ClickBIOS II update for Big Bang Marshal?

Will MSI release a ClickBIOS II update for the Marshal (and/or older P67 boards like the GD53/55/65/80)? The new interface is day and night in comparison with the older ClickBIOS and is much more pleasant to work with. It would be nice if these were added for people who paid good money for their less-than-a-year-old boards, especially the $399 Marshal.

Quote from: Jack on 28-January-12, 18:42:09
The answer is most likely going to be "NO". The chipset is old already (Z68 came after that, Intel 7 chipsets are coming out soon (X79 is already out)). Click BIOS II was never advertised for this board nor was an update promised.
Click BIOS II would also not add anything in terms of functionality, it would only be an aesthetic upgrade.
That is exactly my point as I detailed in OP. The user interface is a lot simpler to work with compared to the original ClickBIOS, and porting it over should require minimal effort as it doesn't need to adapt to any functional changes. I know very well when the chipsets were released, but P67 is the same generation chipset as Z68 with similar (less) functionality of Z68. The question is not in the chipset, but rather MSI's business model that will decide whether or not they're willing to extend their support for slightly older motherboards, not to mention they will have to release a BIOS update for all P67 boards to add Ivy Bridge compatibility anyway. If you ask me, spending less than an hour to port over the interface to extend that support would be an incentive for customer loyalty.

Similar Messages

MSI Big Bang Marshall (Intel P67) - MSI ClickBIOS II?

Hello, MSI related population of the planet.
I would like to ask if there is a BIOS ClickBIOS v2 for the motherboard Big Bang Marshall?
MSI only informs there is a ClickBIOS and it looks like the 1st generation. However, on other motherboards
which were launched approximately at the same time (such as Z68A-GD65 or Z68A-GD80) there is a 2nd
version of MSI ClickBIOS. My question is, if the MSI ClickBIOS II is also available for Big Bang Marshall board?
I thank you kindly for your answer and wish you a nice rest of the day!
Best regards,
lazyone1

Best way to find out may be in contacting MSI Technical directly. Only the Z68 G3's had Click II, not the first released Z68 B3's.
>> How To Contact MSI <<

MSI BIG BANG MARSHAL -- UEFI-(Click-BIOS)-BETA Releases [MS-7670]

I will upload the latest available BETA Release for the BIG BANG MARSHAL mainboard: E7670IMS.113 [v1.1b3]
Changelog:
E7670IMS.100 ---> E7670IMS.113
- Fixed the system will hang in blank screen when press F11 to select UEFI DVD installing 64Bit OS issue.
- Fix DRAM Timing not match SPD value.
- Add the new BOM support.
- Improve mouse compatibility in bios setup menu.
- Change the Package C State limit item default value.
- Fix the PC Health Status show N/A issue when use the User PassWord entering the Setup.
- Fix can not entering dos mode issue when onboard lan controller set disabled.
- Fix plug 4 dimm G-Skill F3-12800CL7D boot fail when XMP enabled.
- Fix mouse click will hang 0Dh in some page when entering setup with user password.
Flash/use this release at your own risk!
For BIOS Update: >>Use the MSI HQ Forum USB flasher<<

