting you to help me in this regard.
Thank you very much,
Regards,
Ganesh.

Hi
In FBCJ after payment you have clear manually vendor balance in F-44.
If you want SPL GL in FBCJ then write a Substitution .
1. step 001 - Special G/L Substitution
2. Prerequisite - Transaction code = 'FBCJ'
3. Substitution posting key -- Exit (need help from abap) exit name
G/L Exit (need help from abap) exit name
Special G/L Ind Exit (need help from abap) exit name
you can't do this without ABAP help
Best Of Luck
Tanmoy

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

Clearing Vendor Open items at T.Code. F-44

I m getting a message "Enter Doc number from number range 01 for year 2010" (msg no.F5223) while trying to clear vendor open items at T. Code (F-44) when I give the account no and try to save it or process open items by clicking the "Process Tab". Any suggestions to resolve it will be greatly appriciated.

Hi,
You must have maintained the number range object 01 to your clearing do c type AB.
In order to do clearing, you must have the number range assigned to that 01 object for fiscal year 2010 in FBN1.
Thanks,
Srinu

Clearing of open items- inter company transfer

Similar Messages

Maybe you are looking for