Click here to view the pair(s) you have already registered: Empty white page???

Hi
I want to register a ne Script ID/Name pair (Link: Register a Script ID/Name). Before, I want to have a look about the already registered pairs (Link:Click here to view the pair(s) you have already registered). But this shows an empty, white page to me. But I am sure I have registered IDs/Names and if I used a wrong accout there must be another page than a white/empty one.
Where can I have a look for the already registered pairs?
Why is that page white???
Any ideas?
I tried it with Fireworks (Windows) and IE 8 (Windows).
Thanks
Hans

This one?
http://www.adobe.com/devnet/indesign/prefix_reg.html
I checked - it seems to work for me; it leads me to
http://partners.adobe.com/public/developer/indesign/script/scriptid_dsp.do
which shows all my registered stuff...
Cheers,
Kris

Similar Messages

HT201077 If you are seeing the message "Photo Stream is not enabled. Sign into iCloud to view Photo Stream," and you have already signed in, apply your settings to enable Photo Stream.

I have done everything that the Apple manual suggets to insure that I can transfer photos from my IPHONE to my Windows Desktop via ICLOUD. For some reason it still says that my ICLOUD (on my desktop) is not enabled!
Can anyone help...please!
Thank you!
Ellen

First make sure iCloud and Photo Stream are installed on your PC. Connect the iPad (or iPhone) to your PC with the USB cable and start iTunes on your PC. Once your iPad/iPhone shows up under "Devices" in the sidebar (which you may have to enable), click it. Then click "Photos" at the top of the iTunes screen on your PC. Check the "Sync Photos from" box, and then under that, click "Selected folders." (Ignore the pulldown menu to the right of "Sync Photos from" -- the important thing is to tick "Selected folders.") A pane should open up below that with a list of folders including "Photo Stream." Choose that and then at the bottom of the screen click Sync. This worked for my Windows 7 box.

How do you change the tempo after you have already openned the project

Is there a way to change the tempo? I know you can set it as you create the new project, but once you have created it, can you change the tempo, particularly on the metronome? And is there a way to hear it without hitting record?

on the left side of the numerical display click and select "project", then click on the tempo to adjust it.
the metronome can only sound during record and playback (if selected to in prefs)

HT1725 When I click on a Movie I get the following "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu." Then get err = 11111

iTunes quit unexpectedly during the download of a movie. When I click on that movie now I get the following message: "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu."
I follow the instructions, but the download still doesn't resume - err = 11111
Any advice?

Yeah, I am going to blast my iPhone for the 4th time today and pray this goes away. I had 6 apps showing updates, the 6 badge icon shows on the App Store on my iPhone and, having run them all, the 6 apps have two copies each on my iPhone: one that is the old version of the app and will not run and the other is a faded version of the app with an empty progress bar on the icon. Click those and you get an error message about connecting to iTunes, etc. as described in the article I linked to above.
It gets stranger than this. If I install a completely NEW app, the 6 that are stuck mid-update heal themselves and appear with the new version only, however now completely different apps (Hold Em for instance - which I did not update and didn't need an update) will not launch "app name Cannot Launch" message comes up.
Agh!

You have been redirected to this page because the requested url is invalid.

When I tried to update my profile in the Apple career web site, I always got the following error: "You have been redirected to this page because the requested url is invalid." Does any one know how to fix this problems? I have tried 10 times in different browser - chrome, firefox, IE, Safari/Macbook.

I just updated my wife profile under "https://jobs.apple.com" and it succeed. I'm not sure when update profile and click Confirm button, what apple server try to do. Are they try to match user information or ...?
I still cannot update my profile. Any one know what's going on after click Confirm button?

Just like you have a url for a page is there a url for a portlet

just like you have a url for a page is there a url for a page portlet... so that you can change the content of a portlet on page to another page in the portal

just like you have a url for a page is there a url for a page portlet... so that you can change the content of a portlet on page to another page in the portal

"Click here to download the latest map app..." here's what you need to do...

