Clearing the report viewer

How do you clear the report in VB.NET Crystal Report viewer to load a new report?  I have a report open in the viewer but i can't find anyway of getting rid of it.

Hi, I have just cleared my crystal report viewer as follows:
crvThisReport.ReportSource = Nothing
crvThisReport.ParameterFieldInfo.Clear()
Hope this helps.

Similar Messages

  • Second Printed Page of a Report Is Corrupted As Well the Report View When Focus Is Returned To It

    I am having a problem with a report in Access 2010. The report detail has a linked subreport in it. I build a query dynamically for both the report and subreport. There is a form that builds the queries and then displays the report in Report View. Everything
    is displayed correctly. In this view I have a command button that will print the report using “DoCmd.RunCommand acCmdPrint.”The printed report’s first page is correct. The second page has #error for all the fields for next record detail and that is it. At
    this point, there are still multiple records to print. When focus is returned to the Print View, it is corrupted and usually freezes.
    If after the Report View is displayed, I right click on the header and choose to display the Print Preview, all pages are displayed correctly. If I right click again, and select print, all pages are printed correctly, and the Report View is not corrupted.
    To see if I had corrupted the database, I imported everything into an empty database. After compiling the code, the behavior did not change at all.
    Once I place the database into production, everything will be driven by command buttons on the forms and reports so the left-click drop-down menus or any ribbons will not be available.
    Does anyone know what is happening?
    Thanks, in advance.

    Hi Ray,
    I failed to reproduce this issue in my test environment (Access 2013).
    Steps:
    #1 Create a table with the attachment field, add multiple records
    #2 Create a report with the table
    #3 Click Print Preview of the report, it worked correctly
    Can you also reproduce this issue in a newly created database, if no, I will suspect that issue is related to the specific database file (data issue or database is corrupted). You could use the link below to compact and repair the database.
    Compact and repair a database
    If the methods above do not work, it would be helpful if you could share us a simple demo to reproduce this issue. Due to privacy issues, I will also suggest you submitting a professional support incident to get the 1-1 support service so that Microsoft
    engineers can work closely with you to resolve this issue.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Using MS Access to Pull Up the Report Viewer - Crystal Reports 2008

    We recently purchased Crystal Reports 2008 Developer so that we can create standardized and feature rich reporting solutions for our company. Many of our current applications are developed in MS Access XP. It has been quite some time since I have worked in Crystal Report and it seems a lot has changed.
    One thing I remember is that there was an ActiveX control that could be added to an Access application, giving the application the ability to pull up a report in a separatre Crystal Viewer. I am having difficulties is finding an object in Access for Cyrstal Reports 2008 (Crystal 12) for the Report Viewer. Is there still such an ActiveX object available for MS Access applications?

    Thanks. I got it now.
    Now my problem is getting the crpe32.dll registered. I keep getting an error and the CrystalVCL example application fails due to not beign able to fnd the correct version.
    You'll have to treat me like I'm stupid on this one. I usually work in the over simplified Access application "development". So dealing with any real object oriented environment and any complex dll registering is a bit beyond me at this point. But I'm learning.
    I have two crpe32.dll's on my computer one is in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
    And another is in C:\Program Files\Common Files\BusinessObjects\3.0\bin
    I have tried registering both of these and neither one will work. So, maybe that means that the're not supposed to be registered through regsvr32?

  • Add columns in DataGridView And display it in the report Viewer at RunTime

    Hello Everyone , this is my first participation here, I am civil Engineer and I have a Question 
    I created dataGridViewer connected to a database , when I change the records and reopen the application the changed are saved However , I let the user to add/delete columns during the runtime (by using sql command) ,even though those columns are saved and
    appear at datagridviewer 
    The reported Viewer (which i designed using wizard) is not showing these columns
    what should i do , I have been trying to solve this for a week ! could it be a year ? !  
    I am using c# visual studio 2012 

    Hi Azzam,
    According to your description, you want to display changed columns in ReportViewer control. Right?
    In Reporting Services, when we retrieve the data, the query or stored procedure will only execute one time. So during runtime, the data in a report will not change. So we can't display the changed columns in report during runtime. However, we can set the
    Auto-refresh properties for report so that the report can refresh every X seconds. This is the most effective workaround. Please refer to links below:
    SSRS report auto refresh
    Automatically refreshing your SQL Reporting Services reports with the AutoRefresh element
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • OBIEE 10g - Unable to see data in the report view with grand total applied

