Click and show in any order

Senario
Captivate 5
I have 4 faces on the left of my slide and 4 hidden text boxes of information next to them. The learner clicks the face to show the information.
If the learner clicks out of sequence they cannot then go back and click previous face eg.
1 click info show ok
2 miss
3 click info shows ok
4 click info shows ok
Go back to 2 the click doesnt work. I know it is because the timeline has advanced but how do I set it so you can click any face say start at 4 then 2 then 3 then 1.
Help please. Oh can you make it realy simple although I have been using Captivate for years I am simple.

If the intent here is just to display information in a click box relevant to each of the faces I would NOT use clickboxes, because it all ends up being too complicated and requires Advanced Actions etc.
The simplest solution is just to use Rollover Captions for each face. As soon as the user rolls over the face the caption appears. If they move off that face to any of the others, the previous caption disappears and the new one appears. You can't get simpler than this. Why use clicks if a rollover will do the trick?

Similar Messages

I had a icon on dock that i clicked and showed all applications. i accidentally removed from dock how do i get it back??

i had a icon on dock that i clicked and showed all applications. i accidentally removed from dock how do i get it back??

Click the Finder icon in the Dock to launch it.
Open the Application folder and find the Launchpad application.
Drag it to the Dock.

Allowing user to click check boxes in any order

Hi,
I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the check boxes in any order, as opposed to clicking them in the same order that I did using the normal training recording.
I've been trying to insert click boxes and assign variables, but then I run into the problem of not being able to show the checkmark when the check box is clicked.
Has anyone run into this problem or tried to created a page where the user can click multiple object in no particular order?
Thanks!

Hello,
This is perfectly possible with the checkboxes widget, and will be a lot less work than messing with images and click boxes. The big advantage of the checkboxes widget is that it is static, so you do not need to worry about rewinding the playhead which would be the case if you are working with interactive objects. However if you want to offer a 'reset' to the user, or perhaps to return to the slide with the widget, I warmly recommend to download the free enhanced checkboxes widget created by Jim Leichliter, because it allows you to control the variables associated with the widget.
I will not explain extensively how to use it, bit in a hurry because I have to teach in a couple of minutes. But here are some links: first a link to Jim's widget, than to a blog post where I explain the use of the Default Checkboxes widget, and third the explanation of the enhanced version.
Checkboxes Enhanced
Widgets and Custom Questions - part 1
Extended widgets ...
Just one last warning: I did not check the maximum checkboxes supported by the widget (you need 10), if necessary however you can insert the widget twice. However never duplicate a widget, nor have them in the same space on the stage.
Lilybiri

I am unable to click and drag songs in order to arrange them in a playlist. The tutorial says to simply highlight and drag the song to arrange them. Any suggestions? My version of iTunes is the current version.

The tutorial says to simply highlight and drag, but that does not work. Any suggestions?

Frank1029 wrote:
The tutorial says to simply highlight and drag, but that does not work. Any suggestions?
It should do. Which Playlist are you trying to re-arrange? Is it one you have created or one of the iTunes fixed ones? (Although it is possible to re-arrange the Recently Added Playlist, I would not recommend it.)

Upload PDF File not operating. Click and nothing happens - any reason?

Thanks

Hi,
What browser/platform are you using? What are the steps that you did? Will you repeat the upload again after clearing your browser cache/restart?
In the meantime, please take a look at this FAQ and see if it helps you resolve the problem,
http://forums.adobe.com/docs/DOC-4141
Thanks,
Lucia

Is there a way to hide and show the whole 3D viewer with javascript?

I'm trying to set up a pdf so that the person who's reading it can use a button to switch between a picture of the product and a 3D model of the same. The idea is that the two ways of illustrating the product can be in the same space, so that there's still room to put enough text on the front page. I have spent about three hours trying to figure this out.
Even if I hide the model withtin the 3D viewer and make the background transparent, the 3D viewer is still there, intercepting mouse clicks and showing the toolbar.
I've tried modfiying the Annot3D, by moving it off the page, because the javascript reference says that the "rect" property of Annot3D can be written, but the viewer just stays in the same location.
Is there any way to get the whole thing to go away with one button click and come back with another?
Thank you for your help and patience,
Daniel,
PS - In the past I've placed product drawings and pictures in the same place by putting them on separate layers, but I can't figure out how to get the 3D display attached to a layer.

One way you could get the same effect is to use separate pages. Disable the mouse scroll for switching pages and instead use buttons to go from one page to the other. The user will get the impression that the annotation has appeared and disappeared.
Another hack is to use the product information as the icon on the annotation, so just disable it when you want to show the product information and make sure it lines up with an overlay of surrounding product information.

