"Click To Change All Properties" Not Working In Dreamweaver CC For Padding/Margins

Every time I try to use the "Click To Change All Properties" option in Dreamweaver CC (the chain link icon in the middle of the Magin/Padding box), it never seems to work. Nor does it use the CSS shorthand, it lists the top, bottom, left and right margins/padding separately no matter if I have the chain link icon connected or broken. If I have it set to link all four sides, then enter a value into the top, nothing happens to the other sides. It's not until I enter a value in to the bottom that it auto fills in the other two sides. Anyone else having this issue?

Thank you for your help. I think I figured out what I might have been doing wrong when setting the margins. I would first clickt the chain icon to join everything, then enter in a value in the Top box, but I wouldn't see the other boxes update with that same value, so I would immediately click the Bottom value box. Instead, if I just click on the inner white box, just outside of the perimeter of the chain icon, it updates all of the remaining values.
The shorthand setting worked as well for the Padding/Margins. Thank you!

Similar Messages

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

TS5180 voiceover all is not working

voiceover all is not working, after press at the home button three quicks press the voice over all is not working, the /CANCEL/START AGAIN/EMERGENCY CALL
even try to press five susequent time still no response

Did you enable VoiceOver to be turned on using 3 clicks on the Home Button?
Settings > General > Accessibility - Triple click Home button for...

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working

When I upload photos from my phone to computer Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working. Even when I press preview on photo and they open in windows photo viewer I cannot save the file to my computer. I have Photoshop CS4

infact both are same only..http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter "http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter"

My iPad is stuck in guided access and triple clicking the home button is not working.... Suggestions?

My iPad is stuck in the guided access accessibility feature and the triple click home to exit is not working. I can not do anything on my iPad! Any suggestions?

Try resetting the iPad - press and hold the Poewr and Home buttons until the screen goes blank, then release them. The iPad should reboot. Go straight into the Settings app and turn off Guided Access.
~Lyssa

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make.

Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!

Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!

Get a new SIM from your carrier.

I am using iphone 4s and just updated ios6 but my apple map is not working please help me for the same

Dear all,
as i am using i phone 4s in INDIA, today itself i updated my phone to operating system ios6, but my map of phone is not working , so please help for same.Its says "direction could not be found ", when i select the starting point and end point, go to start.
With Regards
Anurag

Friend,
refer to following discussion on the same
Apple maps very disappointing

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks

MySite – My Content Page is not working and giving error for existing customers

We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
New users (after migration) are able access the My Content and adding documents but old users can’t.
Can anyone help me on the above?

I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
to check if your exisiting users are claims or classic users , try
get-spuser -web http://mysite.ss.com -limit all
check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps,
Thanks, Noddy

TS1297 My numbers / symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can only type these keys with the keyboard viewer. Any suggestions?

My numbers & symbols 1-9 / !-( do not work on my wireless key pad. I have tried the resolution information but, still no response with those keys only. I can type these keys with the keyboard viewer, thankfully. Any suggestions?

Unable to type while Mouse Keys is enabled in OS X

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

"Click To Change All Properties" Not Working In Dreamweaver CC For Padding/Margins

Similar Messages

Maybe you are looking for