Click To Activate and Use this control message in IE

I have this message popping up only on the IE "Click To Activate and Use this control message".
I googled it and there are a few solutions but somehow they did not really work for me.
Is really that complicated to get a fix on that message.
Does anyone have a good working solution?

Hi,
You may want to try any one of the following to know and get rid of the message you are talking about
http://www.kirupa.com/developer/flash8/flash_fix.htm
http://www.howtocreate.co.uk/noclicktoactivate.html
Thanks!
ps: please mark this post as Answered if this is of help to you

Similar Messages

Hoe do i avoid "click to activate and use this control" message?

how avoid th problem of getting the message below...when
there is a flash movie in my HTML file?
"click to activate and use this control"

Oh god .. here we go again .. Obviously someone has been
living under a rock
or on a deserted island for a few months :)
This is due to Microsoft IE changes required to avoid
infringing the
(stupid) EOLAS patent. It applies to all Active-X control
that can interact
with the user.
If you are viewing a web site, you cannot really do anything
to fix it,
except complain to the web master
Here is a link to find information on how to fix your website
to cope with
the Active-X active content changes:
http://www.justfuckinggoogleit.com?q=activecontent+IE+ActiveX+Change
Jeckyl
(If that does not redirect, just go to
http://activecontent.blogspot.com)

Click to activate and use this control

hi,
I have problem, when i run my .swf in browser i am getting
one message that " Click to activate and use this control"...is
there any solution to enable this message(alt tag)..

monuu wrote:
> i am really sorry...actually after i posted the message
i searched in this forums for the solution...after i saw them i
realised,...
>
> I am sorry
No need to be sorry. Will enroll you for two weeks as sex
slave and all will be
forgotten and forgiven.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Re: click to activate and use this control

activecontent.blogspot.com

Not a Flash issue. Only a Windows IE issue:
http://www.adobe.com/devnet/activecontent/
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"nolcon" <[email protected]> wrote in
message
news:e3ivu1$mq7$[email protected]..
Click to Activate and Use this Control... WOW... my
upgrade to
Studio 8 has been rendered anemic by the requirements of
"more security" by
Microsoft and others. Now Flash has an error message and you
have to click
the
little sucker to get it to work. Someone dropped the ball BIG
TIME on this
one. Surely there is a fix for this for a non-programmer such
as myself.
I
thought I was just stupid until I went on Taco Bell's
www.becomeelpresidente.com. I did the same thing there...
with different
browsers also.
HELP PLEASE!
Nolan Conley
[email protected]

HTML View - Click to activate and use this control

Hi, I have an HTML View in my VC App. When the HTML View is presented it has to be clicked on. There is also a tool tip that states "Click to activate and use this control". I didn't see any mention of this in the forums.
Is there any way to get rid of this?
Thanks,
Ken Murray

Hi Kenneth,
maybe you had this issue not before and then you have patched your windows system. This issue comes with a microsoft patch last year I think it was october or november.
Here on SDN is a how-to available which explains how you can remove this patch, but I think it's not recommend to remove security patches.
Best Regards,
Marcel

How to get rid of "click to activate and use this control"

Hi,
Any idea how to get rid of "click to activate and use this control".
I don't want user to click to start working with the form.
We are using IE6, forms9i and 10g application server.
Thanks in advance.
Kumar

I got the solution...
Metalink - Note:357545.1
Kumar

How to prevent people asking how to prevent "click to activate and use this control"

When I visit the fourms, I keep seeing these questions about
how to disable
"click to activate and use this control". Its really annoying
and
disrupting my web experience. I do know this really this is a
blatant
attack on Adobe and Flash by Microsoft and is obviously
related to the Adobe
takeover of Macromedia, and probably also related to the fact
that it is now
impossible for anyone to install Flash Player (which Adobe is
ignoring
because their support is so useless since the takeover). Is
there something
I can do to prevent these questions being posted? I've
searched all the
forums and cannot find any information. Surely someone else
has had this
problem.
Jeckyl

Some people don't like to search...
Some people don't know what to search...
Some people don't even know there is a search...
Just ask them to search for "click to activate and use this
control".
Search
Flash Support Forums
Search
Google

"Click to activate and use this control" in IE

When using Flash forms, IE 7 surrounds them with a box and
prompts users to "click ot activate and use this control." Is this
the old Flash problem with using object or embed tags without
javascript to embed movies? Is there a way to fix how ColdFusion
embeds Flash forms so people don't have to click on them before
they can use them? Maybe it's fixed in CF 8?
I found the answer here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=22&threadid=1141999&STA RTPAGE=2&FTVAR_FORUMVIEWTMP=Linear.
Not sure why this comes up in Google but I couldn't find it through
the Adobe site, this forum system really sucks i.e. slow searches
to the point of being useless.

What version of CF are you using? This was fixed with the CF
MX 7.02 patch

HTM says: "Click to activate and use this Control"?

When I open my published Captivate movie in Internet Explorer
(clicking on the htm file), my cursor becomes the shape of a hand,
and there is small a mouseover that says "Click to activate and use
this Control". I am using Flash 9. I must click 1x to activiate
something, then my Captivate buttons work just fine.
What is the control I'm activating? Can I turn off this
prompt in Security settings? This will drive end users bonkers.
I don't get this issue in Firefox.