Hey guys real quick. So after updating to the new 7670IMS>310 bios so that I may use my GTX780s, I reinstalled with windows 8. Everything was fine until I was on teamviewer just last nite and upon switcing sides my bios got corrupted. How do I know you ask? Upon getting back into windows my LANS did not work so I had not internet connection. I tried uninstalling it from Device Manager and deleting it. After a few clrmos. I thought I would switch over to the other bios and see if the LAN works and it does because of the status lights because now it lights up. So I switch back to main bios and LAN works but it would not post whatsoever and just cycles through post finally ending with a " DE ". Not sure what the new LED DEBUG codes are but if someone could post it would be nice to be able to refer to it.
Anyways on win 8, no matter what it will not let me into windows And when it looks like it will...gives me "your pc ran into problems and we are collecting data and we'll restart after" message. After a few of these wonderful messages, I decided I was going to flash my bios again. It did look like I was sucessful until after restart it did the same thing. Going through post I saw 19,15 then shuts off. Does this and ends with "DE" pc still on but nothing. No windows.
I got lucky a few times and was able to get into my bios and decided I was going back to Win 7 64......I put the good ole XFX6990 back in and got windows 7 to reinstall and continue to flash my bios to an older one. I used your method before and it work> from 3.0 back to 1.5 then from 1.5 back to 1.2 for OC purposes. So i tried that method but it looked like it just reflash it with 3.1, odd.
So after a few restarts everything seems fine, no cycles just normal. When I reboot normal process no double boots or cycles this time so I thought hey, that fixed my corrupted bios somehow. I thought I gotten lucky.... So I switch out the good old 6990 and in with my 780s. Reinstalled win 7 and upon completion of windows update. Again with the cycles of 19,15 turns off does this again over and over like 5 or 6 times and ends with "DE"
And this is where I'm at atm. I remember when I DL'd the flasher and bios. I only saw 2 files which was " VALVE CHECK AND E7670IMS.310".
When I tried to do it again with the same method as the first I have "
#BIOS
#BK_6.Z7
#EFIFLASH
#MSIHQ(icon)
#MSIHQ_INFO
#MT420"
This time it does not go through the same when flashing, just tells me bios update complete. I've done this a million times and all have been successful.
Basically I'm still on 3.1 bios but I 'm curious as what other methods do you suggest I try now? I have left everything alone after reinstalling windows and updates. Everything seems okay, reboots fine no cycles and still get the random hit or miss with 15,19 turns off cycles and ends with "DE". Would like to get a resolution if possible. Thank you and I know I said real quick right, but really. Thanks for any help.
I'm going nuts!!

My graphics lost its mojo on big bang marshal.

Things were going along quite happily until a week or 2 ago when things started lagging, programs not quite opening as quick as they used to, lags in web browser scrolling that sort of thing. SSD was getting full so it got the business ( properly wiped with ocz tools and windows reinstalled ). Things were still laggy so I run a 3dmark... I lost 1/3 of my graphics power.
Where I was getting 36k on vantage, Im now getting 24k. Ive tried all sorts of things and 3dmark scores are still low. When Im running graphics apps, both cores are working at 100% but the temps are not getting that high. According to afterburner the clocks and shaders are the right speeds. Everything seems fine but its not quite.
My rig...
8gb of mushkin 2133 ( running at 1600 )
2600k @ 4.8 ( run at 5.0 for benchies. Still not got around to water yet )
120gb ocz ssd
2x6950 twin frozr ii
msi big bang marshal
corsair 1050 hx psu
windows 7 64 ult
http://3dmark.com/3dmv/3681293 <<-- 36k score
http://3dmark.com/3dmv/4061865 <<-- 24k score
http://3dmark.com/3dmv/4065557 << 1 card in slot 1
http://3dmark.com/3dmv/4064981 << the other card in slot 1
Single card speeds are about 14-15k, normal speeds should be about 20k.
GPU-Z says this http://www.techpowerup.com/gpuz/dzm44/
the main difference I can see between the first 2 links (besides obviously driver version ) is the amount of video ram being reported. The low score reports 4gb and the fast score reports 2gb. Its like xfire isnt working properly. Righto, if anyone has any ideas, I would be all ears and love to hear them.

i did update the firmware and reinstall the driver as u suggest and the problem persist
http://img13.imageshack.us/img13/1254/23575005.png
when i restart the computer i can see it in the boot menu and when the windows start here is what i get
http://img199.imageshack.us/img199/4364/81488297.png
when i go to the propriety i get this
http://img198.imageshack.us/img198/2084/24869943.png
i did test my usb device in the pc of my friend he have usb 3.0 also and it's working, the transfer is too slow ...did test it also on usb 2.0 and work too , and i did pluged my usb mouse and keyboard on port usb 3.0 and they work fine too
another thing
http://img547.imageshack.us/img547/7959/28794399.png
i did install this driver many time and LU still telling me to update it

