Click "Burn CD" and get told to "Insert Blank CD
I click burn cd and get a message telling me to insert a blank cd and then my blank cd I have in the drive gets automatically ejected. I don't get any other error message and this happens every time. I've tried reinstalling itunes as well as totally removing itunes from my computer and downloading it again, and I still have the problem. I have the most recent version of itunes, 8.2 I believe.
Any ideas/solutions would be greatly appreciated. Thanks in advance for any help anyone can provide.
Seems relaunching the Finder fixed it for me. See this thread: https://discussions.apple.com/thread/216789?start=0&tstart=0
Similar Messages
-
Why do I keep getting a message "insert blank disk" when trying to burn playlist to cd?
Why do I keep getting a message "insert blank disk" when trying to burn playlist to cd? I can import burned cds to iTunes just fine, but cannot burn playlist to disk.
because you have to be using a blank cd-rw or cd-r.
-
When I invite someone to join my family share they click on accept and get an error message that they cannot join family share
Lori --
What can I say, but thank you, thank you and thank you!
Your timely response saved the day -- it was a little hairy there for a while, with .jpg files all over the desktop, but after resorting to pen and paper (still necessary at times) and recording the numbers of all files, I am now good to go.
The little green star and the bogue award of 10 points doesn't begin to convey how helpful your post, but it's all we're given (plus these words, of course).
To briefly sum up -- This morning (after the debacle last evening that started all this) I was trying to reconcile myself to the fact that my photos were lost for good and that I had only myself to blame.
Now, I have all my photos back (more than 200 hundred, some of them really kind of cool, if I do say so myself) and all are now sitting nicely in iPhoto waiting to be manipulated, edited and otherwise toyed with.
All thanks to you, Lori.
Not that I wish the heartache I just went through over the last 24 hours on anyone, but I do hope that I get the chance to help someone out as much as I was helped out today. Good Karma and all that.
This site flat out rules!
Thanks again.
-- JDee -
I can not open new tabs.If I click on a link,say in my e-mail,the link will open in new tab,but I can't click on new tab and get it to open!
== This happened ==
Every time Firefox opened
== Today-06/28/2010Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
This has been going on for weeks. I've deleted and reinstalled Firefox at least a dozen times.
After EVERY search, I click the site i want, and get redirected to a completely different site.
Not to mention Firefox crashes quite a bit.
== This happened ==
Every time Firefox opened
== A few weeks agoJailbreaking devices is a bad idea (and for most people, it's really old school). Update the devices to iOS 7 and all of your problems should go away.
-
Can't click on destop and get desktop since 10.5.2
I've suffered like so many other with the disappearing hard drive icon, but if
I opened a new window by clicking on the desktop, I could get to it. And of
course, that hasn't been fixed in this update.
I upgraded to 10.5.2- now I click on the desktop and nothing happens. I
can have no other programs open and it still will not go back to the Finder.
Am I the only one?Clicking desktop does not set focus to finder for me since 10.5.2. I have no solution, but try this... open any app with a blue barber pole progress bar (like starting a software update) and check to see if the desktop click issue has gone away!
This is quite bizarre. It is repeatable on other things like backup.app or repair permissions... anything that displays one of these progress bars seams to fix the problem. It also appears to fix the poor video performance.
Of course, once the bar disappears and you switch focus to another app, the problem is back. -
Burning CDS and Getting Track Names
HELP! I cannot figure out how to get track names on CDS that I burn. Instead all i get is TRACK 1, Track 2...
What setting needs to be changed on the latest version????Have you posted this question twice? When you click the "Burn" button a window will come up. You can select the box for "included CD text". However, it is possible that it still won't work as is the case for me. I'm trying to find an answer but finding only aggravation as usual when I need support for iTunes.
-
How do I get back the little Fox logo that you can click on to get to Personas? He seems to have disappeared! I've tried the Tools-->Options at the top of the screen, I've tried the Wrench symbo (Toolbar Options), but there seems to be nothing there to get the Fox back. Help!
Nevermind...problem solved!
-
This has happened after my last two updates of Firefox. I keep hoping the bug has been fixed but not yet apparently.
Duncanray10 wrote:
... I keep getting a message stating my ipad needs software to be 10.6.3. ...
You are misreading it... it is referring to iTunes on your computer...
