Clearing Payment to a G/L account set up in Reason Code

I am having a problem posting an overpayment/underpayment to a G/L account using a reason code. What I am attempting to do is, using F-28, have the remainder of an underpayment post to a G/L account attached to the reason codes. What I need to have work is that in F-28 I do not want to have to enter any data on what the residual amount is, it should just take whatever is not paid and apply it to the G/L account tied to the reason code. I have set 3 new reason codes in OBBE to test different possibilities with the checkboxes in that transaction, and have attached each of the reason codes to accounts using OBXL. What is happening now is that when I enter a short pay amount for an invoice and I enter a reason code in the RCd field in the residual tab - I hit save and it seems to try to attach the remaining amount to an account that is currently tied to a blank reason code in our setup in OBXL. I would think that since I am placing a code in the RCD field, that it would use the account tied to that. I have also tried to use the reason code field below, but encounter the same results or, with one of my codes that has the "charge off difference via separate account" checkbox checked, it will not allow that code in that field below.
There must be a way to take the shortpay amoun,t and without entering the residual amount anywhere, use the G/L account tied to the reason code to post the remainder to. Can anybody help on what I may need to do to get this to work?
Thanks -
PS. This is not a tolerance issue as I have set the tolerances for both the customer and the user high enough to allow under/overpayments.

No... this is SAP standard.... if you are treating them as residual payment and the GL is seperate than the small diff GL we have to enter the amount there..... as system cannot understand whats the differnece when we dont put the amount there......
we can always see the field NOT ASSIGNED in the bootom.. it is just the matter of copy paste for the user.... it has to come thro user discipline.... i dont see a standard sap way of doing it,....

Similar Messages

Incoming Payment with Underpayment/Overpayment in F-28 with reason code

Hi All,
While making a incoming payment with overpayment / underpayment in F-28, I am getting an error u2018Reason codes with automatic charge-off are not permitted here u2018. The reason code is defined with charge off checked and the account for differences is defined for the same.
Please advice
Thanks

Please check "Indicator: Charge off difference via separate account" in reason code settings (TCode OBBE). If this indicator is set against the reason code that you are using, you will getting the error.
What you can do is either use different reason code or in residual items tab you can specify the reason code with residual items.
Thanks,
Sukhbold
Edited by: Sukhbold Altanbat on Oct 13, 2011 7:47 AM

Multiple reason code in payment advice

We have requirement to put multiple reason code at the time of cash application which we can do manually via f-28 and via payment advice
F-28 is working fine but payment advice is not
Steps
Booked AR invoice of $1000
Create payment advice of $1000 with below line item and reason code.
AR Cr 200$ with reason code p1
AR Cr 300$ with reason code p2
AR Cr 400$ with reason code p3
AR Cr 100$ with reason code p4
Apply cash using payment advice.
Issue
The first line of payment advice is booked as on account AR Cr 200$ without reason code p1 and residual is created for other 3 lines
I am expecting the result should be that it should create residual for all the 4 lines with correct reason code.
Expected result
AR Cr 200$ with reason code p1
AR Cr 300$ with reason code p2
AR Cr 400$ with reason code p3
AR Cr 100$ with
Is it something i am missing at the time of creating payment advice or applying cash.
I tested and had issue with the first item of payment advice. There should be something I missed in the payment advice creation .
Thanks in advance for help.
AB

Hi,
What you could possibly do if the reasons for rejection are similar for each lot is to create these combinations as UD codes and assign them to your selected set. Else you could record the reasons for the rejection in the long text and display this long text on your reporting.
Regards,
Roderick

Over/Under Payment from Customer - Reason Code

We are trying to perform an incoming under payment from a Customer. We do not want to do a partial / residual payment. We would to like to send the difference amount to a particular GL account XXXXXX (bad debt). There might be situations where the difference amount is charged off to another GL account YYYYYY. Can we handle these situations using reason codes?
I tried to configure a couple reason codes to handle this, but couldn't make it work.
Could you please explain in detail how can we make the over/payments to be charged to different accounts.
Any help would be greatly appreciated.
Thanks,
Venkat

Hi,
You define Reason Codes in Customizing. Use the menu path in IMG :
Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments -> Incoming Payments Global Settings -> Overpayment/Underpayment -> Define Reason Codes
In the reason codes definition, tick the check box with Heading 'C' immediately after the Correspondence Type.
Then maintain the settings Define Accounts for Payment Differences. In this setting, you can have different accounts depending on the reason code. Click on Rules and tick the check box against Reason Code. Click on Accounts and maintain the correct accounts against the reason code.
Once you have maintained the above settings, you can post the difference directly to a GL Account using Reason Code. For this, when you enter incoming payment using T-code F-28, in the open item screen, click on the Residual payment tab and enter the residual Amount. Just next to residual tab is the field to enter the reson code. Enter the appropriate Reason code and your posting will be done to a GL Account.
Hope this helps
Regards
Mahendra
Assign points if useful

Cross company clearing accounts set up tcode

When the paying company is not sending company and for that we need to do intercompany clearing account set up .
What is transaction code? Just slipped out of my mind.
Thanks alot
Kavi

Hello Kavitha,
you can use transaction code OBYA for configuration of inter-company payments/transactions. In OBYA you define clearing accounts. These clearing accounts represent the receivables and payables between company codes which result from central purchasing or payment. Here you want to pay vendors of 1400 co.cd through 1100 co.cd., means you use Central payment configuration
If useful pl assign points*****
Thanks
Para

Payment type in account setting not done

Payment type in account setting not done

You need to put your valid credit card details associated with your Apple ID.

