Clearing state currentState = ''; not working

I am developing a code where I have developed three components that is three states for me. I have a contol on my home screen (base state) which is able to take me to any of these states whenever required. My issue is once I reach to say in State A and want to go back to home page. My "HOME" button in State A is not working even after I am clearing state using currentState = '' ; Do I have to do anything extra to get it to home page from State A here? Any help would be highly appreciated!!

Whenever I create a flex app that has several states, I've gotten into
the habit of simply copying my base state and renaming it something
to the effect of "start", so rather than trying to clear your state try this method.
Slightly superfluous and even a tad bit inane, but it works and gives you an
extra state buffer between impromptu edits and your base state .
So copy your base state
and rather than:
currentState = "";
try currentState = "start";
on for size.

Similar Messages

Delete statement is not working.

Hi,
find the code. Here the delete statement is not working and i am getting sy-subrc = 4. although ,
xe1edp10-idnkd = 34596 and dint_edidd -sdata = 34596.
please help me ...
loop at dekek_x.
loop at dint_edidd where segnam = 'E1EDP10'.
if dekek_x-stpin = 1 .
CLEAR xe1edp10.
MOVE dint_edidd-sdata TO xe1edp10.
delete dint_edidd where sdata = xe1edp10-idnkd.
endif.
endloop.

1st thing..
i tried this :
tables: edidd, e1edp10.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
move edidd-sdata to e1edp10.
IF edidd-sdata = e1edp10-idnkd.
WRITE: e1edp10-idnkd.
else.
WRITE: 'nothing'.
ENDIF.
output
>315934 EA 017
>315934 EA 017
2nd thing,.
your loop inside loop doesnt make any sense as they are not related any where.
3rd thing:
the fields are not type compatible.. this might be the reason for wrong delete statement..
and 1 more clarification:
TABLES: edidd, e1edp10.
DATA :it TYPE TABLE OF edidd WITH HEADER LINE.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
APPEND edidd TO it.
edidd-sdata = '315934 EA 018'.
APPEND edidd TO it.
LOOP AT it." where segnam = 'E1EDP10'.
CLEAR e1edp10.
MOVE it-sdata TO e1edp10.
DELETE it WHERE sdata = e1edp10-idnkd.
ENDLOOP.
in this also delete is working perfectly fine... you run and check..

Insert statement will not work if select statement has less number of colum

Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshad

user13360241 wrote:
Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshadmore often than not "TEMP" tables are NOT required & are highly inefficient in Oracle.
Either only specify explicit column in TEMP to get data,
or provide value for "extra" column in TEMP

CASE Statement is not working Derived table

Hi All,
in the bello SQL Statement case statement is not working in derived table. I am new to creation of derived table if any body knows plz kinldy help me out on this.
SELECT x.market, x.droprate as med1
FROM
(select upper(market_name) as market, fulldate as date_value,
     (sum([Dy_LOT_DROPS_N][Dy_OB_HO_DROPS][Dy_NonRF_Drop]))/
          nullif(sum(CASE WHEN (month(BBHDLY.FullDate)}>= 6 and { year(BBHDLY.FullDate)} = 2011) or {fn year(IDENSLABBHDLY.FullDate)} > 2011
THEN BBHDLY.Dy_Calls - BBHDLY.Dy_HO_CHAN_ALLOC ELSE BBHDLY.Dy_Calls END),0)*100 as droprate
from BBHDLY sla
inner join Dim mkt
     on sla.bts_name = mkt.bts_name and sla.SectorID = mkt.Sector_Id
               where fulldate >= GETDATE()-46
               group by market_name, fulldate) x,
(select market_name as market, fulldate as date_value,
(sum([Dy_LOT_DROPS_N][Dy_OB_HO_DROPS][Dy_NonRF_Drop]))/
          nullif(sum(CASE WHEN ({fn month(BBHDLY.FullDate)}>= 6 and {fn year(BBHDLY.FullDate)} = 2011) or {fn year(BBHDLY.FullDate)} >
2011 THEN BBHDLY.Dy_Calls - BBHDLY.Dy_HO_CHAN_ALLOC ELSE BBHDLY.Dy_Calls END),0)*100 as droprate
from BBHDLY sla
inner join Dim mkt
     on sla.bts_name = mkt.bts_name and sla.SectorID = mkt.Sector_Id
               where fulldate >=GETDATE()-46
               group by market_name, fulldate) y
where x.market = y.market
GROUP BY x.droprate, x.market
HAVING
   SUM(CASE WHEN y.droprate <= x.droprate
      THEN 1 ELSE 0 END)>=(COUNT(*)+1)/2 AND
   SUM(CASE WHEN y.droprate >= x.droprate
      THEN 1 ELSE 0 END)>=(COUNT(*)/2)+1
Thanks

