"click on the link for each error to highlight the location of the error in the PDF file" fails

I'm working on a document which has tables in it. When I run the accessibility checker for 508 compliance, it tells me the document failed the test (g) 4 Table element(s) with no TH child elements and then provides links to the 4 tables in question. Now, when I click on those links, nothing happens. I know it is supposed to take me to the location of the problem table, and in fact this has worked for me in other documents in the past. Why is it not working now? I could really use this functionality because there are more than 4 tables so I can't tell which ones are failing the test without Acrobat highlighting them for me.
Thanks!
Maddie

Hmm, I tried that but it didn't solve the problem. When I searched for the tables there was always something in the code for the table. Also, saving the PDF to HTML really messed up the layout of the file, so it was hard to tell how well it paralleled the code in the PDF file.
However, I don't know if this would give you any ideas, but these are links from the Accessibility Report, from the list "Structure errors: 7 table element(s) with no TH child elements."
This is one that took me to a table:
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=26&high light=50,558,675,180
This is what ALL the other 6 look like (which, when clicked, took me nowhere):
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=0&highl ight=-32768,-32768,-32768,-32768
It makes me think that there are some artifact tables floating out in space somewhere, at the location "-32768,-32768,-32768,-32768."
If there was some way for me to find them and either tag them as artifacts or delete them... that might solve the problem! Do you know if there is a way?
Thanks!
Maddie

Similar Messages

Hello... I can't convert an ebook in pdf using Adobe Digital Editions... the PDF files I get are not be read...

Hello
I am a Mac User
I follow the procedures to convert an ebook into a pdf... (document ==> digital documents...) but, the pdf I find there are not redable.... this drives me nuts ! ;-)
As I click on the pdf file, it leads me to an adobe website...
Thanks a lot ! I need to stamp the book i just bought...
Thanks for your help.
Daurig.

Can you please specify the exact steps that you followed? Did you purchase the book(an acsm file gets downloaded) and try to open it?
Thanks

Is it possible to display the document link for each record in Report ?

Hi,
     Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.

Hi JAYASHREE PARASMAL ,
      Thanks for your valuable answers.
      Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
      But i can't able to get the same thing,while i executing the Repory through WAD.
      What setting i need follow in the WAD for getting the same thing.
      Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
      Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC.

I see a 40 second delay each time I click in the Local Files pane after working in the Edit pane.

I'm running Dreamweaver CS4. I have a PHP file that's about 12,000 lines and each time I want to upload changes to the server, I stop editing in the Edit pane and click in the Local Files pane, at right, so I can select the file I've been working on the then do a synchronize. But it takes about 40 seconds, while a spinner goes around, before focus is transferred to the Local Files pane and I can select my file and synchronize. It's as if Dreamweaver wants to do spell check or some kind of format check on all 12,000 lines before it lets me go to the Local Files pane.
If I do a CTRL-SHIFT + U to upload I still see the same 40 second delay before the upload starts.
Does anyone know what might be causing this?
Thanks

Just for interest sake, what is the size of the file that has 12,000 lines of code? Have you tried asking in some php forums or newsgroup if this file can be stream-lined to make it smaller and/or efficient?
I don't know why DW goes to sleep for 40 seconds but you might want to clear the DW preference file to see if that makes any difference. D W Powers wrote a tutorial on how to do this but I can't find his page. Alternatively, you can try this link:
<http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/>
<http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html>
Good luck.

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with. with a

I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.

I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to ex

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to extract Adobe Photoshop Elements 13. Please download all parts.: I've also gotten an Exit Code: 7 when trying to install. I've turned my McAfee virus system off while trying to install.

Hi,
Have you tried downloading Photoshop Elements 13 from here?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
There is only one file to download - which one depends on your system (32-bit or 64-bit).
These are the trial versions but will convert to the full version when you supply your serial number.
Brian

For email links from state of Montana employees to pdf files: Firefox pulls up a blank screen but Internet Explorer pulls up the pdf file.