    Hi,
    We're facing with a strange issue.
    We're working on a report view.
    We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
    Please help.
    Thanks in advance.
    -Rama

    Hi Dpk,
    Thanks for your reply.
    I included it in the instanceconfig.xml, but the issue still exists.
    Couple of Observations
    #1 - We noticed this issue when we drill down to the level which has really sparse data.
    It works fine when we look at the enterprise wide report.
    #2 - Works fine with few dimensional attributes and facts on the report
    When we add a fact that doesn't have any value at that level, the issue starts to appear.
    Thanks in advance.
    -Rama

  • Closing the Report Viewer causes the application to hang

    Hi,
    Since a few days we are experiencing some problems with the Crystal Reports viewer. When closing a report viewer in our application, the application hangs for a few minutes. The strange thing is, that it only seems to happen on Windows 7 and Windows 2008 R2 Server.
    Our application with the integrated Crystal Report Viewer is running on 2 application servers :
    - Windows 2008 Server, versie 6.0 Build 6002, Service Pack 2
    - Windows 2008 R2 Server versie 6.1, Build 7600
    Crystal Reports version installed on both servers : 12.01.0007.1144
    On the 2008 Server, the application works correctly.
    On the 2008 R2 server, the application hangs for about 5 minutes while closing the report preview window.
    Both server have exactly the same version of Crystal Reports and the same application version.
    I'm having the same issue on a Windows 7 x64 (6.1 Build 7600).
    I've installed all updates and hotfixes up to SP3 Fix Pack (12.3.3.812 / 12.3.2003.812) but I'm still having the same problem.
    We didn't have this problem until a few days ago, so I assume it has something to do with a windows update which only affects Windows 7 and Windows 2008 R2.
    Please advice us with a possible workaround, because our application is distributed to a few thousand users ...
    Some more debug info :
    This is the call of from the main thread when the application hangs :
         [Managed to Native Transition]     
    >     mscorlib.dll!System.__ComObject.ReleaseSelf() + 0x5 bytes     
         mscorlib.dll!System.Runtime.InteropServices.Marshal.ReleaseComObject(object o) + 0x8b bytes     
         CrystalDecisions.Shared.dll!CrystalDecisions.Shared.SharedUtils.ReleaseComObject(object obj = {CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass}) + 0x75 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose(bool bDisposeManaged = true) + 0x1a2 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose() + 0x32 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.DisconnectEventRelay() + 0xfc bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.InternalClose(bool bSetupForNextReport = false, bool bAutoClose = true) + 0x10e bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(bool bDisposeManaged = true) + 0xad bytes     
         System.dll!System.ComponentModel.Component.Dispose() + 0x12 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.ClearCache(bool clearDocument = true) + 0x9d bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.InternalClose(bool bSetupForNextReport = true) + 0x81 bytes     
         CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.Close() + 0x3f bytes     
         SyDelSoftControlLibCrystalReports.dll!SyDelSoft.ControlLib.CrystalReports.cReportForm.Dispose(bool disposing = true) + 0x55 bytes     
         SDProjects.exe!SDProjects.GUI.ReportForm.Dispose(bool disposing) + 0x38 bytes     
    SharedUtils.ReleaseComObject
    Kind regards,
    Frederic Hoornaert