It looks like SQL Server or Sybase given that you're using getdate().
As such, Vinesh's comment to use decode is wrong - decode is Oracle syntax.
Looking at your statement again, I've noticed the following:
you have no { to match the first } - not sure why you're using them anyway.
you haven't given x.market a name - use x.market as market instead
use coalesce instead of nullif if you're on SQL Server.

Insert statement is not working for z table.

Hi experts,
My insert statement is not working.
I have used follwing code to update z table .
INSERT ztable FROM TABLE gt_table.
here i have checked gt_table and its filled up with all the records properly.
now the problem is in this table i have 15 fields and it inserts 14 fields of it but
the last field is never inserted though in gt_table i can see value for last fields also.
I have added this field in ztable recently . so i also used se14 to adjust table but still i am facing same problem.
please help me out.
thanks,
Neo

> > Table maintainance will have nothing to do with
> this
> > issue.
>
> It does sometimes when you are trying to see the
> values from SM30 instead of SE16. The value may be
> there, but it may just not seen in SM30 because the
> table maintenance hasn't registered the addition of
> new field.
>
> Another place to look at is the activation log to see
> if there are any warnings issued there.
You shouldn't use SM30 to view table entries. You use this transaction to maintain the table entries. Pure and Simple.

Delete Statement is not working correctly

Hello,
The following delete statement is not working correctly.
If I press delete it will delete everything in the category table
I don't know whats wrong with it.
----delete row from category if there is not infrastructure to support------
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;
Thanks
Mary

Hi,
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
Andy

SORT statement is not working!

Hi frdz,
Below SORT statement is not working. Can any one explain me why this is happening.
SORT i_bseg ASCENDING BY belnr bukrs
                    DESCENDING kunnr.
I have table content as below.
BELNR      BUKRS KUNNR
0016000000|CROP |
0016000000|CROP |0008910168
Before and after the sort content order is same.
I want to sort the content like below.
0016000000|CROP |0008910168
0016000000|CROP |
Is there any thing wrong with the sort statement???
i_bseg is defined as TYPE STANDARD TABLE OF
Sort criteria must not change i. e ascending by belnr and bukrs and descending by kunnr.
Thanks,
Vinod.

hi vinod,
this is because on your statement, you are sorting BUKRS in descending order and KUNNR in ASCENDING order.
please take note that the sort order should come after the sorted field. if no order is given, the default which is ASCENDING will be used.
do your sorting like this
SORT i_bseg BY belnr bukrs kunnr DESCENDING.
regards,
Peter

Clear Key does not work in DW (OSX)

In Dreamweaver, when you select a local file and hit the
Delete key (back delete located in between forward slash and the
end key), nothing happens. In the contextual menu, there is a Clear
key symbol but nothing happens.
Does anyone why the Clear key does not work?
I'm using OS X 10.6. But I could remember this happening in
earlier OS.
Thanks

Really? Something is wrong there. I sure can....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:epu8iu$sed$[email protected]..
> philoman wrote:
>> synterx, thanks for your reply.
>>
>> Does it work for you on the Local Files as well???
>>
>> Command-Delete only works for me on the Remote
Files.
>>
>> Any ideas?
>
> I can't delete files or folders, and can't create
folders in local files
> on Mac with DW2004. I always keep my site folder open in
the finder to do
> that.
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
> Downloads: Slide Show, Directory Browser, Mailing List

Clear Block All not working

Hi,
I have a calculation script that fixes on some sparse dimension members and then runs a Clear Block ALL command.
This script works in dev environment, but does not work in prod.
I copied the application from prod to dev and executed the script and data was cleared. But the same script does not work in prod.
Any help is appreciated.
Regards