Whenever I get an email from a state of Montana employee with a link to a pdf file, the link does not work - it just pulls up a blank screen in Firefox. However, when I put the same link in Internet Explorer, the link works and the pdf file appears on my screen. This prevents me from efficiently using email. Here is an example of a link I recently received: "As noted in the [http://leg.mt.gov/content/committees/interim/2011-2012/water-policy/agenda/wpic09132011.pdf agenda pdf] agenda, the Committee will discuss a variety of water-related topics..."

How do I install the Firefox plugin it's talking about on that page?
I only see directions to install Adobe Reader.
I cannot install a different version of Adobe. As I mentioned above, I do not have Admin privileges on this computer.
This is the version of Adobe that my employer has decided we will be using, and I do not have a vote.
I can change internal settings, and I can install Firefox plugins, but I can't install programs themselves - I don't have the necessary Admin rights to do so.
Thanks anyway, but I don't have the Admin rights needed to install Adobe Reader in the manner mentioned in this article. (I have the full Adobe Acrobat XI version 11.0.09).

Error opening the PDF file while sending the PDF as an attachment

Hi All,
I am sending a PDF as an attachment in the mail. I am using the code pasted on 'Jul 28, 2006 8:59 AM' subject OTF Format of Purchase Order in email unreadable.
My problem is when I open the attachment in SOST or in the mail, I get the error message "Adobe could not open *.PDF because it is either not a supported file type or because the file type has been corrupted."
Please let me know if anybody has faced such an issue.
The code is found below.
FORM MAIL_OBJECT                                              *
      This routine receives OTF data. OTF data is converted to PDF
      format and send to the Partner's email address
FORM mail_object TABLES otf_data STRUCTURE itcoo .
DATA: pdf_size TYPE i,                             " PDF Size
        pdf_itab_size TYPE i,                        " Attachment size
        mailtxt_size TYPE i,                         " Text in mail size
        l_vbeln LIKE vbdka-vbeln.                    " Order Doc
DATA:
it_mailtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,    " Mail Text
it_pdf TYPE TABLE OF tline WITH HEADER LINE,           " OTF output
it_mailpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, " Dist details
it_mailhead LIKE solisti1   OCCURS 1 WITH HEADER LINE," Header data
it_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,   " Rec List
it_pdfdata LIKE solix OCCURS 0 WITH HEADER LINE. " Attachment data
DATA: it_doc_att LIKE sodocchgi1.                 " Attri of new doc
DATA: BEGIN OF it_pdfout OCCURS 0,                " PDF in 255 length
           tline TYPE char255,
        END OF it_pdfout.
Sales doc and Customer
DATA: BEGIN OF i_vbeln OCCURS 0,
          vbeln LIKE vbpa-vbeln,       " Sales Document
          adrnr LIKE vbpa-adrnr,       " Customer
        END   OF i_vbeln.
Sender Address no and SMTP address
DATA: BEGIN OF i_addrs OCCURS 0,
          addrnumber LIKE adr6-smtp_addr,
          smtp_addr LIKE adr6-smtp_addr,
        END   OF i_addrs.
Convert OTF to PDF
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format       = 'PDF'
    IMPORTING
      bin_filesize = pdf_size
    TABLES
      otf          = otf_data
      lines        = it_pdf.
Make each line 255 characters
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
    TABLES
      content_in = it_pdf
      content_out = it_pdfout.
Create the PDF File
CLEAR it_pdfdata.
REFRESH it_pdfdata.
it_pdfdata[] = it_pdfout[].
LOOP AT it_pdfout.
    MOVE it_pdfout-tline TO it_pdfdata-line.
    APPEND it_pdfdata.
    CLEAR it_pdfdata.
ENDLOOP.
DESCRIBE TABLE it_pdfdata LINES pdf_itab_size.
Text in the mail.
