Clicking "Displays" ion system prefernces causes a crash
Just recently noticed this but when I try to access "Displays" through system preferences I get the beachball of death for about a minute and then get a crash report.
This is pretty annoying since I want to change my display preferences!
I've done software update, checked and repaired permissions and no change
any suggestions?
Process: System Preferences [78054]
Path: /Applications/System Preferences.app/Contents/MacOS/System Preferences
Identifier: com.apple.systempreferences
Version: 7.0 (7.0)
Build Info: SystemPrefsApp-1750100~6
Code Type: X86-64 (Native)
Parent Process: launchd [291]
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Download and install the 10.6.7 COMBO update, repair permissions, and restart.
Similar Messages
-
We continue to experience occasional MacOS 10.5.6 data volume instabilities. Just today, the system reported that it could not repair a purely archival data volume at a time when I was not accessing the volume and had not asked the OS to 'repair' it.
Then when manually running a repair on that same data volume in Disk Utility, storage services caused a kernel panic crash.
This problem was more prevalent when I tried the server version of Mac OS 10.5.6, where the OS caused disk volume corruption on the dedicated TimeMachine backup drive, and then started to crash frequently in the face of that self-induced corruption.
There was no disk volume corruption and no crashes before 10.5.6.
I would like to know why there should never be a file system condition on data volumes that would induce the entire OS to crash. I would completely understand a forced dismount of the corrupted volumes perhaps, or continuing in a read-only mode until the impacted volume could be repaird, BUT NOT AN OS CRASH. Even attempting to use the repair function on the unmounted volume would cause a crash.
The reason I know this is a file system bug and not the hardware is that the same system can endlessly zero out the data on the same drives, copy large test files to & from the drives, etc. The only situation where these file system crashes happen is with high file counts as one would encounter on a backup drive or on a data archive drive.This evening OS 10.5.6 reported that Time Machine could not write to its target backup volume on one of the new 1.5TB drives...the nightmare cycle of
1. OS 10.5.6 causes volume corruption
2. OS 10.5.6 unable to repair volume corruption, crashing instead
3. OS 10.5.6 crashes over and over as it tries to auto-mount the volume
4. hard drive has to be physically ejected and wiped using a WINDOWS system so that it can be used again!
This is a sickening tale of disk corruption woe that started with the OS 10.5.6 update.
As fast as I opened an AppleCare support case on this issue, they were closing it behind my back without resolving the issue.
The kernel panics related to the volume mount problem are simply outragrous:
"jnl: mod block start: buffsize 512 not a multiple of block size 4096\n"
KERNEL PANICS SHOULD NEVER HAPPEN DUE TO A VOLUME MOUNT ERROR---EVER.
And yet I see in the support database that this is a recurring theme that has been seen in other OS storage situations, including Xserve storage where the bug would cause much more business damage.
I want this fixed NOW. -
Help / System Info causes PSE 11 to Crash
When I select Help, then System Info, PSE 11 crashes with a "Elements 11 organizer has stopped working".
Any suggestions?There is no import option in Full Screen. You need to be in Windowed mode to import.
Regards
TD -
Sticky Notes in a pdf file cause ie7 crashed.
This is a very interesting bug.
System version: Windows XP with SP3
Adobe Reader Version: 9
IE version: IE 7
Files needed for testing:
a pdf file (note.pdf) with Sticky Note displayed.
a html file (note.html) which has a url link to note.pdf
Action which causes the crash:
1. Open note.html in a new IE window
2. Click the link to open the note.pdf in a new window or a new tab, then close it
3. Click AGAIN the link to open the note.pdf in a new window or a new tab, then close it
Then you could see the error window popup, the ie7 browser crashed. This has been tested in 3 PCs.
Check the Error Event, it said:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Description:
Faulting application iexplore.exe, version 7.0.6000.16850, faulting module msvcr80.dll, version 8.0.50727.3053, fault address 0x0001e898.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 78656920 726f6c70 78652e65
0020: 2e372065 30362e30 312e3030 30353836
0030: 206e6920 6376736d 2e303872 206c6c64
0040: 2e302e38 32373035 30332e37 61203335
0050: 666f2074 74657366 30303020 39386531
0060: 0a0d38
The bug doesn’t happen to IE 6 and FixfoxTry Goodreader in the App Store. It should do the job for you.
-
my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.
That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.
-
hi guys,
In my app i am using a ad control.It works fine in windows phone 7 .But in windows phone 8 it causes crash my app.I used a ad_errorOccured event and there it says capabilities missing(ID_CAP_MEDIAIB).But I have checked all the capabilities in windows phone
8.All have been checked in WMAppmanifest file.
