Click on Button

Hi,
Can you click on a button "Validation" in Sdk
if so how?
Thank you

Hello Didier
It is easy
You can open the form, and when you finished the filling have 2 ways:
1. Determine the "OK" button Item ID (basically 1, but can be different eg: service call is 9) and say click
SBO_Application.Forms.ActiveForm.Items.Item("1").Click(BoCellClickType.ct_Regular)
2. or just simpli sending an enter key to the application which pressed the default button
SBO_Application.SendKeys("{ENTER}")
By this the active form (you fill in - opened by you) is getting closed.
Regards
J

Similar Messages

HT201209 Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

Get the redeem code from the KLove page:
http://www.klove.com/music/store.aspx
...and enter it into the Redeem Code box in the iTunes Store.
You will have to sign in to your iTunes account.
It worked fine here. If that doesn't work for you, let us know what went wrong.

Was typing an e-mail -trying to find "printer" - clicked SOME button now can't get back to my e-mail also top of page is missing/can't get to go down

Went thru mozilla to business e-mail account/wanted to make a copy of notice to be sent/was clicking different buttons to find a "printer" all of a sudden the whole page went up and the top (bar,browser,everything disappeared) now can't find anything of mine only info to download mozilla??

That was helpful but it didn't solve the problem. There were two red dots, now only one, though I copied and pasted the same password in both places. (I don't recall having to change the password in two places before).
The red dot next to smtp.mail.me.com:(myname) disappeared
The red dog next to smtp.me.com:(myname) is still there. It says, "trying to log in to this SMTP account failed. Verify that the username and password are correct."
Thanks,
Lizzy

I requested a repair, but there was an error after clicking the button with my credit card info. I was still charged, but the form email I received the next day had incorrect info about my iPod Touch problem. How can I contact CS w/o paying $19?!

My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!). Anyhow, I checked my credit card and it was charged, so I assumed the repair request went through. The next day I received a form email saying my problem was with "Sync with iTunes (Not iCloud) - Data Backup/Migration (not iCloud)" instead of the battery repair. It also says for iPod customers, to send your iPod to Apple - but I had requested the "iPod Coffin" to be mailed to me so I could send it back. Obviously there was an error between the request and what was received, so I'd like to ask Customer Service about it. However, I can't find a way to contact them. When I replied to that form email, I recieved an automated reply saying emails there were not read. Anything online asks me to pay $19 and I don't have the correct issues to request an exception. The closest store is over an hour away or I'd simply go there to ask. What can I do?! Any suggestions you have are much appreciated. Thank you!
PS - The form email also says if I wait 10 days the repair request will be canceled. Does this mean my credit card will be refunded for the $85 battery replacement charge if it is canceled automatically?

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

How to call a swing form from another swing form by clicking a button

i created a swing frame , this frame have a form and an internal form. in this form have 3 buttons OK , CANCEL , NEW. i created some other forms i.e OKFORM, CForm,NForm. i want to invoke the OkForm when i click OK Button, Similar implimentation for other buttons too. i want the button logic to invoke other form. please send reply ASAP.

A great resource that has helped me and will probably help you is an article entitled [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] . It will tell you how to formulate your questions so that the folks here will be better able to answer them.
For instance, just what is a form?
I notice that you've posted twice before and that both posts stimulated responses like mine, responses that asked for clarification, and that you never replied in either of the previous threads. Again, I urge you to read the link above ASAP, else you will find fewer and fewer people interested in helping you.
Good luck.

Trying to makea report run when clicking a button on a form

I am trying to run a report by clicking a button on a form (Forms 9i)
I have modified the registry settings for FORMS90_PATH and REPORTS_PATH to include my development directory, and now at last the report is generating. However the command to display the form in a window is not doing anything at all - no error even. Can someone please help, the trigger code for my button is displayed below:
DECLARE
     rep_result VARCHAR2(30);
BEGIN
     SET_REPORT_OBJECT_PROPERTY('INVENTORY_REPORT', REPORT_FILENAME, :GLOBAL.project_path || 'Inventory.rdf');
     SET_REPORT_OBJECT_PROPERTY('INVENTORY_REPORT', REPORT_DESNAME, :GLOBAL.project_path || 'Inventory.htm');
     rep_result := RUN_REPORT_OBJECT('INVENTORY_REPORT');
     --MESSAGE('Rep result: ' || rep_result);
     WEB.SHOW_DOCUMENT('file:///' || :GLOBAL.project_path || 'Inventory.htm', '_blank');
     --WEB.SHOW_DOCUMENT('file:///C:\Temp\Dev\Inventory.htm', '_blank');
END;
thx
adam

Hi,
may be this could be helpful for you:
You have to include the following code to execute a report:
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status Varchar2(20);
BEGIN
repid := find_report_object(report_name);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,report_server_name);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
if rep_status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
else
error report not exists
end if;
END;
Also you have to create the report server with the command:
"rwserver - install service_name autostart=yes
report server name must be the same that appears in the code above
You must add the report to run in the REPORT object type in your .fmb and put there with the same name
The report server to install ought to be the one and only in you network to avoid mistakes...

