Clearing open itens in transaction F-30

Hi,
We use transaction F-30 to clear open itens. So we select each customer we want to clear.
But when we have to clear itens from several customers any time we need to do this we must fill all the customer numbers we need.
The question is: Is there a way to keep lists we use time and time again in clearing itens.
It Is possible to create lists of customers we use in transaction FBL5N but we can not use it in F-30.
      Best Regards
             João Fernandes

No, I do not think that is possible.
Cheers

Similar Messages

  • Cleared items still shows as open items in transaction FBL3N

    Dear All,
    We have an issue with respect to cleared items still shows as open items in transaction FBL3N.
    Few documents has been posted and cleared, but still those line items still shows as open items.  We had this problem only for few line items. 
    For other line items this clearing process is working properly without any issue.
    Issue:
    1. Documnet has been posted on 15.08.2209 and the same document has been cleared on 12.03.2010, but this document still shows as open item only....
    Looking forward your  response / suggestions to resolve this issue.
    Thanks in advance
    Regards,
    Prasad

    Hi Prasad,
    You have the following ways to find out the reason:-
    1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
    2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
    This is standard SAP and most probably it has got to do with dates...
    Regards,
    SAPFICO

  • Double booking when clear open item on G/L account

    HI!
    I use bank account 193200 as a clearing account to clear open items. I have made two postings on this account in different currencies. Now I wan't t o clear this items in f-03, and the difference of apprix 10 EUR is to be posted on an exchange rate difference account, 796201.  I have allocated this account to account 193300 in transaction OBY9 (account for echange rate difference) and I have also allocated this account in transaction OBXZ (create accounts for clearing differences)
    When I try to clear my twi items on account 193200 in transaction f-03 I get a posting looking like this:
    796201 Credit 10 EUR
    193200  Debet 10 EUR
    796201 Credit 10 EUR
    796201 Debet 10 EUR
    Why do I get this double posting on account 796201? It would be enough with a posting of the first two lines.
    Can anyone help?
    Many thanks in advance!

    Hi!
    Thanks for ypur reply! I checked the postings on profit centers now as you asked about it. All of the three P/L bookings (all the postings on account 796201) are on the same profit center and no bookings on profit center on account 193300.
    How can I go on? What did you mean by profit center posting in balance?

  • F-32 : Clearing Open Items

    Hi,
    There's a Z report which displays all open line items for a customer and company code. Records selected from the list are cleared using transaction F-32.
    The problem is, more than one document exist with the same document no. but in different fiscal years.
    Say, from the list, Doc X is selected for the year 2005, and Doc X exists in years 2003 and 2004 as well,Then all the 3 documents with this doc.no are selected in F-32.
    As it is, F-32 can select only based on doc.no as there is no filter based on the Fiscal year.
    I want to know if there's a method to clear customer open items based on both Doc.No and Fiscal year.
    Thanks in Advance!
    -Arthi.

    hi Arthi,
    You said that u have a Zreport which displays all open line items for mulitple customers and company codeand clear. Records selected from the list are cleared using transaction F-32.
    Can u please help me to provide the Zprogram which u have, so that it will be using for me.
    My client want automatic customer clearing for RTGS related items
    Process flow for RTGS in india is as follows,
    So now my client need a customized program for automate the clearing open items, (Last block which is marked need to be automated).
    Like as F-32 is used to clear open items for individual customers, my client needs a program to be for multiple customers, before clearing the open items they need a overview for all the customers and they need the program which will clear items which are related to only RTGS payments but not Cheques, that is main actually.
    Thanks In Advance,
    Nitin Kumar
    8095885285

  • Clear/Open Item Symbol Green Check Mark

    SAP Gurus,
    I am running report FBL3N, for a clearing account, under clear/open item symbols instead of seeing a red dot or green dot, i see a check a mark. Does anyone knows what this green check mark means, and how can I clear the items?
    Your help will be greatly appreciated

    Venkat,
    Right now client has the accounts set-up as Line Item Display ( ALL OF TEH G/L ACCOUNTS), if I check open line item, when I save I get an error, saying there are errors. When I pull the long text to see the message of the error, it tells me,the message below. It apepars I have to create new accounts and then transfer the items to the new account is that true? or is there another way to fix this. I thought that by just checking the open item management option was sufficient.
    You cannot change the open item management setting; (see long text)
    Message no. FH087
    Diagnosis
    This account does not have a balance of zero.
    System Response
    You cannot switch the open item management specification on or off with this transaction.
    *Procedure*If you want to switch this function on retroactively for a certain account, you should create a new account with the correct setting and use this to make a transfer posting of existing items.
    If you want to switch off the open item management function retroactively for an account, you must first clear all the postings currently on this account. You cannot make any changes to the account management method until this is done.

  • Issue while clearing open line items

    Hi team,
    While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
    Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
    Regards,
    Nagaraju.