It looks like they're pushing out the googlemap -> Bing maps update to the palm pre handsets now. The process they've come up with is kind of flawed. It's probably best to just go to the app catalog & download the new map app directly. If you wait for them to push it to you, what happens is that once you start googlemap, instead of going to the map app, it shows a hyperlink text stating "click here to download the latest map app." Clicking that link will keep you in the googlemap app, but will display a webpage designed for a full-size browser experience. You will have *no* way to zoom in to see any of the text. It's all miniscule gibberish.
Here's what you need to do. Everything you need is on the left hand side. The first field is a drop down letting you pick your country. Then, there's a field where you enter in the phone number associated with your palm. Then there's a check box that you need to check indicating that you've read whatever gibberish was written on the left side. then you click the big grey button on the lower left.
It sends an sms message to you allowing you to link to the appropriate app download. like I said...it probably would've saved you effort to just go directly to the app catalog.
Post relates to: Pre p100eww (Sprint)

This was helpful, thanks.

Clicking on "click here to activate the adobe flash plugin" does not work

"click here to activate the adobe flash plugin"
clicking on this does not do anything.
I am trying to get away from the WaterFox 'click to use' interface which is a pain in the neck as hardly anything works today. Now I have a similar problem in FireFox.

hello andy, if you don't want to use click to play then disable it again - enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''plugins.click_to_play'''. double-click it and change its value to '''false'''.

HT1657 I rented a movie a few hours ago and never finished it. I can't view it on my Apple TV nor on my Computer. When I go to rent it again it says you have already rented this movie, but I can't find it anywhere. How do I watch the remainder of the r

I rented a movie a few hours ago and never finished it. I can't view it on my Apple TV nor on my Computer. When I go to rent it again it says you have already rented this movie, but I can't find it anywhere. How do I watch the remainder of the rental?

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

I want to gift a season that I have purchased. When I select the season I am not given the gift option, only "you have already purchased this season" Help....I'm trying to give Apple money here!

I want to gift a season that I have purchased. When I select the season I am not given the gift option, only "you have already purchased this season" Help....I'm trying to give Apple money here!

Another poster said that if you sign out of your iTunes Store account, go to the item you wish to gift, and select "gift" and go through the purchase process, it will then ask you for your account information and send the gift. I haven't tried this myself, but it's worth a go.
Regards.

An update is required to use Folio Builder. Please click here to download the Folio Producer tools.

Hello,
I'm using CS 5.5, Mac OS 10.8.4. I've spent the last two nights trying to figure this out but I am really stuck this time... I think the issue I'm having is similar to IDEAMAN1 but I got lost on his advice after trying some stuff out, so help would be greatly appreciated!! (I'm only medium-level tech savvy...)
Trying to create my first epublication. Downloaded FolioPanel v26 and installed it, then FolioProducerTools v27 and installed it. Realised I had stuffed it up so uninstalled both using the uninstaller. Re-downloaded FolioProducerTools v27, FoiioPanel v27 and installed in that order and popup said the updates were ready to go. Opened InDesign and folio builder panel said "An update is required to use Folio Builder. Please click here to download the Folio Producer tools.". The link brought me to http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Macintosh which is where I downloaded the original files anyway.
So I've tried uninstalling, restarting the computer, trashed preferences, closed CS5.5ServiceManager, reinstalling heaps of times and not sure what I should try next. Please help!! Thanks!!!!

That notification is often a bug.
I get it regularly when I launch InDesing while connected to my Thunderbolt Display.
If I disconnect my Macbook from the Display, relaunch InDesign it works fine - reconnecting to Thunderbolt display after this also still allows the Folio Producer tools to load properly.

HT4064 how to do you stop the issue when you have to click several times on your ipad to get into anything?

how to do you stop the issue when you have to click several times on your ipad to get into anything?

I think you have enabled VoiceOver; turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

HT201272 I pre-ordered a book. Will not download. When I follow the instructions and click download is states you have already purchased. Any ideas??

P re-ordered a book from the app store. notified to download. When I follow the steps to download it states you have already purchased. Any ideas??

Does it show in the Purchased tab in the iTunes store app on your phone, and/or the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes ?

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

I keep getting this pop up. This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? Can you please help me figure out how to get this to stop!

This pop up has been occurring about once a minute when I am on certain sites.
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
How do I get it to stop?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Click here to view the pair(s) you have already registered: Empty white page???

Similar Messages

Maybe you are looking for