System.Diagnostics.Debug.WriteLine("ad error " + e.Error.Message.ToString());
message---e.Error.Message = "Required capabilities are missing from manifest (WMAppManifest.xml): ID_CAP_MEDIALIB."
where as all media capacity has been enabled,dont know what is causing my crash app........
pls help
dj_FoxHello,
You should ask in the
Windows Phone Development forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Whenever I click the project button, iMovie 09 just crashes.
I should have waited for 8.001 or something. Everytime I click on the project button iMovie just crashes. This happens 100% of the time so I can't use it. Hopefully Apple will update this soon. I learned a valuable lesson. When iMovie 08 came out I waited 60 days before I upgraded. Help. Cheers, Mitch
I had some early problems with Live View in CS6 which were caused by pages that contained links to an external script (i.e. Facebook badge or ADD THIS widget). It didn't happen with NEWLY created pages.
Try this:
Go to View > un-tick Display External Files.
Go to View > Live View Options > Disable JavaScript.
Hope this helps,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
How to identify cause of crashes in Console
Hi. My MacBook Pro has locked up several times in the last few days. Is there a way I can look in Console (or somewhere else) to identify the cause of each crash?
I am not very familiar with Console. There is a CrashReporter file in Console, but it is empty. When I peruse the "All Messages" listing, it is mostly a bunch of gibberish to me. Any ideas what specifically to look, for example, for after I have performed a Force Quit on an application?
Thank youGo to developer.apple.com and register for a free membership. Then you can search for document number TN2123 that documents the CrashReporter. I'm afraid, however, that it won't be of much help. It's intended to be used in conjunction with a debugger to trace a problem in a program. Rarely will one see anything in a crash report that will prove helpful.
However, the console log can tell you what caused a lockup or at least what the last thing was that logged an entry before the lockup. You can also provide a more complete description of what exactly was going on when the machine locked up along with any additional information such as error messages. The CrashReporter will at least tell you what process crashed and the timestamp. Then use the timestamp to investigate what's entered in the console log.
Frequent crashes (not kernel panics) of programs that have not normally exhibited a problem may be caused by corrupted preference files or cache files. They can also be caused by font problems - corrupted fonts or duplicate fonts. If you've added fonts to your system then you might check that.
If specific applications are causing the crash and you've already tossed their preference files and any associated cache files but they are still acting up, then consider uninstalling them and then reinstalling. Be sure to fully uninstall the application:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.
It also doesn't hurt to repair your hard drive and permissions:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Message was edited by: Kappy -
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan -
Using Disk Warrior on external drive causes MacBook crash
I work on MacBook System 10.6.7, I back up to LaCie external drive, which I partitioned so that one partition is only for backup, the other is bootable. On this partition I have a clone of Disk Warrior (4.1), to use on the MacBook .
Today I ran DW from the MacBook on the external drive for the first time, because lately it happens that the backup partition does not always appear in the finder (still performs back up though). I applied it first to the boot-partition, and it told me there were some problems. When it got to replacing the directory, the computer crashed mid way.
I performed Disk Verify on that partition through Disk Utility, and it said that it needed repair, and then that it did repair it. Checked other partition, no problem.
Tried again to rebuild directory for the external drive, and both partitions caused the MacBook to crash. I then booted from the external drive to see if it works, and ran DW on the MacBook, and had no problem there.
Anybody can tell me if it is the MacBook that caused the crash, or if the problem is with the external, and if there is anything else I can try to sort it out?
thanks,I work on MacBook System 10.6.7, I back up to LaCie external drive, which I partitioned so that one partition is only for backup, the other is bootable. On this partition I have a clone of Disk Warrior (4.1), to use on the MacBook .
Today I ran DW from the MacBook on the external drive for the first time, because lately it happens that the backup partition does not always appear in the finder (still performs back up though). I applied it first to the boot-partition, and it told me there were some problems. When it got to replacing the directory, the computer crashed mid way.
I performed Disk Verify on that partition through Disk Utility, and it said that it needed repair, and then that it did repair it. Checked other partition, no problem.
Tried again to rebuild directory for the external drive, and both partitions caused the MacBook to crash. I then booted from the external drive to see if it works, and ran DW on the MacBook, and had no problem there.
Anybody can tell me if it is the MacBook that caused the crash, or if the problem is with the external, and if there is anything else I can try to sort it out?
thanks, -
I have a client with a Mid-2010 MacBook Pro. He was having crashes with Lion so I upgraded him to Mountain Lion 10.8.2. The crashes did not go away.
