Clearing the BlackBerry World cache
Hi there!
In BlackBerry OS you could clear the AppWorld cache by pressing ALT + RSTRST. Did anyone find out yet how this is done on BlackBerry 10. There is nothign yet about BlackBerry 10 in the KB (http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB24714&sliceId=2&cmd=displayKC&d...
Hey Binij
You can tell if you see the icon on twitter?
To use it you must have data plan or BIS.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I
Similar Messages
-
Server down after updating the Blackberry World App Store
Hi there,
hopefully u can help me. For two days, after upgrating the Blackberry World App i'm not able to acces the following:
- internet
- no more push up emails
- BBM, Whatsapp, Windowslive Messenger, Facebook
- email settings ( is giving me the following error " Your device had a problem connecting to the server"
While i was upgrading the latest version of Blackberry World Application, was wasking me to update my Blackberry ID so i did it and after that all the problems came up. Looks like my blackberry server is down, can't acces anything. I contacted the carrier , they checked and said is it from aplication i have updated. They suggested me to delete the application which gives the problem. I deleted the files of Blackberry World App , but still the module is it in my mobile and can't be acces even when i tried to reinstall it.
I don't know if this can help, but i have noticed that BIS is like disconnected while EDGE signal is there. Sometimes "EDGE" changes into "edges" ( small letters ) and GSM.
The carrier sent me again the service books, but i still have troubles ... nothing at all changed !
The following Services Status is there:
Connection : Mobile Network
Balckberry Internet Service
Connection: not connected
Blackberry Enterprise Server
Connection: not connected
Mobile Netwok:
edge
Mobile Network Provider
orange
I can't figure out what can cause this problem. Any help will be much appreciated.
Thank uIts clearly the ios 6 update...I have a 2 month old 4s...worked perfectly until the upgrade...now my app store rarely opens...other apps crash or will not load..battery life is now weak weak weak..
The thing that TRULY amazes me is that I was on the phone with an apple tech yesterday,actually 2 different techs, when I said that there are several users on this site with the same problem their response was "first Ive heard of it !"
Useless useless.... -
Can't connect to the BlackBerry World server
It says "BlackBerry World is having trouble connecting to the BlackBerry World server. Verify your network connections and try again."
I have recently updated my BlackBerry Playbook. It's.been like this for weeks now.
Any help would be appreciated.
Thanks.The Playbook can only do updates with WiFi, or if it is a 4G it will do the updates over the mobile network.
If the Playbook does not update, try a re-start. Also check if your router is allowing WiFi access to the net.
If you did an operating system update, you may have to go the Identification and re-enter the Playbook's ID and password to allow access for updates and backups to work. The ID is in the main system menu listing.
Jerry G. -
Is it possible clear the class loader cache programatically?
Hi,
Is it possible clear the class loader cache programatically?
ThanksBy the cache do you mean the loaded classes? If so, you can do that by discarding any pointer you have to the class loader and creating a new class loader. ...though I wonder why you would need to do that...
-
How to clear the directory server cache?
How to clear the directory server cache?
we are using the directory server 5.2
Thanks,
Subbutry asking it here - http://forum.java.sun.com/forum.jspa?forumID=761
-
How to clear the ADF Entity cache
Hi All,
While I'm using an entity based updatable view object,after deleting a record,I created a new record with the same key,It displays the deleted record instead of new record.
Sample steps:
1.Create a updatable view object with key attribute name sequence.
2.I dropped this as table in the view page.
3.I created a new record for this using CreateInsert action
4.I entered the values for this new record.
5.I deleted the new record
6.Again I created a new record.
7.If I enter the previous sequence value,it displays the old record values, If I enter a different value the delete record does not affect this.
So I think,I need to clear the entity cache, but I have used clearCache() of ViewObjectImpl, there is no change.
If anyone came across the problem and fixed,Please let me know the solution.
Regards,
FelixYou are wrong here. if you don't commit the delete, the record is still there.
You should not enter the same sequence again anyway. a sequence should be a one time number, once used it's gone. set the new key using a groovy expression and make it read inky in the ui.
Timo -
Clear the selection screen cached values
Hello BW gurus,
Is there a way to clear the contents of the selection screen(cached variable values) whenever it is refreshed?
Thanks,
madhuriHi Madhuri,
Please check this link if any use let me know
http://help.sap.com/saphelp_crm50/helpdata/en/6e/798e07b33b11d5993800508b6b8b11/frameset.htm
thanks
Ranganath -
How can I clear the Quicktime menu cache?
