Clearing old destinations in Maps

Hello:
Any ideas how to delete previous destinations in Maps on the iphone?
4S, IOS 7.0
Thanks

That's a pity. I love Apple Maps but these are really missing features (customizing your route and having a multiple destination trip).
In my case I often organise back-to-back deliveries in remote cities. Therefore a way to identify 2 or 3 destinations and let Apple Maps suggest the optimal itinirary to deliver would be great.

Similar Messages

How can I add multiple, successive destinations in "Maps" such as on a delivery trip with several stops ?

How can I add multiple, successive destinations in"Maps" such as on a delivery trip with multiple stops and so needing driving directions i.e. set up a route ?

Maps help:
Mark a location with a pin
You can drop a pin on a location to get directions or help you find it again.
Open Maps
On your map, go to the location you want to mark with a pin.
Choose View > Drop Pin. If the pin isn’t exactly where you want it, put the pointer on it and hold down the button until the pin “hops.” Drag the pin into place, then release the button.
To see information about a location, click its pin, then click the Info button. To close the Info window, click outside of it.
To remove a pin, select it, then choose View > Clear Pin.
Get directions
Using Maps, you can get directions to help you navigate on foot or behind the wheel. Once you've decided where you're going, click the Share button to send your map and directions to your iPhone. (Your iPhone must have iOS 7 and be signed into the same iCloud account as your Mac.)
Open Maps
Do one of the following:
Click Directions to open the directions sidebar, then enter the starting and ending locations.
On the map, click a pin to display its info banner, click the info button to see more info, then choose “Get Directions.” (If your starting location doesn't have a pin, you can Control-click or tap it with two fingers, then choose Drop Pin.)
Click either the car (driving directions) or person (walking directions).
If multiple routes appear on the map, click the one you want to take.
To zoom in on a turn, click it in the directions sidebar.
To close or reopen the directions sidebar, click Directions in the toolbar.

TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

Time Macine not backing up.
As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
Any help much appreciated
Many thanks,

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

GRIR Clearing (old items)

Dear all,
could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
Sincerely,
Lucas

Hi,
It is not recommended to post manually on GR IR account.
You should try to clear this difference with MR11, it is possible to clear old items with the current date.
Rgrds,
Miroslav

Clearing old emails addresses on iPhone

Is there any method to clear old or incorrect email addresses to prevent them from popping up in auto fill?

Thank you but that isn't what I meant. When I write an email on my iphone, several email address for the same person will pop up while I know only one is still good. It's no longer in my address book but continues to show up. After more investigating, I found out that prior to version 7, there isn't any way to delete old email addresses unless you reset the phone. With version 7, there is a button next to any email addresses that may pop up that are no longer relavent. If you click on the button, an option is to delete it. You can also create a contact using it if wanted. So, I appreciate your help. Maybe my research helped you out!

"message-destination-ref-mapping" definition in EJB3.0 style annotation

Hello,
Here is how I used to define "resource-ref-mapping" and "message-destination-ref-mapping" in ejb 2.1
<resource-ref-mapping
location = "MQJMSRASubcontext/MyQCF"
name = "jms/MQConnectionFactory"/>
<message-destination-ref-mapping
location = "MQJMSRASubcontext/MQQ"
name = "jms/MQQQueueDestination"/>
I want to do define these two properties in ejb3.0 using annotation. Any help will be much appreciated.
Thanks,
Mustafa

Hello,
Here is how I used to define "resource-ref-mapping" and "message-destination-ref-mapping" in ejb 2.1
<resource-ref-mapping
location = "MQJMSRASubcontext/MyQCF"
name = "jms/MQConnectionFactory"/>
<message-destination-ref-mapping
location = "MQJMSRASubcontext/MQQ"
name = "jms/MQQQueueDestination"/>
I want to do define these two properties in ejb3.0 using annotation. Any help will be much appreciated.
Thanks,
Mustafa

Clearing Previous Destinations and History on iPhone

How do I clear previous destinations and history on iPhone 5, System 8. There's no bookmark icon on the upper right.

