Click sound when opening/closing cover

I've had the ipad 2 and Apple cover for 2 months.  When I first got it, there was a click sound when opening or closing the cover.  There is no sound anymore when opening/closing.  Did I change a setting somehow which caused this?

On the new iPad, the switch next to the volume rocker has two functions, depending on how you have it set in 'Settings.'  There's a section in General called Use Side Switch to:.  You can either use it to Lock Rotation or Mute.  When it is set to Lock Rotation and the switch is pushed to the left, yes, the rotation is locked, but when it is set to Mute, and the switch is pushed to the left, all sounds are muted, including the sound for when closing the cover.

Similar Messages

  • MacBook Pro 13 - Clicking Sound When Opening

    I have a MBP 13 that runs perfectly. However recently I noticed a "clicking" sound when I open the display. The noise (a single click) appears to come from the upper right hand side of the screen. Any ideas on whether I should get this checked out?

    dcnjrich wrote:
    I sent my MBP13 to Apple for repair. The tech indicated that the hinges were lubricated and tightened....and the sound still exists. Atleast I have it documented in the event there is any type of failure. Candidly I'm guessing that one of the magnets is loose as the noise does not occur when the laptop lid is closed.
    If this was my MBP, I'd return it and ask them to fix it correctly, and if they can't, ask about a replacing it (I would miss it while it was gone, but I'd still be able to work on one of my other Macs. If you can't afford the time without it, your situation might be different; obviously that's your call.)

  • Light clicking sound when opening display ?

    HI everyone,
    My Macbook Air make a cliking sound when i open up the display, when I hit the fully extended position (this happen even if I open the laptop very slowly). I had the display changed TWICE because of this issue and it just came back on the third display. Does every other MacBook Air out there does this sound ? I went to the Apple Store and one of the two Air on expo did it.
    Thanks for imput !
    Chris

    My MBA is silent on opening, MtlChris, so not all.
    I think though that going through multiple repairs on the same laptop a frustrating process. I'd just persevere with Apple service until your issue resolved.

  • How can I remove annoying click sound when opening new tab?

    I've already goggled this and it said something about no-script (which I'm not running) and nothing else that sounded remotely close to my issue. Basically anytime I open a new tab (which I do tons of) I get the most obnoxious loud click type sound and it drives me up the walls. I can simply mute the whole browser but then many media players and the like play the audio directly through the browser instead of adobe flash or the like. I just learned it also plays the most annoying sound in the world when I use the spellcheck feature...
    Any help on removing this terrible sound file from Firefox would be greatly appreciated... I would hate to have to start using chrome just to get away from this sound.
    The only add-ons I use are Adblock Plus 2.6.3, Advanced SystemCare Surfing Protection 1.0 (I assume it installed itself with the actual ASC program), and Leechblock 0.6.6.
    All my plugins are off by default unless I manually turn them on the add-on manager window when I start up firefox and the sound plays before I ever activate them.

    Did this start when you installed Firefox 30, in other words, Firefox 29 and earlier was fine?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • How to make sounds when Opening/ Closing windows, folders.

    I liked this back when I was on OS 9 using R2D2 sounds, is there any freeware apps for this?
    Didn't see one on Version Tracker, Thks.

    Hi, MacUser88.
    AFAIK, your only choice is the shareware application Xounds. However, I'm not a fan of such hacks or "haxies" — I never use them and would advise you think seriously before using them. Quite, boring, and stable is often preferable to noisy, cool, and unstable.
    The only freeware offering in that arena was MooSB, but it does not appeared to have evolved since Mac OS X 10.2 Jaguar.
    You may also want to search MacUpdate for interface sounds or appearance sounds, the latter being what they were called back in Mac OS 9, if memory serves.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Why is there a clicking sound when I close the cover and enter sleep mode?

    why is there a clicking sound when I close the cover and enter sleep mode?

    Hi katesvca,
    I too have an iPad smart cover, and all that clicking sound is is basically the standard lock sound for iOS. The Smart cover is equipped with magnets inside, and the iPad is also equipped with magnets, and when those magnets are closed together the iPad goes to sleep.
    I hope this answers your question.

  • MacBook Pro 2012 hinge problem with single click sound when i open it

    when i go to sleep and shut my macbook off and close the screen next morning i open my screen and i hear a single click noise??
    im paranoid ita a brand new macbook its not a hard drive fail it just a single click sound when i open it to turn on
    and heres a video of the hinge is this is whats causing the single click sound? http://www.youtube.com/watch?v=wEUt2p783nA

    I have this problem too with my Mid-2012 MBP non-retina. The screen would click once, after being left for a long time, and would be fine after that, until you close it and re-open it again after a long time. It is especially loud in the morning so I think it is temperature dependent. Happened about 3 months after buying. I took it to Apple. First time they replaced the entire screen. They had to since that is the only way to replace the hinge. When I got it back, the screen still clicks. Took it back to Apple again. Second time they just tightened the screws securing the display with the unibody. When I got it back the second time, the screen still clicks. Took it back to Apple again. The third time they replaced the entire screen AGAIN! When I got it back, the problem was fixed for 2 days, then the screen started clicking again so I'm back to square one. I'm wondering whether I should take it to Apple the forth time, but then again, they've already replaced the screen twice which didn't work so I'm not sure what more they can do. It's either this is normal, which implies the screen hinge is really badly designed or the clicking has nothing to do with the screen at all.

