(Cli 8 ink) Where can I find the list of EVERY single printer that uses Cli 8 ink cartridges?

I purchased a set of Cli 8 cartridges when I owned a MP510 printer, but the printer died.I am now looking to purchase an all-in-one printer that uses the Cli 8 cartridges so the won't go to waste. Or should I just purchase an newer printer model ? I looked on Amazon for printers but none of the printers listed appear to be compatible with the ink.

Hello. Here is a list of printers that used the CLI-8 series ink tanks. Please note, since these printers have been out of production for many years they may no longer be available at most retailers. PIXMA MP600
PIXMA iP6600D
PIXMA MP970
PIXMA Pro9000
PIXMA MP500
PIXMA MP830
PIXMA MP960
PIXMA MP800R
PIXMA MP810
PIXMA MX850
PIXMA Pro9000 Mark II
PIXMA iP4500
PIXMA iP4300
PIXMA iP5200
PIXMA iP6700D
PIXMA MP800
PIXMA iP5200R
PIXMA MP610
PIXMA iP4200
PIXMA MP530 This didn't answer your question or issue? Find more help at Contact Us.

Similar Messages

Where can I find the list of authorized computers on Homesharing?

When I tried to auhorize a new computer on my home sharing network I am told I already have the maximum of 5. When I count on my fingers I can only come up with 4. Where can I find the list so I can deauthorize the one I can't find (and I don't want to deauthorize all of them)

Apple used to allow you to manage this list (way back before "Home Sharing"). However, now you're only allowed to remove all of them at once and add them back one at a time. I had to do this before when I had a hard drive die in an authorized machine (and obviouly couldn't deauthorize it). It can be time comsuming and somewhat problematic if all the machines aren't readily available. Given the options, it's really the only way to get rid of the unwanted ones.
Remember this is only for Computers (Macs/PCs), not i-Devices.
Hope this helps.
-Ric

Where can i find the list of macros

where can i find the list of macros and which macro is used for exception ?

You answered yourself???? :-):-)
Anycase you can refer the pages under the following link.
http://help.sap.com/saphelp_erp2004/helpdata/en/c5/e4ad64453d11d189430000e829fbbd/frameset.htm
Thanks,
Prasath N

Where can I find the list subscripted variables valid?

I have to do those but I don't know which one is valid and invalid...could someone
tell me where can i look for?
Thanks,
Flower
Part I) List the errors in the following statements, and make corrections to it.
int intArray[ ] = new double[10];
double doubleArray = new double[-10];
the correction are: int Array[] = new Array[10]
double Array = new Array[10]
Could someone check for me? Am I doing right?
Part II) Assume the following declarations:
int a[] = {1, 4, 6, 8, 9, 3, 7, 10, 2, 9};
char b[] = {�H�, �E�, �L�, �L�, �O�};
int x = 7, y = 2;
double z = 0.0;
Then, indicate the value of the following subscripted variables. Indicate the ones that are not valid.
a) a[0]-----------valid
b) b[x]-----------valid
c) a[x+y]-------valid
d) b[x%y]-------valid
e) a[b[2]]--------not valid
f) b[y-a[5]]-----not valid
g) a[Math.sqrt(2)]---valid
h) b[b[a[0]]-48]------valid
Also could someone check for me to....Am I doing right?
Thanks,
Flower