it_mailtxt-line = 'ORDER ACKNOWLEDGEMENT'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--1'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--2' &
                    ' This is a test mail, Line Number--2'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--3' &
                    ' This is a test mail, Line Number--3' &
                    ' This is a test mail, Line Number--3'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4' &
                    ' This is a test mail, Line Number--4'.
APPEND it_mailtxt.
it_mailtxt-line = ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5' &
                    ' This is a test mail, Line Number--5'.
APPEND it_mailtxt.
DESCRIBE TABLE it_mailtxt LINES mailtxt_size.
Document Number for Output
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      input = vbdka-vbeln
    IMPORTING
      output = l_vbeln.
Attributes of new doc
CONCATENATE 'Order' space 'Acknowledgement' space l_vbeln
              INTO it_doc_att-obj_descr SEPARATED BY space.
it_doc_att-sensitivty = 'F'.
it_doc_att-doc_size   = mailtxt_size * 255.
Create Pack to text in mail body.
CLEAR it_mailpack-transf_bin.
it_mailpack-head_start   = 1.
it_mailpack-head_num     = 0.
it_mailpack-body_start   = 1.
it_mailpack-body_num     = mailtxt_size.
it_mailpack-doc_type     = 'RAW'.
APPEND it_mailpack.
Create Pack to PDF Attach.
it_mailpack-transf_bin   = 'X'.
it_mailpack-head_start   = 1.
it_mailpack-head_num     = 1.
it_mailpack-body_start   = 1.
it_mailpack-body_num     = pdf_itab_size.
it_mailpack-doc_type     = 'PDF'.
CONCATENATE l_vbeln '.pdf' INTO it_mailpack-obj_name.
CONCATENATE 'Order Ack' space l_vbeln INTO it_mailpack-obj_descr.
it_mailpack-doc_size     = pdf_itab_size * 255.
APPEND it_mailpack.
*Get email addresses based on Sales document.
SELECT vbeln adrnr INTO TABLE i_vbeln
         FROM vbpa
         WHERE vbeln = vbdka-vbeln AND
               parvw = nast-parvw.
IF NOT i_vbeln[] IS INITIAL.
    SELECT addrnumber smtp_addr INTO TABLE i_addrs
           FROM adr6 FOR ALL ENTRIES IN i_vbeln
           WHERE addrnumber = i_vbeln-adrnr AND
                 smtp_addr NE space.
ENDIF.
IF i_addrs[] IS NOT INITIAL.
    LOOP AT i_addrs.
      it_reclist-receiver   = i_addrs-smtp_addr.
      it_reclist-express    = 'X'.
      it_reclist-rec_type   = 'U'.
      it_reclist-notif_del = 'X'. " request delivery notification
      it_reclist-notif_ndel = 'X'. " request not delivered notification
      APPEND it_reclist.
      CLEAR: i_addrs.
    ENDLOOP.
ENDIF.
Call FM to send email
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = it_doc_att
      put_in_outbox              = 'X'
    TABLES
      packing_list               = it_mailpack
      object_header              = it_mailhead
      contents_txt               = it_mailtxt
      contents_hex               = it_pdfdata
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorizationfiltered= 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " MAIL_OBJECT
Regards,
Ajith

Hi Ajith !!
Please refer this link :
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Here a spool output is converted into PDF and then sent as an email.
I think instead of using FM to change the width, try the logic mentioned in the link.
Also instead of FM CONVERT_TO_OTF use :
1. CONVERT_OTFSPOOLJOB_2_PDF
I hope this should solve the problem.
I had referred the same program from the link and it worked absolutely fine. Also check the adobe acrobat version, i guess old version doesnt support SAP, though not very sure.
Best regards,
Prashant

Error in opening .pdf files from the search results

Hi All,
When we do the search it displays the results, upon clikc the link of .pdf files it gives error "<b>File is damaged and cannot be repaired</b>". However, subsequent click on the same link it opens the .pdf file correctly.
We are in EP50 SP50 - J2EE 6.20
Any help would be greatly appreciated. Thanks.
Best Regards,
Ravi

