ClickBiosII will not run - SCEWIN_64 has stopped working
I've been up and running for about two weeks on a new motherboard that I recently installed (info below). Everything was working fine and I had the ClickBiosII running and was working fine. I just installed the MSI LiveUpdate 5 and it reported that there was a new Bios download available which has a fix for a Windows 8 issue (which I'm running on Windows 8) so I decided to do the update. Once the update completed (which appeared to complete successfully and rebooted the computer) then my ClickBiosII will no longer start. All it does is display a message at start up reporting:
SCEWIN_64 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I've uninstalled it (totally cleared out it's installation directory), reinstalled it back with the original one from my setup disk, still failed.
Uninstalled it again and used LiveUpdate5 to download and install the latest one and it still fails.
When I do try to run it and it fails, the Task Manager for Apps, shows: ClickBIOS_Loading (32 bit)
And there is a Background Process of: MSI CLICK BIOS II (32 bit)
I have to kill both of these before I can even attempt to try to run it again.
WHY isn't it working any more just with a Bios update???
System Info,
Board: MSI H77MA-G43
Bios: Version 1.90 (previously it was 1.8 before I updated it to 1.90)
VGA: NVIDIA GeForce 8600 GT
PSU: (I have no idea what this is??)
Intel Core i5-3570, 3.4 GHZ, 6MB Cache, LGA1155, 77W
MEM: G.Skill DDR3-1600 PC3-12800 4x4gb F3-12800CL8D-8GBXM
HDD: SanDisk 256gb SSD
COOLER: CPU stock fan/heatsink
OC: N/A
OS: Windows 8 64bit Professional with Media Center
The MSI register site really sucks!! I usually don't get very frustrated at company sites much but the MSI site stinks. I've gone in and created an account, but there is no way to register my product. Every link I click on there displays a Message with only one button on it "Back to Member Center" which the screen automatically goes back to the previous window on it's own.
I've tried the Technical Support link and I get a "This page can't be displayed" message.
So I can't get to any support from MSI itself. I wish I had known this before I purchased this mother board!
Similar Messages
-
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.
When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up. -
Prel 13 saved project files will not open, or Prel stops working.
Sandgrass-Saved files of Prel 13 projects will not open in Prel 13. Is there any way to reclaim/alter these files to where they will open? Could there be a missing codec?
My computer—Hpe 580t, Win 7 Professional 64-bit OS with second internal 1 TB hard drive;
Intel R Core, TM i7 CPU 950 @ 3.07 GHz, RAM 9.00GB
All of my clips and stills were taken on my Nikon CoolPix P500. They will import just fine from PSE organizer or from Prel 13 organizer and I can edit just fine. The trouble seems to be when I attempt to open the saved project files for further editing or adding movie theme and scene markers for a 54-minute movie.
I have tried opening from within Prel 13 and from the stored files on my Data Drive E:. Prel opens the project and tries to load; then an error msg appears: “Premiere Elements has stopped working. Windows will close the program and let you know if a solution is found”, or an error message says "Cannot open:---this file is not compatible with Pre"l. Only one copy of several edited and rendered copies of the project will open, and I am very afraid to touch it until someone can maybe suggest a solution. I tried saving copies of the one working file, but none of them will open. Thank you for your assistance. SandgrassLionkillerArt
Did you say that you were working on Windows or Mac? For now, assuming Windows,
1. Go to the Adobe Folder in Documents (should be there unless you changed the default).
2. Locate the project.prel file of interest in Adobe Folder/Documents Folder/Premiere Elements Folder/11.0 Folder. Inside the 11.0 Folder, among some folders and other files, are the project.prel files if you did not do any special organization. Right click the project.prel of interest and select Open With, followed by Premiere Elements 10. Does the project now open?
Do you have any versions of Premiere Elements on your computer except this Premiere Elements 10?
Have you deleted or moved any of the source media that went into your project after you saved/closed any of these projects? Where are your source media stored? If on an external hard drive, is the drive letter of that drive changing on its own?
What happens if you rename one of the problem project.prel files in the Adobe Folder and then try to open it from there?
Just some thoughts for now.
We will be watching for further developments.
Thanks.
ATR -
My scheduled Do Not Disturb function has stopped working; help!
