CLF-REG-PROJ

HI Folks
kindly guide me what are the questions we have to ask client before start of the project as technical point of view ie regarding objects and etc..........
plz respond asap
Great thanks,
Nayak

Hi,
Please check more details of the implementation project on Wiki page for SCM-APO
After reading it you will able to get more details.
All the best for your reimplementation project

Similar Messages

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

CJ20N-fields are not getting updated in table PROJ

Hi all,
I have a requirement where I need to transfer the WBS element data created in one system to another using IDOC.
The idoc has generated sucessfully and was also sent/processed successfully in the recieving system but fields STSPD and STSPR are not getting poulated in table PROJ.
In the confic I have assigned FM:IDOC_INPUT_PROJECT to the process code.
Thanks,
Gaurav

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Excise Reg at Depot

Hi all,
We have Excise REg no for Plant. But plant does not have Excise reg no.
Material is shipped to Depot with excise invoice. What is the procedure at depot for GR.
Do i need to capture the excise invoice?. From Depot, there is no excise invoice generated for customers.
thanks.

Hi,
Refer following link;
[J95 - Sales at Depot|http://help.sap.com/bp_bblibrary/500/HTML/J95_SaleDepot_EN_IN.htm]

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
    m_username VARCHAR COLLATE NOCASE,
    m_identity VARCHAR,
    m_updatetime DATETIME,
    PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
    try:
        c = db.cursor()
        c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
        print '\t<update>true</update>'
    except:
        print '\t<update>false</update>'
for f in friends:
    print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
    c = db.cursor()
    c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
    for result in c.fetchall():
        eachIdent = result[1]
        if not eachIdent:
            eachIdent = ""
        print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
        if f != result[0]:
            print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
    print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

Windows Server 2008 R2 SP1 BSOD 0x1a with CLFS.sys

Hello,
I've got a BSOD on a Windows Server 2008 R2 with SP1 installed. Analyzed the dump and could
see a Bug-check of 0x1a which means "MEMORY_MANAGEMENT".
Further analysis on this dump shows me, that this probably is caused by the CLFS.sys, which
is the Common Log File System Driver. This CLFS.sys is installed with date:
Tue Jul 14 01:19:57 2009
I have now searched trough MS Support pages and resources and also the Internet, but I found no
information about an update for this or a newer version. It's nearby impossible to find newer versions
for specific files in i.e. Hot-fixes.
Do you know this issue with the 0x1a BSOD and CLFS.sys and/or do you know a newer version ?
Any help would be very appreciated!
Thanks and regards plus have a nice day !
Tino

Hi Tino,
Regarding to Bug Check 0x1A, please refer to following article.
Bug Check 0x1A: MEMORY_MANAGEMENT
Did you install any third-party application in this problematic server? Would you please let me know whether
the BSOD issue occurred regularly? Or just occurred suddenly? If the BSOD issue occurred regularly, please
perform a clean boot and check if this BSOD issue still exists.
In addition, please check if necessary updates need to be installed and drivers need to be updated. Please
run sfc /scannow command to scan all protected system files and check if find errors.
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Actually, it is not effective
for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
àThis CLFS.sys is installed with date: Tue Jul 14 01:19:57 2009
àor do you know a newer version?
By the way, I checked the CLFS.sys in a Windows Server 2008 R2 in my Lab environment. It also created in July
2009.
Hope this helps.
Best regards,
Justin Gu

I bought an itunes gift card in a different country than my account is reg to, can i use it??

my acc is reg in ireland, i am currently in new zealand and bought a gift card, i cant work out how to use it, help!

You can't.
They are country specific.
You could get a New Zealand address, then get a credit card that is billed to that address, then set up an account in New Zealand, and as long as you are inside the Borders of New Zealand, then you could redeem the card.

How to execute a .reg file in a task sequence using MDT 2013

Hi,
Im trying to add a couple of desktop icons to my custom images during deployment using MDT 2013. I have a .reg file with all commands inside it but I am struggling to get these to work. the .reg file is located on my deployment server and is in a shared
folder which everyone has full read\write access to, I was wondering if someone could help?
The commands inside the .reg file are:
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
Thanks

That's not a *.reg file. that's a set of commands used in a *.cmd file.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Error while compiling : Couldn't allocate output reg for contraint '{ax}'!

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Reg XML generation from java objects using SAX 2.0

i'm using java 1.6 and i've imported following class to generate XML from java objects
import com.sun.org.apache.xml.internal.serialize.OutputFormat;
import com.sun.org.apache.xml.internal.serialize.XMLSerializer;
the following class has been imple her to create a Xml file and tag elements ,
OutputFormat of = new OutputFormat("XML", "iso-8859-1", true);
XMLSerializer serializer = new XMLSerializer(fos, of);
ContentHandler hd = serializer.asContentHandler();
hd.startDocument();
everything works fine but i'm getting warrnin reg the serializer and outputformat
warring is:
com.sun.org.apache.xml.internal.serialize.OutputFormat is Sun proprietary API and may be removed in a future release
com.sun.org.apache.xml.internal.serialize.OutputFormat is Sun proprietary API and may be removed in a future release
HOW CAN I AVOID DS WARRING PLZ HELP REG DS
thanks ,
with regards,
Rajesh.S

I've been having the same problem. Here is what i found:
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6476630]
Hope that helps (or at least helps you feel better).

Windows 7 CLFS.sys Blue Screen

Yesterday I installed Visual Studio 2013 which required a reboot. Immediately after rebooting the system I got a BSOD caused by clfs.sys with error 0x50 and the following message: PAGE_FAULT_IN_NON_PAGED_AREA. I tried LITERALLY everything I found online
(including related topics posted here) but none worked. At this point, I can't even boot to Windows. It immediately crashes on the loading logo.
So I gave up and decided to reinstall the OS. After inserting the bootable USB, I still get the same BSOD!!! I don't understand why this happens
when trying to install a clean version. This didn't make sense to me, so I used Bootable Partition Wizard and completely
wiped out and formatted my C: drive hoping it would at least let me reinstall Windows. Surprisingly that didn't help either. I still get a blue screen when booting into the installation disc.
I'm totally lost at this point. What is going on? How could this possibly happen when booting into the installation disc?? Do I have to do something with the master boot record? Any help would be greatly appreciated.

AM
Could be hardware, MBR/EUFI, a corrupt win 7 image, or many other things. So where are you now? Is there any bootible OS on the system? Have you tried booting into safe mode (F8)?
If you cannot boot you have a brick. If you are comfortable with it you may need to start pulling out hardware to see if you can it to boot in any manner, or perhaps take the HD to another computer, etc.
Should you ever get to where you can boot we need the DMP files to diagnose
We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded,
and what was responsible.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
BCC 50 is usually a driver
Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
The PAGE_FAULT_IN_NONPAGED_AREA bug check has a value of 0x00000050. This indicates that invalid system memory has been referenced
Wanikiya and Dyami--Team Zigzag

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

When the computer was new, I had the same issue I have now. It was new and I could not burn to play on a reg cd player. Today, I can not burn to play on a reg cd player. Inbetween, I could not burn to play on a reg cd player. I keep giving up and then trying months later.
I have recently made the cds that play on the computer. I have also tried in the last month to make a dvd copy, it played. I have gone to people's homes and tried the cd's burned in my computer. They are not recognized. This last round I have only used the cd-r but have tried many others in the past. I am running out of money to keep buying different brands, kinds, etc. I figured it must be my lac of knowledge and am trying to get some new here.
Sincerely,
Paul

CLF-REG-PROJ

Similar Messages

Maybe you are looking for