Hello Ravi,
It seems that there might be an issue with the compression settings. Please have a look at the note 554096 as a starting point.
Moreover a look for new patches/hotfixes on the Service marketplace in
Support Packages and Patches -> SAP NetWeaver -> SAP NetWeaver components ( < SAP NW 04 ) -> SAP ENTERPRISE PORTAL -> SAP ENTERPRISE PORTAL 5.0 -> Portal Server
might point to a fix.
Kind regards,
Roland

I have Windows 98 and need Acrobat to open up the pdf files for 5.0

I have the old system, Windows 98 and presently have the free Adobe 5.0 version on my Compaq Presario Computer, and it is a 5242 model desktop.
I have inadvertanly switched over to Compaq Carbon Copy 32 Version 5.0 but since, have uninstalled it and now, on each of what was the pdf files initially of which I have, of which is at least 16 or more, on each of those files, an error message comes up and says "PROGRAM NOT FOUND," and states the following: "Windows cannot find CCW32EXE. This program is needed for opening the pdf files." And then it has a dialogue box with the computer operational symbol in it as C:\ and then it wants me to locate it. I cannot locate it through the "auto" because, this sytem being so old, doesn't have a magnifying glass or a "search" tool to do this in the "My Computer Icon on the Desktop as the Compaq people wanted me to do. I would have to do this manually. I have already talked to the Compaq people on their chat line and because of this, they said they couldn't help me with this problem and referred me over to you.
I've tried to find a download for 5.0, though I really don't think I need one since it is currently installed. I believe the proper way to fix this is to just convert the CCW32EXE over to the Acrobat pdf files and have those files opened and should open up all of my 15 or so files altogether at the same time because they all converted over to something else at the same time prior.
Are you able to help me?
But I believe to alleviate this problem, if you could just give me the information to be able to open up the pdf files to 5.0 and find out what download I may pursue, it might be able to correct this problem. I already have the 5.0 Acrobat installed, however.

Hi Aandi,
I have followed your directions and I have the old system of Windows 98, so I had to go to "programs" and come up to Acrobat 5.0 and once in there, all of the Window there is greyed out, although I can still go to the tool bars above in it. I went to "file" and went to "open" and from there, I received an "open" window with a dialogue box in it and in that dialogue box as I scrolled down, it wants me to put in there, one of the following, "desktop," "my documents," "3 1/2 floppy [A:]," "[C:]," "system _save [D:]," ""[E:," "[F:]," ete; of these which do I pick in the "open" dialogue box? and down at the bottom, is the FILE NAME and what do I put in there? Just below that, it has the FILES OF TYPE which has there Adobe pdf Files, in it's dialogue box. I hit these, but I still get an error message of which basically says, "NOT FOUND, please put in proper file name given." And I don't know actually where it is given.
So, as you see, I am a novice in all of this and you can contact me at my e mail address which is [email protected]
and should a reply be needed, I'll come back to the forum for a reply.
I really need to open up the Adobe 5.0 pdf files. All of the pdf files, simultaneously went over to Compaq Carbon Copy 32 of which I since, uninstalled. But I really need to get back and open the Adobe 5.0 pdf files.
And I want to thank you for your support and eagerly awaiting your help.
Thanks,
Now, I did do one of the following: I went to C: which came to Acobat 3 and I hit that which came to Reader and I hit that which came to the following: ACROBAT which gave me ACTIVE X - BROWSER - FONTS - HELP - OPTIONAL - PLUG-INS

I have problem when opening a pdf page, my mouse control is hijacked to that tab when im on other tab, i cant scroll or use the middle rollling button, i have to click at the pdf tab then my control over the mouse middle button is restored.