I have the iPhone 5 & the scheduled Do No Disturb function recently stopped working which I was using daily. The regular Do Not Disturb (on/off) still works
A known Issue... This is what Apple says...
http://support.apple.com/kb/TS4510 -
Premiere pro has stopped working and must close
Premier pro has been installed through CC and will not launch. 'has stopped working and must close'
drivers up to date
have signed in and out of CC
have uninstalled and re-installed all premiere pro content including cache
have changed the compatibility mode and tried using as admin
still the program will not launch.>drivers up to date
Did you verify that at the vendor site?
For Windows, do NOT rely on Windows Update to have current driver information
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2 -
Itunes has stopped working when i go into the store
whenever i go into the store it will say that itunes has stopped working it loads about half way but then stops what is going on? how do i fix it?
I have been having the same issue the last two days. I'm using my computer, Windows 7, 64 bit, completely updated computer. Ran diagnostics which found nothing, no firewall issue, etc. Wish I could help you but I haven't found any way to fix it yet either, still running tests.
-
I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
"Check online for a solution and close the program"
"Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
Here are some of the Problem Details:
"Problem signature: APPCRASH
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e"I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK -
BlackBerry Desktop will not run: "BlackBerry Desktop has stopped working" / APPCRASH
With no apparent cause, BlackBerry Desktop 6.0.2 will not run on my machine any more; I get the standard Windows error dialog, "BlackBerry Desktop Software has stopped working"; the OS appears to search for a solution, but after 1-2 seconds, the dialog disappears. The full error log:
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: Rim.Desktop.exe
Application Version:6.0.2.44
Application Timestamp: 4db5e0d4
Fault Module Name:KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdbdf
Exception Code: e0434f4d
Exception Offset: 0000b727
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
This is on Win7 Professional. Uninstall/reboot/reinstall does not fix it. Any thoughts?You could try troubleshoot compatibility in Win7.
Please give me Kudos if you feel like I helped you
Thank you
cuse165 -
Firefox has stopped working altogether (Windows 7). It will NOT start. The spinning start up graphic will spin for a moment, and quit. I have uninstalled everything that I could find to uninstall, and then re-installed, but to no avail. I have followed the currently posted suggestions with out success. Any other suggestions?
'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}
Save the file. Then;
Using your file browser, open the Programs folder on your computer.
'''Windows:''' C:\Program Files
C:\Program Files (x86)
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Look for, and rename any Mozilla and Firefox folders by adding '''.old''' to them.
Now run the full installer. -
I just put itunes upeate 11 on and now itunes will not run. I get an error that sys iTunes has stopped and windows is sutting it down. I reinstalled 10.7 and it will not run eather now.
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I have recently downloaded the new itunes. My computer will open itunes but then a screen pops up that says Itunes has stopped working and must close. This happens every time and i can not by pass it. I am afraid all my music is gone as well. I found on my computer that its an incompatible app. What does that mean exactly? Was itunes installed incorrectly? I have had itunes on my computer before and worked just fine and had no problems. Is it possibly a computer issue or Itunes? Need help thanks
Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
ALSO, if you feel like all your music will be gone as well follow through these 2:
> Downloading past purchases from App Store, iBookstore, and iTunes Store
> How to use your iPod to move your music to a new computer
IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS. -
I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!
i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives
Maybe you are looking for
-
Firefox won't let me open unless I run as administrator. How do I fix this?
-
Forms 10g - Oracle 11g DB - Date Format Error - Urgent
Hi All, We are migrating forms 6i to forms 10g.Data Base is 9i to 11g Migration. In 10g forms pre-form trigger ,i have statement :head.yr_st_dt := to_date(sc.get_property('ps.yr_st_dt'),'MON DD YYYY HH:MI:SSPM'); In 6i ,it is working fine,the :head.y
-
GL account not to be valued in year end foreign currency revaluation
Hi I have given payments in USD from my INR bank account. In year end valuation, that account should not be revalued since it is in INR. so i am putting tick in "Only balance in local currency" in FS00. Inspite of the tick, that GL account is revalue
-
I am running Acrobat 8 Professional on a Mac with Snow Leopard. I am trying to reduce a 48 MB pdf (every page is an image). I am getting inconstant results when trying to reduce the file size. I added a few links to some of the pages, then use PDF Op
-
As I re installed OS after formatting, I've lost the registration details of FCS 6 X. Based on serial key(bar code key), can I retrieve my registration details?