    Dear:
                        The option  to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
    Please check OSS note 95077. Check the settings in
    IMG >Financial Accounting (New) >General Ledger Accounting (New) >
    Business Transactions >Document Splitting >Activate Document Splitting
    Check the following link for the same
    F.13 clearing Document contains Lineitems
    Regards

  • F-44 clear open item of payment block

    Hi dear.as we know we can do F-44 to clear open AP.my client has requirement is as:
    if open AP item has payment block,,can not clear it before removing payment block.
    can anybody tell me how to achieve it

    Did you (or anyone else) manage to apply the payment block in f-44?
    I did it, by activating BTE 00000950 and testing field ZLSPR as it reads and validates itens of the document screen.
    Edited by: Alec Souza on Apr 29, 2011 8:21 PM

  • Another modif  tcode clearing open item from MM without use F-51

    all Guru ,
    Please help. Is there any way for another new modif  tcode clearing open item from MM without use F-51. So i can use copy transparent from main table MM, for item like plant, vendor, material,price, oty, plus add new field for calculation method in order to post this result formula through FI posting without F-51 but also can clear open item dan clearing line item ? or only can clear open item ? ...it's oke. For line item can be done maybe can be run with F-03 ir F13E
    I am trying to observe table BSIK (open item) and relation with BSAK(clear item)...is it right way ?
    Case :
    i want to clear open item for GL account inv.of.promises from transaction MM, with jurnal :
    inv.of prom (Db)
             Inventory (Cr)
    Then this inv.of prom must be calculated again with raise price. And then this cummulate in the of month.
    After that we want to clear with posting FI by searching any open item for that GL with jurnal :
           Other receiv.(Db)
           Accrued exp (Db)
                      Inv.of.prom (Cr)

    Hi PK,
    1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
    - Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
    2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
    You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
    3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
    OIM activation for a GL - Refer Note No.1356457.
    OIM Deactivation :  You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
    4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
    J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
    Hope this helps you.
    Regards,
    SAPFICO

  • Not clearing Open items in Automatic Clearing Program

    Hi all,
    I am trying to execute Automatic Clearing Program throug F.13 transaction, but it is not clearing the relavent open items. When  I have tried to execute in Test Run mode, it is displaying the open items, but in production run it is not clearing the relavent items. In OB74, I have selected the criteria 1, Criteria 2 and Criteria 3 as Vendor Number, Purchase Document and Assignment respectively.
    Please suggest me, what I have to do to clear open items
    Regards
    Chandra

    Hi,
    Please check whether the accounts you are selecting for clearing are either are subledger or maintained at open item level managed.
    Hope this helps, if yes, please assign points.
    Regards,
    Harish

  • BAPI _ACC_DOCUMENT_POST for clearing open items

    Hi,
    I am using BAPI_ACC_DOCUMENT_POST for clearing open items.
    When i post the same in F.13 (automatic clearance ) there is no error log,when i do in BAPI_ACC_DOCUMENT_POST
    its returns two errors.
    609 Error in document: IDOC 010000008410012009 CKDCLNT140
    702 Balance in transaction currency
    Header details are given as per certain sdn suggestions.
    note: i have changed the G/L account as automatic account (if i am using original G/L account its throwing an error msg
    such as direct posting not possible).
    Can any one help to get through this??
    Edited by: sangeearvind on Dec 16, 2009 12:24 PM

    Hi
    The first problem is you're using the wrong BAPI: BAPI ACCDOCUMENT_POST is to post account document, not to clear open item.
    I don't think there's a BAPI to do it
    Max

  • Post with Clearing: BAPI for clearing open items

    Hi,
    I'm looking for a way to use the logic of transaction F-30 (Post with Clearing) in an external application. I want to clear open items. Is there a BAPI or something else for it? While debugging transaction F-30 I found the function module POST_DOCUMENT together with function module FI_DOCUMENT_PROCESS which are used to actually clear the selected open items. But there is lot more coding around these function modules that might be needed/important. So, is there a BAPI that puts all together? Or what's the best way to do it at all?
    Regards,
    Robert

    Hi,
    BAPI_CR_ACC_GETOLDESTOPENITEM BAPI/BUS1010: Determine Oldest Open Item .... BAPI_AR_ACC_GETBALANCEDITEMS Customer account clearing transactions
    thanks
    abdul

  • How to use paymetn advice to clear open customer items

    Hello,
      I manually created a payment advie for a certain amt and i want to use it to clear open item, when i use the payment advice numebr in f-28 incoming payment screen i do not see any data coming up from the payment advice, can anybody tell me how can i use , is there any customizing steps i need to do before the cash application.
    kindly let know, points will be awarded.
    thanks.

    When creating the payment advice, try to include as much information as possible.  Like the Customer Number, Amount and even the invoice that this payment if for.  Then when you use transaction F-28, make sure in put the payment advice document number in the initial screen.  Payment advices work very well with the automated lockbox.
    I hope this helps!

  • Query to Report Customer Open Itens

    Hi Friends,
    Does anyone have a documentation of  how to do a query to report customer Opens Itens?
    How can I do to join customer name´s and due date in this query?
    Thanks,
    Josiane Alves

    Hi Josiane,
    First of all, you need to create an infoset (SQ02 transaction), in this transaction you will determine which tables you will use in your query.
    After that, associate this infoset for the users that will see that. (SQ03 transaction)
    So, in SQ01 you can create you query.
    If you are not using several tables, you can use SQVI transaction. In this transaction you are able to join the tables that you want.
    Let me know if it figure out your issue.
    Thanks
    Daniel Dorta

  • Issue while clearing open items with a payment advice

    I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
    In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
    In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
    I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
    This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
    Thanks

    Include - MF05BFO0
    FORM op_pruefen
    Context:
              WHEN 'K'.
               ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
    Create an enhancement here and add this code
                   IF SY-TCODE = 'FB1K'.
                         T041A-AUGLV = 'AUSGZAHL'.
                   ENDIF.

  • Status used in open and completed transactions in Fact Sheet

    Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
    Appreciate any help on the above.
    Cheers!
    SF

    No response. Based on what is being debugged, all transactions are taken into account.

Maybe you are looking for