Click wheel stoped responding.

Thanks to King cole for all his help with my last problem,
I now have a new one :S
I did a power drain, and reset the iPod, not the click wheel wont respond to movement, i can get into the menu and play songs, but I cant scroll through them, nor can i scroll down... i've tried to reset, and each time i do, the main menu pops up straight away, and wont let me reset :s
Any ideas? i've searched back to page six on here, and havent found any answers, nor have i found them through the support.

I hope i am :s, its the way i've always reset, i'll try again, but each time, the menu just pops up right away (I have just updated the iPod, could that be a reason? as to why its not working).
Its like opening a flood gate this, one problem, then another...
Nothing, i did what you said, and infact, think i now have dents in my fingers

Similar Messages

  • IPod Click Wheel Not Responding to Anything

    I have the iPod click wheel 40 GB and it is not responding to anything. When I hit any of the buttons, an apple appears on the screen and then changes to a picture of an iPod with a sad face and an exclamation mark. This website also appears at the bottom. I have tried all of the five Rs and the iPod is not responding to anything. The battery will not even run out. What can I do?

    try dropping it or hitting it. worked for me. i was about to buy a new one and i read a forum here that had many people posting that they just gave it a good whack and worked fine again.

  • Ipod nano click wheel not responding

    My daughtr's ipod nano click wheel is not responding even after
    I did the 5 r's.

    Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • Click wheel wont respond

    i have a 4th gen ipod.(no color screen). And every now and then the click wheel will no longer work for a short period. I can still select items, but i cant scroll through anything. What should I do?

    Try a reset...
    Resetting iPod is it appears frozen or doesn't respond
    btabz

  • Ipod 1st generation click wheel not responding - won't reset - apple icon

    My ipod won't reset or show up in itunes when connected.  Apple icon seems to be frozen on screen.  How can I reset it?  Help!

    This is really the 1st gen iPod from 2001, with a non-touch non-click wheel that physically turns, and connects with a FireWire cable?
    Make sure the Hold switch is not in the ON position?
    The older iPods did a reset differently from more recent iPod that have a click wheel.  Be sure you are following the appropriate reset steps in this document, based on the actual iPod model.
    http://support.apple.com/kb/HT1320
    If it's a 1st gen iPod, it would be How to reset iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector).  The buttons to press and hold are different from later iPods.

  • My click wheel stop responding

    my wheel just does not work anymore, i am trying to figure out if it is the board or not be cause the drive was not working then i replaced it and the drive works now but no wheel

    OOPS, it you've replaced the hardisk, then most likely you have to reopen it and put back the click wheel assembly, or buy a new replacement click wheel from ebay.
    But better send it to 3rd party service to fix it.
    Have a nice day.

  • My click wheel stops responding

    Whenever I try any of the solutions apple has, my click wheel will start working for a little bit and then it will freeze again. Can anyone help me?

    Not until you provide all the details of what you have already tried. 

  • Ipod nano 2gb click wheel doesnt respond

    I got my ipod nano 2gb for christmas and it worked fine. Now when I go to use it the click wheel works and I pick a song and play it but then the click wheel would'nt work anymore. I have tried reseting it and updating it but nothing worked. Any ideas are good thanks.

    THANKS

  • Click wheel dosent respond I need help

    I just bought a 20 gb i pod on ebay that was working when I bought it. For me to download songs I needed to restore it he was using mac and I use windows.So when I restored it it seems that every thing went fine but it is stuck on the language menu and the click wheel dosent work.I dont know what to do can some one please help it was working fine.

    I think ill just go buy a microsoft zune bill gates shouldnt have this many problems! I still cant figure it out restored the dang thing 10 times already.I have even done a diagonistics test on i pod all green lights.i am going to try to drain battery to see if it helps.i have a bust buy gaurentee till 2008

  • Can't Get My Click Wheel to Work

    I just updated my software on my ipod and restored all of the settings now i can't get passed the language prompt.

    OK first off thanks for the response to my issue. As of right now i am not getting the ipod to force itself into disc mode but I am trying to stay positive about the situation and hope my dilegence will pay off. Let me try to explain the entire problem from the get go and hope that you or someone else might be able to get this thing up and running again....
    My ipod was working great for years until one day i went to turn it on with an entirely dead battery... I at first got the dead battery icon which then turned into the 'do not diosconnect' prompt... After an hour or so it turned into a sad ipod icon... I took it to the apple store they told me it was a hardware problem and i would not be able to retrieve any files off of it to put back on my pc's hard drive... Being the optomistic type, I tried once again and got my pc to recognize it once again so i immediately purchased an ipod to pc file transfer program and was at least able to restore the files back to my pc's hard drive (proving the apple genius rep. to be wrong)... From there i did a software update and then a settings restore... now i can get the language prompt to come up on the ipod's screen but i cant get the click wheel to respond... yet it will reset and turn off using the conventional click wheel method which proves the click wheel is being seen by the ipod but why can i not get it to go any further? This is where i stand... Anyone have any other ideas? (This ipod is like a baby to me... I just lost my job and cannot afford to purchase another. PLEASE HELP ME SAVE MY BABY!)

