Click Noise when pasting from the same track

Hi everyone, it happens that i want to extend a music track with itself. When i copy a region and then paste it at the end, in the transition it sounds like a stapler sound, and very hard sound. The thing is that the music is for relaxation and definitely it can´t sound like that. What can be happening and what can be done?
Thanks a lot
Shankara
Note: I don´t know if i can insert an example of the noise here.

When you say "tone jump" do you mean you can hear the change in the background noise of your recording?  If so, a few things for you:
First, be scrupulously accurate when you record.  As far as possible, work in a room where the acoustics are controlled and the background level doesn't change.  If you can't control the room, a device called the "sE Reflexion Filter" used properly can really help but don't be tempted by cheaper imitations which just give you a boomy, boxy sound.  When recording, get a good, accurate level check, set the level then don't change things through the session.  Adjusting the record level also adjusts the background tone.
Second, a trick used in film and other audio recording is to record a few minutes of the room atmosphere with no dialogue or other sounds going on, then put this in the background of the whole track behind all your edits.  It may seem counter intuitive but having a continuous room sound running in the background is quickly not noticed by the listener but helps cover changes when you edit.
Third, go to Edit/Preferences/Data and make sure the two boxes related to smoothing transitions are ticked.  You can also play slightly with the durations these options default to.
Fourth, try working in Multitrack View and do non destructive edits.  If you work there and overlap your clips slightly, Audition will do an automatic crossfade for you--you can configure the crossfade using the little box in the corner of the clip (the one with a diagonal line).   Using cross fades will help disguise your transitions.
The reality is that getting the recording as near perfect as possible is the best bet, then using the other tricks I list to smooth things farther will be your best bet.
However, if I've misread what your problem is, I've done a lot of typing for no reason!

Similar Messages

  • Desktop makes strange clicking noises when resuming from hibernation

    Hi  I have a three week old HP Pavilion Desktop 2022 running Windows 7 Home Premium.    I have noticed over the last few days that if  I leave it in hibernation mode for quite some time, when I wake it up Windows starts perfectly but I get 7 or 8 strange clicks from the desktop unit itself.   The desktop doesnt do this during normal startup or restart only when coming out of sleep or hibernation??  Does anyone else have this issue?  Is it normal as I realise whilst in hibernation the fan is not running and it has been extremely warm.  It does sound a bit like  a cooling noise but hope someone can reassure me regarding my concern.  Thank you, all answers are apprecaited.

    I'm gonna just say it - Hibernate doesn't work all the time. I've never trusted it, never used it and recommend that no one use it. 
    there got it out of the way.
    Why did I say that - If you don't plug anything into your PC (cameras, printers, scanners, phones, etc) Or load any other software except for updates from MS and your virus protection, then Hibernate works awesome...
    but as soon as anything is added... that app or piece of hardware needs to conform exactly to all the Hibernate specifications and sometimes they don't and they cause some problems.
    So the fact that you had a bluescreen means something isn't playing nice. That dump file can be evaluated, but I would start isolating the problem by removing any hardware you've added to see if that helps.
    Or - don't use Hibernate - shut it down when you don't use it, and power on when you do
    hope that helps and that I don't sound to terrible
    good luck
    bill
    I'm a HP employee

  • Clicking noise when you press the volume controls ?

    Hello !
    Is there a way to turn off the anoying sound effects when you press the volume level keys ?
    Thanks &
    Take Care
    Roy

    Temporarily: Hold the Shift key while you press the volume controls.
    OR
    Permanently: Disable "Play feedback when volume is changed" in the Sound Effects tab of the Sound Control Panel.

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • When clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[Ticon.in/nte/kuz/.exe/xhdoe515bvo3

    suspicious Maleware / Trojan.
    == This happened ==
    Every time Firefox opened
    == I tried to access a website

