Clearing old alerts

Oem grid is generating alerts . Even long after the problem is resolved the alerts are not cleared . These alerts are for space on filesystem / archiv destiantion full .
we are using gird 10.2.0.3.0 version .
Any help would be appericated
Thanks
Narendra

These alerts should clear after you have resolved the space issue so the space left is within your set thresholds.
If you are sure this is the case, stop the agent, issue a clearstate command and restart the agent.
does the alert clear then?
Also, what version of agents are you using?

Similar Messages

How do I clear old alerts on OEM homepage?

I am using OEM 11g. There are over 375 alerts sitting in the "Alert Triggered" section on the homepage of the OEM. Some are nearly a year old and the relying have been resolved and still have not cleared. I could go through each one and manually clear an alert, however because of hardware constraints that is a very time-consuming process that will take me several hours to handle. Is there a way to do a batch manual clear.
There is also a full tablespace alert from nearly six months ago that was addressed immediately. Datafiles were added and made auto-extensible. Yet that alert remains. How do I clear it? Christine

Hi,
Please follow the below Metalink Doc.
How To Clear Active Incidents In Enterprise Manager 11g? (Doc ID 1206403.1)
Regards
Krishnan

How do I clear old alerts?

Hi,
On my Grid Control home page, I have 311 warnings. Some of these warnings are no longer applicable and some of them are on metrics that I am no longer monitoring on. For instance, I am not interested in whether somebody has logged in to a database as the SYS user, especially not when it occurred six weeks ago!
How can I clear these alerts? Some alerts have a check box beside them, so I can check the check box and click "Clear Alert". For most of the alerts, the check box is greyed out.
Thank you for any insight on this!
Maria

Thank you for your response! I had actually made a search and come across the thread that you are referencing, but I would really like to do this through the front-end at this point, and I am amazed that there doesn't seem to be a simple way to do it! What use is the home page summary if there is so much noise!
Anyhow, I figured out a way to clear these warnings through the front-end, although not by checking a simple check box and pressing a button, that I would have preferred. I set the threshold of warning and critical to way beyond what is ever likely to happen, and set the collection schedule to once per minute. The alerts cleared. Then, I disabled the collection altogether.
Regards,
Maria

Clear Old Critical Alerts in GC

Hi,
Wondering if someone can offer a solution.
I've got some old critical alerts in a newly created OMS and repository that have been addressed and fixed that will not clear. I've tried the "clearstate" on the agent with no luck. I've got a SR open and am being told i need to change the template value and reapply - this is a ridiculous solution since I'll end up needing to do this regularly (i've been running gc since the beta release and have seen this issue ongoing in each release).
Any solutions out there to remove these old alerts?
Alex

For our environment we create groups and templates. We assign these monitoring templates to the groups.
I ended up changing the value of the monitoring criteria on the specific target that was having a problem and the alert cleared. Then changed it back. Some of the targets I had to actually remove and re-add the target as you stated.
My SR says this will be fixed in 11g...

I want to clear my alert log files

I use 10 g
and i have these options
1/Clear every open alert
2.purge every open alert
3.clear
4.clear.
which one should i use.
Please give me any other helpfull advice

Hi,
>>1/Clear every open alert
2.purge every open alert
3.clear
4.clear.
Actually i am understand what u want with these option.
>> i want to clear my alert log files
simply move to another name
like
mv alert_SID.log alert_SID.bak
oracle will automatically create new one if it will not able to find old one.
Thanks
Kuljeet

Clear the Alert list

Hi all,
How can I clear the alert list displayed in the first page of OEM 10.2?
Thanks ,
Simon

Hello together,
I'm running the older grid control: 10.1.0.3.
Have a look at the body of EM_SEVERITY:
-- PURPOSE
-- Deletes the current severity for the given target.
-- IN PARAMETERS
-- p_target_guid - target_guid for which the current severity
-- has to be deleted.
-- p_metric_guid - metric_guid for which the current severity
-- has to be deleted.
-- p_key_value - key value for which the current severity
-- has to be deleted.
-- OUT PARAMETERS
-- None.
-- ERROR CODES
-- None.
-- NOTES
-- This is private routine called only by the severity_trigger
PROCEDURE delete_current_severity(p_target_guid IN RAW,
p_metric_guid IN RAW,
p_key_value IN VARCHAR2) IS
BEGIN
DELETE FROM MGMT_CURRENT_SEVERITY
WHERE target_guid = p_target_guid
AND metric_guid = p_metric_guid
AND key_value = p_key_value;
END delete_current_severity;
this code will shurely works - but there is a trigger mentioned in the comment:
SYSMAN.SEVERITY_DELETE (after delete from MGMT_SEVERITY):
BEGIN
DELETE FROM MGMT_CURRENT_SEVERITY s
WHERE s.severity_guid = :old.severity_guid;
-- Following deletes should move to rollups when
-- we implement rollups for severities
-- Delete all annotations for this severity
DELETE FROM MGMT_SEVERITY_ANNOTATION a
WHERE a.severity_guid = :old.severity_guid;
-- Delete notification history for this severity
DELETE FROM MGMT_NOTIFICATION_LOG l
WHERE l.source_obj_type = mgmt_global.G_ANNOTATION_SOURCE_SEVERITY
AND l.source_obj_guid = :old.severity_guid;
END;
so deleting MGMT_SEVERITY seems to be the better way.
Anyone who has experience with this?
Best regards
Andreas

