Clefs in different places change along with selected!

Logic has been acting up but now when I start a new orchestral score and want to assign an alto clef to the viola track-the bass track changes to alto as well. Any ideas? only the viola track is green=selected, could there be something in the mixer that joins the two together?
Message was edited by: 55plus

Hi
You can change the clef assigned to a Staff Style in "Layout:Staff Styles".
You can add clef changes directly in the score using the different clef signs available in the part box. Drag and drop, pencil tool etc all work here.
HTH
CCT

Similar Messages

DBMS_CDC find only the columns that are changed along with the primary key in the table

Hello,
We are having a requirement to find the change data in the production environment.
We are planning to use the DBMS_CDC utility.
But for example in the create change table 1 picked emp_id,ename, address, salary,dob.
I have a sample data of
empid
ename
address
salary
DOB
1
test1
24 test street
2000
20-Jan-98
2
test2
25 test street
2500
15-Aug-97
if ename for empid 1 is changed to test1_test3 from test1.
My CDC is capturing the values in the old and new values in the 5 columns.
But i need to get only the empid (primary key of the source table) and the ename column as only that's been updated not the rest of the 3 columns.
Can i accomplish this.
Please advice.

Hello,
Thanks for the information.
but if i change the change table then i will miss the other columns right?
I want to get the columns( empid and ename) only if ename is changed. i.e when ever any column in emp table changes i need to get all the columns where the data is changed along with the primary key columns empid.
Is there any way i can tweak the parameters so that i can achieve this or is there any other way using the cdc i can get this data.
Thanks

Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

Hi Experts,
I am bit confused about ISE distributed deployment model .
I have two data centers one is DC & other one is as a DR I have requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
how do i deploy ISE persona for HA in this two data centers
After reading cisco doc , understood that we can have two PAN ( Primary in DC & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
Can anybody suggest me the best deployment solution for this scenario ?
Another doubt about public certificate :
Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
Please do correct me if I am wrong about certificate understanding :
since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

Hi there. Let me try answering your questions:
PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
1. Defining all PSN nodes as AAA radius servers inside the WLC
2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc.
3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
I hope this helps!
Thank you for rating helpful posts!

Print Dialog box has changed along with printing function

I installed the latest update and now when I print there is a new dialog box. The problem is on a multi page job it only pulls a few pages from the paper tray and then makes me use the manual feeder for the remaing pages, All paper sizes of the print job are the same and I only have one tray. I am printing on a Brother MFC 4860N. Any solutions? Thanks

Carolyn -
Thank you for your respose of 5/1/09 -- sorry for the delay in getting back to you.
1.) I tried your suggestion, but the problem is that Apple and HP have worked to include all/most of the HP software into OS X v. 10.4.11 and beyond. I did not find in my user/.../Library/Preferences .plist files directly referencing my HP 990 Cse printer, which was the only printer not displaying the Printer Dialogue Box.
Open your User/..../Library/Preferences to see the list of .plist files for HP and other manufacturers.
The open the [top level] your-hard-drive/library/Printers/HP to see the [root=basic] files which, I believe, are the actual OS X system files which are on the original System CD or are downloaded for the updates.
2.) I finally got the Printer Dialogue Box for the HP 990 Cse to work --
a.) I ran the OS X Printer Setup Utility app.
b.) I then dragged the icon for the HP 990 Cse printer to the trash; and emptied the trasn.
c.) Restarted the OS X.
d.) Ran the OS X Printer Setup Utillity app again
e.) When the HP 990 Cse did not appear in the list of printers I clicked the "Add" icon.
f.) I selected to add the HP 990 to the Printer List
g.) Nothing happened when I tried to access the HP 990 Printer Dialogue Box.
h.) I did a restart.
i.) I then did a print job using the HP 990.
j.) When the HP 990 icon appeared at the right end of the dock, next to the trash, I grabbed it and dragged it to the place in the dock where I wanted it to reside.
IT WORKS JUST GREAT NOW !!!!
Thanks for your help, as you helped me consider the problem at a deeper level.
Samuel