  • Clicking sound when streaming audio in Safari

    hello,
    has anybody ever experienced a clicking sound when streaming audio over the internet? i have no idea where to begin to fix this problem.
    amber

    Dear Amber,
    I am experiencing the same problem on my iMac G5 when I am streaming movies from ANY browser AND when I watch trailers on Front Row.
    I think the QuickTime plugin has a problem streaming audio while the movie downloads, especially when the file is large (as in the case of Front Row streaming movies, where the files are all HD).
    If other applications are open concurrently, the problem is even more noticeable, because QuickTime 7 consumes a lot of resources and if you do not have enough RAM (and 512 MB does not seem to be enough with OS X 10.4.4) it will strive to perform.
    You may check how much memory is used by your computer by opening the Acivity Monitor utility.
    I hope Apple will become aware of the problem and suggest a workaround, because otherwise QT 7 is exceptional.
    Ciao,
    Alessandro
    iMac G5 (w/iSight)   Mac OS X (10.4.4)  

  • I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

    i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
    i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
    please help!.. i shall be really thankful.
    iPhone 5s, iOS 8

    I have the same issue and it has to do with iOS 8.2
    Apple, please mend this ASAP. Really stupid change since iOS 8.1
    If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

  • My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

    my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

    Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
    Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
    Is too much of the system memory tied up? If so, what can I do to free some up?

  • My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in.

    My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in. The ipod doesnt turn on when I plug it into the wall, even if I let it charge, and itunes won't recognize it. I have tried to reset it with the home and power buttons. Whats wrong and how can I fix it? I think it might be the memory or the battery. What could the clicking sound be related to? Thanks

    Try placing the iPod in recovery mode and then try restoring the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    After that I would make an appointment at the Genius Bar of an Apple store.

  • Should Keyboard have the "clicking" sound when typing?

    I noticed that the MacBook Pros, when typing on them, have the clicking sound when pressing each key. My wired keyboard also has a clicking sound when typing. However, the MBA I just received in the mail, does not. Only the space bar essentially does. Is this the same for all of them? Thanks.

    Yes, this is normal. The keys don't really click, the spacebar isn't really a click but it makes a slightly more click like sound the other keys on the MBA.
    The latest MBP keys are more like the MBA keys I believe.

  • Why system alarm sound when opening an app on my MBP 13"?

    Recently started to hear system alarm sound when opening an app., eg. Mail, Safari (usually from the Dock). No apparent operational problem, but quite annoying, especially since I don't know why. Happens on my 13" MBP, but not on my iMac, both running ML 10.7.4.
    Repair Disk Permissions and Verify Disk both OK.
    Any clues from anyone??

    Disable: Play user interface sound effects in System Preferences > Sound > Sound Effects
    If that doesn't make a diffeence, check your Dashboard widgets.

  • HT4528 Clicking sound when making a phone call

    Clicking sound when making phone call

    I had this happen as well. Restarting my MacBook Pro (8,2) made it go away. At other times it seemed to appear when calling some phones (my wife's iPhone 4 and my son's Samsung phone) but not others (my land line), but this was not consistent. My phone is an iPhone 5. I'm hoping the iOS update due tomorrow will fix this.

  • Garageband making loud double clicking sound when trying to record

    Garageband makes a loud double clicking sound when I'm trying to record and then it won't let me play back what I've recorded. Please help. Thank you

    Im having this problem too actually. I have to restart my MacBook Pro to make it go away...
    Latest version of GarageBand. 10.6.1. All updates done.

Maybe you are looking for

  • Remote XUL no longer available in Firefox to set interface speed to broadband by internet provider

    We had some problems with thunderbird lately and had to redo some settings. When resetting my email account on the server to 'Interface speed' from Simple (Dialup) to Advanced(Broadband) it comes up with the message: REMOTE XUL - this page uses an un

  • How to find the timestamp and SCN in the standby database?

    Hai, I have Oracle 9.2.0.4 RAC with 2 nodes in the production. The logs generated at these servers will be manully moved to my standby database and will be applied. To know what isthe maximum log files applied in the standby database, i am using the

  • Find start/end of word contained in text.

    I feel really silly asking this, but my brain doesn't seem to want to work at the moment and I can't find my old semester 1 examples. While I can easily solve this in C++ trying to do it in Java is a bit of a mystery. size_t = found, str.find() strin

  • Macbook Pro Problems with D-Link Router

    My router D-link (Dl-624+A, model available in Asia) 802.11g/2.4 Ghz wireless router serves a G5 iMac, a G4 Aluminum Powerbook plus a Windows laptop and desktop. We have never experienced any problems with the network. I have recently bought a 17" Ma

  • Uncorrelated GC STW pauses in ParNew + sys cpu time spikes from jvm calls

    Hi, JVM experts. GC is not an easy subject to grab all its subtleties, so I'm looking for some advice with my situation where to dig further. The overall picture: 1) Linux smp (2.6.5) x86_64 host with 8G memory, 2x2Ghz xeon (HT) CPUs Java HotSpot(TM)