Click wheel - blank screen?

I was charging it and everything was fine. About an hour later the unit is really hot (not ON or NEAR anything even remotely warm) and screen is blank. I can hear the hard drive and 30 minutes later I can still hear the drive, but now the heat has dropped so that it is cool to touch. Unfortunately, I cannot revive. Have tried to reset. Have swapped USB ports. It doesn't show up on My Computer. Have tried iPod updater and it can't find it.
Is it dead?
Dell Inspiron 600   Windows XP   iPod Click Wheel

The heat could be from the battery or the HD. In case it is the HD, which is likely caused by the head get stuck at a cetain point, and you will soon get the sad iPod icon on your iPod. See if the following helps
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Similar Messages

  • When I click on picture in Photo Gallery...just blank screen...no picture

    Hi. I have been doing well with iPhoto until I tried to migrate to Aperture. When I migrated to Aperture, I deleted the iPhoto library in Aperture as I read in the tutorial.
    Clearly, I did something wrong. Well, I uninstalled Aperture and will be using that at another time, but for now here is my dilemma.
    Since I migrated photos to Aperture, consolidated them with iPhoto and then deleted...
    now I open my iPhoto and double click on a photo to edit or view...and nothing appears. Just blank screen. The small pics are at the top but it doesn't open to a larger picture. Where are my photos! Help!
    Image: !http://www.facebook.com/photo.php?fbid=10150106481305832&set=a.101501064812108 32.307068.555810831!

    The previews you refer to are the thumbnails in the iPhoto Library - iPhoto creates them when you import a photo.
    Aperture has the ability to trash Referenced Files. If you imported the files to Aperture as Referenced and then trashed them from Aperture, are you sure you didn't also tell it to trash the Referenced Files. This would produce exactly the scenario that you describe.
    Regards
    TD

  • I downloaded Firefox to my PC and olny get a blank screen when I click on the Icon, Why?

    I only had Internet Explorer on this new( to me) PC and wanted to download FireFox. I downloaded it to my PC and when I click on the Firefox Icon, all I get is a blank screen with a small menu bar at the top left. I DO NOT get the icons that show on the sample input screen at the top right. All I get is the History icon which does nothing when I press it. I deleted the Firefox app from my PC and downloaded it a second time and it does the same thing. My son gave me this used PC, but it did NOT have firefox on it. What do I do now?

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • I can't download apps! Every time I try, it asks me to chose a security question and I try, but I just comes up with a blank screen and I can't choose a question. If I click no, I don't want to put security questions, it doesn't install the app. HELP!

    I can't do it! I am willing to add questions but I can't because it just shows me a blank screen. I even tried rebooting my entire iPad2 and that didn't work. I know it is not a certain app because I tried multiple ones.... HELP!

    found answer on another thread...passing along
    https://discussions.apple.com/thread/4052317?start=30&tstart=0
    Re: Forced Apple ID Security Questions - Choice of 3
    Sep 26, 2012 11:38 AM (in response to KirstyHenderson)
    Hi all! I have found the answer in another forum and this has 100% worked for me!!!
    1) Quit App Store in multi-tasking.
    •From the Home screen, click the Home button twice.
    •Tap and hold on the app.
    •When it starts to jiggle, tap the red  ⛔ in the top corner to close it;
    ***Please close all open apps on your phone***
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button
    See the answer in context
    I hope this helps a lot of people!! Spread the word (seeing as apple doesn't seem to want to/care!)
    Nads

  • I cant use facetime. but my sister can. we share the same account for itunes.but when i go to face itme and click on create a new account a blank screen pops up. what do i do?when i go to make a new facetime account nothing comes up

    i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account.  what do i do?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • When I click the View option to view a document on my insurance website, I only get a blank screen with words Mozilla Firefox, and below it, "Search Bookmarks and History" in the upper left corner of the screen.

    This also happened at a bookseller's website, when I clicked on the photo of a book to enlarge it. Instead of showing me an enlargement, it took me to the same blank screen with the title bar, "Mozilla Firefox", and below it another bar with the words "Search Bookmarks and History," both at the top left of the screen. This has happened repeatedly at the two websites I have mentioned. When I went to the same sites using Internet Explorer, the error didn't occur. I did a Microsoft system restore for a previous restore point, but it still did not eliminate this glitch.

    Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * New Old Menu: https://addons.mozilla.org/firefox/addon/new-old-menu/
    * Personal Menu (Personal Firefox Button): https://addons.mozilla.org/firefox/addon/personal-menu/

  • Ipod nana 3rd gen. menu is on screen, but click wheel is dead

    Hi there, got a i-Pod nano 5 years old, never problems. Connect i-Pod with Mac book, appears no icon in itunes.
    The menu screen is on, but the click wheel is completely dead. Still for 4 ours. Think menu screen will stop when battery is empty.
    Someone knows what to do?

    Make sure the Hold swtich is not ON.  Even if it is OFF, try moving it to ON and then OFF again.
    Try doing a Reset of the iPod
    http://support.apple.com/kb/HT1320
    A Reset "reboots" the iPod.  It is not erased.