LAN DNS resolution has changed - along with lots of other behaviours

Hi
Last Friday I experienced a lot of strange network/firewall behaviour on my Macs, both running 10.6.7. I don't know what the problem is but am trying to isolate it - or them.
Considering just the MacBook Pro, I have been running the same setup for over a year at different locations and never experienced this before. The MBP is named Isola, it runs Windows XP Pro on VMWare Fusion and MAMP as a development/test environment for websites.
Since I have had this setup, with MAMP running and using the normal Apache and MySQL ports I could connect to websites using Mac browsers on: http://localhost/, if I was testing on Windows browsers I would use http://isola/
This worked at home using an Airport connection over a Netgear modem/router:
TCP/IP
Using DHCP with manual address
IPv4: 192.168.0.5
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Configure IPv6: Automatically
DNS Servers: 192.168.0.1
Search Domains: -
It also worked at the office - 2 Macs networked using a Netgear Gigabit switch, also connected to the building's ethernet system for external internet connection:
TCP/IP
Using DHCP
IPv4: 10.0.21.10
Subnet Mask: 255.255.255.0
Router: 10.0.21.254
Configure IPv6: Automatically
DNS Servers: 10.0.21.254
Search Domains: popcorn
I have two Locations set up in networking preferences, Home and Office. DHCP and DNS at home are provided by my ISP I believe. Apparently the IT infrastructure in the building where my office is located handles the DHCP and DNS.
Since last Friday when I try to connect to http://isola/ using a Windows browser the request either times out (Internet Explorer) or is re-routed to http://www.isola.com (Firefox and some other browsers). In order to the site on my MAMP server I have to use http://isola.local/
I can replicate the same behaviour when trying to connect to the MAMP server using my Mac Pro.
I have flushed both Macs' DNS caches, repaired permissions and tried other stuff which I can't quite remember now. Nothing has made any difference.
I'd really like to know if this new behaviour is likely to be caused by my configuration or the office DNS setup and ideally get it back to what it was before.
Yesterday I started experiencing strange behaviour with the MBP firewall. It may be part of the problem or not - I'll include for information. It has always been on and set up normally - none of the Advanced settings checked. There were a whole load of software listed in the Advanced tab such as Skype, Safari, Opera configured to accept incoming connections. Yesterday for the first time ever I had a whole load of firewall dialogue boxes open on start up asking to allow or block network connections to basic OS X services: AppleFileServer, cups-lpd, cupsd, httpd, krb5kdc, mysqld, nmbd, smbd, vmnet-natd. I think some of these are due to File Sharing and Printer Sharing being enabled in the Sharing Preferences - but they've been enabled for over a year.
Thanks in advance for any advice.

Safari gives the error message
Safari can't open the page "[URL]" because your computer isn't connected to the Internet.
on any attempt to access a page by URL. If I put in an IP address it loads fine (aside from not being able to resolve any links to images, etc. which are linked using a domain name).
nslookup google.com on the command line gives the error:
/SourceCache/bind9/bind9-31/bind9/lib/isc/unix/socket.c:4525: bind: No route to host
nslookup: isc_socket_bind: unexpected error
DNS resolution does not work on Firefox either.
All checkboxes in the System Preferences>Network>Advanced>Proxies tab are unchecked. The box at the bottom ("Bypass proxy settings...") contains:
*.local, 169.254/16
Thanks for trying to help me out! I'm happy to provide any other information that might be useful to you.

How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

How to get terminal address along with Change document header

Dear All
My client want a report of the frequencies of a sales document changes along with terminal address. In table CDHDR i can get user name, date, t-code but not the terminal address. So requesting to guide me of how to get the terminal address from which terminal the document has been updated.
Appropriate answer will be rewarded.
Regards
Kingshuk
Edited by: Kings_Roy on May 31, 2010 11:02 AM

I don't think this information is kept in change documents. So for the change documents that are already created, you cannot get this information.
For future however you can do some code changes to get this information.
Function module TH_USER_INFO can return terminal name as well as IP address for a given client and user.
All you have to do is either store this additional information along with change documents. For this i think you can check the FMs that are writing SD change documents.
OR
You can use user exit exit SUSR0001 (User exit after logon to SAP System) to call this Function (TH_USER_INFO) at user logon and store this info in a Z table. Later when you are reading change documents, you can get user name, date time from change document and search this Z table for respective user Terminal name and IP Address.
This is not a complete solution but i hope it will direct you to a solution.
cheers.