Old alert logs

Good Morning,
Just a quick question about the old alert logs on the home page of the oem. They have been sitting there for a while and I would like to delete them. Is there a way to go about doing this?
Thanks in advance.
regards,
al

A,
For most of the alerts in EM-GC, the main way to clear the alerts is to resolve the underlying issue. For example, if you get a filesystem utilization alert, then if you free up more space, then the next time the Agent checks the space against the thresholds, if the space used does not cross the thresholds, then the filesystem utilization alert will clear. There are also a subset of alerts (e.g. log-based alerts such as alert log) that will allow the user to manually 'clear' the alerts from the EM-GC console. If you do not care about getting alerts for the metric, then you can remove the thresholds from the metric to prevent the generation of alerts for that metric.
If You are pretty sure that the underlying cause is cleared and the alert stucked in GC Repository you may need to log a new SR it could be a bug.
Regarding Deleting the alerts manually from the repository this is very dangerous and it may has a bad impact on the consistency of the data.
also deleting the alert manually from OEM-DBconsole is completely different than Grid Control R2.
Note: OEM-DBconsole = OEM-GC R1 (Utilize The Same Repository)
Regards,
MettoMorPhisM

How to clear the alerts in Grid

Hi,
Grid version : 10.2.0.5
1)I would like to clear the alerts older than two days in grid.
We are monitoring more than 500DB's in grid.Is there any procedure to remove the alerts ?
2)How to clear or reduce the "All Targets Policy Violations" in grid.
3)How to clear or reduce the "Security Policy Violations" in grid.
Please need your help on this.
Thanks.

Open your Grid Control Console
Go to Alerts --> Warning
Select database and press go
You will see that the Clean button appear and checkbox for each warning alert that its possible manual clean you will see the checkbox to activate
The Critical Alerts can't clean manualy.
OR
1. Make a SELECT * from MGMT_CURRENT_SEVERITY and show for the TARGET_GUID, METRIC_GUID and KEY_VALUE.
2. Connect to db user SYSMAN and execute:
exec EM_SEVERITY.delete_current_severity(TARGET_GUID,METRIC_GUID,KEY_VALUE);
for example:
exec EM_SEVERITY.delete_current_severity('0DEB8E6980695B7548CF98871084AD10','F95BA0D95585002889E1ABF92B2DA7C3','SYS');
3. Wait a few minutes.
The content of the MGMT_CURRENT_SERVERITY table is displayed as ALERTS or ADDITIONAL ALERTS in EMs main menu. If you delete the ALERTS only in the MGMT_CURRENT_SEVERITY table, the alert messages appears still in some EM submenus.

Issue on BPM(Business Process Monitoring): Reorganization of old alerts

Hi BPM Folks,
Is there any way for reorganization of old alerts to clean up the system?
Because a service desk message(Ticket) is created each time when a job is cancelled. i.e, The number of tickets are created as many times of the same job is cancelled.
Is there any way to accumulate the tickets related to the same job OR not to recreate the ticket again if the same job is cancelled?
We do see an option called u201Cmax number of alerts for each message idu201D in MTE properties of tcode RZ20. Is anything to do with this?
Thanks in advance.
Regards,
Sanjai

This issue is resolved.
Resolution:
1. BPMon alerts are automatically reorganized by the BPMon engine according to the settings in the BPMon session in node "Activation", tab "Alert reoganization".
2. If we have configured 1 service desk message per 1 alert, then that's what we'll get. If we don't want fewer messages, we will have to change the thresholds for the messages in node "Notification" in the BPMon setup session.

TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

Time Macine not backing up.
As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
Any help much appreciated
Many thanks,

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

GRIR Clearing (old items)

Dear all,
could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
Sincerely,
Lucas

Hi,
It is not recommended to post manually on GR IR account.
You should try to clear this difference with MR11, it is possible to clear old items with the current date.
Rgrds,
Miroslav

Clearing an alert in OEM-GC that has a future date on, How do you delete?

Hi to all,
I have an alert that occurred regarding the count on targets on the agent and it has a future time stamp on it. I have tried to alter the alert metric so it en-compasses the amount of targets hoping that this would clear the alert and then when it had cleared reset the metric to it's original quota.
Does anyone know how to delete such alerts?
Thanks to all that can help.

