Clicking Noise from hard drive_U410

Hi,
I hear regular clicking noise from the new Lenovo u410 (windows 8) hard drive.
How can I fix this?

weizhou12 wrote:
HI,
I hear constant noticeable noise from hear drive_U410. I have this Ultrabook for almost 2 years. Is it still under warrenty? Any suggestions to fix the noise?
Thanks!!
The noise you are hearing might just be the normal sound of the hard drive. Most hard drives aren't 100% quiet. The link below is for a Seagate article on hard drive noises for your reference......
http://knowledge.seagate.com/articles/en_US/FAQ/174571en?language=en_US
Are you experiencing any errors or problems with the hard drive ? Seagate also offers a free SeaTools utility that can be used to check the health of your hard drive. You can download that free tool at the link below.....
http://www.seagate.com/support/downloads/seatools/
As for warranty, the hard drive would be covered under your computer's warranty and that would have expired after 1 year.
As for fixing the noise, the only way to fix the noise would be to replace the hard drive with a new one. Then again the noise you are hearing maybe just the normal sounds of the drive.
As with any hard drive it is always a good idea to have a back up of your important files on another media. Hard drives have been known to fail without notice.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Similar Messages

Clicking noise from hard disk

Hello forum,
one more hard disk noise problem. My new MPB arrived two days ago and I immediately noticed a clicking noise that is presumably emitted by the hard disk. I've got the basic 250GB model, so it's unrelated to the 500GB noise. The sound occurs quite regularly every 20sec or so, but only when the disk is inactive. The system doesn't freeze. The noise appears regardless whether the disk power saving feature is enabled or not. Here is an amplified version of the sound without the normal background noise (fan, hard disk):
http://www.filefactory.com/file/ah25f1h/n/ClickingNoise_wav
I've learned that clicking noises are a certain sign of hard disk failure. So should I return it immediately and ask for a replacement?
Regards

MKG4 wrote:
It sounds like you've got two clicking noises happening back to back, correct? I have the new 250GB drive as well (5400 RPM) and I'm hearing a periodic click similar to the second one in your clip.
I can hear only the second click, too. Only if I mute the background noise and amplify my recording, I hear the first one. Could you perhaps take a record of the sound that your MBP makes so that we can compare the sounds?
Haven't noticed any other problems with the drive, though. Is yours a Fujitsu? Mine is, and according to their web site, "if the drive is idle it will automatically move the heads periodically to prevent lubricant migration." I'm wondering if that's what the noise is.
Interesting. Mine is a Fujitsu, too, and perhaps the two noises come from the disk head starting and parking.
Actually, it sounds a lot like the 500GB noise, except without the beep. I've seen very few, if any, issues with the 250GB drive, but I'm holding out hope that a fix may come along at some point.
I agree. Currently the sound doesn't seem to be harmful, but one never knows.

Clicking noises from hard drive

I have just bought an new mac mini and the hard drive is making random soft clicking noises. Should this concern me?

Check (Verify) the disc with utility disc.
If you have doubts let an Apple Store check it and remember you can replace it without questions before 14 days after purchase.

Strange clicking noise from hard drive

My drive just started making this noise in my MBP today. Never heard this before. My drive has always been very quiet. Now ever couple to few seconds I'm hearing this click-like noise. No performance issues yet but I work on computers for a living and noises like this are not good. I'm almost certain my drive needs to be replaced and I don't want to wait until it fails. That is not an option.
Anybody have this problem and have their drive replaced to fix the problem?
BTW, mine is also the Fujitsu 120 GB drive.

Sounds like an issue i had with 2 other drives in my old comp.
Bad blocks/sectors turned out to be the problem then.
Fix: backup all your data, boot up from the OSX dvd and open Disc Utility.
- Select the "Erase" tab and click the "security options" button below.
- Select the 2nd option "zero out data" then go ahead and erase.
This will mark all bad blocks on your drive and tells the OS not to use those sections of your drive. Once finished, if this turned out to be the problem, the drive won't make those noises anymore.
Some people say once a drive failed due to bad blocks it becomes less reliable, some say this is not the case... I leave it up to you if you still trust this HD after (if) this has been fixed.
Before doing this i suggest running maintenance apps like DiskWarrior and TechTook Pro to see if other problems might be the cause.
Btw, the zero data procedure takes quite some time with large drives, you might want to go grab some lunch and a movie while you do this

Noise from hard disk

Hi, everyone.
I bought a new mackbook pro in this Jan. Recently, I hear some not continuously noise from hard disk, especially when i open a file in hard disk or verify the hard disk. Is something wrong with my hard disk?
Thanks

