CLI Cursor Movement in nconfig / menuconfig

While attempting to configure a custom kernel using nconfig my keyboard's arrow keys do not move the cursor but insert control characters such as "^[OB". I've tried to use nconfig while SSH'd into a screen session on the PC, while SSH'd into the PC without a screen session, & while directly logged onto the PC. I also tried using menuconfig in the same situations with the same results.
I've used nconfig before without problem on this PC but have since reinstalled Arch (i686) & so am suspecting a configuration problem somewhere. I have no X server installed, TERM is set to "xterm-color", my locale is "en.US.UTF-8", & cursor movement via the arrow keys works correctly in bash & vim.
Any ideas on what's wrong?

Meyithi wrote:
Corsair wrote:I uncommented `make nconfig' and commented `yes "" | make config'. So now my build() looks like this
I can't see where on that guide it says to comment 'yes "" | make config", I use the same method and I certainly don't do that.
EDIT/ Here is PKGBUILD I use - http://paste.pocoo.org/show/376935/
I also tried to not comment that line. But as expected, that did not change the behavior of nconfig. Still did not work...

Similar Messages

Populating the screen field when the cursor moves to that field

hi every one,
I want to populate the screen field(MODULE POOL) When the cursor moves to that field.
So can any one help me out with this.
EXAMPLE..
I want to populate 'S10_TOT_PRICE' (Total Price). When the fields like 'S10_PIECES' (Number of Pieces) will be entered. I want to populate 'S10_TOT_PRICE' without pressing any button on the screen nor when enter is hit. When the field 'S10_PIECES'' will be entered with some value and the cursor moves to 'S10_TOT_PRICE' . The Total Price field should be populated. Please help me out with this.
THANKS & REGARDS.
Mahanta.
POINTS WILL BE REWARDED.

Sorry but look at this SAP documentation <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/54/0608162d0711d295520000e8353423/frameset.htm">User Actions on Screens</a>
Extract :
<i>User Actions on Screens
There are various ways in which users can interact with screens.
Filling Input Fields
Users can enter values in any input field on the screen, or change the value using the mouse, in the case of radio buttons and checkboxes. The contents are placed in the corresponding screen field. Filling an input field does not normally trigger the PAI event. Exceptions to this are Checkboxes and Radio Buttons with Function Codes and input fields with Drop Down Boxes.</i>
So, i fear that you cannot "take hand" when user fill a numerical field to perform calculations and update the screen.
Regards

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

I can't delete in the search/address bar on my cursor moves out of the box

When I try to delete after typing a word in the search bar after the cursor moves out of the box I can't i have to reload the page before i can start typing again. Also happens when i just click off the box does not let me type any more without refreshing. I get a beep sound when i try to type or reload

Clear Safari and the reset the iPad again. Settings>Safari>Clear history and website data. Now reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen.
I would also reset the router by unplugging it for 30 seconds and then plug it in again.

The timeline and cursor move very jerky (in a continual chattery motion) in Windows 8.1

in my project the timeline and/or the cursor move very jerky (in a continual chattery motion ) in windows 8.1
i have set the Windows Software Compatibility setting for their "Window 7 emulator" and the condition still persists.
also the "fullscreen playback" for the project used to be very fine resolution and now it is very mushy...
all this tells me there are real problem with my Premier Element 10

Littlefeather
You are running Premiere Elements 10 on Windows 8.1 64 bit. The program works just fine in Windows 8.1 64 bit when run Windows 8.1.
So do not go altering to another operating system. I know this first hand.
The immediate factor that needs ruling in or out is your video card/graphics card. Specifically "Does your Windows 8.1 64 bit use
a NVIDIA GeForce card? If so, that may be your answer. See Announcement at the top of this forum which describe the Premiere
Elements 10 NVIDIA GeForce problem and gives the fix of how to roll back the card's driver version to get Premiere Elements 10
to work for you.
Once we are assured that you are not afflicted by Premiere Elements 10 NVIDIA GeForce syndrome and also know that your current
video card/graphics card driver is up to date, then we can move on to seek other factors that may be causing the problem.
For your convenience, the following is a copy/paste of the Announcement about the issue as it appears at the top of this forum.
All the links and how tos that you will need are in this announcement.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches
specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then
the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The
typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA
nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please do not hesitate to ask if you need clarification on any of this information.
We will be watching for your reply.
Thank you.
ATR

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

Macbook Pro 10.6.8 - Cursor moves by itself, types by itself, opens dashboard by itself, stops responding to keysto22000 there you go! Have switched out keyboards to no avail. Do not use wireless.