    CrystalReportsDisposeIssue.crpe.Diagnostics.0.log
    --> Form3 closed
    ..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:17"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"7"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"6"
    N/A:-1,Closing engine,Elapsed Time,"2"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"6"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"5"
    N/A:-1,Closing engine,Elapsed Time,"2"
    --> Form2 closed
    ..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:52"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:52"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"4"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"3"
    N/A:-1,Closing engine,Elapsed Time,"2"
    --> Form1 closed..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:40:29"
    N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"2"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"1"
    N/A:-1,Closing engine,Elapsed Time,"2"
    ..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
    ..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"1"
    ..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"0"
    N/A:-1,Closing engine,Elapsed Time,"100017"
    CrystalReportsDisposeIssue.crpe.functions.0.log
    0xfb8     17:39:17.871          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>     IN          21     <==
    0xfb8     17:39:17.871     0     0     PESetUserSessionInfo               0     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>          21     <==
    0xfb8     17:39:17.874          3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     jobN:3     IN          22     <==
    0xfb8     17:39:17.874     36     3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     OUT     jobN:3          22     <==
    0xfb8     17:39:17.913          0     PECloseEngine               0     void     IN          22     <==
    0xfb8     17:39:17.913     3     0     PECloseEngine               0     OUT     void          22     <==
    0xfb8     17:39:17.923          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:39:17.923     3     0     PECloseEngine               0     OUT     void          0     <==
    0xfb8     17:39:52.421          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>     IN          0     <==
    0xfb8     17:39:52.421     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>          0     <==
    0xfb8     17:39:52.423          1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     jobN:1     IN          0     <==
    0xfb8     17:39:52.423     15     1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     OUT     jobN:1          0     <==
    0xfb8     17:39:52.441          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:39:52.441     3     0     PECloseEngine               1032     OUT     void          0     <==
    0xfb8     17:40:29.281          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>     IN          0     <==
    0xfb8     17:40:29.281     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>          0     <==
    0xfb8     17:40:29.283          2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     jobN:2     IN          0     <==
    0xfb8     17:40:29.283     24     2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     OUT     jobN:2          0     <==
    0xfb8     17:40:29.310          0     PECloseEngine               0     void     IN          0     <==
    0xfb8     17:40:29.310     2     0     PECloseEngine               1032     OUT     void          0     <==
    0x1568     17:40:29.315          0     PECloseEngine               0     void     IN          0     <==
    0x1568     17:40:29.315     100018     0     PECloseEngine               0     OUT     void          0     <==

  • Help neede very very urgently ... to clear the report from Cache.....

    Hello all,,,
    In my project iam using crystsal report for eclipse to generate reports.
    Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
    The name of my jsp page is poi.jsp
    The name of my Crystal report is CrystalReport2.rpt
    My problem is this....
    when i run the report first time i can see my poi.jsp page and user can submit
    the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)
    but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp)
    rather its showing the old generated report.
    When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page
    but the problem is when the user clicks on the print icon or any icon on the report its just
    showing the poi.jsp page...
    When the user closes the report or when the clicks on the button to generate the report it should
    show the parameter page (poi.jsp).how can i solve this problem???
    the code what iam using is as follows..( got it from the examples of CRE - database login )
    Object reportSource = session.getAttribute("reportSource");
    if (reportSource == null)
    String report = "CrystalReport2.rpt";
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(report, 0);
    reportSource = reportClientDoc.getReportSource();
    session.setAttribute("reportSource", reportSource);
    ConnectionInfos connInfos = new ConnectionInfos();
    IConnectionInfo connInfo1 = new ConnectionInfo();
    connInfo1.setUserName("USER");
    connInfo1.setPassword("USER");
    connInfos.add(connInfo1);
    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setReportSource(reportSource);
    viewer.setEnableLogonPrompt(false);
    viewer.setDatabaseLogonInfos(connInfos);
    if (session.getAttribute("refreshed") == null)
    viewer.refresh();
    session.setAttribute("refreshed", "true");
    viewer.setOwnPage(true);
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
    //session.removeAttribute("refreshed");
    //session.invalidate();
    thanks in advance
    regards
    jack

    As far as parameter refresh is concerned add in your code
    viewer.setHasRefreshButton(true)
    refresh button is appeared on crystal report toolbar and you can use this button instead of explorer refrsh button and every time you can add new parameters values.
    Also, if you want to update reportsource in session object. means if user wants to view more than one different reports and want to invalidate reportsource form session.
    add in jsp.
    session.removeAttribute("reportSource");
    Happy programming
    Uzma

  • How to clear the report from Cache.

