Click wheel and center button

for the last few weeks my click wheel will periodically not respond. sometimes it works, and sometimes it wont work. the centerbutton is the same way. the lower portion of the click wheel is slightly indented, i thought initally that it was a heat problem. here in savannah GA it gets really hot and i thought that it wouldnt recognize the heat difference or something. i am really hoping someone helps me out.

Well I have THREE 1st gen iPod nanos that ignore the click wheel. I am beginning to speculate that there is a quality issue with these because when I gently flex the PCB near the click wheel connector then the click wheel will function. I am wondering if anyone successfully fixed this. You need a TINY soldering iron and a microscope to see the tiny components. I conjecture that there is a lousy solder joint on one of the tiny components causing an intermittent connection. If I get super lucky, I will then post my results!!!!
Message was edited by: choyak

Similar Messages

  • Still having click wheel and center button difficulties...

    My first topic-http://discussions.apple.com/thread.jspa?threadID=2115001&tstart=0
    So now, basically I can use the center button to turn the iPod on, and that's it. After that, nothing works.
    HOWEVER!, when I have my iPod docked in my speaker, everything works fine. Then I thought, oh, well it would probably work if it was plugged into the computer, right? Wrong. It only works right now when i have it in my speaker. So, I'm thoroughly confused ?_?
    Thanks

    Try to restore it using iTunes.

  • Non-functioning wheel and center button

    i'm stuck on the main screen, but it seems to work fine since it displays the cover albums normally
    i've tried the following:
    [ ] restored
    [ ] updated to current iTunes
    [ ] fully charged
    [ ] toggled btwn lock/unlock then held down the menu and center button
    [ ] plugged into other usb
    is this problem because while i use a mac at home to restore/add songs/etc, i charge it at work on a pc?

    i would love to know how to fix this as well. its happened twice to mine now, and i fixed it the first time by resetting the iPod, but it isn't working this time

  • Click Wheel and Center sensitivity?

    Been messing around with my newly purchased G4 Nano, and I've noticed something that's mildly annoying. I'm not sure if its just because I've become spoiled by the sensitivity of my main iPod touch, but the wheel on this model seems far less responsive than other click-wheel models I've owned in the past. Even the center button doesn't seem to register on occasion when I press it. And I know its pressed, because one can hear the little click of the button itself. (Not the Nano's speakers, mind you. Just the button!)
    Anyone else having this problem? I'll start running my finger around the wheel, and it won't even notice I'm doing it...til I lift my finger off and then start running it over again and then it kicks in.
    I'm tempted to bring it in and exchange it for another one, but I'm really not sure if I just need to retrain myself to use a click wheel model again...sigh.

    I will say this...I turned the speaker-sound on to check the clicking thing...and when my Nano doesn't react to a center button press...it does NOT make the speaker-click sound. So the button press for me at least does not register on the Nano at all. I'm starting to think I just got a nano with a less sensitive center button...I might just exchange it for another one, or maybe upgrade to 16 GB. The joys of having a brick-and-mortar Apple Store within 10 miles...
    And what with my Touch becoming much more a full-on PDA rather than just an iPod these days, I drain the battery on it faster than I thought possible with all the various apps, eBooks and web browsing I do more often now...
    So I really WILL be carrying two iPods around with me. Even with the little nano annoyances. Guh. Glad its so bloody tiny...my pockets can't hold much more gear...

  • My click wheel and select button are unresponsive

    hi
    I've had my iPod mini for just over a year now and I've had one or two problems in the past. However, I've been able to reset it by holding the select button and menu button. However, today my iPod's click wheel will not respond (and doesn't make it's usual noise) and my select button is unresponsive so I can't reset. Plus my almost full battery has just drained in less than 20 minutes. Are there any tips for restoring my iPod?
    Thanks

    Welcome to Apple Discussions!
    Try connecting it to the AC adapter after the battery is drained and resetting it. Also, is it turning on?
    Finally, does it connect to your computer? Try resetting it while it is connected to the computer.
    Read these tips on resetting...
    http://docs.info.apple.com/article.html?artnum=61705
    btabz

  • My Ipod recently wheel and center button stopped working. Help?