I troubleshooted and with the help of gfxCardStatus noticed that every time his machine went to use the discrete graphcis he got the gray hard crash screen and system had to restart. Back then I tried a beta of 10.8.3 and it didn't help.
I noticed that if I created another user account (profile) it would not crash when the discrete graphics card was called upon.
So, I re-installed the OS (to 10.8.2), created a new profile and manually migrated pictures, documents, keychain, mail, movies, music and re-installed the relevant Applications. Everything was working fine and my client went on a trip to Europe and soon the crashes began again. Then he upgraded to 10.8.3 and the crashes got even more frequent (it seems 10.8.3 puts more applications on the discrete graphics list so it switches even more).
I am wondering what could have caused the crashes to begin. It was before he upgraded to 10.8.3. Some application or something he was using must have changed a setting or corrupted something to cause the crashing to begin. I haven't done this yet, but I'm sure if I create another user account it won't crash on it.
Any ideas where to turn my attention to see what is causing the shift from his working user account to a crash-causing one?
He has iLife, Office 2011, Final Cut Pro X, iPhoto Library Manager, VLC, Audacity, DropBox, FileMaker Pro 11, Flip4Mac Player, Fuze, GotoAssist, Handbrake, Skype, iSkySoft DVD Creator, iSkySoft Video Convertor, Onyx and Skype.
I know there are *MANY* others having problems with the automatic graphics card switching and it seems some are having more problems when gfxCardStatus is installed?
- Elanis this your MacBook:
TS4088- MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Take a copy of the article with you when you go for service. They need to run a SPECIAL diagnostic to decide whether you have this problem. Do not leave until they run the special diagnostic. The "overnight run" does not detect this problem.
If they confirm you have the problem, they will replace the graphics chip, which is part of the motherboard. be prepared to hand over your Mac for depot repair. (Your backups must be up-to-date). -
Is there a way to track down the cause of crashes in SAFARI?
Not long ago I was able to eliminate one type of crash I had been having in SAFARI by following a suggestion made in this forum. Those crashes, however, were of the type that generated a 'crash report.' So they left a kind of 'paper trail' as to what was causing them.
More recently I have been having frequent crashes that don't result in such reports. These crashes occur apparently randomly when I mouseclick on a link. The spinning beach ball appears on-screen and never leaves.
Is there a way to find out exactly what is causing these crashes?
Thanks.Hello Michael:
I have not yet seen a
good approach to using that information (short of
deleting the account).
better search some yourself Barry <G>
if something runs fine in another account - one can isolate the cause to one of the plist files in the main acct Home/Library/Preferences/ or possibly an add-on in Home/Library/Internet Pug-Ins or ...Input Managers for example.
If there is the same problem in the new acct - you can discount anything with the main acct user library - plists,caches,plugins,input managers, the whole lot.
A useful tool is Console - found in Applications/Utilities/ keep it running while the 'problem' in question crops up & see if any messages pop up in either the system log or console log. Sometimes these will point straight at the problem area, other times no help at all. -
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
System Prefs Users&Groups crash on unlock
Hi there, my Mac pro 2,1 running 10.7.5 has a few issues. One of them is that the System prefs Users&Groups crashes on unlocking the padlock. After I entered the password (I'm the admin) System Prefs crash. I have no problems accessing the other system prefs and unlocking them. Any ideas on how to fix this? Thanks!
Wow! Solved it. Still not sure what caused it but reading upon other threads I did a test changing the user icon and booted in safe mode. No problems in safe mode and after booting in normal mode I could unlock Users&Groups again. It also solved an issue where the Dock would crash upon contextual menu and iTunes that would crash on launch but would work after relaunch. I've had this iTunes problem for months, even after upgrading to iTunes 11.
Maybe you are looking for
-
Hey when ever i download and install Itunes then i open it says error finding folder please re download and I tried a tons of times and it didnt work. Does anyone know how to fix this?
-
we have created two 90+ pages doc on our g5 twin - panther - and when we open them on the g4 powerbooks - tiger - many of the images are gone or corrupted. How can we prevent this from happening? Thank you. g4 powerbooks and g5 twin Mac OS X (10.4.7)
-
pretty much what the title said I went to Update my I phone (4) and It was updating then said it could not finish the update left my phone on the black apple after 40 mins went to recovery mode .. it said restore it but everytime I try it said
-
EJB3 : suspend JTA transaction does not release the connection in the XA DS
Hi all, I did a test and after suspending a JTA transaction I note that in the xa datasource the activeconnection = 1. So is it normal because I was thinking that when I suspend the transaction the teh connection is released and then after a transact
-
How to make lightroom 5 default instead of old version 3
How do you make LIGHTROOM 5 default instead of old version 3?