    Hello all,,,
    In my project iam using crystsal report for eclipse to generate reports.
    Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
    The name of my jsp page is poi.jsp
    The name of my Crystal report is Department.rpt
    My problem is this....
    when i run the report first time i can see my poi.jsp page and user can submit
    the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)
    but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp)
    rather its showing the old generated report.
    When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page
    but the problem is when the user clicks on the print icon or any icon on the report its just
    showing the poi.jsp page...
    When the user closes the report or when the clicks on the button to generate the report it should
    show the parameter page (poi.jsp).how can i solve this problem???
    the code what i am using is as follows
    try {
              String reportName = "C:/workspace/Reports/WebContent/Department.rpt";
              ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
              if (clientDoc == null) {
                   // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
                   // tag can be removed to open the reports as Java resources or using an absolute path
                   // (absolute path not recommended for Web applications).
                   clientDoc = new ReportClientDocument();
                   clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
                   // Open report
                   clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
                   // ****** BEGIN SET RUNTIME DATABASE CREDENTIALS **************** 
                        String connectString = "jdbc:oracle:thin:@192.168.1.4:1521:orcl";
                        String driverName = "oracle.jdbc.driver.OracleDriver";
                        String JNDIName = "orcl";
                        String userName = "act_db";               // TODO: Fill in database user
                        String password = "act_db";          // TODO: Fill in password
                        // Switch all tables on the main report and sub reports
                        CRJavaHelper.changeDataSource(clientDoc, userName, password, connectString, driverName, JNDIName);
                        // logon to database
                        CRJavaHelper.logonDataSource(clientDoc, userName, password);
                   // ****** END SET RUNTIME DATABASE CREDENTIALS ****************           
                   // ****** BEGIN CONNECT PARAMETERS SNIPPET ****************          
                        // STRING VALUE PARAMETER. 
                        String stringValue = request.getParameter("DeptId");;     // TODO: Fill in value
                        CRJavaHelper.addDiscreteParameterValue(clientDoc, "", "DeptId", stringValue);
                   // ****** END CONNECT PARAMETERS SNIPPET ****************     
                   // Store the report document in session
                   session.setAttribute(reportName, clientDoc);
              // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** 
                   // Create the CrystalReportViewer object
                   CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
                   String reportSourceSessionKey = reportName+"ReportSource";
                   session.removeAttribute("reportSource");
                   Object reportSource = session.getAttribute(reportSourceSessionKey);
                   if (reportSource == null)
                        reportSource = clientDoc.getReportSource();
                        session.setAttribute(reportSourceSessionKey, reportSource);
                   //     set the reportsource property of the viewer
                   crystalReportPageViewer.setReportSource(reportSource);
                   crystalReportPageViewer.setDisplayGroupTree(false);
                 session.removeValue("reportSource");
                   crystalReportPageViewer.setHasRefreshButton(true);
                   // Apply the viewer preference attributes
                   // Process the report
                   crystalReportPageViewer.processHttpRequest(request, response, application, null);
              // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************          
         } catch (ReportSDKExceptionBase e) {
             out.println(e);
    Thanks In advance
    Regards,
    Amol Patil

    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setReportSource(reportSource);
         viewer.setReportSource(reportSource);
         viewer.setHasRefreshButton(true);
         viewer.setOwnPage(true);
         viewer.setOwnForm(true);
         viewer.setHasExportButton(true);
         viewer.setZoomFactor(100);
         viewer.setPrintMode(CrPrintMode.ACTIVEX);
        viewer.setParameterFields(fields);
    viewer.setEnableParameterPrompt(true); --this line will prompt

  • Clearing the report from cache....