My quicktime player has 10 old file names cached. They show up when I right click a running QuickTime.app ; and they show up when I choose "Show recents". They are not connected to any actual file (I've removed the files), but I cannot make them go away. The help page says to use File | Open Recent | Clear Menu, but the "Clear Menu" choice is grayed out (and no recent files appear there). Clear Menu did seem to work, exactly once, though I cannot recall if the movies were the same names or some other set.
This appears to be a bug which has two components:
Clear Menu should just work; and doesn't
QuickTimePlayer should have a preferences pane that allows me to choose a reasonable number of prior file names to cache (say 0 to 20). Somewhat amazingly, it has no preferences pane at all.Jon Walker wrote:
The help page says to use File | Open Recent | Clear Menu, but the "Clear Menu" choice is grayed out (and no recent files appear there). Clear Menu did seem to work, exactly once, though I cannot recall if the movies were the same names or some other set.
This only seems to work before you delete/remove the referenced files. I.e., it appears the "Clear" routine may actually check the link(s) for validity and if no longer valid, aborts the "Clear" routine. Be advised that you get similar results if you have an active RSS reference, deleted the sourced web site, and then try to clear the RSS reference entry.
That is pretty much what I had decided. This is still a bug, though: Clear Menu should just work.
Jon Walker wrote:
QuickTimePlayer should have a preferences pane that allows me to choose a reasonable number of prior file names to cache (say 0 to 20). Somewhat amazingly, it has no preferences pane at all.
The preference already exists. Check out "System Preferences > General > Number of Recent items > Documents" option allows settings of None, 5, 10 (default), 15, 20, 30, and 50. Similar opts arew available for recent "Applications" and recent "Servers" settings. This area also controls the "Resore windows when quitting and re-opening apps" option.
This too is a bug. I do not want the same number of "recent" items for all my apps. KISS principle should be "Keep It Simple, Stupid, But Only As Simple As Possible." My usual technique is to provide an adjustable global default for such things, with added individual adjustments. That way folks who have no issue never touch it, folks with a plain vanilla requirement touch one thing and folks who have complex requirements have a complete set of valves and switches under the red cover. -
Clearing the outgoing mail cache
How do I clear the outgoing cache for my mail since I can only receive and not send emails?
I got assistance from Apple with this once before but I can't remember how anymore, and now they won't help me.
I'm pretty sure it has something to do with the 'Library'?
ThanksIIRC, I was told it was dangerous to do if anything at all was running.
I always use Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start. -
How to clear the OTHER memory cache
Hi there fire fox help,
I have read the page on 'How to clear the cache' but this does not seam to clear everything.
When I am editing a website on my computer and viewing the changes through fire fox everything works great, I just hit refresh.
But when testing the websites changes online (after unloading it) I can not see any changes, using the refresh button is of no help and clear the cache is not helping either.
I get quite frustrated with this as I then have to change the name of the web page just to get fire fox to refresh it properly and then change it back again.
Thanks for your time, MaxI've tried all these and Firefox still won't load the current image. I know it's there because Internet Explorer does load it. Is there anything else I can try or look at?
-
Click a tab - Clear the Corresponding Page Cache
When a user clicks a tab and they are taken to a search page that is assigned to that tab, I would like the cache of that page to be cleared so that
all previous entries in search fields are gone.
I would only like this clearing-out to happen when the page is entered via the tab and not when the page is refreshed as would happen following running a search.
Can this be done ?
Thanks!
LHi
You could make your unconditional branch pass a request value and then make the clear cache process conditional on the request value not being equal to that??
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;) -
Can I do this manually without having to reboot all the time?
I found the cache folders in the library folders as there are two of them.
Or should I just run a Unix command?
JohnIIRC, I was told it was dangerous to do if anything at all was running.
I always use Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start. -
Clearing the report from cache....
Hello all,,,
In my project iam using crystsal report for eclipse to generate reports.
Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
The name of my jsp page is poi.jsp
The name of my Crystal report is CrystalReport2.rpt
My problem is this....
when i run the report first time i can see my poi.jsp page and user can submit
the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp) rather its showing the old generated report.
When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page but the problem is when the user clicks on the print icon or any icon on the report its just showing the poi.jsp page...