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there. I have changed my email address on my iMac but my old one still remains on the iPad. Also changed password. Nothing works! I can't use the iPad like this!

The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there. I have changed my email address on my iMac and also changed my password. The old email address is still on the iPad. Anyway, I can't use the iPad because can't get the apple id password box to go away. Thanks for any help!

This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

How do you copy and paste track changes material in Pages from one point in a document to another and keep both the old text along with the track changed thus far in the new pasted location?

Depending on whether track changes is on/paused, Pages thinks the pasted material is either all new and thus highlights it as a big track change or just copies the old material along with the edits as plain text so that I cannot see my track changes. I need to be able to copy and paste in the same document and still be able to see the older text along with the changes to certain sections thus far. Is this possible? I need a step-by-step "talk to me like I'm five" instructional if what I would like can be done.
Thanks for any help!
Message was edited by: C.M.W.

What version of Pages?
What OS, iOS or OSX?
Are you sure you have the Table selected and not a cell or just contents?
Peter

LookupCube based on CurrentMember of different dimensions along with date range

Hi,
I want to get a value through LookupCube based on CurrentMember of different dimensions along with a date range. For example, I want to make this happen: LookupCube("TMIClaim","([Measures].[Paid Amount],"+"[Transaction
Date].[Hierarchy].[Day].&[2013-01-01T00:00:00]:[Transaction Date].[Hierarchy].[Day].&[2013-02-01T00:00:00]" +"," + "[Product].[Name].&["+[TMI Product].[Name].CurrentMember.Name+"]" +")")).
It does not work as long as I put the date range.
I cannot use Aggregate either since it does not take multiple dimensions as filter criteria. That means when I use date range for aggregate I cannot use another dimensions as filter.
I am looking for any of the solution which based filter that is combined with a date range and other dimensions.
Thanks,
Mamun

Try using the Sum() function. Something like:
LookupCube("TMIClaim","Sum( ( { "
+"[Transaction Date].[Hierarchy].[Day].&[2013-01-01T00:00:00]:[Transaction Date].[Hierarchy].[Day].&[2013-02-01T00:00:00]
}" +"," + "[Product].[Name].&["+[TMI Product].[Name].CurrentMember.Name+"]"
) , ([Measures].[Paid Amount]," +")
(Check location of parenthesis, but this should point you in the right direction).
This worked for me:
WITH MEMBER MEASURES.LOOKUPCUBEDEMO AS
LOOKUPCUBE("MyCube", "sum({[Date].[YQM].[Day].&[20140330]:[Date].[YQM].[Day].&[20140331]},[Measures].[Row" + " Count])")
SELECT MEASURES.LOOKUPCUBEDEMO ON 0
FROM [MyCube]
Victor Rocca

I changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?

i changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?
i have tried signing out of imessage and signing back in. (when i do that and am asked to select my email adress, i see my new number but it is greyed out and i cant select it)

But under send and receive, my old number is still displayed while my new number isn't.

I have to select a file – get Info – and change – open with and change from preview to another program and CHANGE ALL everytime I boot up

Why do I have to select a file – get Info – select – open with – and change from Preview to another program and click CHANGE ALL with every file extention everytime I boot up.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Itunes was deleted from laptop after changing credit card info and password. How do I get it back along with all songs that was on my account

itunes was deleted from laptop after changing credt card infor and password. How do I get it back along with all of its contents?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

To capture the selected rows along with edited field contents in alv report

Dear All,
         I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
         For example If there are 10 records displayed in the alv output with 20 fields.
Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
      I am using the Func Module 'REUSE_ALV_GRID_DISPLAY'.
      Your early reply with sample code would be appreciated.
Thanks in Advance.

HI Naveen ,
There is an import parameter "i_callback_program" in the function module,
plz pass the program name to it.
Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ". Check the returned command and
and program a functionality as desired.
u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
In case it is , process the code segment.
Regards
Pankaj

Clefs in different places change along with selected!

Similar Messages

Maybe you are looking for