MSI Big Bang Marshal - Questions

Hello all
I am new here and I have been doing research on components for a new computer I am making a shopping list for. I have a few questions I have not been able to find any information online. Here goes
1. Anything specific I should know about the motherboard other then whats in the specs? Problems, quirks, etc?
2. Does the motherboard only support 2x Dual Video cards like 2x Nvidia GTX 590 or can I use 4x Nvidia GTX 480s?
3. P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
PCI_E1 - 8x
PCI_E3 - 8x
PCI_E5 - 8x
PCI_E7 - 8x
Makes up 24
But there are still:
PCI_E2 - 1x
PCI_E4 - 1x
PCI_E6 - 1x
PCI_E8 - 1x
Left. Does that mean there are no lanes left and I coudnt even fill anything in the other 4 slots like PCI-E Sound, etc?
4. If you do Dual, Tri, Quad-SLI and have a PhysX card, how many PCI-E lanes will your PhysX card consume? Is it set by the NVIDIA control panel, the number of lanes of the chipset divided by the mount of video cards or by the card itself?
5. When people say Dual, Tri, Quad-SLI +PhysX, does it mean (Dual -1(PhysX), Tri -1(PhysX), Quad -1(PhysX) or does it mean (Dual +1, Tri +1, Quad +1)?
6. I know Scalability of increasing arrays of video cards is pretty poor, but could I do Quad SLI +PhysX using the MSI Big Bang Marshal?
7. Which is most advantageous, Tri SLI +PhysX, Quad SLI, Quad SLI +PhysX?
8. Sorry, probably not related, but I wanted to do Raid with SSD's for very fast reads and writes yet have redundancy. I wanted to get some OCZ Vertex 3s and I was reading about how Raid 5 was interesting but apparently Raid 5 increases the degredation of SSD? Has anyone experienced this or have any suggestions on best raid configurations?
Thank you for all of your help

Quote
P67 motherboards with the nf200 on them support 24 pci-e lanes. if I use:
PCI_E1 - 8x
PCI_E3 - 8x
PCI_E5 - 8x
PCI_E7 - 8x
Makes up 24
By my count, that makes 32 lanes. If not done so, a lot of pre preparation information can be gathered at the MSI Global Website. All the basic & more detailed information can be found there. The downloadable pdf manual is usually much more comprehensive than the manual that comes with the board as well, & can probably answer a lot of your questions. I don't believe the board can do Quad GTX 480 SLI.

MSI big bang marshal B3 HECI pointer mismatch

Hi all
I have a MSI big bang marshal B3 with a 2600K cpu, i flashed the motherboard with 3.1 and 3.0 bios but can't change cpu multiplier
Finally i went back to 1.5 bios and all is good but now i have the "HECI pointer mismatch" at boot and can't find my secondary HDD in Windows.
I tried the MSI USB flashing Tools but same problem
Thanks to all for your help

You have this issue due to a downgrade without a special archive required. It is actually recommended to use bios 3.1 any way. Note that you need to use +/- keys of numpad to alter core ratio in later versions.
https://forum-en.msi.com/index.php?topic=166680.msg1220674#msg1220674

How to configure the bios of the big bang marshal p67 (help)

Good afternoon people I'm new here, I hope to be posting in the correct forum, and come on, I recently bought a Big Bang Marshal P67 B3, I'm using a vcore [email protected] to 1:42 daily and a kit of 2200MHz 2x2GB Gskill PIS, but whenever I play the machine locks up and has the blue screen, I'd love your help on all the settings I need to do to leave my bios over 100% stable.
Thanks in advance for help.

Quote from: HU16E on 04-August-11, 11:28:03
Right click 'Computer', then left click 'Properties', 'Advanced system settings', 'Startup and Recovery' 'Settings', uncheck 'Automatically resart'.
Disabled.
Thanks buddy, now I found.
I'll take and post all the screens of my bios, if possible tell me if you configured everything right or if I need to change something ok.
Every time I try to run prime95 linx or just going to play, does not take long to see this screen.

Why is no season pass available for Big Bang Theory Season 6 in the Australian iTunes Store?

Season 6 of The Big Bang Theory is now showing in the Australian iTunes Store. So far only one episode is available.
Where the "Buy Season Pass" button usually is, it instead says, "Partial Season". I can't see any option to buy a season pass.
Why is this? What does "partial season" mean? If I buy the one episode available, will I later get the option to "Complete" my season? Will the full season eventually be available?
Thanks anyone for any light you can shed on this.

