Click "adapter monitoring" cause "The page cannot be displayed"

At RWB, the "adapter monitoring" used to be OK.
But now it gives
"The page cannot be displayed".
How to debug it?
Thanks!

Hi,
can you try a direct link:
http://server:port/mdt/amtServlet ?
BTW
try restarting RWB (close all IE windows and open it again)
Regards,
michal

Similar Messages

Run report cause "The page cannot be displayed" OR The connection with the

Hello,
1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
Problem explanation
one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
data,
one report i tried its size is almost 900k ( they are using the same line since last three month and they are
able to run all reports before, bandwidth is 128k), if you run report browser search a little while
for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
this message
Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
The connection with the server was reset.
I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
for
head office client but they are able to run all report with out any error.
any one have idea??
Thanks and Regards,
Khawar

Hello,
Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
Increase the Keepalive time in webcache to a higher value
**************EOF******************
Thanks and Regards,
Khawar

"The Page Cannot Be Displayed" error when clicking the Remote Agent

Hi everyone! We have installed ACS SE 4.0 and we have added a remote agent running on Windows Server 2003. Recently, we are encountering "The page cannot be displayed" error when we click the RA under a network device group. This is resolved by rebooting the ACS SE appliance and accessing the ACS SE web console again but after few hours, problem reoccurs. Clicking the links on the ACS SE web console is okay at first but after clicking the RA, every link shows the error "The page cannot be displayed." Hope you could help us on this problem. Anyone's support is very much appreciated.
Thanks!

Hi JG,
Thank you so much for your response. Does Cisco have a documentation that states that this is a known issue with 4.0, such as release notes, for we might need this for the proposal upgrade?
Again, thanks a lot!

"The page cannot be displayed" error in RWB with IE6 on Windows XP SP2

The following screens in the RWB give an error "The page cannot be displayed":
- End-to-end monitoring
- Alert Configuration
- Alert Inbox
My colleague who is on IE6 on Windows 2000 can display the pages. We have the same roles.
I searched on SAP notes and in the XI forum but could not find any response to this issue yet.
Any ideas?
Thanks.
Cedric

Not really an answer for you, but I run SP2 with IE6 and have no problems. Could be a problem with the host being defined for the Windows 2000 user, but not yourself. Some RWB connections are internally using the Fully qualified domain name while others don't. I know this was an issue with our adapter engine set-up at one point after we applied SP13.

Upload huge file size: "The page cannot be displayed" browser

What are precautions to be take for uploading a huge file
I have an upload file operation in the web application. The web server is OC4J.
//UploadForm.jsp
<FORM NAME="InputForm" ACTION="UploadAction.jsp" METHOD="POST" enctype=multipart/form-data>
<input type="file" name="fileName">
</FORM>
After I deploy the application to the web server, if I upload a small file size, it is fine.
But if i upload huge data ,data is uploading but if any action button is clicked
After 30 seconds, it has error "The page cannot be displayed" shown on the web browser.

Hi All,
I have a similar time out problem, it ll be great if some one provide a solution.
The problem I'm facing is becasue of the time out setting in the proxy server which is 1.5 mins. The app server is sending Response properly but after some 2 mins or so because the processing is a bit complicated (3 API calls done intermittently for different validations).
I cant request for change in proxy server time out setting. So I have to handle this with in my application.
It will be greatful if anyone helps us out of this.
Thanks
Noufal

EXTREMELY URGENT - the page cannot be displayed

gurus,
i'm facing following problem -
1. user logs in portal
2. clicks Navigator link
3. clicks Applications link
4. clicks Application APP_CUSTOMER
5. clicks a dynamic page component in APP_CUSTOMER application and gets the following error -
"the page cannot be displayed" and the browser location has the following url -
"http://bdpinternet7/pls/portal30/PORTAL30.wwexp_api_engine.other_actions"
pls reply on this, this is a major SHO STOPPER .... none of the developers are able to work with the applications.
thanx

Pls provide more information:
1) Your portal Version.
2) Is this reproducible in all the application that you create?
Some probable solutions can be:
1) Check if the Schema on which your application is based on exist.
2) See if there are any INVALID packages in your portal schema
3) Goto the "Manage" tab of the Dynamic Page and check if there is any "Edit" version created (If it is there
then delete it).
Pls tell if u r able to solve this or not.
Thanx,
Chetan.