I think I have this problem even on earlier version. The thing is I set open link in new tab and not switch over to the opened tab. My habit is to open a pdf page in the background and let it load first. What happen is that when the pdf page finished loading ( i do not set to download it), it hijacks my middle mouse button control. When i scroll down or scroll up on my original tab, it wont scroll on the tab, but insttead it scrolls on the pdf tab. I have to click on the pdf tab, then i can use the scrolling function on other tabs back. As for when i opened several pdf tabs, it seems i have to click on the tab that just finished loading, that means several times until they all finish loading. It has been getting on my nerve lately. And all pdf trouble i search from google led to unable to open pdf, firefox hang or crash when opening a pdf and the likes.

core-el, i don't see the advantage of that or i can't figure out how i'm supposed to use it. for starters, i have to click the mouse in order to get "add bookmark here" to open, which is no different than clicking on the star in the location bar, or right-clicking on the page. there are also options in the bookmarks toolbar, but they all require clicking the mouse & holding down the right button, etc.
my goal is to use keystrokes only. typing on the keyboard, using both hands, using the space bar & my left pinky finger to tab over are all painless routines for me. as soon as i have to take my fingers off the keyboard & use the mouse, the pain begins.
as i said, in older versions of firefox, all i had to do to bookmark a page was click ctrl>d, then tab over & arrow down, when appropriate, to find the folder & add the bookmark. for me, as a touch-typist whose speed is between 60 & 80 wpm, this is lightning fast.
if i have this wrong, please correct me. i just see it as more mouse clicks that don't save me time or pain.

How do I embed a pdf document into an existing pdf so that the user double clicks on the pdf object within the pdf and it opens? i've looked everywhere on various forums and tried attachments - but still not working. Thanks

I've tried various methods but to no avail. I have a pdf document and within the pdf I'd like to embed a couple pdf documents so that all the user has to do is double click on the pdf object inside the pdf and it opens in a new window. I've tried using attachments to do it and linking it...but to no avail. Anyone know how to do? I'm using Acrobat Pro Version 11. Thanks

The "embed" feature common to MS Office applications is not applicable to PDF (for the why and wherefore of PDF get comfortable and read the ISO Standard for PDF - ISO 32000-1:2008).
You can insert other PDF files' pages into any given PDF.
You can attach files of supported formats to a PDF (of course a PDF is supported).
You cannot "embed". So, nothing is broken.
Be well...

When i click on the domain file in a folder, iweb 08 opens?

I have iweb 08 installed in a separate folder . I have iweb 09 in the applications folder.
When I open iweb 09 it is pulling my files from the domain. But when I go to that same location and double click on the domain file (i have 3 saved on the computer right now as part of tests, in different places), iweb 08 tries to launch and I get an error message that the file can't be opened.
Why wouldn't 09 launch?
When I go to "get info" on the domain, I see that it says to open with web 2.0. When I change it to web 3.0, for that file or for "change all," it keeps reverting back to 2.0. It won't accept the 3.0.

I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.

"Content generation error. Failed to Export the PDF file"

Building a multi-folio in InDesign 6 Folio Builder V30. Received "Content generation error. Failed to Export the PDF file" on several of the spreads. I have tried reducing the original pdf files sizes, but that did not help.
Any suggestions on other possible causes or way to fix.?
thanks
Christopher Huber
MMN

I'm very new to DPS so I hope the following description makes some kind of sense.
My magazine is in the process of doing trial runs for an iPad edition. I'm setting some templates up for us to work off so the process from magazine to iPad will run a lot smoother month to month.
So far I've set up some dummy stock pages in an InDesign CS6 document, currently 15 pages long.
All images are linked and all fonts have paragraph styles applied to them.
I'm at the stage I want to check the document on my iPad to test run font sizes and their legibility.
We have successfully been able to export the document as a jpg file but we really need the PDF format. When attempting this we get the above message.
Sonia.

I cant register for eprint - error msg says: ajax submit failed: error = 403, forbidden

i cant register for eprint - error msg says: ajax submit failed: error = 403, forbidden
Suggestions?
Thanks -

I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

"click on the link for each error to highlight the location of the error in the PDF file" fails

Similar Messages

Maybe you are looking for