Post Payment not Clarify but on Account for payment batch

Hi,
this is FI-CA account current.
My customer processes distribution batches. The Clearing control finds the account but not an open item with same due date. Now the payment is posted for clarification.
In clarification we can set a flag to post it on account.
We would like to do this automatically during payment batch processing.
Thanks for any idea - hope I'm right here.
Regards,
Clemens
Edited by: Clemens Li on Oct 18, 2011 5:43 PM

Well,
it is more complex than expected, but now solved:
A functional guy told me that for the payment batches the posting on account was generally switched off - no way to accomplish it.
Only payments with all selection values exactly matching an open item resulted in clearing this item. Whenever a settlement run for the account had cleared open items due and a payment came later, the processing could not find the open item.
So what dis we do: We allowed posting on account generally. Now, in FI-CA exit 111, the standard IS-U creates a payment-on-account. We extended the exit, search for a cleared item with exact selection criteria. If it exists, OK, post on account. If not, we destroy the on-account information and the payment goes to clearance.
But this is very special situation for special requirements in German deregulated energy market, so probably not of much interest.
Regards,
Clemens

I try to create my Account ID....and i don't understand why i have to put payment? before my friend create Account ID don't have to put payment they still can create account ID... and now i buy iphone but i don't have credit card that mind i can't not do

Dear
I try to create my Account ID....and i don't understand why i have to put payment? before my friend create Account ID don't have to put payment they still can create account ID... and now i buy iphone but i don't have credit card that mind i can't not do it

Hi,
This Link explains how to Set Up an Account ID... without a credit card...
http://support.apple.com/kb/HT2534
Hope it helps,
Cheers,

Payment Difference by reason code charge to separate GL Account

Dear All
We have set reason code for payment difference with indicator charge to separate account. Also we assign separate account for each reason code in OBXL. When we try to post incoming payment with difference and assign the reason code system ask to do the account determination for Transaction ZDI. We already have settings for ZDI with reason code. When we enter one more entry for transactions ZDI without reason code system charge it to the account but in this way we cannot achieve our objective to post the difference to different account according to reason code.
Please advise
Thanks and Best Regards

What do you mean by "hierarchy"? I'm not aware of any hierarchies within Transaction Management.
You need to set up an account assignment reference for the different portfolios (IMG activity "Define Account Assignment References").
Then you need to set up the determination logic for assigning the account assignment reference to the transactions based on portfolio (IMG activity "Define Account Assignment Reference Determination (OTC Transactions)" or "Define Account Asst Reference Determination (Securities/Listed Derivatives)", depending on product type.)
Finally, you need to set up the account determination to assign the GL accounts to the different account symbols for each account assignment reference (IMG activity "Define Account Determination").
Regards,
Shannon

HT2731 I need to update my billing/payment information for my appleid account?

I need to set update my billing/payment information for my appleId account?

We are just user here and can't do anything with your account
Try http://www.apple.com/support/itunes/contact/
Allan

HT4098 i have turned off auto-renewal for magazine. it's also confirmed in my apple id account setting, but itunes keep taking money from me each month. ***?

i have turned off auto-renewal for magazine. it's also confirmed in my apple id account setting, but itunes keep taking money from me each month. ***? can someone clear me out? i've spending money for nothing!

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

How to change the account setting for App Store

My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
Thanks,

once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
it will look like it is doing nothing but give it time and it will sign you in with the new username.
is it possible you have multiple itunes accounts?
when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
be well

Account set up problem

I'm trying to set up an iTunes account, I select my payment option as Paypal, I move thru the PayPal screens just fine but when I hit "return to merchant" I get some long error message that extends beyond the screen so there is no cancel button -- in order to get rid of the screen I have to force quit Firefox.
Since I could not get Paypal to return to iTunes I can't "complete" my account set up. I do get an email from Paypay saying that iTunes has been set up as a merchant, but I can't complete the iTunes account set up - the long error message in PayPal says something about a missing a link!
I tried to get iTunes to launch Safari thinking at least I could see if I can cancel out of the PayPal error message but I can't find where to get iTunes to launch Safari not Firefox.
Any suggestions??
UPDATE: iTunes now gives me an error saying it can not verify my PayPal Account. What's up with that???

Hi swds,
Welcome to Apple Discussions!
I can't provide much help with Paypal/Firefox, but to get Safari to launch when you go to the iTunes Store - or anywhere else, you need to have it set as your default browser.
To accomplish that, open Safari>Preferences>General and use the Dropdown that says Default Web Browser to choose Safari from the browsers installed on your machine.
Good Luck,
John
G5Dual 2Ghz  23" ACD  iSight Mac OS X (10.4.8)  20" Intel iMac 

I just got my Ipad2 and have my email accounts set up. When I go to the folder icon at the top of the page and click on Sent Items they disappear to somewhere. How do you look at your sent items?

I just got my Ipad2 and have my email accounts set up. I have sent messages but when I go to the folder icon at the top right of the page and tap on SENT emails it makes the inbox email on the screen disappear. How do you check your sent emails? Thanks for your help.

You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

I have my mums payment details on my itunes account, but i bought a £15 itunes voucher today from the shop and put it on my phone.. but it wont let me buy any apps becouse it keeps going to my mums payment details. can someoe help me with this

i have my mums payment details on my itunes account, but i bought a £15 itunes voucher today from the shop and put it on my phone.. but it wont let me buy any apps becouse it keeps going to my mums payment details. can someoe help me with this

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Clearing Payment to a G/L account set up in Reason Code

Similar Messages

Maybe you are looking for