Cursor moves by itself, types by itself, opens dashboard by itself, stops responding to keysto22000 - there be a good example. Seems to like the number 2. Have switched out keyboards to no avail. Do not use wireless. Does not start immediately upon turning on computer. Everything is okay from 10 to 20 minutes, then bang. Can deattach then attach keyboard and get a few moments of quiet. All this started today.

If the same erratic behavior occurs when the external KB and mouse are completely disconnected, I think it's time for a Genius Bar appointment to have the problem diagnosed.
http://www.apple.com/retail/geniusbar/
You'll probably want to get the machine revved up ahead of time so it's misbehaving when you walk in the door, rather than count on it to act up — or not — after you and the Genius have been standing around waiting for a while. (BTW, I'm assuming that once it starts acting up, it continues to do so until you give up and shut it down. Is that true?)

Cursor moves on it's own on my 24" imac

My cursor moves on it's own. I do not have a trackpad, or Timbuktu (not sure what that is?) I have used apple support on this once all ready. They had me do a restart from the system disk, run Disk Utility, unplug everything wait and then replug, zap the p-ram, dump a preference panel. But none of it fixed the problem. The cursor just shoots off to the side or the top or bottom depending on what it's closer to. I bought a new mouse, and still had the same problem, so I returned it. I upgraded to the latest OS, still have the problem. The problem continues when I'm working in Photoshop and Illustrator, which is really frustrating because it suddenly streaks across the page while I'm painting (in PS) or if I'm working an anchor point in Illustrator it suddenly pulls it off the page.
Can anybody help me fix this once and for all?
I really appreciate any and all suggestions.

Restart the computer, as long as you're at it do a SMC reset:
SMC RESET
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

In large PDF files my cursor moves around the page at warp speed. It does not seem to make any difference if I slow it down with Sys Prefs. This is not only in preview but also other programs to open PDFs.

In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
Any ideas?

I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
The problem is dependent on the state of both settings.
The spacebar in Mail "works" if I have either of the following setting combinations:
Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
Other combinations FAIL
Keyboard: smart quotes ON, Mail: Check spelling NEVER
Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
Thanks.
Todd Smithgall

Why does the mouse cursor move to away from the currrent application without the mouse being moved

the mouse cursor moves away from the current application without the mouse having been moved - this started with the new version - re-installing Firefox makes the problem go away for a short period - re-installing is not a solution
== This happened ==
Every time Firefox opened
== a few days after installing 3.6.3

Hello Jim.
It's probably one of three things:
#your mouse is getting old (this behavior is common in old optical mouses);
#you have software that is making your mouse cursor behave unexpectedly (I know of an option in Windows that will automatically move your mouse to windows buttons...);
#or you may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Jumping mouse cursor movement with secondary monitor

Mouse cursor movement is interrrupted or jumps as soon as a secondary monitor is connected to my iMac. Either mouse movement direction is affected. Typically cursor movement stops for about a second while moving mouse further. Then suddenly cusor jumps either forward or backward.
As soon as secondary monitor is dicsonnected, cursor movement is perfeclty in synch with actual mouse movement.
I would very much appreciate any hints to solve this issue.
Thanks
Ole

Thanks for your link - read it already yesterday.
Found after some further search other threads with exactly the same issue - unfortunately not yet solved:
[Ati 4870 Monitor/Mouse problem|http://discussions.apple.com/thread.jspa?threadID=2130243&start=0&tstar t=0].
[NEW09 imac External Monitor causes mouse to freeze every 4 sec for half sec |http://discussions.apple.com/thread.jspa?messageID=10832381&#10832381]
This issue seems to affect various of monitor models.
My secondary monitor is a Fujuistu Siemens model H19-1, resolution 1280 x 1024 @ 60 Hz, 32-Bit Colors connected via

How to avoid built-up for "cursor move" events?

