Clickbox and Rollover Audio not working

Hey guys...I'm just trying to insert either a clickbox or
rollover area where audio is heard ONLY when someone either clicks
the box or hovers over the area. I wan't multiple areas on the
screen at the same time and I want them to work to the very end of
the slide so that people can just click or hover over areas and
hear the audio for as long as they want to. It seems like that
would be a simple task. As I create it though and record the audio
in both scenarios, when I preview the movie all of the clickbox or
rollover audios simultaneously and automatically start playing. It
doesn't wait for me to click or hover, all of the audio just plays
at once. Why is this? Thanks for your help.

Good morning, Brock
For the Click Box, you need to edit the properties and enable
the feedback captions. Enable the Hint caption if you want to hear
a sound play when hovering the Click Box. Enable the Success
caption if you want the sound to play after clicking the Click Box.
Then you edit the caption and assign audio there.
For mouseovers, add a Rollover Caption or Rollover Image.
This provides two areas on the slide. One is the area you mouse
over, while the other is the area that appears. You then edit the
area that appears and add audio to that area.
Hopefully this helps... Rick

Similar Messages

  • Input and output audio not working and no startup chime

    The audio, both input and output, on my MacBook Pro has stopped working as well as the startup chime. Otherwise the computer starts up and seems to be working normally. Any ideas as to what the problem is and solutions?  

    Hey, my MacBook Pro has been doing the EXACT same thing off and on for a few weeks now.
    I'm just now having time to browse the forums, so I've not even asked about it.
    Yesterday it all started working normally - all sounds.
    I'll follow this discussion for sure.
    There definitely seems to be enough 'Mac-Daddy' Mac Helpers on here to be able to easily resolve this issue.
    i.e.: Andreas!  Just reading her stuff lets me know she REALLY knows what she's talking about & is able to explain the highly advanced info in terms people actually get!
    Thanks for asking that question!
    ~dOiTdiGiTaL~

  • Focusrite Sapphire and Core Audio not working together in Logic 8

    Hello all.
    We're having some trouble with our Logic 8 at work.
    Today we connected a Bose home speaker system to our Mac Pro via USB.
    Once removed and back to our usual output of the Focusrite Sapphire, core audio is malfunctioning within Logic, and the software crashes at the initialising stage.
    To offer details;
    · We normally run our audio through the Focusrite Sapphire
    · Today (the first and last time) we ran the audio through a Bose home system
    · We can run system sound though the Sapphire no problem
    · Core audio works fine in Logic when the Sapphire is disconnected from the Mac
    · The system is an 8 core Mac Pro running Leopard. The software is Logic Studio 8
    · Additional software running is Spectrasonics' Omnisphere and East West's Play
    We tried to view the crash report in Console, alas that is crashing upon start up too.
    Any help would be most appreciated, we're scratching heads and beards.
    I've searched the forum for the past year to see if there has been an identical issue.
    Lou.

    Ahh OK, ( I'm presuming you're using the normal Saffire, not the LE or the pro? )
    go here:
    http://www.focusrite.com/support/software/saffire/
    Download the latest software and install, also within that file there will a firmware updater, run that too.
    Let me know the results.

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work

    My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work.

    thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

  • Audio not working on channel 5 and 7,, okay on all others????

    audio  not working on channel 5 and 7,, okay on all others????

    dalharris wrote:
    audio  not working on channel 5 and 7,, okay on all others????
    Without knowing all of the specifics in your situation, you may want to try these options:
    - If you have a DTA, and your remote control has a LANG button on it, press it. 
    -  If you have an HD or SD full cable box:
    Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
    - The audio settings on your cable box may have accidentally been changed:
    Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
    Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
    Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
    The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
    Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
    1. Press once for English
    2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
    3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
    5. Then press the Exit button (above the Volume button) to resume program viewing
    Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
    - If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

  • Effects and key-frames not working on some clips Premiere CC 2014

    Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
    MSI GT60 Laptop:
    Intel Core i7 4800MQ (2.70GHz)
    16GB Memory 1TB HDD 128GB SSD
    NVIDIA GeForce GTX 880M 8GB
    2880 x 1620 16:9 3K Display
    Windows 8.1 64-Bit