    Hello all,,,
    In my project iam using crystsal report for eclipse to generate reports.
    Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
    The name of my jsp page is poi.jsp
    The name of my Crystal report is CrystalReport2.rpt
    My problem is this....
    when i run the report first time i can see my poi.jsp page and user can submit
    the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp) rather its showing the old generated report.
    When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page but the problem is when the user clicks on the print icon or any icon on the report its just showing the poi.jsp page...
    When the user closes the report or when the clicks on the button to generate the report it should show the parameter page (poi.jsp).how can i solve this problem???
    the code what iam using is as follows..( got it from the examples of CRE - database login )
              response.setHeader("Cache-Control","no-cache");
              response.setHeader("Pragma","no-cache");
              response.setDateHeader("Expires",-1);
              response.setHeader("Cache-Control","no-store");
              Object reportSource = session.getAttribute("reportSource");
            if (reportSource == null )
                String report = "CrystalReport2.rpt";
                ReportClientDocument reportClientDoc = new ReportClientDocument();
                reportClientDoc.open(report, 0);
                reportSource = reportClientDoc.getReportSource();
                session.setAttribute("reportSource", reportSource);
            ConnectionInfos connInfos = new ConnectionInfos();
            IConnectionInfo connInfo1 = new ConnectionInfo();         
            connInfo1.setUserName("CS22USER");
            connInfo1.setPassword("CS22USER");
            connInfos.add(connInfo1);
            CrystalReportViewer viewer = new CrystalReportViewer();
            viewer.setReportSource(reportSource);          
              viewer.setEnableLogonPrompt(false);
            viewer.setDatabaseLogonInfos(connInfos);
            if (session.getAttribute("refreshed") == null)                  
                 viewer.refresh();               
                 session.setAttribute("refreshed", "true");           
                 //response.sendRedirect("Test.jsp");
                  //session.removeAttribute("refreshed");    
                  //session.invalidate();
                  //session.removeAttribute("refreshed");       
            viewer.setOwnPage(true);
            viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);                     
            //session.invalidate();

    CrystalReportViewer viewer = new CrystalReportViewer();
    viewer.setReportSource(reportSource);
         viewer.setReportSource(reportSource);
         viewer.setHasRefreshButton(true);
         viewer.setOwnPage(true);
         viewer.setOwnForm(true);
         viewer.setHasExportButton(true);
         viewer.setZoomFactor(100);
         viewer.setPrintMode(CrPrintMode.ACTIVEX);
        viewer.setParameterFields(fields);
    viewer.setEnableParameterPrompt(true); --this line will prompt

  • Everything works except viewing a report *in* the Report Viewer web part

    Hello!
    I'm having an issue with the SharePoint 2007 PIK where the following works fine...
    1. Adding the Document List to the web page and clicking a report to view it in a new browser window
    2. Adding a Document View web part and pointing it to a Document on the BOE server repository views fine in the Doc View web part
    However, when I try to use the Crystal Report View web part, click Edit, and Browse to select a report to view, it selects it fine but does not display it. Instead I get this error:
    Report cannot be displayed because no report processing server is available. Please try again later or contact your BusinessObjects Enterprise administrator.
    It setting up a connection between the Document List and Crystal Report View also gives the same error when a report is selected by the end user.
    Any ideas what I can check? Do I have to install the BOEXIR2 web components on this SharePoint server too?
    Right now it just has the BOE .NET SDK and SharePoint PIK. The full BOE XI R2 server that I'm calling is on another computer.
    Thanks!
    Horus

    Ok, got this to work finally. The virtual directory steps were helpful but I still got broken links on my images.
    I tried right clicking the toolbar and report images in the browser and found the URL. Then I just entered that URL in the browser. This helped a bunch since at least I had a new error to research.
    Server Error in '/crystalreportviewers115' Application.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Cannot use 'partitionResolver' unless the mode is 'StateServer' or 'SQLServer'.
    Googling this lead me to a tip to add a sessionState key in my X:\Program Files\Business Objects\common\3.5\crystalreportviewers115\web.config file as follows:
    <sessionState mode="SQLServer" timeout="60" allowCustomSqlDatabase="true" partitionResolverType="Microsoft.Office.Server.Administration.SqlSessionStateResolver, Microsoft.Office.Server, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    After this my buttons and images worked. I'm not sure if your config is different but as a beginner with this stuff myself hopefully this works for you.
    Horus

  • Clearing the Sequence View Display

    We are using a LabView UI to the TestStand engine.
    When a test is completed the the UI Sequence View background colour changes from white to grey and the results of the test remain in the View, does anyone know how to clear the View?
    Regards
    Steve
    There are 10 types of people in the world that understand binary, those that do and those that don't.

    Steve,
    You could set the ExecutionView Manager's  Execution property  to NULL every time an execution ends. In this way the execution view would be 'cleared'.
    If you want to modify the LV Full Featured Operator Interface to handle the Application Manager's EndExecution callback follow the following steps.
    1.Use LabVIEW to  open TestStand\OperatorInterfaces\NI\FullFeatured\LabVIEW\TestExec.llb.
    2. Select Full OI - Configure Event Callbacks.vi.
    3. Open the block diagram and add anew callback to the reg event callback node.
    4. Connect the Application Manager branch to the event source ref input.
    5. Select EndExecution form the callback list.
    5. Pass the Execution View Manager Reference as the User Parameter.
    6. Create a new Callback VI and name it END EXE CBACK.
    7. Inside the callback VI set the IExecutionVIewManager Execution property to NULL.
    Hope it helps.
    If you have any question let me know.
    Antonio Lie.