Pop up on clicking a button

Hi All,
Problem : There is a custom screen in a CRM Transaction. In the screen there is a table which displays data.and there are a few buttons which provides a few functionalities like delete records, display attachments etc. The functionality is provided in a CASE statement. The problem now is I need to provide a popup as soon as the user clicks on a button. this popup will display a list from a table.
I am not able give a popup when i click the button. this will be something like when i click a variant button on a report screen it displaying the list of variants and one of the variants being selected. How do i provide this funtionality it ?
Thanks,
Amit

hi,
chk a sample code.
report zsha_0001.
type-pools: slis.
data: begin of iku occurs 0,
      check type c,
      kunnr type kna1-kunnr,
      name1 type kna1-name1,
      end of iku.
data: ifldc type slis_t_fieldcat_alv .
data: xfldc type slis_fieldcat_alv .
select kunnr name1 into corresponding fields of table iku
        from kna1 up to 10 rows.
clear xfldc.
xfldc-reptext_ddic    = 'Customer'.
xfldc-fieldname = 'KUNNR'.
xfldc-tabname   = 'IKU'.
xfldc-outputlen = '12'.
append xfldc to ifldc.
clear xfldc.
xfldc-reptext_ddic    = 'Customer Name'.
xfldc-fieldname = 'NAME1'.
xfldc-tabname   = 'IKU'.
xfldc-outputlen = '30'.
append xfldc to ifldc.
call function 'REUSE_ALV_POPUP_TO_SELECT'
     exporting
          I_TITLE = 'This is the message here'
*          i_checkbox_fieldname = 'CHECK'
          i_tabname            = 'IKU'
          it_fieldcat          = ifldc
     tables
          t_outtab             = iku
     exceptions
          program_error        = 1
          others               = 2.
check sy-subrc = 0.
**********anothe sampel code**
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING ENDPOS_COL = 41
ENDPOS_ROW = 10
STARTPOS_COL = 1
STARTPOS_ROW = 1
TITLETEXT = TEXT-202
IMPORTING CHOISE = SEL_ROW
TABLES VALUETAB = ITAB
EXCEPTIONS OTHERS = 99.
IF SY-SUBRC EQ 0 AND SEL_ROW > 0.
READ TABLE ITAB INDEX SEL_ROW.
REF_NAME = ITAB-TABNAME.
ELSE.
REF_NAME = SPACE.
ENDIF.
Regards,
Anver
<b><i>if hlped pls mark points</i></b>

Double click Bookmarks button to open the Library window directly ("Show All Bookmarks" function)

I have a number of folders in bookmarks, and I edit it frequently by clicking "Show All Bookmarks" and opening a Library.
Previously, after clicking Bookmarks button, "Show All Bookmarks" appeared on top of the list, and now it's at the bottom.
Please, add double click function on Bookmarks button so that it opens Library window directly.

See also:
*[[/questions/997080]] Is it possible to move "show all bookmarks" in the bookmark-menu to the top?

After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

You're welcome
Are this screenshots from an extension window because the built-in about:addons page looks different?

How can I pause a slide until the user clicks a button?

I wish to pause a slide until the user clicks a button (which I've created out of a Smartshape). The thing is that I haven't added a click box object over the smartshape but have only set the smartshape properties to "Use as Button". If I were to add a clickbox object, I would get a "Pause project until user clicks" in the options section of the properties. However in using a smartshape as a button, I cannot find this option. I am using Captivate 6. Seems strange as I would have expected to see the same checkbox option even if I were to use a smartshape as a button but I dont. Can't someone help me and let me know if I'm missing something.
Of course I could use a clickbox over my smartshape to achieve what I want, but I want to avoid thsi for two reason:
I want to avoid adding another object when I dont need it.
My smartshape is a right arrow (indicating "Begin"), and I dont want a squarish click box sitting on top of a triangle because that just shows the hand pointer even if the cursor isn't exactly over the arrow button because it enter the clickbox area.
Thanks,
Sean

Select the Smart Shape button , go to Properties > Timing accordion > Pause After and set the number of seconds from the beginning of the slide for it to pause.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

