Clearing the input field

After executing a report, the green arrow back key will takes us back to the selection screen with the original input on it.
However, I would like to see the selection screen without any previous input on it, so I could start entering new input without deleting/overwriting the old ones. Is it possible to do that?

hi there...
for the second part, the logic is as i gave above....
for the first part, you need to use screen end-screen.
set the attribute active inside the screen end screen to enabled on the press of the change button. before that, set it to disabled.
you can press f1 on screen to get the entire help on how to use screen end screen .
hope it helps.

Similar Messages

  • How to clear the input fields

    when I click on search button, I get the search result, but along with those results, I see some input fields automatically assigned the values in the search input, which should not be.
    values are assigned to these fields because of controller context field values, once the values are populated these values are assigned everywhere where istle feild referring to.
    How to keep the user input without changes?
    Thanks!

    Naveen,
    You set contradictory requirements: on one hand you have mapping, where values are always synchronized; on other hand you whant them to be unique.
    Just break your existing mappings.
    1. Create separate attributes in view context(s) if you do not need to access them in component controller or you do not need to be synchronized between views.
    2. Create unique set of attributes in component controller for combination of attributes that really must be synchronized. Then map view context attributes accordingly.
    VS

  • Clearing the data buffer from the input fields

    Hi,
    I am using an user exit CONFPP02 for the Tcode: co11n. I have written a program such that the confirmation numbers having the status CNF will not be allowed to be processed. The whole confirmation is terminated when the system checks the confirmation number and its status as CNF. If the status of the confirmation number is PCNF, the program allows the further processing of the Tcode Co11n.
    The problem starts when the user enters the PCNF status confirmation number and enters, the system stores the values in the various input fields. Now without exiting the initial confirmation screen, if the user replaces the Confirmation number of the PCNF status to the Confirmation number of the CNF status , the system issues a warning message:"  Confirmation no. or order/sequence/operation has been changed
    However, the input fields still contain default values from thepreceding confirmation". if the user says yes, the program written is bypassed , thus allowing the reconfirmation of the CNF confirmation number  into PCNF confirmation number .
    Can anybody suggest a suitable method to clear the data stored defultly in the input fields so that the program can be made to work.
    With regards,
    Avinash.S
    Mobile no:09996192456

    Hi Gilad,
    I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
    I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
    My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
    I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
    But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

  • Changing color of  text in the input field

    hi
    when i disable the input field , the text written in it has very light color. How can i change the color of the displayed text in the input field.

    Hi Harsimran,
    changing the text color of an input field is not possible. However, you can build a workaround:
    1. take an expression box, place it exactly over your input field
    2. change its text color and take the value of your input field as value being displayed
    3. instead of making your input field disabled, make it hidden and show the expression box instead.
    Thus, instead of enabling/disabling your input field, switch between expression box/input field to be displayed. I hope it's clear what I mean. If not, don't hesitate to ask again.
    Best regards,
      Benni

  • How can we change the input field on a view stop showing zeros

    Hello,
           To make screen look consistent with other character input field. How can we change the input field on the view stop displaying zeros even though the data type is NUMC and data type should not be change?
    Edited by: sap_learner on Mar 25, 2010 5:44 PM
    Edited by: sap_learner on Mar 25, 2010 5:49 PM
    Edited by: sap_learner on Mar 25, 2010 5:55 PM

    hello Manas Dua,
                           Thanks for your help. I am able to resolve my problem.
    My code will help  the future comers to resolve this kind of issues.
    *The code is applied to method WDDOINIT of the default view.
      DATA lo_nd_terms_input    TYPE REF TO if_wd_context_node.
      DATA lo_nd_terms_input_i TYPE REF TO if_wd_context_node_info.
      DATA lv_zeros             TYPE wdy_attribute_format_prop.
      lv_zeros-null_as_blank = 'X'.
      lo_nd_terms_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
      lo_nd_terms_input_i = lo_nd_terms_input->get_node_info( ).
      lo_nd_terms_input_i->set_attribute_format_props(
        EXPORTING
          name              = `ENTER THE ATTRIBUTE NAME`
          format_properties = lv_zeros     ).
    Edited by: sap_learner on Mar 26, 2010 5:02 PM

