Click and Run error officer 2010 starter

Okay, I have read people's post on Click to Run and Office Starter not opening...Uninstall and re-install Starter 2010...Click to Run will not uninstall, I get an error to contact MS. So, I tried to just re-install hoping that it will fix the problem
but I get the Click to Run error again to contact microsoft...so, how do I get around click to run if I can't repair or un-install...None of the solutions that I have found help. Please help with a different option/patch

Hi,
Fix problems that programs cannot be installed or uninstalled
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Andy Altmann
TechNet Community Support

Similar Messages

  • Cant uninstall Click to run MS Office 2010 beta

    Trying to upgrade MS office 2007 to 2010, it won't allow me to install. It says it can't upgrade a beta version of 2010, so uninstall to continue.
    When I try to install the upgrade I get a setup error which states "setup is unable to proceed due to the following errors: Microsoft Office 2010 does not support upgrading from a pre release version of Microsoft Office 2010. You must first uninstall
    any pre release version of Microsoft Office 2010 products and associated technologies. Correct the issues listed above and re run setup."
    So I then go into my control panel under programs and uninstall or change a program, the only thing I find related is Microsoft Office click-to-run 2010 beta. When I try to uninstall this I get this message, under click to run application manager it says
    "the action cannot be completed. Try the action again. If the problem continues, contact Microsoft product support."
    Any ideas on how to proceed?

    sorry, i have find out the root cause of this issue
    i changed winecfg version to win7, last night. it became normally after i changed it back to XP.
    BTW , office 2010 needs msxml6 and office 2007 needs msxml3 , they are different .dont make it wrong.
    though office 2010 works fine , but @thisllub , you are right , activation is still broken.

  • ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

    ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

    Welcome to the Apple community.
    Unfortunately Office for Mac does not support the correct protocols to work with iCloud.

  • I need to run Microsoft Office 2010 and can't figure out what I need to do...

    Im taking a office applications class and we're required to use Microsoft Office 2010. I have Windows for mac 2011 on my computer but that's not good enough. Can someone tell me what I need to do to get Office 2010 running on my iMac desktop. I'm really not very computer savvy when it comes to this stuff...

    To run Microsoft Office 2010 on your iMac you will need to install Windows.  You can do this one of two ways. 
    Use BootCamp (free program on your iMac) to make a windows partition and then install Microsoft Windows (XP, Vista, or 7) then you will need to restart your computer with the windows partition then you will need to install Microsoft Office. 
    You can buy Parallels Desktop 7 ($79.95) or VMware Fusion 4 (49.95) these programs make what is called a virtual machine on your iMac it's like any other program, but is is designed to run Windows and other OS along side of your Mac OS no need to restart your iMac, the main advantage.  Once you install Windows then you can install Microsoft Office 2010. 
    Note: Both of these methods will require a full version of Microsoft Windows. 

  • Lenovo A310 Idea Centre - Microsoft Office 2010 Starter Edition

    Having searched many sites and the internet generally to find an answer to my problem the main answer is to go to the manufacturer of the PC as they installed Microsoft Office Starter 2010 programme.  The problem is as follows:
    everytime  I finish a Word document in Office 2010 Starter and print off and go to click of/out by Xing top right corner I get a light blue screen which hangs.  By a series of clicking the X and the blue screen I get the message 'WinwordC.exe not working'.  It eventually clears but originally the page cleared instantly. I've tried the 'repair' via the control panel way without success, and re-installed the programme. What is the cause and how does one resolve the problem? Can anybody help please.

    Hello Fshrbcpp,
    It seem to be some compatibility issue, kindly update the Ms Office 2010 service pack.
    http://support.microsoft.com/kb/2460049
    After you install the service pack restart the system and check the issue.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Essbase Excel Addin on 64 Bit Windows 7 and 64 bit Office 2010

    Hi Everyone,
    I have installed 11.1.2.2 on server with Essbase and Shared Services.
    Now, on the client I have 64 bit Windows 7 and 64 bit office 2010.
    I tried installing Excel Addin client only (without Essbase client) and restarted machine after install.
    After install Addin didnt come up automatically and i tried to manually set the add-in, I'm getting an error "This is not a valid add-in"
    Is it because i am using 64 bit of office and have to go back to 32 bit.
    Isnt 64 bit supported for latest 11.1.2.2 Essbase ?
    Any ideas or experience in this regard will be helpful to me as our company is going for Windows 7 and Office 2010 across the business users and if 64 bit Office is not supported or has issues i would have to suggest them to go with 32 bit Office 2010.
    Thank you.

