Click wheel problems when plugged into dock connector
I just got my 80gb yesterday. I'm having problems with the click wheel. I have an adapter that plugs into my car stereo through the dock connector and also a Bose docking station. With my old 4th Gen iPod, I could use the click wheel to scroll through the menus while it was plugged in.
With my new 80gb classic, it has trouble scrolling when plugged into the dock connector. Is anyone else having this problem?
Similar thing is happening with mine, except the other day my boyfriend dropped it into a cup of beer... it worked fine right away but then when I tried to use it again a few hours later it wouldn't turn on. When it's plugged into my speaker dock, it lights up and first just shows a gray screen with an apple but I can reset it and then it works fine, plays music, etc... but when I take it out of the dock the screen freezes up with these horizontal lines on it. I figured it must be battery related too but not sure.
Sorry this is really unhelpful, I just wanted to commiserate and see if anyone comes up with an answer for you...
Similar Messages
-
My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?
When I connect it to my iMac (with up-to-date OS X Yosemite 10.9.5) - it doesn't work.
Specifically - iTunes automatically launches, but then quickly shows a dialog window that says, "iTunes could not connect to the iPhone. This device is no longer connected."
Meanwhile - on my iPhone - in the upper right-hand corner (where the battery life is displayed) - you can see the "plugged in" icon (lightening bolt) rapidly blinking on and off.
In other words - it seems like, when it's plugged in - it's rapidly connecting and disconnecting (several times per second).
If I click "OK" on that dialog window on iTunes - it instantly pops back up, and continues to do so as long as I keep the iPhone plugged in.
I have tried all and stile did not resolve my problem. I tried to restart both devices, try different cable (I have original cable). Both devices are new and software's are update it on latest versions.
Thanks in advance for any help! -
Music stops playing when plugging in dock connector.
With the new iPhone os I noticed that when plugging in a dock connector thats connected to the computer and playing music it stops the music and the volume bar disappears?? Anyone else notice this.
When I want music only I set my alerts to vibrate only so it wont be interupted
Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
IPhone 5 won't charge when plugged into lightning connector one way but if it flips then it works
My iPhone 5 won't charge when it's plugged into the lightning connector one way but if I flip it then it works. It's not my charger because it's the same way with other chargers. What's wrong with my phone?
Yes I've tried multiple ones and none work. My boyfriend's iPhone 5 and my brother's all work either way the charger is turned.
-
My IPhone works with both the charging USB cable as well as the wall socket and docking station. Additionally, my IPod used to charge using both the wall socket plug in and the docking station. My IPod will stay play music when plugged into the docking station, but won't charge. Further, when I plug my IPod into my computer all it will do is charge and is not recognized by ITunes. I have done both a soft and hard reset.
If the iPhone has no problem with the same cable then
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Ipod "Click" sound when plug into the Computer
Hi All,
My Ipod harddrive clicked periodically when plugged into the computer which never happen before. I can hear the harddrive spin sound but periodically sound clicked in the harddrive.
Just wondering if anyone experienced this problem before?
Any suggestion how to fixed it? Is the warranty cover this kind of problem as well?
THanks for all replyYeah I think so.. Some of the update fixed some problem but some of them make them worse and i hate when apple didnt give the search function on Ipod with video 1st generation
Just hope my ipod has no problem regarding this issue. -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
I bought a new iPod Classic and it won't turn off when plugged into a home theater dock. Is this normal and will it hurt the iPod if i leave it on all the time?
Hi there,
How old is your Classic? Often, after a couple of years, rechargable batteries begin to fail, especially after such a long period of inactivity. This happens with any gadget with this type of battery.
Try leaving it plugged in for 24 hours, and try again, to rule out that it isn't just really low on charge. If this doesn't help, it may be a good time to buy a replacement. New iPod Nanos and Touches will be released this October.
Below, I've linked to an Apple website which explains rechargable batteries, and why yours may not be working.
Apple - Batteries
I hope this helps, and I hope upgrading your device will not feel like an unnecessary expense. Let me know if you have any more questions,
Nathan -
My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?
By a reset, I assume you meaning pressing and holding both the Select (Center) and Menu buttons (or Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear?
What happens if you try to manually place the iPod into Disk Mode? If you can do that, I would recommend connecting the iPod to iTunes and restoring it.