    Hello "Morbus",
    Thank you for your quick and informative reply. First I would like to provide more information on this attempted Malware/Trojan. I have copied the full addresses for you and/or anyone who may have interest. It follows below.
    28.06.2010 07:38:00 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\program files\Mozilla Firefox\Firefox.exe ( 5436 ) ]
    28.06.2010 08:14:44 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 4476 ) ]
    28.06.2010 13:32:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 1988 ) ]
    28.06.2010 17:51:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5400 ) ]
    29.06.2010 13:31:03 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 2444 ) ]
    29.06.2010 23:15:14 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 480 ) ]
    30.06.2010 09:36:22 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5164 ) ]
    30.06.2010 22:31:52 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 3600 ) ]
    I had failed to mention in my previous comments that each time the attempted attacks took place, a blank Adobe PDF page appeared. As you suggested, I disabled the Adobe add-on and have had no further attacks. I am extremely dilligent in keeping my SuperAntiSpyware Pro, AvastAntiVirus 5.0, ThreatFire, Vista Firewall Control, Malewarebytes and Windows Defender up to date. However, after any attack I always run these in safe mode just as a precaution. I had suspected the Adobe drop-in may have been the culprit because of the page that appeared and your suggested fix has in fact fixed it!
    Thank you again for your unselfish time in coming to my rescue. "Deaf Dave"
    From: [email protected]
    Date: 7/1/2010 12:53:40 PM
    To: [email protected]
    Subject: Reply notification: when clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[ticon.in/nte/kuz/.exe/xhdoe515bvo38d
    "Morbus" has posted a reply to a thread you're watching.
    You can view the thread and reply at the following URL:
    https://support.mozilla.com/en-US/forum/1/714170#threadId714337
    Message:
    Hello Deaf Dave.
    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    Also, it's possible that your system is infected with malware. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
    SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
    AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
    Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
    Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
    If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.
    Did this response solve your problem with Firefox?
    Yes, this solved my problem (click here):
    https://support.mozilla.com/tiki-feedback.php?id=714170&hash=6d5f163b3092b464aa15d04188b5cca2&type=forum_topic&feedback=Firefox%20Support%20Forum&commentId=714337
    No, this did not solve my problem (click here):
    https://support.mozilla.com/en-US/forum/1/714170?hash=6d5f163b3092b464aa15d04188b5cca2#form
    If you no longer wish to receive notifications for this thread,
    visit the following URL to cancel your subscription:
    https://support.mozilla.com/tiki-cancel_watch.php?section=forum&hash=6d5f163b3092b464aa15d04188b5cca2

  • Importing Markers to the same track from 3 different files

    Hi all,
    This is a marker question:
    I have about 60 minutes of video and I originally have it in 1 big file (export from FCP, then compressed with chapter marker so that they will be imported into DVDSP). I have no problem with importing the markers from FCP->Compressor->DVDSP.
    I broke up 60 minute file into 3 smaller files (so that I don't have to re-export/compress the whole 60 minutes worth of material when I do revisions). However, when I try to import these 3 smaller files into the SAME track, only the first one that I import carries over the chapter marker, the 2nd and 3rd don't.
    What can I do to get the remaining markers imported from the 2nd or 3rd files?
    Any help appreciated!
    Aa

    Hi all,
    Just figured it out: I right click on the clip and the choose "Import Embedded Markers". So that solves the problem. Just unsure why it didn't do it automatically.

  • When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

    When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

    Can you access the images with Image Capture (in your Applications Folder) ?

  • ITunes match tracks different volumes from the same album

    Using iTunes Match.  Among other reported problems, after downloading Matched tracks to my master iTunes library to replace lower bitrate versions, the new tracks from the same album have different loudness or volumes between the tracks.  Is this because iTunes Match is matching the songs to different versions of the same album?  Where some albums have been 'remastered' or such, that the recorded volume between the albums is different?  But instead of matching tracks to the same version of the album, some are being matched to different versions of the same album?
    Quite offputting to listen to a single album where track to track loudness changes suddenly.
    PS, I'm not using SoundCheck on my Mac.

    Same problem here. I'm an "album" kind of music fan and when I'm listening matched albums that the sound quality and voulme changes I get really put off. Case in point B-52's self-titled album: tracks 1,2, 5 & 7, nice and loud; 3, 4, 6, 8 & 9 tiny sounding in comparison...Hello?  So far iTunes Match is not worth my money. I'd like to hear form an Apple iTunes Match repersentative to know if this issue will be resolved. As it is, is not very useful. Please fix the problem. Also many of my albums show that a track or a few will not be matched but uploaded to the cloud which means more of my albums will be spotty sounding as tracks will have different bit rate, etc. There is no real excuse for not matching whole albums as oppose to single songs. I read somwhere the 'typical" case of the Beatles "Abbay Road" album not matching "She Came In Through The Bathroom Window" on most users. I think is silly to say the less. Albums matching not single songs, please!!!