    for 64 bit i guess its not avaiable for 2010 excel
    but you can download 9 version or 11.1.1.3 with patch below is link.. its just a client ~~~
    https://support.oracle.com/CSP/ui/flash.html#tab=PatchHomePage(page=PatchHomePage&id=gj46o799()),(page=PatchSearchResultsHome&id=gj46pr1y(search=%3CSearch%3E%0A%20%20%3CFilter%20name=%22patch_number%22%20op=%22IS%22%20value=%2210383144%22%20type=%22patch_number%22/%3E%0A%20%20%3CFilter%20name=%22platform%22%20op=%22IS%22%20value=%22%22%20type=%22platform%22/%3E%0A%3C/Search%3E&incFamilyProds=false&flag=search))
    ~~~More info from oracle support ~~~~
    Support for Microsoft Office 2010 has been added to the following releases:
    Smart View:
    Essbase v9.3.3 for Client Third Party Software.
    Smart View v11.1.1.3.02. This release is available as Patch 9889521. It offers support for 32-bit Office 2010 for Smart View only.
    Smart View v11.1.2.1. Download the EPM System Release 11.1.2 Smart View for 32 bit Office 2010 from Oracle Software Delivery Cloud. Select the Product Pack "Oracle Enterprise Performance Management System" and the appropriate Platform.
    Excel Add-in:
    Essbase v9.3.3 for Client Third Party Software.
    The Support Matrix and documentation for 9.3.3 can be found at: http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm
    Oracle Hyperion Essbase Client 11.1.1.3.500.. This release is available as Patch 10383144.
    Essbase v11.1.2.1. Download the EPM System Release 11.1.2 Excel Add-In for 32 bit Office 2010 from Oracle Software Delivery Cloud. Select the Product Pack "Oracle Enterprise Performance Management System" and the appropriate Platform.
    Note: 64-bit Office is not currently supported as of December 2011.   However, it is planned to be supported with SmartView only in the next release which is due early 2012.  The classic Excel add-in will not support 64 bit Office regardless of version

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • Use Office 2010 Starter on PC with Windows 7

    Hi,
    Can I use a Office 2010 Starter on PC with Windows 7?
    Thanks,
    RLV

    Microsoft Office Starter 2010 is a simplified, ad-funded version of Microsoft Office 2010 that comes pre-loaded. You don't need a license for it. If you buy an OEM computer, you can get it pre-loaded.
    If you find that you want more features, you can upgrade to Office 2010 right from Office Starter 2010. Just click
    Purchase on the Home tab on the ribbon.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Firefox will not run - double click on icon, select icon and run/open, opening via start menu are all dead

    Problem started yesterday (9/28). While in Firefox, bookmarks stopped working. Closed out FF and tried to reopen the program, and nothing causes FF to launch. Tried double clicking on the desktop icon, single click on the bottom status bar (on XP), right click on icon to open or run, trying via Start -> All Programs -> Mozilla and neither regular or safe mode would launch. Only thing that seems to fix the problem is a full restart of the computer. Tried downloading the newest version via Chrome. When I clicked to run the install, kept getting a message to close all FF windows, even though there were no FF windows open.

    Check that you do not run Firefox as Administrator.
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
    * Privilege Level: "Run this program as Administrator" should not be selected
    * "Run this program in compatibility mode for:" should not be selected
    Also check the Properties of the firefox.exe program in the Firefox program directory.
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls

  • DDE server window error - Office 2010

    dear microsoft team,
    i recently installed microsoft office 2010 on my company laptop which is running on Windows XP sp3 platform.
    since then, the sofeware is not runing properly, the office 2010 programs stop responding everytime after i open them, it happened in Word, Excel, and Access, i am sure if i use other program in Office 2010 they would be the same. i suffer some data lost
    as i had to manually force to close the Not responding window.
    another funny thing since i installed the lastest version of Microsoft office 2010 is that, everytime i try to shut down the laptop, the DDE server Window error message keeps showing up, sometimes it comes out
    few times, so i had to wait longtime until i can shut the computer.
    after tried few times, i notice that if i don't use any of the Office 2010 program when turn on the computer,
    i can shut down without hassel, but as long as after i used word, excel or access then DDE server window error shows up when i try to shut down the machine. so i think it has to do with the new Office 2010.
    i'd appreciate if you can help here. thanks in advace.
    regards
    xiaoming

