Click wheel does not appear to be working

My click wheel does not appear to be working. I can however, press "menu" & the center button at the same time to reset it. Any suggestions on how to get it working again?

Have you tried doing a RESTORE on the iPod when plugged in and showing up in iTunes?
Patrick

Similar Messages

Ipod click wheel does not work at all..

I gave a friend of mine my 4g photo. It worked for him for a few days and then stopped. He brought it back to me and I restored it twice back to factory settings. Still nothing. The other weird thing is when you cycle between hold and on, it starts the ipod like it is an on and off switch. The click wheel does not respond, and the hold thing is just weird. I just would like to know if this is a hardware problem, and if there is anything I can do to get it up and running again.. thanks...
Macbook Pro 15" Mac OS X (10.4.8)

hi muddy angel, recently i had a problem that sounds similar. my well cared and little used 40gb ipod didnt respond to the clickwheel -no reason that could be recognised. gravis in berlin, germans probably biggest apple dealer, checked the item. they told me it would be a rare, but well known very unlucky thing that clickwheels sometimes just give up their functions for unknown reasons. unfortunately my clickwheel did so, after the warrenty has run out a couple of weeks ago and as well annoying is the fact that a replacement of the clickwheel is horrible expensive. so, if you have the opportunity to have your ipod checked by a hardware pro - try it.

My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but looks ok. Help?

My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but it is all set up as it should be. Is there anything I've missed or could try? Thanks

Try the following:
In Finder, select the problematic volume and then press command-I.
Expand the Sharing & permissions section if it's collapsed.
If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
Tick/check Ignore ownership on this volume.

HT4053 How do I delete photos, the delete button does not appear to be working?

I have downloaded all my photos to my new IPad. I need to delete some I do not want, how do I do it. The delete button does not appear to be working?

I personally don't know of any other software that does syncing, however, you can use another cloud service like Dropbox or Flikr to house your photos, add and delete them and have them available for viewing on any device or comuter that has an internet connection.
I'm not sure why you would be having trouble not getting photos that you put into your Photo Stream Uploads folder on your iPad. Photo Stream is Photo Stream. Also, just so you know, photo management and Photo Stream have nothing to do with iTunes. Photo management on the computer is done through your photos folder and app (on a Mac, it's iPhoto). You only use iTunes to tell the sync process which items to retrieve and sync from that library. Photo Stream is completely independent of iTunes altogether.
If you want to get photos from a camera to your iPad without having to use a computer, get a camera connection kit which will allow you to physically hook the camera to the iPad, and to directly download the photos from the camera to the iPad.
You would still want to also hook the camera up to the computer to back those photos up to your photo library on your computer.
Also you might want to look into purchasing (for under $5) iPhoto for your iPad:
https://itunes.apple.com/us/app/iphoto/id497786065?mt=8
Seems like you might benefit from talking to your local Apple Store about when they might have some sessions for learning photo management and sharing between your device and computer, because what you appear to be wanting to do is all do-able. I guess I'm just missing what your issue is. You can many things with photos on your iPad, however, your device will never be a substitue for your computer for backing up and managing your photos.
So, best of luck, I hope one of the suggestions above will help you to achieve what you are trying to do.
Cheers,
GB

I have loaded new software and iMessages does not appear to be working. All messages appear as in delivered but they will send to the same address on my iPhone.

I messages does not appear to be working on iPad every time I type a message it comes up as in delivered but I can type the same message on my iPhone and it works straight away

MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly. I would think that someone would be intelligent enough to do that before buying a new device, but......
iMessage could be an activation issue or a network issue.
Have you tried Settings > General > Reset > Reset Network Settings?
Does iMessage work consistently on Wi-Fi?

Video will not play on BBC site error message this content does not appear to be working .Help

I have bbc news as home page after i updated to firefox 10 if i try to play embedded video i get the eror message [this content does not appear to be working] Help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

Try the following:
In Finder, select the problematic volume and then press command-I.
Expand the Sharing & permissions section if it's collapsed.
If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
Tick/check Ignore ownership on this volume.