  • Not able to display the values in the input fields of the view

    Hi All.
    I am facing an unique issue.
    My custom element created in my custom node getting a null value
    from a Get Vendor Details RFC written in RFC.
    The values are getting populated in the custom element but not coming in the
    input field of the corresponding view.
    Then, I wrote this code
    wdContext.nodeCustom.setLeadSelection(1);
    and all the output came in the input field.
    Now, after a build it is not coming in the input fields of the view.
    All my custom nodes are Singleton and values are coming in the custom elements
    as I can print them by wdComponentApi.getMessageManager.reportSuccess(""+customnode.getField());
    All my nodes are Singleton.
    Please give your valuable inputs.
    Regards
    Kaushik Banerjee

    Hi
    Check the node property
    initializeLeadSelection     true
    if not make it true , I would suggest to make a value node of the same structure as in RFC after execuation of the RFC populate the value manually.Dont bind it directly to the UI element.
    BR
    Satish Kumar

  • How can I clear the description field of ALL my bookmarks at once?

    Hello,
    I would like to clear the description field of all my bookmarks. To do this manually would be horrible. Is there some tool that can do it? Or is there some trick to edit the sqlite file?
    Also I'd be interested how I can stop Firefox from filling the description field when adding a new bookmark.
    Thank you in advance
    using Firefox 3.6.13 on Windows XP SP3

    Same poster asked same question and received answer on the Mozillazine forum: http://forums.mozillazine.org/viewtopic.php?f=38&t=2057513
    <br />
    '''foxfrog: Other issues that need your attention'''
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

  • In BSP how to give the input field as mandatory?

    Hi friends,
    In BSP how to give the input field as mandatory?
    In BSP i want to validate the input field (example checking the material no is valid or not)
    if this material no doesnot exit means i want to pass error message.What is the code for that.
    Moosa

    hi
    try this
    in LAYOUT
    <htmlb:inputField id = "vname"  disabled = "False" value = "<%= v_visitor %>"/> <font color="red" size="2"><b><%= page->messages->assert_message( 'vname' ) %></b></font></td>
    in DO_HANDLE_EVENT
    in oninputprocessing
    CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
    IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
      DATA: event TYPE REF TO CL_HTMLB_EVENT.
      event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
      IF event->name = 'button' AND event->event_type = 'click'.
        DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
        button_event ?= event.
      ENDIF.
        case event->id.
            when 'select'.
               if v_visitor = ''.
                 page->messages->add_message(
                 condition = 'vname'
                 message   = 'Visitor Name can not be blank'
                 severity  = page->messages->CO_SEVERITY_ERROR ).
              ELSE.
                    here u can write ur when ur field getting filled
            endif.
         endcase.
    endif.
    give marks if it is helpful
    thanks

  • The list doesn't appear in the input field

    Hi All
    The list doesn't appear in the input field when I make input or press the BACKSPACE key.
    Notes:
    I made this modifications:
    1. In connection properties I set High speed connections (LAN)
    2. In local data settings I set the historial to ON
    we had SAPGUI 620 in workstations and now we have installed SAPGUI 710
    Thanks for your time and help
    Message was edited by:
            Genner Sanchez

    Hello Genner,
    see note 399180:
    o  FIELD NAME LENGTH
       The history is only written for field names with a maximum length
       of 40 characters. In earlier SAP GUI versions, this length was
       restricted to 30 characters. The history file must be deleted to
       achieve extended support.
    o  FIELD LENGTH
       If the length of the input field is 60 or more characters,
       history is not written either. "Input field length" refers to the
       dictionary length of the field, not to the "visible length" on
       the screen. (The restriction of the input data to 60 characters
       results from the fact that text editors were often built as lists
       of text fields with a length of 60 in the past. In those editors,
       this history was quite annoying.  On customer request, this was
    Regards, Martin

  • How to keep the input field from PDF Form to RTF

    Hi,
    I'm looking to keep the input fields from my pdf form document to Rtf so I can use them in my Rtf document.
    Regards,
    Alan

    Good day Alan,
    I'm afraid that's not possible as form fields in a PDF file have no equivalent either in a Word format (.docx/.doc) or within the Rich Text Format (.rtf).  That data is simply stripped during the conversion as there's no equivalent available.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

    How to enable/disable the input fields based on the data entered in the web dynpro application abap?  If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