Try the solution
1. Make a SELECT * from MGMT_CURRENT_SEVERITY and get the TARGET_GUID, METRIC_GUID and KEY_VALUE.
2 login as sysman to repository database
exec EM_SEVERITY.delete_current_severity(TARGET_GUID,METRIC_GUID,KEY_VALUE);
for example:
exec EM_SEVERITY.delete_current_severity('0DEB8E6980695B7548CF98871084AD10','F95BA0D95585002889E1ABF92B2DA7C3','SYS');
Regards
Click here for step by step inst to [Transportable tablespace export and import|http://www.oracleracexpert.com/2009/09/transportable-tablespace-export-and.html]
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to learn [Data Pump Export modes and interfaces|http://www.oracleracexpert.com/2009/08/data-pump-export-modes-and-interfaces.html]
http://www.oracleracexpert.com

Operations manager console shows old alerts

Hi All,
I Have this issue regularly, I am using SCOM 2007 R2 CU4. But recently this issue has become very frequent. I see more number of old alerts rather than new alerts in my SCOM console. Below is a screen shot. Is there any specific reason for this ? If
yes, How can i overcome this issue.
I checked the Health of the databases (Both Opsmanager & Ops manager warehouse database). Both are healthy they have 0 consistency errors in them. And have enough free space in them.
Below is the SQL Query what is used to check them.
For OpsmanagerDB -
DBCC CHECKDB ('Operationsmanager')
For Ops manager Data warehouse:
DBCC CHECKDB ('OperationsmanagerDW')
Ops db has 16GB Free from total of 40GB.
Warehouse DB: 56GB Free from total size of 180GB.
Gautam.75801

Hi There,
My services are Running and up. Post analysing the event logs i found that the below event is frequent on my RMS Pointing towards few of my agents and The events are also on the name of my RMS
20022
The description for Event ID 20022 from source OpsMgr Connector cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
{E6B56BC0-A270-9E8D-2738-B7238757EB67}
My SCOM Agent name
MY Management group name
{95515F4D-7E15-9FAB-5D07-E434220E5F57}
The handle is invalid
==========================
Also lot of 2115 Event logs
=======================
Also lots and lots of 29103 & 29102 Information events
The description for Event ID 29103 from source OpsMgr Config Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
My SCOM Agent name
57 35 29 C1 F3 42 12 96 AF BA 4C 84 01 4D 49 2D E2 C5 60 D2
{7a7af7a4-602c-ad7d-7d36-949bd187500a}
The handle is invalid
===================================
Event id 8000 on RMS Name its self
The description for Event ID 8000 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
CINSCOM
Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData
MY RMS FQDN
{6C3444C3-3990-BB5A-F25E-289D8F427570}
34
The handle is invalid
======================================
Event id 31551
The description for Event ID 31551 from source Health Service Modules cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
My management group name
Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange
MY RMS FQDN
{6C3444C3-3990-BB5A-F25E-289D8F427570}
InvalidOperationException
Cannot access destination table 'State.StateStage'.
The handle is invalid
======================================
Event id 5304
The description for Event ID 5304 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
95515f4d-7e15-9fab-5d07-e434220e5f57
My management group name
The handle is invalid
====================================================
Event id 5302
The description for Event ID 5302 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
95515f4d-7e15-9fab-5d07-e434220e5f57
My management group name
The handle is invalid
====================================
Event id 5500
The description for Event ID 5500 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
{95515F4D-7E15-9FAB-5D07-E434220E5F57}
72E278FE-075C-BB33-1FF4-1F5F22988F8D
5F1924C9-F4B2-BAA6-7D50-FFDC523D99BB
2014-11-21T07:57:33.0664640-05:00
2014-11-21T10:36:34.1361505-05:00
Success
Success
My SCOM Management group
My scom Agent name
The handle is invalid
===========================================================
Strange thing is that all the Above events different but the descriptions are pointing towards healthservie. Does any one have any idea what is going on in the RMS?
Gautam.75801

Clearing old emails addresses on iPhone

Is there any method to clear old or incorrect email addresses to prevent them from popping up in auto fill?

Thank you but that isn't what I meant. When I write an email on my iphone, several email address for the same person will pop up while I know only one is still good. It's no longer in my address book but continues to show up. After more investigating, I found out that prior to version 7, there isn't any way to delete old email addresses unless you reset the phone. With version 7, there is a button next to any email addresses that may pop up that are no longer relavent. If you click on the button, an option is to delete it. You can also create a contact using it if wanted. So, I appreciate your help. Maybe my research helped you out!

Cannot Clear Critical Alert for Physical Standby Databases

10.2.0.4.0 Grid Control monitoring 10.2.0.4.0 databases and standby databases with 10.2.0.4.0 agents.
The standby databases are running on Xen guests. The O/S is Red Hat 4 Advanced Server.
I had a failure of Xen guest on Saturday that caused me to have to rebuild the standby servers. EM Grid Control successfully verifies the configurations and the status is normal for both physical standby databases. (A rebuilt logical standby database shows no alerts.)
Grid Control database targets page shows a single critical alert for each physical standby database. The alert is for "number of missing media files is 4". The metric graph shows the count as 0 since before the rebuilds. I cannot clear the alerts from the Critical Alerts page. Grid Control reports "The selected alert(s) cannot be manually cleared. They will clear automatically once the metric is no longer in a critical or warning state.".
Any suggestions?
Thanks,
Ray Westphal

Thanks for the reply Anthony.
The result of the query on both standby databases is '0'. The metric graph also shows the value at '0' since before rebuilds.
And the OMS db and agents have been reset several times since I posted this.
Ray Westphal.

Clearing old alerts

Similar Messages

Maybe you are looking for