You would have to ask whomever holds the U.K. distribution rights to the show.

XMP for Big Bang Xpower with BIOS 1.6

So the problem is when setting XMP mode to enabled it causes the BIOS to not recognize all 12GB with it disabled it always recognizes all 12GB of ram...
This is 6 sticks by 2gb a piece of Patriot Sector5 Viper II PC 17000 Ram.
In windows I get random BSOD's of mainly memory management errors. CPUZ will detect all 12GB in windows...
Is there a fix or maybe a new bios going to be released to fix this memory problem?!?!?????

I got a BSOD today.... this is with default BIOS. no over clock...nada
PFN_LIST_CORRUPT.... STOP 0x0000004E
I have seen this one before as well... on a side note...
This is the second motherboard I tried...I also tried with a 980x retail and It would still crash...
Im thinking its the motherboard and the compatibility with my ram...
Also the heat on this board is fairly hot I know I dont have fans facing my motherboard because I just keep the side panel off because Im always messing with the stuff inside....
Another thing to note is memtest86 crashes completely at random parts...usually early...and sometimes it runs all night...
I tried to see if it only crashes with a certain stick of ram but if it crashes all it needs is a reboot and it might run correctly for a long time....
Im really at ends to know exactly whats wrong... but I think its this kind of motherboard and ram setup..... Any one in the world use patriot sector 5 2133mhz ram on a big bang xpower???!?!

Ipad showed update for "Big Oven" which I started and it is stuck on downloading - help please as I cant use ITunes

Several users seem to have this problem and I am really stuck

Isn't that an app? You don't download apps in iTunes. Maybe you have a stalled song or TV show in iTunes that is causing the download of Big Oven to stall.
Try tapping on the icon to pause the download and then tap the icon again to resume the download.
Then try rebooting the iPad if that doesn't work.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Still problems installing win7 on a Big Bang Marshal

could someone please instruct me how and what to do ?????
I have not been able to make a complete installation of win7 on my new build
The last message I have been given is that It was unable to update the registerdatabase data in the installation !!!!
I have done a CMOS clear up using the clear CMOS button and I do not know if that is the reason for my problems
Do I need to enable AHCI and enable both hotplugs for my SSDs !!!!!!
Many thanks in advance

AHCI may have some problems with SSDs, you can stick with IDE mode.
Pardon me for asking this but is your Windows 7 a legit copy?

MSI Big Bang Marshall B3 RAM and VGA card compatibility question

Hello
I am thinking about upgrading my RAM and VGA card but will those be compatible with my mobo?
Zotac GTX680 AMP Edition and GSkill Ripjaws 4x8GB F3-12800CL9D-8GBXL kit.

Hello
I am using Corsair 850W PSU and my BIOS version is 1.5. I made an error by installing v3.0 BIOS but thanks to dual BIOS feature I was able to save my system.
I am thinking about buying those RAMs because there is a great discount on Turkey at the moment. (Nearly half price of other competitors)

Hi big bang xpower 2 not working pci-e5 help!!do i need rma

hi please help mobo not working pci-e5 - mobo big bang xpower 2 bios 1.5 beta G.SKILL Ripjaws X Series 8GB Memory Model F3-17000CL11D-8GBXL p/s OCZ ZX Series 1250W Fully-Modular 80PLUS
gpu R6970 Lightning (3pc) cpu p i7 3960x
[/list] i have clear the CMOS still not working !and update bios BIG BANG-XPOWER (MS-7737) V1.5 BIOS

bro i have tested single slot at pci-e5 not working thank i going rma mobo thank for your help!