I have to do those but I don't know which one is valid
and invalid...could someone
tell me where can i look for?
Thanks,
Flower
Part I) List the errors in the following statements,
and make corrections to it.
int intArray[ ] = new double[10];
double doubleArray = new double[-10];
the correction are: int Array[] = new Array[10]
double Array = new
double Array = new Array[10]
Could someone check for me? Am I doing right?
No, I'm affraid not. The error in the first (int intArray[ ] = new double[10];) is that you declare intArray as an array of ints, but initialise it as an array of doubles. The correction would be
int intArray[] = new int[10];
The second one is almost correct, except its being initialised with a negative size. The size needs to be positive, so the corrected version would be
double doubleArray = new double[10];
As far as I can see, thats all thats wrong with them. Unfortunately, your guesses were way off.
>
Part II) Assume the following declarations:
int a[] = {1, 4, 6, 8, 9, 3, 7, 10, 2, 9};
char b[] = {�H�, �E�, �L�, �L�, �O�};
int x = 7, y = 2;
double z = 0.0;
Then, indicate the value of the following subscripted
variables. Indicate the ones that are not valid.
a) a[0]-----------valid
b) b[x]-----------valid
c) a[x+y]-------valid
d) b[x%y]-------valid
e) a[b[2]]--------not valid
f) b[y-a[5]]-----not valid
g) a[Math.sqrt(2)]---valid
h) b[b[a[0]]-48]------valid
Also could someone check for me to....Am I doing
right?
Thanks,
FlowerNope, again, wrong I'm affraid, heres the right version.
a) a[0]-----------valid, value = 1
b) b[x]-----------invalid (array index out of bounds)
c) a[x+y]-------invalid (array index out of bounds)
d) b[x%y]-------valid, value = 'E'
e) a[b[2]]--------not sure (I haven't got enough time to look, sorry)
f) b[y-a[5]]-----not valid
g) a[Math.sqrt(2)]---invalid (non integer array index)
h) b[b[a[0]]-48]------not sure (I haven't got enough time to look, sorry)
Hope that helps, feel free to ask anything else about it if you don't understand
Alan

Where can i find the audio content of logic pro9 that i installed?

hi just wanted to know where i can find all the audio content i installed that came with logic pro 9. i can find the jam packs and apple loops contents but not the 3 audio contents. thanks

Hi
The installers place things in several locations:
General Logic/Mainstage (Library:Application Support:Logic and Library:Audio)
Appleloops (Library:Audio:Apple Loops)
JamPack samples (Library:Application Support:Garageband:Instrument Library:Sampler)
HTH
CCT

Where can I find a list of compatible software/hardware that will work with Yosemite?

Before I upgrade to Yosemite I would like to see a list of incompatible software/hardware to help me decide to upgrade or not.

I have success still with Photoshop CS3, though you will need to download a java package, but it takes you right to the download for that and it works just fine.. Basically it seems if it ran under Snow Leopard (barring of course the PPC code that used Rosetta) it runs in Yosemite. Heck, using an updated menucracker, I managed to keep my iStat 2 menus working!

Where can I find the list of the universities that provides education price? Anyone who knows URL or sth?

URL plz!

II'm not aware of any comprehensive list. However you can get the education price at any Apple store or online by showing proof that you are an enrolled student.

Where can I find the "Shared Variable Properties" VI to be used in my program for configuring SV remotely?

I was using the "configure Alarms" and "configure Logging" VIs to design two user interfaces to make use of these VIs when I came across a problem. In both VIs you can enable logging of alarms. So which one is valid? Which one has priority? Then I looked at the "Shared Variable Properties" built into the project explorer. Now I realize that I am spending all of this time redesigning this properties dialog (which also has two options of enabling logging of alarms (on the Alarms tab to the far right side as well as on the Logging tab). So now my question is, how do I access this "Shared Variable Properties" dialog through my program (Note: this would be on a different machine than where the shared variables are set up. The point is to configure shared variables remotely).
Thanks
Matt

Here is a VI I re-created and posted for all. I'm not sure why NI doesn't provide their VI to the developer. The only thing I can't figure out is that when reading in the "Ack Type" into a variable, it generates an error. It will work if you go into "project explorer" and right click on the library with the shared variable and "deploy" but eventually stops working. I have tried using the "undeploy library" and "deploy library" to see if this would be a work around but had no success.
Just pipe the path of the shared variable into the vi.
Mattk
Attachments:
Shared Variable Properties.vi ‏95 KB

HT1391 where can I find a list of receipts for apps that I have purchased?

I receive an email with the reciept individual purchase but I would like to go to a common area in my account and view them for the year etc. for tax purposes, reimbursement etc. Is this option available?

You should be able to see the purchase history on your account via the Store > View My Account menu option on your computer's iTunes (I'm not sure whether it shows in-app purchases or auto-renewing app subscriptions as I've never made any) - that is the only place that I know of where you can see it (though if other people know other places hopefully they'll post).

I sent e-mail photos from iPhoto using my @me account but I do not find the history of sent e-mails in my new iCloud account. Where can I find the history of sent e-mails?