The page cannot be displayed (message when

Hi together,
since a couple of weeks, I have the problem with the message above in subject. My Client tries to access a "news" document which is - so I think - created by XMLForms Builder. When he clicks on the link, he got the message "The page cannot be displayed. The page you are looking for is currently unavailable. ....".
I have checked the IE option settings. Therefore, we have a PDF document with all required settings. I had also the same problem which has been fixed after I have made changes on my settings but that has no effect on my Client's PC.
I need an urgent idea / solution how to fix that. Thanks for helps
Cengiz

If this is an XE installation it would probably be best addressed in the Oracle XE forum. Having said that, I had a similar problem on my Windoze machine and needed to uninstall all previous Oracle client products.
The basic problem (for me) was that the operating environment (path and environment variables) is not properly prepared to run the XE database and web server. Removing the other Oracle client apps removed the conflicting and offending environment settings and all works well.
For further info you might want to go to that Oracle XE forum.
Earl

BEX - Query Designer - Query Execution - IE "The page cannot be displayed'

Hi ALL,
Trying to execute a query from BEx Query Designer, result needs to be displayed on Internet Explorer.
However, when IE pops up to show the result, it says 'The page cannot be displayed'.
It seems the PORT Number is wrong.
When I execute the RSPLAN the port number is 52300 (23 ASCS) (and it works!!).
For this web query the port in URL is 55300 (53 SCS).
Could you help to configure the right port?
Something needs to be done on Basis side configurations?
Thank you,
Nivia

Hi,
This especific problem was solved na SM30 programa RSPOR_T_PORTAL.
But I still have problem:
The PORTAL logon is displayed and after input the user and pass shows the 500 Internal Error.
Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed
Connect_PM TYPE=B MSHOST=calsaps011.net.bradesco.com.br GROUP=PUBLIC R3NAME=BWH MSSERV=sapmsBWH PCS=1
ERROR partner 'calsaps011.net.bradesco.com.br:sapmsBWH' not reached
I have looked the services and hosts and the files has the sapgw<> and sapms<> right configured.
The important detail is that The PORTAL works if it doesn't come from BEx.
COULD SOMEONE HELP ME?
Tks,
Nivia

Cannot reply - The page cannot be displayed

Hi,
Strange issue over here.
I want to reply to the following thread :
Web server error for access remote pagelet
Unfortunately, as soon as I click on the "reply" button (either the one attach to the post and the one on the top of the thread), I get an error : "+The page cannot be displayed+".
This morning, I replied to some others thread (including in the same forum as the one above - Peoplesoft) without any problem.
Nicolas.
Why Peoplesoft just above is not in italic, according to the new markup ??
Edited by: N. Gasparotto on Sep 1, 2008 6:56 PM
Edited by: N. Gasparotto on Sep 1, 2008 8:42 PM

Oh, really interesting ! DUPLICATE KEY ! The ID are same for two different threads. Good eyes !
Ok, there is something wrong here, some data inconsistency ! Hopefully, OTN team wil have a look into that issue.
Nicolas.
PS :
Here the one from Peoplesoft forum :
Web server error for access remote pagelet
Here the one from Database General forum :
Migration from SQL Server to Oracle
Well, maybe not so duplicate since one is message, the other one is thread...
Edited by: N. Gasparotto on Sep 1, 2008 7:18 PM

The page cannot be displayed Error showing for workspace

Hi All
The page cannot be displayed Error showing for workspace.
http://localhost:19000/workspace/index.jsp
Other web applications working fine.... Shared Services, FDM webclient
1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
Active Server Pages
ASP.NET v1.1.4322
ASP.NET v2.0.50727
Internet Data Connector
Server Side Includes
WebDAV
Application Pool->DefaultApp Status showing Running
Web sites->*1.Default web site 2.Administration* Status showing Running
Regards
Smilee

Correct, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty.