    Hi,
    1. Regarding this issue, you can check this KB:
    The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in an Office 2007 program, or in an Office 2010 program
    http://support.microsoft.com/kb/313937
    2. If you received any error code or the error message, please let me know. So we can handle this issue better.
    3. If the issue still persists, let's use safe mode to check issue, you can refer to the following template:
    To start the Office program in safe mode
    1. Click Start, point to All Programs, and then point to Microsoft Office.
    2. Press and hold the CTRL key, and then click the Office program you want to start.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Office program:
    Disable add-ins
    1. Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
    2. Check if there are any add-ins, clear the checkbox to disable them.
    3. Close the Office program and restart it.
    4. Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
    If the problem persists after this, let's try to repair the Office program from:
    Start -> Control Panel > Programs and Features, right click the Office program and choose Change, then Repair.
    Best Regards,
    Nick Wan

  • Deployment Tool to Download Click-to-Run for Office 365

    The download gets only so far and then fails.  Below is my .xml and the last log from %temp%. Thanks for any help!
    I ran: 
    "setup.exe /download mmmconfiguration.xml"
    mmmconfiguration.xml:
    <Configuration>
         <Add SourcePath="d:\Shared\O365\downloads" OfficeClientEdition="32" >    
               <Product ID="O365ProPlusRetail">      
                     <Language ID="en-us" />     
               </Product>   
          </Add>
              <Updates Enabled="TRUE" UpdatePath="d:\Shared\O365\downloads" />
              <Display Level="None" AcceptEULA="TRUE" />
              <Logging Path="%temp%" />
    </Configuration>
    BGNBNFILEP01-20140404-1649.log
    Timestamp Process TID Area Category EventID Level Message Correlation
    04/04/2014 16:49:31.739 SETUP (0x12a4) 0xc28  Click-To-Run aqkhc Medium CmdLine:"D:\Shared\O365\OfficeDeploymentTool\setup.exe" /download mmmconfiguration.xml
    04/04/2014 16:49:31.739 SETUP (0x12a4) 0xc28  Click-To-Run Telemetry aqkhd Medium {"SessionID":"415d1df5-8e0e-4875-90ec-5810ed4ecff4","GeoID":"244","Ver":"15.0.4595.1000","Bitness":"32","IntegrityLevel":"0x3000","SecuritySessionId":"3"}
    04/04/2014 16:49:31.739 SETUP (0x12a4) 0xc28  Click-To-Run Telemetry aqkhe Medium {"SessionID":"415d1df5-8e0e-4875-90ec-5810ed4ecff4","GeoID":"244","Ver":"15.0.4595.1000","OSVersion":"6.1","SP":"1","ProductType":"3","ProcessorArch":"9","Locale":"1033"}
    04/04/2014 16:49:31.739 SETUP (0x12a4) 0xc28  Click-To-Run amawz Medium Args::ParseArgument: Parsing commandline.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run ambpm Medium Args::Load: Have Admin scenario
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run amaw0 Medium Args::GetNextArgument: Next argument: /download
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run amaw0 Medium Args::GetNextArgument: Next argument: mmmconfiguration.xml
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh7y Medium Args::GetConfigFile: config file: mmmconfiguration.xml
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run appfq Medium Args::Load: product release id: none  culture: en-us
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run apvr9 Medium TrySetUserRegistry::TrySetAttemptGetKey: Setting Attempt Get Key for none
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run amaw8 Medium TrySetUserRegistry::TrySetLicenseTokenOrKey: No key or token found for none
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh76 Medium HandleCommandLineAction::HandleStateAction: Not OOD scenario nor showing ODT help, check for elevation.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh8l Medium TryGetElevation::HandleStateAction: Already running from elevated context.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh78 Medium HandleCommandLineAction::HandleStateAction: Starting Admin tool scenario.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh8c Medium HandleCommandLineAction::HandleStateAction: Download bits locally.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run aoh8r Medium DownloadOffice::HandleStateAction: Download office bits to specified location.
    04/04/2014 16:49:31.755 SETUP (0x12a4) 0xc28  Click-To-Run anwvz Medium Configuration::Load: Using config file: mmmconfiguration.xml
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of SourcePath: d:\Shared\O365\downloads
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvu Medium ConfigFile::ParseAddNode: Version not specified.