This hard disk clicking is a know problem for many laptops. If you search it on Google, you will find a lot of discussions about it in the Unbuntu Linux forums. In most cases, it is due to the Advanced Power Management (APM) feature of notebook hard drives. The default APM settings of these drives are aggressive so as to extend notebook battery life. As a consequence, the HD tries to park its actuator head to the ramp whenever it judges the system as idle. However, OS X or some third-party applications may access the hard disk quite often, resulting in a park/unpark cycle every few seconds.
Every of these cycles is counted as one load/unload cycle. Most notebook drives support up to 600,000 load/unload cycles. If a hard drive parks its head every few seconds, it may shorten its life by "using up" the cycles more quickly.
I had the same problem on my Powerbook with a Hitachi Travelstar 5K160 80GB PATA drive. I heard the frequent clicking sound right after I installed it into the laptop. The SMART status appeared to be Verified, and there was no problem with the drive itself. After searching on Google and Hitachi web site, I found the causes and solved the problem using the Hitachi Feature Tool. For other HD brands, I have no experience at all.
Basically, Travelstar 5K160 drives have three idle modes, from which a user can set one as the deepest idle state:
1) Active Idle: the actuator head is parked near the center of the disk, and power usage is 45-55% less than performance level. Recovery time to active mode is about 20ms.
2) Low Power Idle: this is usually the factory default idle mode. The head is UNLOADED to the ramp and the power consumption is 60-65% less than the performance level. Recovery time is about 300ms.
3) Low RPM idle: in this idle mode, the hard disk will spin down to a lower RPM speed. More power is saved but recovery time is much longer. (I can hear the disk spin down and spin up again a few times per minute. There is also a lag in system reaction time.)
To get rid of the hard disk clicking, you need to set Active Idle as the deepest APM idle mode. To do it on a Hitachi hard disk, you need Hitachi Feature Tool, and a Windows laptop with the same HD interface as your drive (PATA or SATA). Sadly, the feature tool is only for Windows and Linux.
You can download Hitachi Feature Tool 2.10 as an ISO image here: http://www.hitachigst.com/hdd/support/download.htm#FeatureTool and burn it into a bootable CD. The userguide of the tool is available on the same page.
Then, take out your hard drive from your Macbook and install it into a Windows laptop. Boot the machine using the Feature Tool bootable CD. Choose "Change Advanced Power Mode" from the drop-down menu.
The default value is 128 (Low Power Idle). Just increase the value toward Performance, until you see the APM mode over the value bar becomes Active Idle (starting from 192). Click OK and Exit the feature tool. Switch off the Windows laptop and take out the hard disk. Install it into your Macbook. You will not hear the clicking sound again when system is idle. The lowest APM mode will be Active Idle and hence the drive will not park its head to the ramp during operions.
If your hard drive is a Hitachi Travelstar 5K160, you can find the 5K160 specifications version 1.1 from Hitachi web site. On page 69 of the document, it explains the APM idle modes. On page 145 about the register values of the APM modes.
To set Active Idle as the deepest idle mode may adversely affect battery life. (I haven't yet tested it myself) However, there seem not to be a big difference than the Low Power Idle, according to the datasheet of 5K160. For this model, power consumption of Active Idle is 0.8W, while that of Low Power Idle is 0.6W, on average.
Hope this is helpful.

Question Mark clicking noise from internal seagate HDD

this morning, my six months old MacBook black (2.16Ghz) screen froze. After force to reboot, my MacBook will not boot anymore while hearing a repeated clicking noise from the hard drive.
I tried Disk Utilities from Original Install Disk but the internal HDD is not recognized.
Then run the Apple Hardware Test, 01 Error found with these code; 4SNS/1/40000000:TB0T.
I don't know what that means.
Boot up MB from Data Rescue II boot CD, still the internal HDD cannot be found.
I know that the internal HDD is not completely dead because I still hear a repeated clicking noise from the hard drive. Is there any ways to recover data from the drive?
Someone suggested me to create "image" out of the hdd by using "dd" command under Terminal.
Would it be possible?
I have Apple OEM (Seagate) *ST9160821AS Momentus 5400.3 160gb.*
Any suggestions? Thanks!

I've had my share of hard drive failures, and that repeated clicking sound is a telltale sign. Yours is not the infamous Firmware 7.01 drive which were all of the Seagate Momentus 5400.2 series. Sounds like a simple random crash. Unfortunately, these things happen.
You might be able to recover it yourself. If you can't, any repeated efforts to do it yourself could reduce your chances of recovering data if there's something like a failed head.
If your data is that valuable, you might want to bring it to a data recovery service. Most will give an estimate and only charge if they can recover data. Their services will typically be very expensive - around the cost of a new MacBook.

Clicking noise from back-ups

Since replacing my G5 with a new mac mini I hear frequent clicking noises from the APC Back-UPS that I have it plugged into. The only obvious difference is that the mini has an ungrounded two-prong plug while the G5 had a grounded three-prong plug. The clicking noise consists of two clicks in succession, the second one slightly lower in pitch. This occurs at random intervals but also in response to anything that I'm doing on the computer such as opening or closing an application, resizing a window, visiting or exiting a website, etc. Occassionally it will happen when the computer is asleep in which case I will hear the fan running briefly in the mini although the monitor doesn't wake up. When this happens I will often see the internet activity monitor light flashing on my dsl modem. I don't know if these noises are a sign that something isn't working properly or just an annoyance. In either case I would welcome suggestions on how to stop it as well as any ideas as to what might be causing it. The APC unit provides battery back-up power in the case of a power outage and surge protection. I submitted my question to APC support but got no response. I also talked to someone at AppleCare and he had no idea what was causing this and wasn't even sure if he knew what I was asking about. However lots of people use back-ups units so someone out there must have experienced this phenomena besides me.