Hi pcorad
This has been an issue since Microsoft was forced to alter
the way Internet Explorer handles content such as Flash. To work
past it, you can use JavaScript. (This is the reason for the
existence of the additional standard.js file we see in Captivate 2)
You might wish to search the forums for the phrase "click to
activate" and you should find many results that explain things in
more detail.
Cheers... Rick

Press SPACEBAR or ENTER to activate and usee this control

Hi,
Just started using Flash 8 and i seem to be getting a border
with the following message around any Flash content i use in the
site, message: 'Press SPACEBAR or ENTER to activate and use this
control'
I never had this with MX2004, any ideas anyone, pretty
annoying on an entire flash site.
Appreciate any help offered,
Pat

just search the forums - been the "hot topic" for a few weeks
- lengthy discussions been going on
everyday as we are all dealing with this (microsoft/Eolas
patent issue). Try searching google for
"active content" - tons of information in the form of
announcements, blogs, articles, etc...all over
the web.
As a developer there are various methods using js to activate
content automatically - if you are
just a web surfer you cant do anything.
hope this helps.
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
patbegg wrote:
> Hi,
> Just started using Flash 8 and i seem to be getting a
border with the
> following message around any Flash content i use in the
site, message: 'Press
> SPACEBAR or ENTER to activate and use this control'
>
> I never had this with MX2004, any ideas anyone, pretty
annoying on an entire
> flash site.
>
> Appreciate any help offered,
>
> Pat
>

Dreamweaver Site Publish_CLICK TO ACTIVATE AND USE THIS CONTROL ERROR WHEN PUBLISHING

Hi all, recently after publishing and testing my site I
noticed where my flash files are located boxes around the files
with a "CLICK TO ACTIVIATE AND USE THIS CONTROL" pop up thing
occur, when I hover over the flash parts. Can you please tell me
why this occurs and how to remove it? It works fine on safari but
using internet explorer, there seems to be a problem.
hope u can help

It's IE-only behaviour as a result of changes Microsoft made
earlier this
year to their browser, regarding how Active Content (Flash,
Quicktime etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2, the fix is already built
into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Regards
John Waller

Mozila Firefox is always asking me to click to activate and use plug-ins like Adobe Reader, Flash, Youtube videos and other plug-ins which it never did before.

I am using Mozilla Firefox and it is now bugging me. After updating it, it is now asking me to always click to activate and use plug-ins like Adobe Reader, Flash, Youtube videosand other plug-ins. I click on activiate all plug-ins but it still asks me to do it each time that I try to use Flash, Adobe Reader, watch a You Tube Video or anything. Why won't Mozilla Firefox automatically actaivate the plug-ins like it used to do. I tried to follow directions on our website for fixing this but it did not work. I am running
Windows XP. Please let me know how to fix this. Thank you.

In the past, to protect you from [https://support.mozilla.org/kb/use-plugins-play-audio-video-games plugins] that have stability or security issues, Firefox could only turn off the problematic plugin. Now Firefox can prevent the plugin from running automatically (which prevents many issues) and then let you choose to run or update the plugin. See [[Why do I have to click to activate plugins?]] for more info.
If you'd like to Disable Firefox's Click-to-Play feature,
# Type ''about:config'' in the address bar and press Enter.
# Press the big button to bypass the warning.
# In the search box, paste ''plugins.click_to_play''
# In the search results, double-click ''plugins.click_to_play'' to set its value to '''false'''

Allowed domains and not allowed to use this list messages

imsimta version
Sun Java(tm) System Messaging Server 6.3-3.01 (built Jul 12 2007; 32bit)
libimta.so 6.3-3.01 (built 20:10:10, Jul 12 2007; 32bit)
SunOS mars 5.10 Generic_125100-08 sun4u sparc SUNW,Sun-Fire-V240
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?
Hal Huntley

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

Press spacebar to use this control?

I've got a flash SWF inserted into a page, and when I view it
on the web,
the flash plays, but its surrounded by a border and a message
saying to
press spacebar or enter to use this control. Why is it doing
that, and how
do I get rid of that message?

please search forum - just scan down the ist of subjects -
been discussed for weeks - and lately
everyday and even several time perday and today several
threads on this within the past couple hours.
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
_adrian wrote:
> I've got a flash SWF inserted into a page, and when I
view it on the web,
> the flash plays, but its surrounded by a border and a
message saying to
> press spacebar or enter to use this control. Why is it
doing that, and how
> do I get rid of that message?
>
>

Include or create a view in the database and use this view?

Well, I need to get related data of the main table from another related tables, so one way to do that is to use the Include method in Entity Framework to get this related data.
However, I am thinking in another option, create a view in the database and use this view in entity framework. In this way, I avoid the needed of the include, because I think that is expensive in resources. But I am no very sure about that.
I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
For example, if I use the include I have the advantage that I get only one the main record and all the related data I have in the navigation properties, so the info is more shorted.
Which is the advanteges and disadvantages of both methods to get related data in entity framework?
Thank so much.

Hello ComptonAlvaro,
>>I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
If your view would use a Join syntax to query master-child relationship tables, it actually is similar with the Include() method which actually results a duplicate records from master table, you could check this
link for detail description.
>>Which is the advanteges and disadvantages of both methods to get related data in entity framework?
One visible difference is that records from Views are not editable by default(if you want edit them, you could refer to this
blog).
In your case, my suggestion that you could use the lazying load which will load the matter table once and disable the trace if you only need to display data.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Click To Activate and Use this control message in IE

Similar Messages

Maybe you are looking for