    Hi,
    Try this code.
    First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
    Next go to Init method.
    Set the readonly value as 'X'.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
         DATA ls_context TYPE wd_this->element_context.
         DATA lv_visible TYPE wd_this->element_context-visible.
    *   get element via lead selection
         lo_el_context = wd_context->get_element( ).
    *   @TODO handle not set lead selection
         IF lo_el_context IS INITIAL.
         ENDIF.
    *   @TODO fill attribute
    *   lv_visible = 1.
    *   set single attribute
         lo_el_context->set_attribute(
           name =  `READONLY`
           value = 'X').
    After that Go to the Action  ENTER.
    First read the input field ( first input field, which is value entered field) , next give a condition
    if input value is not initial  then set the readonly value is '  '.
    DATA lo_nd_input TYPE REF TO if_wd_context_node.
         DATA lo_el_input TYPE REF TO if_wd_context_element.
         DATA ls_input TYPE wd_this->element_input.
         DATA lv_vbeln TYPE wd_this->element_input-vbeln.
    *   navigate from <CONTEXT> to <INPUT> via lead selection
         lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
    *   @TODO handle non existant child
    *   IF lo_nd_input IS INITIAL.
    *   ENDIF.
    *   get element via lead selection
         lo_el_input = lo_nd_input->get_element( ).
    *   @TODO handle not set lead selection
         IF lo_el_input IS INITIAL.
         ENDIF.
    *   get single attribute
         lo_el_input->get_attribute(
           EXPORTING
             name =  `VBELN`
           IMPORTING
             value = lv_vbeln ).
    if lv_vbeln IS not INITIAL.
        DATA lo_el_context TYPE REF TO if_wd_context_element.
        DATA ls_context TYPE wd_this->element_context.
        DATA lv_visible TYPE wd_this->element_context-visible.
    *  get element via lead selection
        lo_el_context = wd_context->get_element( ).
    *  @TODO handle not set lead selection
        IF lo_el_context IS INITIAL.
        ENDIF.
    *  @TODO fill attribute
    *  lv_visible = 1.
    *  set single attribute
        lo_el_context->set_attribute(
          name =  `READONLY`
          value = ' ' ).

  • How to change the input field's color in SE51

    Hi:
    I need to change the color of input fields in module pool.
    I tried to modify its screen-color but it did not work.
    Need your suggestion.
    Regards
    Shashi

    hi,
    Check this similar thread
    Regarding the input field color
    thanks

  • Issue with clearing the LOV field

    Hi,
    Could someone please help me with the code to reset/clear the value of an LOV field.
    I have a messageChoice and an LOV on the page. My requirement is that when a value is selected from the messageChoice, the value populated in the LOV field needs to get cleared.
    I have defined a PPR event for the messageChoice bean and I am handling it in the PFR of the CO.
    However, the below code does not clear the LOV field.
    lovBean.setValue(pageContext, null);
    lovBean.setText(pageContext, null);
    If I add the statement lovBean.setText(""), then the value selected from the LOV window does not get populated in the LOV field in the base page.
    The LOV is based on a VO and has just a single result mapping defined.
    Thanks.

    As per OAF standards, you cannot set a bean value in process form request, i.e. methods like
    lovBean.setValue(pageContext, null);
    lovBean.setText(pageContext, null);
    You can clear LOV using either of the ways:
    1)Redirect the flow to process request from process form request,i.e redirect to same page and then set value using
    lovBean.setText(pageContext, null
    2) in process form request , get the VO row attached to the LOV and update the corresponding attribute value as null.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • To find the input fields for the given technichal names .

    Hi ,
    This is for the transaction SU01.
    I have some technichal names for some fields in this transaction,
    CODVN
    BCODE
    GUIFLAG
    LIC_TYPE
    REF_USER.
    I want to find out the input fields in this transaction which correspond to the respective technichal names mentioned above.
    How should i do it?

    Hi,
    Go to SU01 Tcode and press F1 on the fields you get the Pop-up and then click on the Technical Information...you can find the details of the fields,.....

  • How to make the input field of an uplaod button to readonly

    Hi all,
              I have to upload an excel file using upload button.But the problem here is i want the user to use only browse button to upload a file..but he should not enter mannulally in the input field.Is it possible to gray out the input filed but the browse button should be in active state.
    Regards
    Padma N

    Hi,
    I dont think you can make the readonly only for the inputfield which is part of the FileUpload UI.
    I guess your issue is related with user entering invalid urls and system hangs.
    Regards
    Ayyapparaj

Maybe you are looking for