Autofill in Google Toolbar does not appear to be working with Firefox 4 - Aways saying Autofill not available for this page even on pages I have used it before FF4 upgrade

Autofill in Google Toolbar does not appear to be working with Firefox 4 - It aways gives the message "Autofill not available for this page". This is happening on pages I have used Autofill on before upgrading to FF4 from Firefox 3.5.x

i did not see a solution posted - I tired what I read. Going back to an old version may solve the problem but it is a stupid solution so I have yet to do that.
I am on version 4 and autofil this does not work :
Popular answer Go to this answer
Uninstall version 5, then Google "google toolbar version 4", follow the link to FileHippo.com, and download and install the last version 4. When you reinstall it, make sure you turn off the option to perform automatic updates.
6 of 7 people found this answer helpful. Did you? Sign in to vote. Report abuse

My on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.

my on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.

Likely a hardware issue... no way around that except to get it repaired or don't use it (the button).
Try restoring to solve the switching off problem.

My microphone does not appear to be working, people can not hear me on Skype.

My microphone does not appear to be working, people can not hear me on Skype. TIA

I have the same problem..-_-

I-pod nano click wheel does not work help!

Hi,
My i-pod nano 1st gen click wheel will not work i have tried restoring,restarting and all the 5 r's but still nothing has happened... there has to be a solution out there somewhere o yea i have also tried taking out the gunk in the click wheel but nothing HELP!

Version in the nano is 1.1; iTunes is 6.0.4.2.
This silly thing "healed itself" the next morning (?!), worked fine for two days, and decided to show the same symptoms this evening, then began working fine again.
Whether it is working or not I can feel the click of the wheel but unit shows no response when the problem is manifesting. So if I am having the problem I can press the wheel any which way for as long as I like and nothing happens -- screen does not light up, unit doesn't scroll, play/pause gives no response, etc.
HP laptop Windows XP

Oh, my click wheel does not click anymore.

Hi.
It appears the click wheel is stuck. I know the 5 R's, but is restoring the iPod going to unlock the locked click wheel?
Suggestions?

Okay, I'm still confused. Click-wheels are not supposed to rotate. They only sense your finger's rotation. Are you saying the wheel is not responding to your finger movements?
If so, I would try basic things like rebooting and switching Hold on and then off. You could also try restoring if that doesn't work, but honestly this is starting to sound like a hardware issue.

The link to portal patches(in Metalink) does not appear to be working

The link at http://portalstudio.oracle.com/servlet/page?_pageid=1787&_dad=ops&_schema=OPSTUDIO
does not seem to be working. When clicking on the links, I get that I am not allowed access even though my licenses say I am.
Also, if I enter Metalink and enter that bug number, it is not found.
What's up with that?

Don't know since when. But the last weekend I applied a bunch of SharePoint Updates and the problem seems solved now. Unfortunately I can't say exactly which update it was.
The similar problem which we had with the blog mail alerts when clicking on the "view" link, could be solve by
this workaround.

RRI - right click --- goto --- does not appear

Hi
When using the right click in a RRI the GOTO option does not appear even if the RSBBS was maintained. Any Idea Why??
Regards
Edited by: Siegfried Szameitat on Jul 19, 2010 6:49 PM

Hi Ryan,
Possible options are firstly to check SE03; Find the transport has been made or not to the QA. Second, please check the SE09 if the requested queries & RRI object have been captured on the QA. (Transport 1st the 2 queries, then the RRI object). Pls. check if during the transports there are any issues/warnings. You may check the queries properties using RSRT (Compare the versions using last changed date/time). Guess this must resolve the versioning issues.
Thanks,
Arun Bala
Edited by: Arun Bala G on Jul 20, 2010 8:37 AM

Time machine volume does not appear but backup works..

Hi. I have a Sno Leo server used for Time Machine backups. When I try to add a bew user to the backup, the backup volume does not appear (Time Machine Prefs > Select disk). The backup clients that have been previously set up work as normal.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

Click wheel does not appear to be working

Similar Messages

Maybe you are looking for