Putting iPod into Disk Mode
B-rock -
IPhone only turns on when plugged into wall
Hello, I have an iPhone 4 CDMA and it only works when in is plugged into the wall. It does not work properly anyother time. When I plug it into the computer it goes through the Boot Loop. When I put it into DFU mode and recovery mode and try to restore it in iTunes it doesn't restore and just gives me a bunch of different error codes. The most common error codes are 2001, 2006, or 1604. It use to give me Error 21 but I fixed that by editing the hosts files. I have tried six different computers and seven different iPhone cables on the computers and I still get the same error codes every time. It does not work if it is not plugged in. I have replaced the dock connector/charging port and the battery. I bought it used and think it may have been jailbroken at on time. It has not been jailbroken in the time I have had it. I have also tried Tinyumbrella and that did not work. What could be wrong with it?
Hello! When it turns off, do you notice if it drains quickly or does it just shut off even with full battery? Because this can also be caused by battery problems. Your iPhone may not be turning on even when plugged into a computer because a wall outlet charger gives off more power than a computer does.
I suggest you bring your phone to an Apple store right away. They could at least help you determine the problem, and by then, you can decide what to do with your iPhone - you can have it repaired (if they say it's still fixable), you can have it replaced with a refurbished iPhone, or you can buy a new phone completely. -
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
Mouse only works when plugged into a specific USB port
Hello. I'm using a HP optical mouse that connects via USB plugin.
HP PIN: 505062-001 Rev.A
Operating System: Windows 7 Home Premium SP1
It only has full functionality when plugged into a specific USB port on my desktop. I can't get it to work with any other ports or chained with a HUB plugged into the port it likes. All of my other USB devices work fine with those ports and my HUBs. The red light on the bottom lights up but the mouse pointer does not respond to movement and clicking the buttons does nothing either.
1) I'm confident, that it's not a problem with the desktop hardware
2) I'm confident, that it's not a problem with the mouse hardware
When the mouse is fully functional, it's displayed under Devices and Printers, in the Devices category as "USB OPTICAL MOUSE".
When connected with the other ports or through a HUB, it appears as TWO entries in the Devices category: "HID-compliant mouse" and - here's the suspicious part - "HID-compliant keyboard"
I suspect that something's up with the driver for the mouse. Any clues, as to which driver I need? Or, is the cause of the problem something else entirely?Hello Tick_Noby,
Your mouse only works in certain usb ports.
Has the mouse ever worked in the ports?
You can go to device manager and uninstall the fake keyboard and the mouse and restart the computer.
It seems that the driver is not correct for the mouse.
Also reset BIOS defaults.
Turn off the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes
Have a good day. -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
Hi, my iPhone 4S will be playing music or nothing and it will randomly stop! I doesn't even show the volume bar. It goes right into
dock connector mode when it's not even on a dock. It only does this when I want to play music through the iPhone speaker. I
don't know what to do or how to fix this, It started doing this when I was on 5.0.1 and I read something saying it would help
to upgrade my phone, so I went to 5.1 and nothing was fixed, sometimes it does this and than it doesn't. For me to get it back to
normal I need to hold down the Siri button and select the way I want it to play when the device button comes up and it says
" iPhone " , " iPhone Speaker " and sometime it won't even say those. Will apple give me a new phone if I take it in? I never signed up
for Apple care. I just got this phone in February 2012. PLEASE HELP ME.Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?
Unless and until is has been, Apple will not do anything, beyond the basic troubleshooting listed above. -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!
Maybe you are looking for
-
How do I only see the music on my iPad?
So far the only way I can see only the music on my iPad is to go into setting and under music deselect 'see all music'. Wouldn't this button be better in the music player itself to quickly see what is in the cloud and what is on the iPad? Or maybe
-
QuickLook / Preview and PDFs with hidden layers
Hidden layers in PDF files show up in preview, quicklook and in the generated thumbnails. Is there any known fix for this to get the content to render with only the visible layers?
-
I cannot select a single character
I'm running Pages 5.2.2 on MacOS 10.9.4 on a 2011 MacBook Pro. The problem is I cannot select a single character with my Magic Mouse. If I try to drag over a single letter to select it, the cursor is positioned either before or after the letter. I ca
-
How do you format sysdate? I want the results to be in date format, but I only want the date itself without the time added as 6/14/2010 The To_Date function doesn't seem to work as it converts a string to a date and sysdate isn't a string? Thanks for
-
BAPI/FM for Split Postings in the Cash Journal (Transaction FBCJ)
Hello Genious, Please help me.I need a BAPI/FM for Split Postings in the Cash Journal(Transaction FBCJ).The FM(FBCJ_POST and FBCJ_POST_ALL) which is used on this transaction is not released so i can not use that FM. Can anyone please help me? Please