  • Move DC from one SC to another SC in the same track

    Hi colleagues,
    I am facing a problem when I try to move a DC from one SC to another SC, in the same track.
    This track has all custom applications developed by my team. It happens that our custom applications were all in one Software Component, and we want to have one SC per application.
    I followed the steps described in SAP Note 888969(and also this tutorial: http://wiki.sdn.sap.com/wiki/display/JDI/StepbyStepguidetoMoveaDCfromoneSCtoanother).
    I could successfully Integrate all components of the DC in the new Software Component. Then I did check-in and activated it. Everything fine so far.
    In the last step of copy/create the .dcref file in the TOP-Level DC folder, I did as described: have created an empty file with the same name and extension as the existed file on the old SC (new activity created). Then I checked in and on Activation phase I get an error: "Error! The following error occurred during request processing.  /gems/clock' is already active in the compartment 'GEMS' and cannot be activated in the compartment 'ESS_CLOCK_IO'.
    Does anyone had this problem before or have an idea how I can fix this problem?
    Thank you in advance,
    Regards

    For future search:
    I can suggest the movedc command of the guide
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30d8e1f6-a372-2b10-65af-8a366b91eba7
    Regards,
    Ervin

  • Hi, iTunes 11.1 don't tell me the duration of two or more tracks from the same album, which iTunes 10. did. How come? It is possible that the new version lacks such a possibility? Thanks

    Hi, thanks to whoever will be able to respond - which the Apple assistance on line in Italy could not do, after minutes of conversation!
    The point is that I cannot see anymore the total duration of two or more audio tracks selected from the same CD, but only the duration of the whole CD.
    With the previous version of iTunes this was very easy, as I simply clicked on the tracks the interested me and I suddenly had the total time.
    It makes no sense that Apple provides a new version which lacks one of the endless options of the program, therefore I hope it's only my faul in not being able to understand what to do. Otherwise, please tell me how can I downgrade and go back to iTunes 10....
    Paul Meadow

    Press CTRL+/
    tt2

  • I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

    After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making  a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

    Clicking sounds from an iPod that has a hard drive for storage is not a good thing.  It usually means the hard drive is faulty.  That is the likely reason for getting an error during the attempt to Restore.
    If you use a Mac, you can try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility.  Does the iPod appear in the Disk Utility sidebar?  If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one).  Go to the Erase tab.  Set the Format to Mac OS Extended (Journaled).  Name does not matter.  Click on Security Options and choose to write a single pass of zeros over the entire disk.  This serves as a good "stress test" for the iPod's hard drive.  Back on the main window, click Erase.
    This takes longer than a regular erase, but you should see steady progress.  If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
    If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

  • We have an imac 27, with 2 accounts.  We share a Canon 9000 II printer, wired..  If my wife prints a photo it printes perfectly  When I print the same pic from my  account, overall dark magenta cast. Ideas????

    We have an iMac 27, wife and I each have an administrator account.  When she prints a pic from iphoto, or from  the web, the colors are perfect, they match the monitor.  When i print the same pic from my account, there is a dark magenta cast overall.  Same printer, same driver, same paper.  Using a Canon 9000series II printer, connected by wire.  This is a new phenomenon.  Using new inks, cartridges are full, all lit.  Any ideas what could be causing this weird phenomenon???

    When i print the same pic from my account, there is a dark magenta cast overall. 
    what happens when you print from your wives account?
    This is a new phenomenon. 
    When did this start, when you installed a new OS, applications, new Mac?
    A first step is to reset the printer from your account:
    Apple Menu > System Preferences > Printers: right click in the list of printers and select Reset Printing System

  • I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to downlo

    I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Why does my MacBook Pro make clicking noises when pressure is applied to the unibody?

    I purchased a MacBook Pro in late July of this year. Recently, I have noticed that when I begin to type on the keyboard, the unibody will make a faint sound when pressure from my hands is applied to the MacBook. I also notice a faint clicking noise when I pick up the MacBook Pro to move it somewhere. Additionally, the screen hinge makes a faint clicking noise when the screen is opened. Are these sounds normal?

    Check if an AASP (Apple Authorised Service Provider) is closer, as some do not trust Geek Squad to diagnose something as simple as "all the keys are missing". But judge for yourself.: http://support.apple.com/kb/HT1434

  • When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

    When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

Maybe you are looking for