  • Looking for a clear case that protects screen and click wheel

    Hi,
    I've got a new 8GB Nano. I'm looking for a case to protect it from general dings and scratches. What I'm looking for is a clear case with screen and click wheel protection. Anyone know where I can find one? So far, all I've been able to find are clear cases that protect the screen but leave the click wheel unprotected. Or is click wheel protection not that that big of a thing?
    Thanks!

    There don't seem to be many cases available yet for the new Nano. I ordered one from iSkins, a company in Canada. You can check their website.

  • My mail on iMac is not working properly. Click on email, it hangs, showing previous email. Takes forever to load. "No message selected" showing in a blank screen

    My mail is not working properly: when I click on an email it hangs, frequently showing the previous email, often for up to a minute. Or it shows "loading" and just sits there showing nothing. OR there is a blank screen saying "no message selected". It's slow to load, and I'm not happy. Recently switched from Windows PC, not impressed so far. Very frustrating.
    Any suggestions would be gratefully received. (I upgraded to Mountain LIon, and don't think I had problems before I did so, though I hadn't had the computer for long.)

    Hi Sarah,
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • HT1338 MacBook Pro 13.3: Desktop screen will not come up when turned on.  Screen is blank except for an icon of a folder with a question mark on it, in the middle of an otherwise blank screen, laptop making a clicking noise.

    My MacBook Pro 13.3 MAC OS  X v10.7 laptop will not come up.  Blank screen comes up, no color/desktop, etc., only an icon of a folder in the middle of the screen with a question mark on the folder.  Laptop making a clicking noise. Suggestions? Thanks!

    It's under warranty. Take it in to have Apple fix it.
    The "flashing ?" means the machine can't find the start up disk. The clicking noise is a give away that the drive is damaged.

  • HT1386 I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.

    I just got an iphone 4 and when I go to sync it, it appears in the left hand column but when I click on it there is just a blank screen with the apply logo and a tiny lock.

    OK, I think I fixed it.
    After trying to restore with an old backup from the phone (it estimated it would take 4 hours) I cancelled and went through the setup menus again, but set it up as a new phone. It then appeared in iTunes and I restored it from the computer, not the phone. It appears to be working, it's syncing my old apps right now.
    Summary:
    1. Reset settings on phone (hopefully you backed up fairly recently)
    2. Set up as NEW iPhone in setup menu on phone
    3. Restore from iTunes on computer when it recognizes the phone
    4. Cross fingers

  • When I click on "pics" on a particular website, I get a blank screen.

    On the chatroom site gay.com, a list of chatters pops up, when you go to a particular room. If you click on a chatter's picture, it's supposed to bring up his profile. But with the "new" Firefox 4... when you click on a picture, a blank screen pops up. I'd like to go back to my earlier version of Firefox, if possible. This new version seems impossibly complicated.

    I see that you ave changed some network.http prefs.<br />
    Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page.<br />
    network.http.max-connections 48<br />
    network.http.max-connections-per-server 16<br />
    network.http.max-persistent-connections-per-proxy 16<br />
    network.http.max-persistent-connections-per-server 8<br />
    network.http.pipelining true<br />
    network.http.pipelining.firstrequest true<br />
    network.http.pipelining.maxrequests 8<br />
    network.http.proxy.pipelining true<br />
    network.http.request.max-start-delay 0<br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • When I click on "Click Wheel Games' in the store it is blank. Why?

    I am trying to purchase some new games for my iPod Classic 80g, and when I click on the Click Wheel Games under the apps tab in the iTunes Store.. The page does not load, it is just a white screen.. Is this happening for everyone? Is there something I can do? Is it just down for a while? I need answers.

    I tried it, I get unknown error -50.  Everything else works fine, seems like that part is off line - try again later.

  • When I click on a picture or a link, to take a closer look, I get a blank screen and it says at the top search bookmarks and history, at the bottom it says 'stopped' - what is this problem and why is it happening

    when I click on a link to complete a form, or a link to take a closer look at a picture, I get a blank screen and it says at the top 'search bookmarks and history', at the bottom it says 'stopped' - what is this problem and why is it happening ?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • When I click on camera, I only get a blank screen. I used it earlier to take a picture.

    When I click on Camera, I only get a blank screen. I used it earlier to take a picture.  What is wrong?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

Maybe you are looking for

  • IMac connected to a 30" display

    Hi everyone, According to Apple the iMac will not support the 2560x1600 resolution of an external 30" monitor. But, according to the comments below the following article, the new iMac with the NVIDIA GeForce 8800 GS can be connected to a 30" monitor:

  • Maximize/minimize and close buttons do not work properly

    Suddenly the buttons at the top right are not working properly. There is no change in appearance when hovering the mouse over it. This does not occur immediately after I open firefox but shortly afterwards. I noticed by accident that if I open the op

  • How do you set the position of JScrollBars?

    Can anyone tell me how to set the positions of the JScrollBars in a JScrollPane so that it will show the area I want? please, Tommy

  • Balance carry forward at end of page in adobe forms

    Hello all, I am new to adobe forms. I have a table with data with amount column. when the content of the table flows to next page i need to get balance carry forward and page to total and same at next page top as below I got to know we need to write

  • Approach of using Bulk Collect

    Hi Experts, how to use bulk collect for uncertain number of columns of select statement. Master table structure: Create table tabmst (id number, cls_input varchar2(2000), price number); insert into tabmst(1,'select product, price from product',500);