When the user closes the report or when the clicks on the button to generate the report it should show the parameter page (poi.jsp).how can i solve this problem???
the code what iam using is as follows..( got it from the examples of CRE - database login )
response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader("Expires",-1);
response.setHeader("Cache-Control","no-store");
Object reportSource = session.getAttribute("reportSource");
if (reportSource == null )
String report = "CrystalReport2.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, 0);
reportSource = reportClientDoc.getReportSource();
session.setAttribute("reportSource", reportSource);
ConnectionInfos connInfos = new ConnectionInfos();
IConnectionInfo connInfo1 = new ConnectionInfo();
connInfo1.setUserName("CS22USER");
connInfo1.setPassword("CS22USER");
connInfos.add(connInfo1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setEnableLogonPrompt(false);
viewer.setDatabaseLogonInfos(connInfos);
if (session.getAttribute("refreshed") == null)
viewer.refresh();
session.setAttribute("refreshed", "true");
//response.sendRedirect("Test.jsp");
//session.removeAttribute("refreshed");
//session.invalidate();
//session.removeAttribute("refreshed");
viewer.setOwnPage(true);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
//session.invalidate();CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setReportSource(reportSource);
viewer.setHasRefreshButton(true);
viewer.setOwnPage(true);
viewer.setOwnForm(true);
viewer.setHasExportButton(true);
viewer.setZoomFactor(100);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setParameterFields(fields);
viewer.setEnableParameterPrompt(true); --this line will prompt -
Hello,
I use the following html code to open my signed java applet.
<APPLET CODE="Applet.class" ARCHIVE="applet.jar" WIDTH=100 HEIGHT=100>However if I make some changes into the applet code and open the HTML file in the browser, I see that the applet is being picked up from the applet cache. Thus if users have caching enabled on their systems they will not be able to retrieve the new version that I have made.
Is there a way to trigger the browser to download not to use the applet from the cache whenever an updated copy is available on the server.
I need this fix for IE, Mozilla, Netscape..
Thanks in advance.Hello,
the easiest solution (for me, at least, it was): when you want to reload an applet type x in the java console (it openes when you load the applet; if it doesn't open you may find it in the icons bar at the bottom of your screen) and then reload the applet
Hope it helps, good luck! -
Hello all,,,
In my project iam using crystsal report for eclipse to generate reports.
Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
The name of my jsp page is poi.jsp
The name of my Crystal report is CrystalReport2.rpt
My problem is this....
when i run the report first time i can see my poi.jsp page and user can submit
the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)
but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp)
rather its showing the old generated report.
When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page
but the problem is when the user clicks on the print icon or any icon on the report its just
showing the poi.jsp page...
When the user closes the report or when the clicks on the button to generate the report it should
show the parameter page (poi.jsp).how can i solve this problem???
the code what iam using is as follows..( got it from the examples of CRE - database login )
Object reportSource = session.getAttribute("reportSource");
if (reportSource == null)
String report = "CrystalReport2.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, 0);
reportSource = reportClientDoc.getReportSource();
session.setAttribute("reportSource", reportSource);
ConnectionInfos connInfos = new ConnectionInfos();
IConnectionInfo connInfo1 = new ConnectionInfo();
connInfo1.setUserName("USER");
connInfo1.setPassword("USER");
connInfos.add(connInfo1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setEnableLogonPrompt(false);
viewer.setDatabaseLogonInfos(connInfos);
if (session.getAttribute("refreshed") == null)
viewer.refresh();
session.setAttribute("refreshed", "true");
viewer.setOwnPage(true);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
//session.removeAttribute("refreshed");
//session.invalidate();
thanks in advance
regards
jackAs far as parameter refresh is concerned add in your code
viewer.setHasRefreshButton(true)
refresh button is appeared on crystal report toolbar and you can use this button instead of explorer refrsh button and every time you can add new parameters values.
Also, if you want to update reportsource in session object. means if user wants to view more than one different reports and want to invalidate reportsource form session.
add in jsp.
session.removeAttribute("reportSource");
Happy programming
Uzma
Maybe you are looking for
-
Need BAPI Name for updation of Subcontracting scheduling line agreement
Hi All, Can anybody please tell me BAPI Name for updation of Subcontracting scheduling line agreement from EKET table? Note: BAPI_PO_CHANGE is not useful for me. Thanks and Regards, Atul.
-
I've seen similar questions asked all over the web, but so far not a single "real" answer has cropped up, so hopefully you folks will know the way to do this. I have a main view that with a UIView subview, inside of which I am programmatically adding
-
Is it Possible to Convert 60i Footage to 24p?
I was wondering if it's possible to convert footage shot in 60i to 24p and if it'll look good. Like, if I took 60i footage and put it out at 24 FPS in progressive scan through compressor, would it take out the correct frames? Or would it look all wei
-
Bug in app store using search criteria
When using the search option in the app store a bug occurs. When jumping between options like update and whipping the search criteria. After the jump the search criteria appears again. How can you report such a bug?
-
Hi Experts, Please let me know what does a business case satnds for in general. I had been asked to prepare a business case for my client and I donot have any clue about this. Would be a real help if any one cen please pass me on soem older templates