Clicking in iTunes
Sometimes when I transfer a song as an MP3 from Logic Express or Garage Band to iTunes it seems to overload or cause "clicks" when played back using itunes on my computer speakers. (Even at low volume with no EQing on iTunes) I also hear these clicks when downloaded to my iPod played through my car speakers. These exact same files burnt to disk from iTunes sound great played on my car Cd player. When I play pre-recorded songs on iTunes through my computer speakers I get more volume and no clicks! When i record I'm very careful that the channels aren't clipping during the recording process or mix down process however i still often get a "click" during playback when transfered to iTunes. Almost sounds like a cymbal hit is causing the click. Any advice is welcome!
iTunes is happy to play AIFFs or WAVs, & you don't have to 'move' them into iTunes. Dropping them on iTunes will either leave them where they are, or make a copy of them in your iTunes Library (depending on how you have set your iTunes advanced preferences). Either way, they will now be 'in iTunes'.
You can (obviously) also put AIFFs/WAVs on Audio CD or on an iPod. So you can leave out the MP3 conversions altogether.
Check the AIFF/WAV versions in QuickTime as well as iTunes. You don't really need to involve iTunes for these tests. Is the problem there in these files?
If so, then either your Bounce method is to blame, or the source Audio files, or your set-up in Logic.
Similar Messages
-
I click on itunes but doesnt open and says send error report or dont send
i click on itunes but doesnt open and says send error report or dont send
You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?
-
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
My iTunes won't update on my computer. I have windows vista. I can open up itunes and when I click on "check for updates" it asks if I want to download iTunes version 11.1.5 and I click "Download iTunes" but then nothing happens. Sometimes uptop the loading bar will appear but for only a split second. I have tried restarting, shutting down, I cannot figure out why it won't download. What's happening and how do I fix it?
Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
When i click on itunes icon it won't open. it says it has quit unexpectedly?
When I click on itunes it says that its quit unexpectedly! It won't open it!!
Repaired permissions on your computer with Disk Utility?
-
I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!
Hi Applefan 6968,
If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
- Brenden -
I have not been able to access the itunes store for the past month, it has been a long time since I have downloaded/purchased anything, probably around christmas time, but the problem is I click on the itunes store and the grey zebra striped bar just keeps running accross the top indefinitely, one other thing is that when I click on my itunes icon on the left side of my screen a window pops up and tells me to turn off compatibility, so I tried to follow the prompts through the properties from right clicking the itunes icon but after the thing runs its check and i click on make suggested changes, it still says incompatible. I have no idea what to do and this is extremely frustrating, please help!!
Refer to this artile:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489
For Windows 7, make sure all boxes in Compatibility tab are unchecked. -
I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.
What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)
-
when i plug my iphone or ipod in they do not show up, when i click on itunes store it says unkown error -3212
someone please help me i tried just about everythingMacafee security center is may be the culprit.
Open Macafee then: select;
Internet & Network > configure
Firewall > Advanced
Programm Permissions > scroll down to Itunes
Highlight (click on)
Then Grant full access to Itunes.
APPLY then OK
When you select store from Itunes you will need to register with Itunes.
Try that or:
Disable your firewall.
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question" -
Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you
Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
Also see:
iTunes Store: Associating a device or computer to your Apple ID
since you may have started the 90 day window.
For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing. -
HHHHHEEEEEEEEEELLLLLLLPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!i just bought a new computer and when i click on itunes it says i need to install ASL.dll, but i'm scared if i do or re-install itunes i will lose all the music i have bought from itunes, what do i do?
Welcome to the Apple Support Communities
The music is stored on the iTunes library. This library isn't deleted when you uninstall or reinstall iTunes, so you will keep everything. Anyway, it's better to make a backup of the library. Apart from that, you can download the purchased music as many times as you want -
itunes tod me i needed to re-install it, so i did but everytime i click on itunes on my desktop it comes up with "the file itunes litbrary.itl cannot be read because it was created by a newer version of itunes" what do i do now?
If you've already installed the latest version then the message may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2 -
When my iTunes offers to download the 10.6.3 software, I click "Download iTunes" and it still doesn't download. What do I do?
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple website:
http://www.apple.com/itunes/download/
Does that go through any better for you? -
2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod.
http://support.apple.com/kb/ts1567
-
I have iTunes 11.1.3 and when I click on iTunes Store in the top right corner I just get a blank screen. Please help me! I want to buy music!
Hi, iTunes Store Help 12.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with the iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
Fix? Clicking on iTunes makes hidden application appear (usually Adobe Bridge)
Here's what happens: iTunes is playing in the background while I'm working in some application... say, Photoshop. To keep things tidied up, I have other open applications hidden. But if I click on iTunes in the dock to give it focus, or click on the iTunes mini-player (which is set to Always On Top), an unrelated hidden application (usually Adobe Bridge) comes out of Hide mode and takes the vocus. It happens for a while, then stops. I haven't found a pattern.
This bizarre issue has been happening for a long time, through a number of iTunes versions, including the current one.
Any reason why? Any fix?
I'm still using Snow Leaopard, which is a requirement for a while longer.
Thanks!You can try running the combo update.
10.9.5 Combo Update
Maybe you are looking for
-
Using Case when statement in catalog doesnt result in the correct sql
I am running into an issue on my current project wherein, I am not able to see the correct formula in the physical query as I am seeing it in the logical query: Logical query: SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/Email/SFDC_InitRe
-
FI Business Flow related to BW/ BI
Hi SDN, I need some information regarding the FI Business Flow related to BW/ BI. Any case studies or scenarios would be highly appreciated. Thanks in Anticipation, Ankit
-
SAPSCRIPT for Intrastat.
Hi all experts! I have a question concerning sapscript and Intrastat. First some background information: Country's inside EU have to inform to the locally central Statistic bureau. This information can be printed out from SAP. For my case we have to
-
Hdmi to thunderbolt for camera input??
We have a mid-2011 17" Macbook Pro and have a Panasonic HMC150 camera that we need to input for a Webex conference. The camera is HDMI out. Does anyone know if an HDMI to Thunderbolt adapter will allow the Macbook to recognize the camera? Or is th
-
Hi, I created a table and inserted some records into the table. I am trying to find the output using decode function using the below query. select marks,decode(marks,(marks>70),'A',(marks>60 and marks<70),'B',(marks>50 and marks<60),'C') from stud_mr