All of a sudden when i click any button or link a new window opens with an ad

I have used Firefox for about 7 years. No issues...
I recently installed Ghostery add on.
The only way to describe it is:
I go to a page..
Click a link (or close to it) or enter or any other button/link that would take me to what I expect..
BUT instead it opens a new tab to an advertisement site (quibids, P&G, many other random ads) - a few of them I blacklisted with BLOCKSITE (installed after the problem started happening) but several I can't because I would actually use them when I need to (ex: Vistaprint.com)
When I go back to the original site and click the same link and click it again it works as intended.
This happens across all sites that I am on...
It is like there is a hidden link within the one I am clicking on.
I have pop ups blocked in my browser but this gets around it somehow.
Since GHOSTERY installed, some sites do not work correctly. If I click on a picture, or something that I want to expand it is as if I am doing nothing at all because it won't complete the action, the functionality is broken.
I have white listed a couple sites but this is random and if I whitelist everything I come across then it opens me back to what I am trying to avoid..
EXAMPLES:
went on Heat.com, clicked the button to go to the White Hot Gear instead it opened a new tab brandonline.com
was on LinkedIn and hit the comment button on a thread, then it opened a new tab vistaprint.com
was on publix.com, hit the order refills button, then it opened a new tab premium-promos.net
did a google search clicked on the link I wanted, it opened a new tab premiumgiftrewards.net
EACH time I go back to the original site and click the same button/link/etc it takes me where expected.
Thanks in advance for your help!

Both Firefox and IE have the same problem. The cursor instead of being a finger when pointing to a link is still an arrow. However I can click anywhere on the page and an ad will pop up. I have eliminated all unwanted bars in Firefox, I ran Malwarebytes until it came out clean. I also have AVG which had detected a few items on it's own. But when I get into Firefox I still have exactly the same problem. Now it will not let me download Browser Safeguard. Usually after one click the pointer returns to normal for a few screens. When I try to click to download Browser Safeguard it keeps bringing up different ads or it tries to get me to upgrade Firefox or some other browser helper program which I know are all BS tactics to get me to load their junk again. PLease help I'm an engineer and pretty good with PCs but this one has me beat at least so far.

Problem report only print out when i click back button

hi all..i having problem with my report print program. the problem is my report did not immediately print out when i click print button. the program require me to click back button before print out execute. please help me to solve this problem. Thank you.
Edited by: padile on Jan 7, 2010 3:51 AM

Hi,
In your program, mention the following:
DATA: gs_out_opt TYPE ssfcompop.
gs_out_opt-tdimmed = 'X'           "Print immediately
CALL FUNCTION lv_fname         "Smartform FM
      EXPORTING
        output_options     = gs_out_opt
Regards,
Dawood.

How to print PDF report by clicking a button

Hi,
I'm using oracle 10g developer suite. i've developed a form clicking a button calling a PDF report. But i do not want to show PDF report. i want to auto print PDF report by clicking a button.
Plz help me.

Just follow the Oracle reports 10g output directly to printer and you will able to print directly
Hope this helps
Hamid
If response is helpful or correct mark it.

Unable to close open apps with double clicking the button and when I tap screen does not respond?

Cannot not close open apps with double clicking the button Since downloading iOS8.

What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

How can I do to code the equivalent of: Wait ... until(click one button)?

Thanks to answer me and to send me a little code which explains the solution.
A French guy.

If you have to display a panel and wait for the user to click one button to proceed, you could use GetUserEvent ().
I use it when I have to disply a popup panel
different from MessagePopup or PrompPopup or similar and I don't want to deal with a separate callback to manage controls on that panel. Here you find an example: I display a popup for the user to input a password (using the password control in toolbox to display an input string with the usual '*****' pattern while typing).
pwH = LoadPanel (0, UIR, pwd);
InstallPopup (pwH);
PasswordCtrl_ConvertFromString (pwH, pwd_pw);
errChk (PasswordCtrl_SetAttribute (pwH, pwd_pw, ATTR_PASSWORD_MAX_LENGTH, 12);
while (TRUE) {
GetUserEvent (1, &pnl, &ctrl); // Program waits until a button pressed
// Here when a button
have been pressed
if (ctrl == pwd_quit) { // 'Abort'
button
// Exit from function, close popup...
PasswordCtrl_GetAttribute (pnl, pwd_pw, ATTR_PASSWORD_VAL, pw); // Read password
if (strcmp (pw, correct_password))
MessagePopup ("PASSWORD",
"Incorrect password. Retry.");
else
break; // Correct password
RemovePopup (0);
I use it where I don't want to exit from the actual function to manage the 'Ok' button from the popup panel elsewhere.
Hope this helps
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Click on Button

Similar Messages

Maybe you are looking for