    I was putting music on my ipod, I ejected it then when i went to unlock it it unlcoked but the center button and wheel will not work. Yes, I have restored again and agian. i have also let it completely die. I know the button is not broken because it will go to home im i hom edown the ceter button and the menu. Helpp pleaseeeeeeee !?

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you can't restore the iPod...
    Apple - Support - iPod - Service FAQ

  • Click wheel and button malfunction!!

    The play/pause button on my click wheel seems to be unleveled compared to the rest of the wheel. When I look at it lengthwise, the play/pause area is lower than the rest. I noticed today that I had trouble turning off my nano because of the button.
    Also the center button moves around and so it seems that there is wiggle space. Does anyone else have these problems?

    Sorry I must apologize about my last post, I realized the issue with the centre button and it may not be a design flaw. I looked at another iPod, an iPod mini, and saw that the same issue existed. Then realized that if there was no give then the two components, the click wheel and center button would constantly be rubbing against each other and this would cause bigger problems.

  • Click wheel and buttons on ipod dont respond

    After not using my Ipod for a few months i recently got it out and put new music on it only to find out that click/wheel and buttons dont respond. The button lock works but that is all. The ipod sits at the language select screen until the screen fades.

    Yeah i have the exact same problem! i dont know what to do! My closest apple shop is birmingham and from what the other guy said it made no sense. if you have it sorted please let me know on what to do.
    thanks george

  • I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    You won't believe this but a friend of mine (who happens to be an Apple Genius) told me to put a towel or cloth on a sturdy countertop (I know this may sound weird) but hold the selct button (in the center) and menu part of the wheel at the same time until an Apple logo comes up on the screen and then quickly turn the ipod on it's side and wack it on the counter where the towel is so as not to damage anything cosmetically. It seems the clicking is the hard drive reader is stuck and this dislodges it. Mine works now (no clicking) and all seems to be well again. Who knew?

  • My classic is stuck on a blank screen and it won't connect to any device or reset when I hold the menu and center buttons. Any ideas what's up and how to fix it?

    I know click hold on and off then hold the menu and center button until the apple logo appears. I have tried this so many times and my iPod Classic is still unresponsive! I've tried plugging my iPod into my Mac, my wall charger, my ihome, everything, but nothing works. It won't connect to iTunes to restore or anything. I've tried leaving it unplugged long enough to let the battery die and then tried plugging it in, a method I've utilized successfully with other iPods but that didn't work either. I really just starting to lose faith in the quality of this product. The first classic I bought didn't work at all and I had to exchange it. This one I bought to replace my 5 year old nano and it hasn't even lasted 7 months! Somebody please offer me a solution and assure me that I didn't waste $250 on a crap piece of technology. I'm desperate!

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • Wheel and select button unresponsive

    My wheel and select button are completely unresponsive other than to reset. I've reset it like 10 times, and restored factory settings 2 times. I have the most up to date firmware and itunes.
    I can't let the battery drain because it is shutting off automatically now since I can't punch in the settings.

    I have the same problem - see below.
    Immediately after upgrading to iTunes 7.1.1.5. and updating, charging, and syncing, my iPod does not function properly.
    Symptoms:
    _The click wheel does not seem to work any more. The hold switch is set correctly to the left position.
    _No response to a reset by holding menu / select buttons for 10 secs.
    _When iPod is plugged into my CPU it seems to act normally - the screen lights up briefly and displays the message "do not connect" as iTunes starts and syncs all checked songs like normal.
    _After the sync the iPod display a full battery icon.
    _When the iPod is unplugged from the CPU the iPod display is lit briefly, displays the menu where the user selects which language to use. There is a small icon that looks like a lock at the top of the screen. After about 15 secs the screen goes blank despite trying to scroll and make selections with the click wheel.
    _The iPod does not respond to the click wheel when in Itunes (which may be normal) or when disconnected (even after switching the hold switch back and forth several times).
    _The iPod shows up in iTunes and in My Computer.
    _Songs on iPod open in Windows Media Player and play OK when selected directly from My Computer.
    I tried restoring (1.3.1.) a dozen times and upgrading the iPod several times from Itunes and also restoring ITunes 5 but no luck.
    This iPod (2g) is 15 mos. old and worked perfectly just prior to the upgrade to 7.1.1.5..
    Any help would be appreciated!
    sbyberg
    Serial Number: 6U5483TWSZB

  • In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    The application auto-saves your input when you close the document.  If you left the document, as you state, the notes/comments should have been saved and should have been visible the next time you opened the document with the Mobile Reader (note that if you are opening the document with another app such as Apple's built in PDF Viewer, things like notes/comments may not be visible).  Also note that if you are doing an Open In... from another app (like Dropbox), the version of the document in Dropbox does not update; only the version of the document in the Mobile Reader is updated.
    Would it be possible to send a video of the problem you are encountering to [email protected] so that we can try to help?