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvv Medium ConfigFile::ParseAddNode: ForceDowngrade: 
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of OfficeClientEdition: 32
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of Level: None
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of AcceptEULA: TRUE
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of Path: %temp%
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of Enabled: TRUE
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run anwvy Medium ConfigFile::ParseAttribute: Value of UpdatePath: d:\Shared\O365\downloads
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run amaws Medium Configuration::Load: Setting culture to: en-us
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run amaxd Medium DownloadOffice::DownloadPackages: Getting Office for culture: en-us
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run amaxd Medium DownloadOffice::DownloadPackages: Getting Office for culture: x-none
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run amaxe Medium DownloadOffice::DownloadPackages: Getting Office in directory: d:\Shared\O365\downloads\Office\Data
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run amaxf Medium DownloadOffice::DownloadPackages: Getting version cab file.
    04/04/2014 16:49:31.864 SETUP (0x12a4) 0xc28  Click-To-Run aon8k Medium CabManager::DetermineCabName: Type:0, Platform:x86, Version:, Culture:en-us -> v32.cab
    04/04/2014 16:49:32.036 SETUP (0x12a4) 0xc28  Click-To-Run aon8i Medium CabManager::Extract: Extracting d:\Shared\O365\downloads\Office\Data\v32.cab -> C:\Users\MMARTE~1\AppData\Local\Temp\3\343E687C
    04/04/2014 16:49:32.364 SETUP (0x12a4) 0xc28  Click-To-Run anwv6 Medium Descriptor::Load: Reading Available value from descriptor: 15.0.4569.1508
    04/04/2014 16:49:32.364 SETUP (0x12a4) 0xc28  Click-To-Run amawt Medium Descriptor::Load: Prereq Node exists. Being parsing it.
    04/04/2014 16:49:32.364 SETUP (0x12a4) 0xc28  Click-To-Run anwv7 Medium Descriptor::Load: Reading Bootstrapper value from descriptor: 15.0
    04/04/2014 16:49:32.380 SETUP (0x12a4) 0xc28  Click-To-Run amaxg Medium DownloadOffice::DownloadPackages: Getting Office lcid: 1033
    04/04/2014 16:49:32.380 SETUP (0x12a4) 0xc28  Click-To-Run amaxm Medium DownloadOffice::DownloadFile: Downloading file http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675/Office/Data/15.0.4569.1508/stream.x86.en-us.dat
    04/04/2014 16:51:09.584 SETUP (0x12a4) 0xc28  Click-To-Run amaxh Medium DownloadOffice::DownloadPackages: Succesfully downloaded .dat file
    04/04/2014 16:51:09.584 SETUP (0x12a4) 0xc28  Click-To-Run aon8k Medium CabManager::DetermineCabName: Type:1, Platform:x86, Version:15.0.4569.1508, Culture:en-us -> i321033.cab
    04/04/2014 16:51:10.537 SETUP (0x12a4) 0xc28  Click-To-Run amaxi Medium DownloadOffice::DownloadPackages: Succesfully downloaded client cab
    04/04/2014 16:51:10.537 SETUP (0x12a4) 0xc28  Click-To-Run aon8k Medium CabManager::DetermineCabName: Type:1, Platform:x64, Version:15.0.4569.1508, Culture:en-us -> i641033.cab
    04/04/2014 16:51:11.724 SETUP (0x12a4) 0xc28  Click-To-Run amaxj Medium DownloadOffice::DownloadPackages: Succesfully downloaded 64bit client cab
    04/04/2014 16:51:11.724 SETUP (0x12a4) 0xc28  Click-To-Run aon8k Medium CabManager::DetermineCabName: Type:3, Platform:x86, Version:15.0.4569.1508, Culture:en-us -> s321033.cab
    04/04/2014 16:51:11.881 SETUP (0x12a4) 0xc28  Click-To-Run amaxk Medium DownloadOffice::DownloadPackages: Succesfully downloaded stream cab for culture.
    04/04/2014 16:51:11.881 SETUP (0x12a4) 0xc28  Click-To-Run amaxg Medium DownloadOffice::DownloadPackages: Getting Office lcid: 0
    04/04/2014 16:51:11.881 SETUP (0x12a4) 0xc28  Click-To-Run amaxm Medium DownloadOffice::DownloadFile: Downloading file http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675/Office/Data/15.0.4569.1508/stream.x86.x-none.dat
    04/04/2014 16:51:11.928 SETUP (0x12a4) 0xc28  Click-To-Run aoh8t Unexpected DownloadOffice::HandleStateAction: Failed to download office bits.
    04/04/2014 16:51:11.928 SETUP (0x12a4) 0xc28  Click-To-Run aoh71 Medium BootstrapperState::OnError: Error has occured. Go to ExitBootStateMachine.
    04/04/2014 16:51:11.943 SETUP (0x12a4) 0xc28  Click-To-Run aoh9f Medium BootStateMachine::ShowFailureUI: Showing failure UI.
    04/04/2014 16:51:37.022 SETUP (0x12a4) 0xc28  Click-To-Run aoh72 Medium ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0
    04/04/2014 16:51:37.022 SETUP (0x12a4) 0xc28  Click-To-Run aoh9z Medium AdminBootstrapper::Main: Installation came back with -2147418113.
    04/04/2014 16:51:37.022 SETUP (0x12a4) 0xc28  Logging Liblet aqc99 Medium Logging liblet uninitializing.