I sent e-mail photos from iPhoto using my @me account but I do not find the history of sent e-mails in my new iCloud account. Where can I find the history of sent e-mails?

Using iPhoto as the email client in iPhoto does not creatge a sent copy. iPhoto indicates in the Info drawer if a photo was emailed by iPhoto (under the Sharing section):
There's no easy way to search for photos that have been emailed. Each photo has to be inspected via the Info tray.
One could add a keyword to emailed photos which would let a smart album keep track of those photos.
A better solution, IMO, is to set Mail as the email client (in iPhoto's General preference pane) and use it. That will give you an sent copy, better access to your contacts and, if you want a theme, numerous photo themes under the Stationary section of Mail.
OT

Where can I find a list of Prepackaged Webdynpro forms

Hello,
Where can I find a list of u201Cprepackagedu201D webdynpro forms that are available? Is there anything there for Purchase Order Approvals and Purchase Req Approvals?
SAP ECC 6.0
SAP Basis 7.0

Never mind found what I needed

Where can I find the no-no list?

As I am learning more and more about app development, it seems a lot of time can be wasted if you don't follow the rules Apple has set forth. I find post here and there about what not to do, such as using private API's, and tried searching in the Dev Center for something. As I learn I want to learn the, your app has more chance of not being rejected way, where can I find the "no-no" list Apple has?

The obvious document would be the App Store Review Guidelines for iOS and OSX.
iOS: https://developer.apple.com/app-store/review/guidelines/
Mac (OSX): https://developer.apple.com/app-store/review/guidelines/mac/
Note that iOS apps can only be distributed via the App Store while OSX apps can be distributed directly by the developer.
Creating a non-App Store app in OSX has several advantages and disadvantages:
The App Store handles a number of practical issues for you: like setting up a download page and processing payments. It also (supposedly) gives you access to a larger customer base and is the "default" location for getting apps that Apple pushes new users to. The App Store is also more convenient when re-downloading apps, safer and more convenient as users don't have to keep track of activation codes for purchased apps.
You don't need to sandbox your app, this is helpful for certain apps that need to access data from other apps or needed to call other apps e.g. via AppleScript.
You can use private APIs, although this is generally not recommended as these classes are not documented and may change/disappear between OS releases. But poking around in private APIs and other internals may sometimes be the only way to access certain information or to get certain features.
Not being a App Store app will also mean that you can't use certain APIs - I think that iCloud is one of these.

Where do I find the list that loads the programs at start-up so that I can disable some.

Where do I find the list that controls the program loading at start-up. Also how do I know which ones I can disable. I am trying to speed up the start-up process.

See http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autotruns

Where can I find the song list for the glenn miller gold collection

Looking for help!!
     Where can I find the song list for the CD of The Glenn Miller Gold Collection DIGITAL DEJAVU?
               [email protected]

Thank you for trying but this is the wrong disk. I'm looking for the list on the disk made in Italy by Phonocomp SpA . It has a number on it of 5-105-2 and CEDAR DIGITAL REMASTERING 1992DEJAVU.
       I have tried to attach a picture of the disk but it will not paste to this reply.
                           Herbert Hamlin        [email protected]

Where can I find a list of the keyboard shortcuts for editing a Wiki page, on Windows and Mac?

I tried searching in Help, but I haven't been able to find anything. I'd like to get a list of the keyboard shortcuts that work while editing a wiki page in the Mac Server Wiki running on Lion.
When accessing Lion Server Wiki from a Mac, some of the usual suspects work: cmd+B for bold, cmd+} to indent, etc. When accessing the Lion Server Wiki from Windows, though, I can't find an equivalent keyboard shortcut for the indent / unindent. Where can I find a list of all of them?
Thanks!

http://support.apple.com/kb/HT1558
http://support.apple.com/kb/TA38663
http://support.apple.com/kb/HT4982
They are also listed in the built-in User Guide accessible directly on the iPhone in Safari.
Find the "iPhone User Guide" bookmark, then go to iPhone at a Glance > Status icons

(Cli 8 ink) Where can I find the list of EVERY single printer that uses Cli 8 ink cartridges?

Similar Messages

Maybe you are looking for