Intel Raid Vs Marvel Raid on Big Bang B3 Marshall (Non OS Drives) via win7 setup

I apologise in advance if this seems lazy but has anybody tried setting up RAID 1 mirroring of two non-essential data hard drives within Windows 7 64-bit as opposed to a bios setup?
I only need to mirror a games hard drive so as not to have to do manually backup the hard drive with Acronis software backup every other day or so.
I have a Acronis backup of the game hard drive as I am aware that creating a raid array on both drives will delete all data on both drives but I can restore my games software later.
As it was a non-essential raid array (non-OS drives) on my previous hardware setup for these two identical games drives before upgrading to the MSI big-band Marshall B3 I totally forgot to set up the raid whilst doing a fresh install of Windows 7 on a dual boot with a previously restored/Acronis universal restore of windows 7 which also had this raid array.
If that all makes sense I'm hoping you guys can put me in the right direction as to Intel on Marvel (I seem to remember reading in the past that Marvel Raid drivers had issues) preferences for a setup within Windows 7 64-bit rather than the bios setup which would mean starting from scratch which I'm not prepared to do on a non-essential, non-OS Raid array.
If however I was doing an essential OS drives Raid array then it's a no-brainer to do a BIOS setup with a fresh install.
Any thoughts much appreciated, cheers

I don't think you are looking at the right areas.
Quote:
Sonnet Tempo cards are compatible with most external SATA storage. However, external hard drives with USB 2.0/eSATA dual interface based on the Oxford Semiconductor OXU931DS storage controller chip may not be compatible with Mac OS X when connected via SATA. Known issues are kernel panics occurring when the drive is connected, or the drive not being recognized by the operating system.
Western Digital manufactures Desktop edition (WD Caviar, Caviar SE, Caviar SE16, and Raptor X) hard drives and Enterprise (RAID) Edition (WD RE, RE2, and Raptor) hard drives. Each type of hard drive is designed to work specifically in either a desktop computer environment, or connected to a RAID controller (hardware or software-based). If you intend to configure Western Digital drives in a RAID set, Sonnet and WD recommend using only their Enterprise edition hard drives. For more information, see this Western Digital FAQ.
EndQuote
http://www.sonnettech.com/product/temposatae4p.html
Not everyone follows guidelines like they use to. Enterprise and RAID Edition drives - even Green RE4 series - not noise. You want a good drive enclosure with adequate cooling from air flow and fans. These are not silent and any drive noise is just background hum and noise that they are working.
http://macperformanceguide.com/RecommendedESATAEnclosures.html
There are dozens of reviews on drive storage. If noise is over riding then you aren't a candidate for RAID, but you are for SSD and Green, and would find SilentPCReview up your alley.
http://www.silentpcreview.com/

My Review for MSI Big Bang Xpower & Overclocked

This will be the very 1st X58 big bang series of MSI and the 1st X58 MSI motherboard to have USB 3.0 and SATA 3 connections. Targets the enthusiast, hardcore gamers as well as overclockers. This board is already equipped with OC Genie buttons which was first implemented for MSI P55 series motherboards. YOu will also see later that instead of the old power, reset and Direct OC Easy Buttons. They are all now soft touch. PCI slots were also removed and been replaced by PCIEx16. There will be x6 PCIEx16 slots for this board ready for multi gpu setups. Military Class Components are also implemented into the board like Solid Caps, better chokes and server grade caps.
Here you will see that the components around the socket area are well layout and very good in quality. These are Hi-C Cap on PWM and super ferrite chokes. Im sure this will provide the best efficient voltage to the processor during normal use and as well as during overclocking. See the two 8pin power connector for the Processor? This will provide more headroom for overclocking the processor especially for Gulftowns
Forgot to mention other things like The board has V-Check points to measure actual voltage for CPU Vcore, VTT, DDR and IOH. Debug led indicator for easy isolation of boot up problems or mobo problems. Jumper for removing voltage wall limits and lastly the board includes an audio card for best audio experience.
So next these are the rear ports
Bundled Accessories. Sata cables, Sata power, IDE cable, USB 2.0 Bracket, eSATA Pack, M-Connectors, V-check Cables and a great gadget for overclocking the board on the fly "OC Dashboard" (shows also the current temps, and voltages)
For some serious 2D Bench Results and overclock on air
First run. 4.6ghz Spi32M
Second run. 4.8ghz Spi32m

Quote
What were your settings to get those overclocks?
He's in a competition, I doubt he will reveal this information.

ClickBIOS II update for Big Bang Marshal?

Similar Messages

Maybe you are looking for