  • Sharepoint 2003 Cannot save change by IE when click Save and Close button to save change on survey item

    I am using Windows 7 SP1(cannot confirm the IE version, suppose IE8).When I tried to edit a survey item, click Save and Close button. Data cannot be saved.No problem with my account or permission since I can change it on another computer.Below action cannot
    fix the problem:clean IE catch, reset IE, reinstall IE, rebuild windows profile.
    error can be seen at the IE status bar
    Erros on this webpage might cause it to work incorrectly
    'length' is null or not an object
    custom_ows.js
    'undefined' is null or not an object
    custom_ows.js
    Code:0
    URI: http://server/_layouts/1033/custom_ows.js

    Mainstream Support for SharePoint 2003 has already ended and it does not list IE8 as a supported browser:
    http://office.microsoft.com/en-us/technet/system-requirements-HA001160515.aspx?pid=CH011719821033
    You can always try to add the site to Compatibility Mode, but there is no guarantee that it will work in this scenario,
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-8
    Dimitri Ayrapetov (MCSE: SharePoint)

  • Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success.  have tried this many times and kept connected for several hours.

    I have a classic, several years old.
    It will not recharge; the Apple logo flashes every few seconds then disappears. 
    I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success. 
    I have tried this many times and kept the ipod connected for several hours.  And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

    Hi enbridge4,
    If your iPod Classic won't charge or turn on, you may find the following articles helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/ts1383
    Apple Support: iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    Regards,
    - Brenden

  • Click Wheel Unresponsive and Center Button Problem

    Hey all,
    I have 2 issues with my ipod nano 8GB (4th gen) that I'm thinking might be hardware, but I would like to ascertain if there's any quick/easy fixes possible.
    1. Sometimes I notice that half of my click wheel is unresponsive. I would be adjusting the volume and all of a sudden the volume would pause and then jump (since whatever software is controlling the clickwheel thinks I rapidly scrolled through that unresponsive portion). Note that this unresponsiveness occurs for any scrolling action (the volume is just an example).
    2. Recently, I noticed that if I hit the center button to play a song, it would sometimes immediately cycle to the next song or go back to the album if there was only one song.
    I'd like to avoid sending the ipod in for repairs, so any help would be appreciated!

    I have the same problem, only it's just my menu button.
    It was on-and-off working for a while, but it just stopped all-together today.
    No water damage, or serious drops, but I use it every day, and that might have possibly contributed to the issue.. Though you'd think they were built for frequent usage!
    I'm just going to call in to apple, there isn't much online about how to help.. and you need the menu button to reset it, so that won't work to even bring me back to the original menu screen.

Maybe you are looking for

  • Material not getting displayed in create asn screen

    Hi All, We are not able to see the material under create asn screen in SUS tho the same appears wen we open the PO in SUS.Also,please let me know which function module in sus governs the display of material in create asn screen Thanks, Manu

  • What's happening when I change tempo?

    I have some audio tracks that have been chopped into regions. The regions are butted up to one another. They are pieces from different tracks that have been put together. I noticed that if I change the tempo in the transport window, I end up either w

  • R12 Canadian Taxes on AP invoices

    Hello, Does anyone know why Oracle creates both recoverable and non-recoverable taxes on expense report invoices? We are setup for recoverable taxes but the system in creating a 0 line for non-recoverable taxes. Thanks.

  • URL does not come up in location bar

    When I open a new tab and click on a bookmark, the url loads in the location bar and then goes blank. The cursor stays in the location bar and I have to click on the new page before it moves. How do I get the website name to appear automatically in t

  • "this specified account already exists"

    Installing itunes for 1st time on new windows 8 computer. This message keeps preventing me from finishing download. Help would be appreicated.