Click to continue and auto-forward functionality

I want to have slides in my captivate movie that have a
clickbox where if the user does not click to continue after a
certain period of time the movie continues to the next slide. Any
thoughtson how to do that?

Question is duplicated. Original thread is
here

Similar Messages

The Versions and Auto Save functions do they work with Office 2011?

I recently installed LION on my Apple Pro. However the VERSIONS and AUTO SAVE functions do not seem to work with OFFICE 2011 Word and Excel. Does anyone know why?
Gabriel

Waiting for Microsoft to update them

"Auto stop" and "Auto Run" function exist?

"Auto stop" and "Auto Run" function exist?

many thanks...
full of ????
cracking this project issue...
Attachments:
AMK_solar monitoring system.vi ‏1451 KB
datalogger.vi ‏26 KB
Start.vi ‏22 KB

FlexConnect (aka H-REAP) and Auto-Anchor functionality

Hi Board,
I never did H-REAP on my wireless deployments. Now, I have an H-REAP (FlexConnect) requirement for branch offices.
Also there is the requirement for guest access at the same time.
From my understanding those features (FlexConnect and Auto-Anchor) should work together.
Please refer to the following exibit:
There is a FlexConnect AP at my branch office. The traffic from internal users (SSID "Internal") should be switches locally at the LAP (Lightweight Access Point). At the same time the guest SSID (SSID "Guest") should be tunneled back via CAPWAP to the controller to which the LAP is associated ("Central Controller"). The guest traffic should not emerge (switched) at the "Central Controller", instead it should be tunneled to an anchor controller in a DMZ via an "Ethernet Over IP tunnel" (Auto-Anchor functionality).
First question: Does this work (FlexConnect in conjunction with Auto-Anchor functionality)?
If this works, where's the web portal for guest authentication hosted (if using the internal web auth on WLC)? On the "central controller" or the Anchor controller? (I guess at the Anchor Controller in the DMZ, right?)
Is it possible to leave the guest SSID "open" with no webauth and still using the Anchor Controller? This would be needed if I have an external web authentication service, which would be hosted by a provider.
Thanks in advance for all your replies!
Johannes

The Flex 7500 deployment guide ("
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
") states:
"The Cisco FlexConnect Solution also supports Central Client Data Traffic, but it should be limited to Guest data traffic only."
later in the document there is a section about Guest access that states "Flex 7500 will allow and continue to support creation of EoIP tunnel to your guest anchor controller in DMZ."
Hope that helps.

Z10 has no auto forwarding function for emails

Unable to do a setting to auto forward emails to other or own email addresses.
Solved!
Go to Solution.

Well, I cannot seem to replicate it...I forwarded, using my Z10, a 37K email to one of my accounts and also cc'd it to two other of my accounts. All received it just fine...no truncation or any problems at all.
So, all I can think is that there's some problem with the services you are using. Maybe your SMTP outbound server is truncating. Maybe the email item is much larger. Maybe the receiving email systems are truncating.
You'd have to do several different controlled tests to try different things to see if you can figure out the pattern to it. I find no public KB articles from BlackBerry with anything about this symptom.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

About notification and auto forward

Hi all,
i'm new on nw-bpm
1. (send a message to let the requester know if the task has finished successfully in the end)
Could BPM use u201CNotification" tab in UWL?
if yes, which element should i choose in process composer of NWDS?
or i have to do some coding to send one "Notification"?
2. Could i set auto forward to make my SMTP mailbox receive the Notification at the same time?
Thanks and Best regards,
Fisher

Hi Fisher,
1. BPM doesn't support UWL Notifications so far. What you could do is implementing a Web Service which creates UWL Notifications via UWL API ([Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802bfda2-8a85-2b10-9290-d67da32d0c01?quicklink=index&overridelayout=true]).
2. You could use static notifications to send eMails to potential owners of a task [Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd5f0c-74ab-2c10-f79e-98d7869db972?quicklink=index&overridelayout=true]
Best Regards
Andreas

I do a search. I click on one of the results. Upromise open up with a "Continue" or "Log In". I click on "Continue" and it goes to the Upromise logon page. It used to take me to the site I selected.

It's been doing this for the last month or so. I just discovered that I don't have to hit the "Continue" button. After a couple of seconds it pops over to a weird Upromise log on page. It's the below info and it's all in the upper left corner of the page.
Sign in
Username:
Password:
I forgot my username
I forgot my password
I forgot my username and password

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

IPhone 6, Continuity, and Message Forwarding

I am trying to set up message forwarding from my iPhone 6 Plus ( OS 8.1 ) to my 2012 15" Macbook ( OS X 10.10 ). When I enter Settings>Messages>Text Message Forwarding, I only see my Mac Mini, despite my Macbook being logged into the same iCloud account and WiFi network as my iPhone.
Anyone able to help me out here ?
Thanks!