Download and Install the Latest version of iTunes onto your computer...
http://www.apple.com/support/itunes/install/ -
Open Dynpage from other Dynpage on clicking a link and get user parameter.
Hi All,
I have one application in which i am displaying the data based on the user data entered.
On that page i have written a loop to display the records. Also i have a link there stating "More Details".
If i click on the link of More Details, then remaining data for that should be displayed on the new page.
I am able to open a new page but unable to get the data which for that. in query.
I am using HTMLB control with javascript.
Pls help me out.
Regards,
Dhruv ShahHi,
You can do that in two ways...
1. If you are having QuickLink for your pages(of corrosponding Applications)
then,
On Click...
call a Java Script function where you can pass a request parametre to the new page...
some thing like this..
//Script
function onMyClick(parametertoPass)
location.href="/irj/portla/PageQuickLink?RequestParamName="+parametertoPass;
//Whre PageQuickLink is the QuickLink for the More Details Page that you set in Portal
//End Script
Now in the Details Applications(page what you are opening on click of more)
inside the component/DynPage
String s=request.getParametre("RequestParamName");
2. If you are not using Page QuickLinks...
Then,
only change you have to do is...
//Script
function onMyClick(parametertoPass)
location.href="/irj/servlet/prt/portal/prtroot/ApplicationYouWantToOpen.ComponentName?RequestParamName="+parametertoPass;
//For Ex. If the application you want to open is
//ProjectName : MyDetailsProj
//ComponentName : MyDetailsComp
//Then your
location.href="/irj/servlet/prt/portal/prtroot/MyDetailsProj.MyDetailsComp?RequestParamName="+parametertoPass;
//End Script
Regards,
Srinivas.
Edited by: srinivas sistu on Aug 12, 2008 11:10 AM -
Click download button and get "413 Header Length too Large"
I'm trying to download photoshop elements. After I click on the 'download' text I am redirected to a page that says
413
Header Length too Large
Any idea how I can get around this???Try downloading from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
or http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html (note the Very Important Instructions on that page)
If you still get problems, try a different browser. -
Click on Download and get Photoshop Downloading Now but nothing happens
Hi,
I have bought the monthly single app usage for Photoshop and I'm trying to download the second license for it onto my iMac. I have already installed the first license on my MacBook.
I logged into my account and I navigate to the App page. There is no button for download anymore, there is just a link. When I click on the download link, it just automatically sends a message at the top of the screen saying "Photoshop Downloading Now..." and then sits there doing nothing for hours. There is no active download on the iMac.
I have tried this several times.
Any thoughts on how to fix this?
Thank you!
Best,
RebekkahHi,
You may also download the Adobe Creative cloud desktop application from the link below and then install the Photoshop through it:
Creative Cloud Help | Creative Cloud for desktop
Regards,
Sheena -
details are covered in the above question.
It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images. -
I've tried my email address and Apple password, my Apple ID and password and my Name and password, and none of these are recognized. But I know each one is correct! All I want to do is download an updated version of Adobe Flash Player.
What is the actual text of the prompt that you are trying to answer? If it is asking for an admin id and password, that will differ from the things you say you have tried.
-
What does one do if you go to the app store on an iphone 5c and all you get is a blank
screen?Hi hs from sc,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if you only see a blank screen when you visit the iTunes Store or App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy
Maybe you are looking for
-
Search Button in Transaction SM30
Good Morning, I want to know if it's possible to activate de search button in transaction SM30. What i mean is, when you call transaction SM30 and you choose to modify some data from a table, the search button (binoculars) is deactivated. It looks to
-
ASUS G75VX Notebook I moved HDD into drive bay 2 and put SSD in drive bay 1. Used Samsung Data Migration software tool to clone HDD-to-SSD. So far, disk management window says both drives match (numbers wise). Reboot and enter BIOS, changed boot opti
-
Why do i keep getting a notice from Itunes saying: "The Itunes library file cannot be saved. You do not have enough access privileges for this operation" every time i add music my Itunes library?
-
How to resolve "The specified Server could not be found" issue
I reinstalled my Mac OS X. (Format and and install) Installation was successful but i can't connect to the world(Internet.) Whenever i start Internet explorer it will prompt me "The specified Server could not be found" MY current Settings: Configure:
-
Hi folks, Which table is stored in the error log ODI? Tks!