    Here is the exact screenshot.  Now I'm also trying other effects as stated in my original post.  But this effect is just an example.  Is there really something that I'm doing wrong here?  Or am I forgetting something?  Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
    I wish that I could post a video, but I don't know how.
    Please let me know what I need to do to make this work properly.
    TEX

  • Internal speakers and headphones are not working

    I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

    Hi,
    It could be either Hardware or Software related, so try the following and let me know.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My headphones speakers and microphone are not working please help

    hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • Windows 8.1 beats audio not working

    Product name: HP ENVY TouchSmart Sleekbook 4
    after update windows 8.1 beats audio not working
    This question was solved.
    View Solution.

    Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
    Let me know if this helps ...
    DOWNLOAD LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

  • Dv3-4103TX audio not working

    i upgraded my dv3-4103TX which was originally a windows 7 to windows 8 several months ago. One day the audio and the volume keys suddenly stopped working. The keys for audio are not functioning such as play,pause,stop,volume -,+ and etc. i tried troubleshooting and updating but it could not fix the problem. I tried plugging in an earphone but still there is no sound

    It would seem that a Windows update may have disabled the sound.
    Your notebook does not have support for Windows 8.
    There are two ways to approach this. Method 2 is the simpler method.
    1)
    You can try installing the quick launch software for Windows 7 in compatibility mode.
    You can go to the Intel download center to see if the Intel IDT audio driver is available for your notebook.
    2)
    If you can remember more or less when the audio stopped working, then you can use Windows System Restore to attempt to return your notebook's OS to  a restore point dated before the sound issue began. That will return your notebook's OS to the state it was in when the audio worked and the audio keys worked as well.  System Restore will not delete any of your data files (photos, movies, music) so those are safe. . Do not use Windows 8 Refresh to do this. You will use all of your private data with Refresh unless you are using a custom Refresh image.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Brand new HP Beats Special Edition 15-p030nr Notebook PC , Audio not working correctly

    Just bought this computer for me 9/30/14.  Volume is at 100% and while there is some sound, you can barely hear it.  I have checked drivers, device manager etc and nothing seems to change it.  I need to know if this is a defect in the system or if there is something else I can do.  I hate to think we paid all this money for the computer, one reason being the Beats audio, and have it not work.  I will return it if I cannot get it working.

    Hi @Twright2014
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see your having some sound issues with your new notebook. I will be happy to help you with this. How does the audio sound when you use a set of headphones? Try the troubleshooting steps in this HP document No Sound from Speakers which includes using the built-in Windows troubleshooter.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • MBP and motu ultralite NOT working. Firewire.

    Hi, I bought a macbook pro 2.5 with a HD of 200G 7200rpm and I am trying to connect the motu Ultralite. I tried this audio interface in other laptops and desktops (PC) and it does work with no problem.
    I am running Leopard 10.5.2 and the motu does not behaves quite ok.
    Also tried with windows XP with bootcamp, and it does not work at all. It is recognized, but when I open the properties and load the ASIO drivers it says the MOTO has been disconnected and suggests to turn it on again (which obviously is already connected and powered on)
    I read, this can be related to firewire port. Anybody with similar problem?
    Any help or suggestion would be much appreciated.
    Thank you all.

    I've had problems with my MOTU Traveler and OSX ever since purchasing my MBP.
    A factory reset of the audio device has been motu's fix which works for a little while but
    the problem of the device not being recognized always returns.
    I've found that if i unplug then re-insert the firewire cable while the audio device is powered on it
    is sometimes recognized but not always.
    I do not experience this problem when using DAW software which addresses the hardware directly,
    only when using software that relies on the system to address the audio hardware ie; (quicktime, itunes... you get the idea). Works fine on my powerbook G4.
    I've read these issues may be related to apples choice of firewire chipset in the new machines?

Maybe you are looking for