    Good to see you have unblocked by yourself. Could you please share your steps/workaround here on how you fixed this? Other people might also experience the same issue, your answers could be helpful to them.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Is it possible to Install the 64-bit Microsoft Access Database Engine 2010 if we are running Microsoft Office 2010 32-bit?

    So we are running Microsoft Office Professional Plus 2010, Version 14.0.7015.1000
    (32-bit)
    This is what is installed via our Network and Network licensing.
    I am trying, in vain, to read and write a .xlsx file via a C# Edit Script in a SSIS Package. And I have tried using...
    string StringConnection = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 12.0;HDR=Yes;IMEX=1\"";
    And this tells me that this has not been installed. So when I go and try and get the Microsoft Access Database Engine 2010 64-bit, which would allow me to use Microsoft.ACE.OLEDB.12.0 and allow me to read, write, and process this .xlsx file, it tells me
    I cannot install it because I already have 32-bit installed and it wants me to un-install Microsoft Office 2010. Why? Because it is 32-bit? And I can't do that because this is what we have and what we're licensed for and from what I've read seems to be the
    industry standard because most software vendors are ill equipped to process 64-bit right now.
    So my question is this...How can I use a C# Edit Script to read and process a .xlsx file? Because if I try using...
    string StringConnection = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 8.0;HDR=Yes;IMEX=1\"";
    It then tells me that the file is not in that format.
    Please excuse me for asking this question in a couple of different ways out here but I cannot for the life of me seem to be able to get an answer as to how I can process a .xlsx file with a C# script and which driver to use that will make this work.
    Thanks for your review and am hopeful for a reply.
    ITBobbyP85

    Hi ITBobby85,
    If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
    We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
    of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Web dynpro explorer - deploy and run error

    Hi
    When we do "new archive and run" from web dynpro explorer we are getting the following error.
    windows cannot find "http://sapdev2:50100/webdynpro/dispatcher/local/testproject/Testapp?SAPtestId=10'. Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click search
    Kinldy help how to rectify this error.
    Thanks and regards,

    Hi,
    Each time you deploy new archive & run, a new test id is generated.
    Try after deleting this test id parameter (from ? onwards) or just choose Run aaplication in NWDS.
    What I get is that even the browser does not open when you run the application from NWDS, in that case you may try restarting the NWDS.
    Kind Regards,
    Nitin

  • Is it possible to easily run Microsoft office 2010 with access on a MacBook pro or have I wasted my money ?

    Okay , first off thanks for any help in advance . I just purchased a MacBook pro for my daughter for college . ( finance major ) . Her class requires Microsoft office 2010 with access .  As you probably already know , and I have just learned , that is no offered for Mac. Is there an easy way To run ms office with access on a MacBook pro or have I wasted my money ?

    All that matters is file compatibility. The documents look the same. I've been a professor, so I don't see any issues here at all.
    Another option you may want to consider is this: Run Windows on the Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • OPM "build and run" error

    Hi
    I have a problem with OPM when I use "build and run".
    I only get a message "The system cannot find the file specified" and nothing more. It has worked, but it used to open Google Chrome browser. Since I did not want this behaviour I uninstalled Google Chrome. But then I got this error instead.
    I can run "build and debug" prefectly fine.
    The problem is not related to a specific project.
    I have also tried to reinstall OPM but the problem remains.
    What file is it the system cannot find? Is there a way of finding this in a log somewhere?
    How does the "build and run" command work? Is there a way of checking why it can not open the browser?
    kind regards,
    Michael

    Hi Andrew
    Just to add some more observations.
    It seems that OPM doesn't look directly to the default browser setting. If I change the default browser, OPM does not directly recognize the new setting. OPM opens the previous selected default browser anyway.
    I dont know if the setting is unique per project or if it is per OPM installation.
    OPM seems to pick up the default browser, but then OPM caches this somewhere. Which caused problem for me when I uninstalled Google Chrome. OPM insisted on trying to start Google Chrome anyway.
    When I now got Firefox working as default browser the problem solved it self. But when I selected IE as default browser, then when I ran OPM it still opened Firefox, and Firefox gave me the warning that it was not default browser.
    So OPM does not always look at the default browser setting.
    kind regards,
    Michael

Maybe you are looking for