ALV: Right Button Click and Context Menu

Hi Experts,
I have to implement an ALV which should act on a right button click and show a context menu.
Is this possible? I found only events for "on_double_click" or "on_link_click" and is it possible to show a context menu?
Thanks in advanced.
Best regards,
Markus

Hello Markus
The relevant events are:
CONTEXT_MENU_REQUEST
USER_COMMAND
Have a look at my sample report ZUS_SDN_ALV_CONTEXT_MENU_1.
*& Report ZUS_SDN_ALV_CONTEXT_MENU_1
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="910750"></a>
*& Thread: ALV: Right Button Click and Context Menu
*& Flow logic of screen 100 (no screen elements; ok_code = GD_OKCODE)
*&    PROCESS BEFORE OUTPUT.
*&      MODULE STATUS_0100.
*&    PROCESS AFTER INPUT.
*&      MODULE USER_COMMAND_0100.
REPORT zus_sdn_alv_context_menu_1.
DATA:
gd_okcode        TYPE ui_func,
go_docking       TYPE REF TO cl_gui_docking_container,
go_splitter      TYPE REF TO cl_gui_splitter_container,
go_cell_top      TYPE REF TO cl_gui_container,
go_cell_bottom   TYPE REF TO cl_gui_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
gs_layout        TYPE lvc_s_layo.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1,
gt_knvv          TYPE STANDARD TABLE OF knvv.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender,
      handle_context_menu_request FOR EVENT context_menu_request
                                                 OF cl_gui_alv_grid
        IMPORTING
          e_object
          sender,
      handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
        IMPORTING
          e_ucomm
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
*        IS_ROW_ID    =
*        IS_COLUMN_ID =
        is_row_no    = es_row_no.
*   Triggers PAI of the dynpro with the specified ok-code
    CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD.                    "handle_double_click
METHOD handle_context_menu_request.
*   define local data
    DATA: lt_fcodes    TYPE ui_funcattr,
          ls_fcode     TYPE uiattentry,
          ls_func      TYPE ui_func,
          lt_func      TYPE ui_functions.
    "   Inactivate all standard functions
    CALL METHOD e_object->get_functions
      IMPORTING
        fcodes = lt_fcodes.
    LOOP AT lt_fcodes INTO ls_fcode.
      ls_func = ls_fcode-fcode.
      APPEND ls_func TO lt_func.
    ENDLOOP.
    e_object->disable_functions( lt_func ).
"   Add new functions
    e_object->add_separator( ).
    CALL METHOD e_object->add_function
      EXPORTING
        fcode = 'XD03'
        text = 'Call Transaction'.
    CALL METHOD e_object->add_function
      EXPORTING
        fcode = 'DETAILS'
        text = 'Display Details'.
ENDMETHOD.                    "handle_context_menu_request
METHOD handle_user_command.
*   define local data
    DATA:
      ls_knb1   TYPE knb1,
      ls_row    TYPE lvc_s_row,
      ls_col    TYPE lvc_s_col.
    "   NOTE: in case of CL_GUI_ALV_GRID the functions of a context menu
    "         are handled in method USER_COMMAND.
    CHECK ( e_ucomm = 'XD03'      OR
            e_ucomm = 'DETAILS' ).
    CALL METHOD sender->get_current_cell
      IMPORTING
        es_row_id = ls_row
        es_col_id = ls_col.
    CASE e_ucomm.
      WHEN 'XD03'.
        READ TABLE gt_knb1 INTO ls_knb1 INDEX ls_row-index.
        SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
        SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      WHEN 'DETAILS'.
"       NOTE: only for the sake of simplicity the event handler method
        "             is called
        CALL METHOD lcl_eventhandler=>handle_double_click
          EXPORTING
            e_row = ls_row
            sender = go_grid1.
      WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_user_command
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = '1000'.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_docking
      rows              = 2
      columns           = 1
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_top.
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_cell_top
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click         FOR go_grid1,
    lcl_eventhandler=>handle_context_menu_request FOR go_grid1,
    lcl_eventhandler=>handle_user_command         FOR go_grid1.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_cell_bottom
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNVV'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knvv " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
*   User has pushed button "Display Details"
    WHEN 'DETAIL'.
      PERFORM entry_show_details.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form ENTRY_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM entry_show_details .
* define local data
DATA:
    ld_row      TYPE i,
    ls_knb1     TYPE knb1.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM knvv INTO TABLE gt_knvv
         WHERE kunnr = ls_knb1-kunnr.
ENDFORM.                    " ENTRY_SHOW_DETAILS
Regards
Uwe

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable.

HT201359 The new (09/19/13) Apple terms and conditions require one to click the AGREE button in order to update the apps; however, there is no such button to click on. Therefore I cannot update the apps on my iPhone. Any ideas?

The new (09/19/13) Apple terms and conditions require one to click the AGREE button in order to update the apps; however, there is no such button to click on. Therefore I cannot update the apps on my iPhone. Any ideas?

I was having the same problem, I had to go into iTunes on my laptop and agree to the terms there, and now i can download apps on my iPhone.

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order

By default the photos will be sorted by the date modified.
iOS: Understanding photo sorting
Edit (touch) them in the order you want them to be shown.

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

One thing, don;t think of them as being imported in any one particular order.
The order of the images is completely fluid, you can change it anytime you want to suit your needs at that particular moment.
As Léonie showed you select the order you want to see the images in by selecting the item you want to sort on in the pull-down.
The only time fluid sort order can be a problem is when you export groups of images. If you put the images into a particular order in Aperture when you export them and view them in the Finder the order they are in may very well be different. In this case you could give names to the images that include a sequence number or index.
Then when they are viewd in the Finder they will be in them same order they were in in Aperture.
regards

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Click and show in any order

Similar Messages

Maybe you are looking for