Hi vs,
When you fix any dense Member/Dimension then "ClearBlock All" will only clear data not blocks, but in case when you fix sparse dimnesion/Member it will clear all blocks,
so please recheck you dimensions which you have fixed in FIX Statement.
Thanks,
Avneet

SELECT statement does not work if characters ## are contained in field

Hi Experts,
I have the following statement:
select single field1
    from table1
    into var1
    where field2 = text.
This is a very simple statement that is working for me almost always correct. However there is a situation where the system is not able to find the record in my table. If text is equal to JAN##2011 the system won't deliver a result even if I have an entry in table1 with exactly this value.
TABLE1
field1 field2
rome JAN##2011
paris JAN2011
only if text is JAN2011 the select will find a result.
all fields are defined as CHAR.
Thanks in advanced

Hi Alberto,
probably ## is not ## :-).
is the visible representation used by ABAP to show any non-displayable characters as control characters like TAB, CR, LF, FF and the like.
In debugger you can switch to HEX display of values, if you see something like 0A0D you can find this using CL_ABAP_CHAR_UTILITIES constant attributes.
Regards
Clemens

Message statement is not working?

I would like to place a message in the following method:
It's defined like this:
Position & cannot be delimited because the position is occupied until &
This is in the program:
MESSAGE: s029(zpom_001) WITH st_hrp1001-objid(8) st_hrp1001-endda(8), display like 'E'.
I inserted the (display like 'E' ) in so I can get the RED 'X' error message. If I take out the display like 'E', it works.
I get the following error:
Three-digit error number XXX required in the "MESSAGE EXXX..." statement.
Thanks for any help you can give?
Jeff

Satish,
That did not work...
If I remove the part of the message ( Display like 'E' ) it works...... But if I want to get a RED X error message, what would I do?
JeffG

The Downloads Clear List Button Not Working In Firefox 19.0

Hello,
After upgrading Firefox to version 19.0 today, I noticed that the Downloads Clear List Button does not work & is always grayed/greyed out, and so you can not clear all downloads; and so you have to remove them each one-at-a-time.
I did not have this problem until upgrading to version 19.0
Screenshot:
http://www.use.com/showoriginal.pl?set=1c0659d1946249dc69dc&p=1
Thank you,
-John Jr

I made a bug report:
https://bugzilla.mozilla.org/show_bug.cgi?id=845450

Clear history is not working

I have used Firefox for years and have always set the Privacy tab to "Clear history when Firefox closes". Tonight for some reason it started not working. After closing Firefox I can open it up again and am signed in on all my websites. As you can imagine, this is kinda startling. How to fix?
I just realized this started happening pretty much moments after I installed QuickTime, I don't know if this is related.

I'm not sure if "hang" is the right word, but occasionally Firefox will not close after I click "x" and no matter how long I wait to start a new session, I get a message that tells me it's still running. I have to open Windows Task Manager to close it manually in those cases. This was simply that the Privacy settings were not working the way I had them set up for years. After I turned my computer off last night and on this morning, it seems to be fine now.

Cursor 'mouseover' state change not working in Chrome

Flash novice here.
I'd appreciate any tips on where to start looking for answers to this problem.
Here's the basic details:
1. 40kb banners with no audio and nothing tricky
2. Created in Flash Pro CC 2014
3. Opened and re-saved in Flash CS6 for delivery to client website
4. Client IT reports that everything is fine and banners are up and running
5. For me personally, the mouseover state for the cursor works in Safari, but not in Chrome.
6. While the mouseover cursor state for my banner is not working in Chrome, it is working for all the other banners/ads on that page.
7. A friend tested the banner on all major browsers and the mouseover cursor state works for him.
Any ideas where to look would be appreciated.
Should I be talking to the host website, examining the Flash file, or checking my version of Chrome?
Thanks in advance.

This forum software is very tricky; updates to forum posts sometimes need to be done three or four times until it "takes". I have been able to update your original post.
Now that it is actually readable, I will go and have a look at it.

Clear Shape hyperlink not working?

I created a text graphic - I then went and created 8 clear shapes and enabled them as hyperlinks with the inspector and placed these clear shapes over the text graphic. When I check in iWeb, it works perfectly, however when published, the links do not work, as if they are not there.

You will need to make the shapes "almost" clear. Give them an opacity of 1% and that should work.

Clearing state currentState = ''; not working

Similar Messages

Maybe you are looking for