  • Has the report viewer refresh functionality gone away?

    When we click the refresh button in the DHTML report viewer nothing happens. We are on BOE XI R 3.1. Has this functionality changed since XI R2?

    Hi,
    that functionality is still the same in the combined InfoView assuming you are using SAP authentication.
    Ingo

  • What does the report viewer look like

    Ok, this is a stupid question, but I've been staring at the screen for 15 minutes and I'm stumped. I'm in Visual Studio 2010/VB.Net and I've created my first CR report in VS. I'm reading some step-by-step instructions for dummies on how to view the report at run-time. It says, "Select the default form (Form1.vb) you created in VB.NET and drag a button and CrystalReportViewer control to your form."
    So where the heck in the CrystalReportView Control. When I right-click on the toolbox and chose add items I can see the there is a CrystalDecisions.Web and 1 for CrystalDecisions.Windows.Forms, along with a number of other CR namespaces. I can't see them in my toolbox, though. There are no CR objects in the toolbax. What are they labeled as? If I uncheck them and the chose add items again and re-check them nothing changes. Under the section of the toolbax all I have is the Microsoft.Reporting.WinForms.ReportView. There is no CR report viewer.
    What section of the toolbax should the CR report view be under?
    Greg

    Hi Greg,
    You may check following
    [.NET Framework Client Profile|http://msdn.microsoft.com/en-us/library/cc656912.aspx]
    [1544669 - The CrystalReportViewer control is missing from the Visual Studio 2010 toolbox|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343334333633363339%7D.do]
    Thanks,
    Saurabh

  • Not able to view the values on the report viewed using Query Report Viewer

    Hi all,
    There seems to be some unknown problem with the Report Template I have prepared and uploaded on PIA XML Publisher. When I run it with some ID set, it doesn't seem to show the values from the Data I give. For example if I have a field called ChartField in my report Template, It doesn't seem to get populated when I do SetID.
    Why is it so?

    Hi all,
      select bdmng from resb into corresponding fields of table it_stpo2
                for all entries in it_stpo
                 where matnr = it_stpo-idnrk
                 and xloek ne 'X'.
      loop at it_stpo2.
        move-corresponding it_stpo2 to it_stpo.
        append it_stpo.
      endloop.
    In the above code, m able to fetch the records in the table it_stpo2. but the data is not gettin populated in the final internal table it_stpo. Both the internal tables it_stpo & it_stpo2 are same.
    The data is gettin moved from it_stpo2 to it_stpo but only upto the header level. its not gettin appended in the table it_stpo even after using append stmt.
    Plz help me to resolve this issue. its urgent.
    Rgds,
    Purva

  • Toolbars in the report view take a lot of the screen space as each button takes a line

    I created a report which looks fine in the BIDs but as soon as I upload it to the Report server and open it with the IE the toolbars take much of the screen space as each button (Export, Refresh and save) take a line. how can I change the configuration so
    that all buttons will appear in one line (or will not appear at all)?
    I'm sure it is something to configure in the server side as in whichever IE I open the report, from different computers, I always get it the same

    Hi,
    I would ask the following questions to verify the issue:
    1. Does the issue happen on all the reports?
    2. Does the issue persist if you open it in the other web browsers?
    2. What’s the version of your Reporting Service and Internet Explorer?
    Please post the image of the issue, so we can understand the problem in more details.
    You can use &rc:Toolbar=false parameter to hide the toolbar in the Report Server.
    The following articles are helpful:
    URL Access (SSRS)
    http://msdn.microsoft.com/en-us/library/ms152835.aspx
    SSRS Remove Menu in Web-Page
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a6f2899b-a8bb-41a2-880c-0b302907161c/ssrs-remove-menu-in-webpage
    Thanks.
    Tracy Cai
    TechNet Community Support

Maybe you are looking for