Hi there Nancy Blazis,
It looks like "Clear History and Website Data" has moved in iOS 8. Take a look at the article below for more information.
Safari web settings on your iPhone, iPad, or iPod touch
Clear information from your device
To clear your history and cookies from Safari in iOS 8, tap Settings > Safari > Clear History and Website Data. In iOS 7 or earlier, tap Clear History and tap Clear Cookies and Data.
To clear other stored information from Safari, tap Settings > Safari > Advanced > Website Data > Remove All Website Data.
-Griff W.

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

Please can someone explain how to retrieve deleted text, I was clearing old text when one came through at the same time so was also deleted.

Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also. My last update was iOS 8.1.2

You restore from a backup that was created after the text was received but before it was deleted.
But if you literally deleted it right after it came in, then it's not recoverable. Have the other person resend the text.

Router is not Clearing old Crypto Sessions

I am facing a stange problem on my router and its not clearing old state crypto sessions.
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
205.203.130.7   10.33.40.249    QM_IDLE           1025    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1021    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1017    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1013    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1009    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1005    0 ACTIVE
205.203.130.7   10.33.40.249    QM_IDLE           1001    0 ACTIVE
10.126.94.19    10.124.94.19    QM_IDLE           1079    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1027    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1023    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1019    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1015    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1011    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1007    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1003    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1099    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1097    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1095    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1093    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1091    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1089    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1087    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1085    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1083    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1081    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1078    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1076    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1074    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1072    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1070    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1068    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1066    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1064    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1062    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1060    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1058    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1056    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1054    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1052    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1050    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1048    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1046    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1044    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1042    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1040    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1038    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1036    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1034    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1032    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1030    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1028    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1026    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1024    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1022    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1020    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1018    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1016    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1014    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1012    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1010    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1008    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1006    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1004    0 ACTIVE
205.203.153.195 10.33.40.249    QM_IDLE           1002    0 ACTIVE

There has not been a problem like this for a while.
If you're running on older IOS version please upgrade to a MD release suitable for your router.
If you're already running something recent on this router - feel free to open a TAC case and have us investigate this thoroughly.

I need to clear old iPhone, I went to the reset option in setting. It it's asking for a password... I don't recall setting a password up and help for this? Thanks

I need to clear old iPhone, I went to the reset option in setting. It it's asking for a password... I don't recall setting a password up and help for this? Thanks

Are you sure it doesn't have iOS 7 installed? It sounds like Activation Lock is on and if that is the case, when you do Settings > General > Reset > Erase all Content & Settings, you need to enter the password for the Apple ID.

Im running out of space, how do I clear old content temp files

Im running out of space, how do I clear old content temp files old apps?
i have done the browser cache and cleared history.I am clearing items off the macbook pro but is there other areas i should clean
Thanks

Im running out of space, how do I clear old content temp files old apps?
I'm not sure exactly what you're asking. Temp files get automatically deleted when you restart. Old apps you can either uninstall (if it was originally installed with an installer, there should be an uninstaller somewhere) or drag it to the trash. What's "old content"?
i have done the browser cache and cleared history.
This is not going to give you back much space.

Outbound Queue stacking up for old destination

Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!

Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish

Clear old files out of Project Package Contents

Under project settings > Apple iOS > Package Contents are listed a ton of old files that have been removed / renamed etc. I can still check them off, but they no longer exist.
How do I clear or refresh this list? All these files at one time lived in an "assets" folder that was included in the packaging. The assets folder still exists, but many of those files have been deleted. Sadly, the FlashBuilder UI doesn't seem to want to refresh and get rid of those old items. How can I do that?
Thanks

Hey Andy,
I do not have a solution but I am having a similar problem. I opened up a project yesterday and the audio sequences were actually in pieces all out of order with large chunks missing. If someone has a solution, perhaps it will apply to both of these situations.

Any way to clear search history in maps ?

I'm new to IOS but wondering how can I clear search history in the new IOS maps application.
Thanks@

if you use internet shoping it generally needs 3D cell phone password messages for personal security. But it is saving and storing in map application search box and can not be deleted.

Clearing old destinations in Maps

Similar Messages

Maybe you are looking for