  • 3rd gen ipod click wheel.

    My 3rd gen nano click wheel doesn't work. I have reset my ipod. I can't get the click wheel to respond to my touch. The center button works but it is REAL slow to respond. Any suggestions?

    Oddly enough I just found out by accident that the click wheel works perfect..... when the usb cable is plugged into the computer. I click eject in itunes and then I use the click wheel freely. If I unplug the usb from the computer or from the iPod it stops working. Anyone have this same problem?

  • Click Wheel Problem on 4G Ipod

    Hi,
    Recently my 4G Ipod scroll wheel has stopped responding to touch scroll-buttons work fine. Reviewed posts to see this is a common problem. I have had some success but need more advice.
    This is what I did
    1. Reset, Restore etc- did not make wheel scroll
    2. Opened up Ipod, lifted up battery and cleaned areas on back of click wheel including tape like connector. Also used compressed air. In general not dirty at all.
    --At this point my click wheel now responds to touch but after drilling down on a choice and then back up to main menu it stops responding.
    --However if i toggle hold switch it "fixes" it for a short while--previously this did nothing to fix it so a bit better.
    3. I do not have the proper screwdrive to remove circuit board so don't want to do that just yet. BTW where do i get one?
    4. Put Ipod into diagnostic and ran WHEEL test. The numbers move from 0 to 95 suggesting that the click wheel is not broken however this works intermittently also. But if i toggle hold in diagnostic mode then the click wheel works for a short while.
    Should I bother trying to further breakdown the ipod to clean the wheel etc?
    Any other contact points I should clean?
    Why does the toggle switch fix it for a short time?
    Would changing out the click wheel fix the problem?
    Please help!

    If this isn't a hardware issue, I would recommend toggling the hold switch back and forth then trying the reset again. If that doesn't resolve it, I would try restoring the iPod to make sure it's not software.
    If none of that resolves it, though, it will likely be an issue with the hardware and you'd want to set it up for service if you're still in warranty (but from what I know, this model is probably out of warranty).

  • IPod nano, click wheel, 3rd generation

    Click wheel not responding, can only get the screen to light up when I lock and unlock this ipod nano? Sync works but can't select anything even after a reboot.
    Any suggestions?

    First thing to check is if the iPod is locked. I had the same problem the other day and I am very new to iPods (4 days!).

  • My IPOD CLICK WHEEL IS ALL MESSED UP

    Sorry for the caps but this is killing me. My I Pod first started pausing randomly when playing songs, then that problem went away, now the click wheel wont respond so i cant use any feature(It actually will work once in a while for a bit, then it will stop again)I have reset it many times and have even done a full restore, I havent dropped it, or got it wet, the only thing different i was doing is running it for a longer time(as a stereo at a bar), any body else have this problem??? anyone now how to fix it??
    PC   Windows XP  

    Try this: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?cc=us&docname=c00273943&lc=en

  • My click wheel don't respond!

    Yeah, my Ipod (video) is frozen even after the reset? The click wheel doesn't respond but the battery is full.
    I can open it by turning the hold on to off, but the click wheel doesn't work, I don't know what to do!

    Welcome to Apple Discussions!
    What happens when you press play? Does it play anything? Do the buttons work?
    Also, you may want to try a restore as well...
    Restore the iPod
    btabz

Maybe you are looking for

  • How to delete duplicate values in a column?

    consider a table contains 2 columns(NAME & DEPARTMENT) NAME DEPARTMENT santhosh finance santhosh marketing rahul sales stephen IT stephen sales In the above table how to delete only the duplicate values(santhosh,stephen) in the column?

  • No Secondary IDE Channel

    Howdy, I purchased a KT7A Pro board.  Upon installing it I found that I could not get the secondary IDE channel to recognize my drives. I enabled it in the BIOS (Lateset) but nothing worked. I tried changing cables and jumpers & everything else that

  • Slow-motion (high shutter speed) camera to video my golf swing with 240fps

    What is the best model to choose?  Would also like a shutter speed of at least 1/2000. I had a Canon SD4000IS that did the trick but was lost (don't ask how!).

  • Method design question...and passing object as parameter to webserice

    I am new to webservice...one design question i am writing a webservice to check whether a user is valid user or not. The users are categorized as Member, Admin and Professional. For each user type I have to hit different data source to verify. I can

  • Control Center Jobs - Workflow execution history not being shown

    Hi all gurus, We have recently migrated to owb 11.2 from 10.2. In DEFAULT_CONTROL_CENTER, we can see deployment history, but the "execution" tab is empty. Though we have executed several workflows, they are not shown in the execution TAB in "Control