Thanks. Unfortunately that did not work, but now I notice that when trying to Bluetooth pair my iPhone to my macbook that it only connects for a few seconds and then reverts to "not connected". I assume this might be relevant to my issue... .

A script appears but with multiple continues and stop does neither : ///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:2309

///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:2309 clicking the continue and stop options results in the warning continuing. I am unable to close Firefox and cannot delete the program and reinstall. I am using IE to reach this site. Is there another way to uninstall Firefox and reinstall or to get the script to function. Thank you for your help. TG

This is typically caused by a problem with the Personas Plus 1.6 add-on and it conflicting with the Google toolbar.
Try disabling the Personas Plus add-on. To do this open the add-ons manager by selecting the Tools menu, then Add-ons. In the list of installed extensions click on Personas Plus, then click on either disable or uninstall.
If you can not access the add-ons manager, follow the instructions in the [[safe mode]] article to start Firefox in safe mode. You should then be able to disable or uninstall Personas Plus. You can find more information on this procedure in the [[Troubleshooting extensions and themes]] article.

Versions and Auto-save

I am a very new user to macbook. I purchased this for academic study and the "versions" and "auto save" functions sound just what I want. But I have no clue about how to "turn this on" and see the old saved versions of my documents. Any advice or help would be great

Plenty of discussions about this - see under "More like this" on the right.
Basically it's always on (you can't turn it off) *BUT* you have to have applications that specifically support this (i.e. TextEdit, Pages & Numbers).
MS Office 2011 doesn;t yet support it (MS says it will later), 2008 probably never will
regards,
Shawn

Can't get more credit. Click on $25 then click continue and no response at all.

I'm so frustrated!!!!! I'm in a foreign country and need more credit. I've tried everything. Went to add $25 dollars, clicked continue and nothing. Then tried to get a subscription, again nothing. I have 33 minutes left. Can't do online chat because it tells me its unavailable. Need help soon!!!!!!!!!!!!!

If you can enable auto-recharge on your account, your subscription will top itself off by $10 increments when your balance reaches $2. If the country you are visiting has restrictive Internet or a country restriction then you may not be able to access all of Skype's services. I suggest you try to make a purchase through a Proxy/VPN to see if you can top of your minutes. You could try hotspot shield if it's not blocked. You would probably have to restart Skype when you toggle the VPN on/off. So you could try signing onto Skype.com with the VPN on, make a purchase and then turn it off. The free version has ads and is slow: (make sure you perform a custom install and uncheck things as it usually comes loaded with some unwanted software)http://www.hotspotshield.com/

App to auto move the cursor to "Continue" and "Accept" buttons?

I don't know what to search for in the archives, but wondering if anyone knows of an app that will automatically move the cursor to the "Continue" and "Accept" buttons when installing or having to enter passwords. Though I'm not a big Windows fan, I do appreciate the option to have the cursor automatically moved to the default option when the user is asked to acknowledge something with a mouse click... particularly on a portable computer. I'm looking for something that reduces scrolling around to the box and places the cursor right there. Some might see this as lazy, so feel free to joke away Perhaps this feature is built-in to OSX and I just don't know how to access it... honestly I can't imagine why it isn't an option, but maybe there's a good reason. Thanks for any suggestions.

macjack, yes for the occasions when the default item is in blue then I just use enter. Often, the selections like "Continue" are not in blue however. Also, I'm still hopeful there's an app that will let me keep my hand on the mouse... mostly helpful with my macbookpro. Again, certainly feels a bit lazy when I describe it. But, seems like a feature that would be nice... have the cursor/arrow auto-point to the default or most commonly used option so you just "click" to keep going.

Im trying to update my apps and it wont let me. When i clicked on an app to update it or to download a free app it says "sign in required, tap continue and sign in to view your billing information" when i did it says "you must verify your payment info be

Im trying to update my apps and it wont let me. When i clicked on an app to update it or to download a free app it says "sign in required, tap continue and sign in to view your billing information" when i did it says "you must verify your payment info before you can makes purchases" then "security code is invalid" when the security code is valid. I even switched credit card it keeps saying the same thing....... THIS IS NOT FAIR........ I WANNA UPDATE MY APPS!!!!! Btw idk why did i buy the ipad for, APPLE dont even let you download ADOBE FLASH PLAYER and must of the games required ADOBE FLASH PLAYER to play example: wizard101. Idk what i was thinking...... :(

Why not simply remove yoru payment info by selecting None at top?
APPLE dont even let you download ADOBE FLASH PLAYER
Considering Adobe dont (sic) even make Flash Player for iPads, this seems about right. How can you download something that does not exist?

I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

When i log on to itunes it will tell me to review my account and when i do i click continue and it says my session has timed put and i have only been on for 2 seconds

when i log on to itunes it will tell me to review my account and when i do i click continue and it says my session has timed put and i have only been on for 2 seconds

Place the Device into Recovery mode... See Here...
http://support.apple.com/kb/HT1808

Click to continue and auto-forward functionality

Similar Messages

Maybe you are looking for