'The page cannot be displayed' when I use IE to open Web Dynpro demo

In the package 'SWDP_DEMO_TUTORIALS' .
Folder Web Dynpro Applicat. -> WDT_ALV ==> URL = 'http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv'
then Right click and choose Test.
IE is open but 'The page cannot be displayed'. (http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv?sap-client=210&sap-language=EN)
1. I actived neccessary service in SICF already. (http://forum.consolut.net/viewtopic.php?f=8&t=1313)
2. C:\WINDOWS\system32\drivers\etc -> hosts file has 2 record.
127.0.0.1 localhost
HP002264446493 HP002264446493
I think I have to add the SAP server IP
So I click at menu bar -> System -> Status and press Other Kernel info. (Green)
==>> I get Host = abcdev and IP address = 10.74.XX.YY
After that, I add the 10.74.XX.YY abcdev to be the last line.
Is it correct?
3. No data in table HTTPURLLOC.
4. ECC 6 and I never installed Netweaver.
PS. I create my own web dynpro but the layout is not working 'The page cannot be displayed' .
Thank you very much.

I change host file to 'abcdev.' but it does not work.
If I use command 'ping -t 10.74.XX.YY' , it's ok.
If I use ping -t abcdev.:8000, it's not working.
PS. IE version 6 and Connection -> Lan settings ==> Not set anything.
Help me please!!!
Edited by: marshi on Feb 8, 2011 2:34 PM

In the Graphic Tab and Work Center Error The Page Cannot be displayed

Hi In the Solar01 and also in the Solman_Workcenter I am getting error "The Page Cannot be displayed"
In the Solar01 - I have Business Processes save and under the Graphic Tab when I am clicking on the correct Business Scenario Node. I am expected Graph to display. But Showing error
In the Solman_Workcenter - I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role. When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
Any Idea friends.
Appreciate your help
-Santh

Hi,
Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
Thanks.
Kathir

Error: "The page cannot be displayed" when trying to login to portal

Hi All;
I can not login to portal, when I click login in portal home page
http:<server_name>/pls/portal , the sso login screen will never come up, producing an error The page cannot be displayed
http://:<server_name>/pls/portal/PORTAL.wwsec_app_priv.login?p_requested_url=PORTAL.home&p_cancel_url=PORTAL.home
BI Components:
Portal:portal is up and running.
Http Server is up and running.
OC4J_Portal is up and running
Any one has an idea ?
Thanks.

Try the troubleshooting documentation:
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b19305/cg_app_k.htm#sthref2513
Mick.

The page cannot be displayed error in UWL

Hi
I am getting the "The page cannot be displayed error when I try to click the Refresh button or MSS link in the UWL.
Any idea...
Regards
Ali

Hello,
Can you be more clear? Are you able to see UWL list itself. If you are not able to see the UWL itself, then please make the needed config is done as in the link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
Regards
<i><b>Raja Sekhar</b></i>

The page cannot be displayed (sxmb_ifr)

when i want to launch integration builder (sxmb_ifr) i get
The page cannot be displayed this is when working through VPN,
but at office it works just fine.. what could be the cause when connecting through VPN?

Boodi,
Are you able to login into ABAP stack.
Please try to give the fully qualified domain name and give a try.
Also please try to add the xi system in hosts file which will be at his location:
C:\WINDOWS\system32\drivers\etc\hosts
Regards,
---Satish

Click "adapter monitoring" cause "The page cannot be displayed"

Similar Messages

Maybe you are looking for