I have a rather complicated program where several graphs need to be interactively updated according to cursors using "cursor move" events. The problem is that the recalculation is relatively slow and the behavior is less than satisfactory. Since the cursor position needs to be "tweaked" until the result is as desired, I cannot recalculate only at the "Cursor Release" event.
Lock front panel=enabled makes cursor movements tedious because the cursor movements is very
jumpy and non-interactive. Not user friendly!
Lock front panel=disabled queues up way too many move events and once the cursor is released
the graph continues to jump and recalculate for ages.
The attached demo (LabVIEW 8.20) shows one solution attempt that actually works pretty well: Skip the recalculation unless the cursor position from the event terminal is equal to the cursor position of the graph property node. This basically races through all unecessary intermediary recalculations on stale positions. However, the code can get complicated very quickly if there are multiple cursors.
In my opinion, cursor move events should not get queued up! The event buffer should hold only exactly one entry:
the most recent cursor position for each cursor. Can anyone think of a scenario where the extra cursor position trail is useful? The positions are pretty random anyway, right?
Does anyone have other (better!) ideas how to work around this problem? I definitely want to keep it simple and not throw lots of code at it.
The attached demo contains more details. It demonstrates the problem if "selective updates" is checked. If unchecked, it implements the above mentioned workaround.
LabVIEW Champion . Do more with less code and in less time .
Solved!
Go to Solution.
Attachments:
CursorDelay.vi ‏29 KB

Thanks for the example.
The more I think about this, I strongly prefer my original method. It uses minimal code compare to the other solutions offered here. As a demo, I am attaching an implementation to a slide control.
Fo those without LabVIEW 8.20.
All slide events have "lock front panel" disabled.
TIme delay is 500ms, simulating some complex calculation.
As you can see, it works extremely well:
NO shift registers, extra loops, queues, tuning parameters (min times, etc.), etc.etc.
Just a deceptively simple "equal" followed by a case structure.
The demo shows a typical recording if I quicky move the slide up and down, then release it. You can see that the raw event structure takes more than 40 seconds to stabilize while my selective solution follows the slider position almost perfectly despite the 500ms stall in each update.
See for yourself! Can anyone think of a drawback of this method? Even if the slide terminal is not in the same loop, a comparison of a local variable with the newval should do the trick just fine.
Message Edited by altenbach on 09-28-2006 12:43 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
SLIDEDelay.vi ‏26 KB
SlideUpdate.png ‏21 KB

Programmatically fire graph cursor move event

Is it possible to programmatically fire the Graph Cursor Move Event ? Assigning a value to the Cursor Index or Cursor Position property node does not seem to do it.
Solved!
Go to Solution.

The graph cursor move event contains processing code for data on the graph along with front panel display of those results. Data is put onto the graph during data acquisition which occurs in another event. When that data acquisition event finishes I need to cause the processing code to execute once to update the front panel display so its results are shown for the new acquired data.
I could put the processing code into a different event that fires on say a button value change. Then the graph cursor move event would fire that button event change by setting its value change property. The data acquisition event could also fire that button event.

Event Precedence - Mouse Move or Cursor Move on Graph?

Since LabVIEW 8+ introduced cursor events (grab, move, release), is there a conflict that would occur between a mouse move event and cursor move event since a cursor move involves a mouse move? Or, since the cursor move requires the left mouse button to be down, does that allow LabVIEW to differentiate which event is occurring? I have some code I am writing to draw a box on an intensity graph (using the new plot.images property for graphs) so as to extract a region of interest. At first, I want a cursor to follow the mouse as it moves over the graph. Then, I want to draw the box region when I grab the cursor (with left mouse key down) and drag it. Differentiation of these two event types will allow me to unambiguously accomplish this task.
Thanks,
Don

Moving a cursor will interleave mouse move and cursor move events.
However, you can easily keep state of mouse up/down to distinguish what to do in this particular case. See attached draft (8.20).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
eventqueue1.vi ‏29 KB

CLI Cursor Movement in nconfig / menuconfig

Similar Messages

Maybe you are looking for