Click type and Click scenario

When recording a typical click, type in the field and then click search scenario, Captivate doesn't recognize that the text has been entered into the field and advance you to the next action unless you press tab or enter. Neither of which are required steps in the actual flow.
I want the training simulation to 1) have the user click the field and enter specified text then 2) click Search.
Captivate allows the text to be entered, but then does nothing unless pressing enter or tab, preventing the user from simulating the "REAL" steps.
Does anyone know how to achieve this?
Thanks.

Hello and welcome to the forum,
You could make the Submit button, which is also a way to submit the entry in the Text Entry Box, invisible by deleting the text and turn it into a Transparent button. Then put it on top of 'Search', so when the user clicks on Search he will submit his entry.
Lilybiri

Similar Messages

When i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

My Help Viewer doesn't work properly-The selected topic is currently unavailable Make sure you're connected to the Internet. For help connecting, choose Apple menu System Preferences, click Network, and click "Assist me." If you're connected to the Inte

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Why when i go to open a document i have to right click it and click Open?

its weird i cant click on it. I have to right click and go to open.

Go here and follow the instructions for resetting Launch Services.
http://www.thexlab.com/faqs/resetlaunchservices.html
Carolyn

Black screen, audio plays and clicks register

Laptop: Toshiba Portege R705-P41
Latest graphics drivers
Also, I followed the instructions on http://forums.adobe.com/thread/891337 to attempt to disable hardware acceleration, but guess what: the flash applets on that page are also black. So, when I right click them and click "Settings", nothing shows up.
Youtube works fine though. It's the only website that does.

What browser are you using? If it's IE, can you try to disable hardware acceleration within the browser?
http://support.microsoft.com/kb/2528233
In addition please post back with a copy of your dxdiag report so we can take a look at your hardware config.
How do I troubleshoot and report problems with Flash Player Video?

Problem with the Output Type and Transaction ME9F

Hi,
      I have an Output Type (xyz) and Program (abc).
      If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
      Printout.
      If for ME9F i give the output type ( pqr) then am able to get the Spool and
      Printout.
      Problem is :---
      when am using O/P Type ( xyz ) for ME9F then am abel to process but am
      not able to get the spool and not even printout.
      I want to know where it can be wrong.
      It's a high priority object.
Kindly help me out.
Thanks,
Zia.

hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay

When I type in search words in the google box and then drop down to the search that matches what I want, and click on it, it does absolutely nothing. It used to complete the search, how do I get it to complete the search?

Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!

Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

How can I automatically connect to the server without having to type the password and click "connect"?

I have a Mac OS X 10.8 and a Time Capsule configurated as server with a name "Servidor" on my home. The discs are protected by Accounts, so, each person can access the server by typing own name and password. The problem is... Every time I start the computer, I see the window below:
So, every time I start I have to type my name and pass. And the box "Remember this password on my keychain" doesn't work because the "Password" is always blank when I see the window, like the image up.
Please, someone help me to automatize it so I don't need to type nothing to connect to the server. I want something that do it automatically for me.
NOTE: Please, explain clear and with details because I'm a new Mac's user.
Thank so +!

Try running KeyChain First Aid if you have not already done so.
Open Keychain Access and click on the KeyChain Access menu at upper left of the screen
Click KeyChain First Aid, then close KeyChain Access
Open System Preferences (gear icon on the dock)
Open Network
Click on AirPort or WiFi on the left
Click Advanced at the lower right
Click to highlight an old network that you no longer need, then click the - (minus) button to delete the listing
Do the same for other neworks that you no longer need
Make sure there is a check mark in the box that reads "Remember networks this computer has joined"
No other boxes should be checked.
Click OK, then click Apply
That is about all that you can do.

HT5409 I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get.

I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get. anybody?

I also had issues opening AVCHD files on case-sensitive filesystems.
You can try these steps to solve the issue:
Right click on the AVCHD file and select 'Show Package Contents'
Right click on the BDMV file and select 'Show Package Contents'
Rename index.bdm to INDEX.BDM (it seems that all files in the BDMV folder should be in UPPERCASE for Quicktime to open the AVCHD file).
Go back twice and try again to double-click on the AVCHD file (Quicktime should open a window showing the multiple clips, as expected).

When I am trying to create an organization in HRMS, and clicking on Type field, it is showing me "Frm-41830: List of values contains no entries". Please suggest me what is the solution

When I am trying to create an organization in HRMS, and clicking on Type field, it is showing me "Frm-41830: List of values contains no entries". Please suggest me what is the solution

Hi,
Type is one part of Org creation....
Optionally, select an organization type in the Type field.
Organization types do not classify your organization, you use them for reporting purposes only. The type may identify the function an organization performs, such as Administration or Service, or the level of each organization in your enterprise, such as Division, Department or Cost Center. You create the organization types you require by entering values for the Lookup Type ORG_TYPE.
Regards:
Shahzad M. Saleem (mark this answer as helpful if it helps u)

Does Adobe Story Free have a Type and template for stageplay format and if so where do I click for it. In the Type button I could only find screenplay, TV script, Two column script, AV script and other, but not for stageplay?

Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

Ussually wen i purchace an app it just ask's me for my apple id password then install's the app, now it say;s (please sign in required) then after clicking continue it goes to "payment method/payment type and all my bank details now... sugesting there's s

ussually wen i purchace an app it just ask's me for my apple id password then install's the app, now it say;s (please sign in required) then after clicking continue it goes to "payment method/payment type and all my bank details now... sugesting there's something wrong with the detail's in there, this step was never required before now and im unable to install app's now... can someone help me with this issue at all please?????
iPhone 5, iOS 7.0.6

No one here can help you. Contact iTunes support & see what the deal is:
http://www.apple.com/support/itunes/

Click type and Click scenario

Similar Messages

Maybe you are looking for