I checked that box but wasn't around the sleeping computer long enough to tell if it made a difference. I plugged in a lamp with a dimmer and turned it up and down with no effect. Then I had an idea. I'm going to wait a couple of days before marking this as definitely solved, but here's what happened:
The UPS has three outlets marked "controlled by master." Anything plugged into these gets it's power turned off when the computer is sleeping. I had long ago moved the peripherals to the other outlets because I didn't like having my computer and monitor wake up whenever I turned on the printer just to use the copy function. Near the power button on the UPS is another smaller button with a graphic symbol. If you hold this down for a few seconds it turns off the "master enable" function. After I did this the clicking stopped.
This still leaves some unanswered (though no longer important) questions: Why was this an issue with the mini but not with the G5? Why was I getting clicking noises in response to doing things on the computer even with the usb connection to the UPS disconnected? Why was I also getting them even when the computer was asleep? One possible factor is the usb hub. The old one was on a pci card, while the new one is external with a power cord connected to the UPS. Another factor may be the ungrounded power plug on the mini vs. the grounded one on the G5. At any rate it looks like the problem is solved, at least for now.

Equium A100-147 - Clicking noises from the HDD

For a while I have had clicking noises from the HDD and when the laptop failed I assumed the drive had packed up but when trying a replacement nothing happens. I get a blue light for battery and a (faint) blue light for DC supply but nothing for power or disk. However, when I connected an external drive yesterday it booted fine and when I disconnected it the laptop continued working from the internal drive. But again this morning it is dead and cannot boot. I have read that the BIOS can stop recognising the drive or maybe the settings are not being saved when it is turned off. Could it be the motherboard battery ?

If I understand you right your notebook is death now, right?
I really don't know what to do. Remove the battery and HDD and try to start notebook. if the same happen again it is time for new notebook.
I don't think repair is best option because it can be pretty expensive. Satellite A100 is pretty old notebook and you can sell it on eBay. Someone will need it for replacement parts.
Maybe my opinion sounds stupid but I don't know if you have time to search for new parts. I cannot say for sure but there must be some serious problem when you cannot even enter BIOS settings or see anything on the screen.

My MacBook Pro 13 inch makes a clicking noise from the hard drive and can not start up in safe mode and normal. I then ran disk utility in recovery mode and disk utility shows no problems with the hard drive. What is the problem?

Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?

Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods

Macbook Pro 2010 Running Slow and Pulse/Click Noise (Not Hard Drive)

Hello. My 13" Macbook Pro mid-2010 (7,1) suddenly began running slow and lagging on certain operations. There is also a light pulse/click noise coming from the center of the keyboard. I am sure this is not a failing hard drive. How, you may ask me, am I so sure??? Well, I originally thought it was a failing hard drive and so replaced the hard drive, and there was absolutely no change, and the lagging and noise still continues. This makes it very frustrating to do basic, low-memory-intensive things like browse on Safari or watch a movie.
I have upgraded to Mavericks, and have 8gb Ram. This problem started suddenly about a month after upgrading to Mavericks. In fact right now my computer is lagging just typing this, Activity Monitor says I am only using 2.75 ram of 8gb.
Steps I have taken with no resolution
-Replaced the hard drive
-Reinstalled OSX Mavericks
-Verified and Repaired Permissions (I still get a message the the following item can't be repaired "System/Library/CoreServices/RemoteManagement/ARDAgent". But I have read that this is a common thing and can be ignored.
-Restarted the computer holding down left shift-option-control and the power key for 10 seconds (not sure exactly what this resets, but some type of system cache thing.
-Reset the PVRAM stuff ( I restarted the computer holding down command-p-r. I'm not sure I did this correctly as it went to the firmware disk repair screen.
Could there be a RAM issue? Does RAM start making noise when it goes bad? I bought my upgraded ram from ebay, it isn't the official Apple Store stuff. Could replacing the ram possibly help? My System Report tells me the RAM is OK.
Putting a message on here for help is the last step before giving up. I can't do much with this computer because it is hiccupy and overall difficult.
Thanks.

1. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.
Remove CleanMyMac.
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Remove Conduit:
http://www.thesafemac.com/arg-conduit/

Clicking sound from hard drive - Satellite U940-100

Hi people,
I bought a new laptop just 5 days back and I am hearing a clicking sound a few seconds apart. Here's what it sounds like: [https://soundcloud.com/user506186265/toshiba-u940-clicking-sound]
Can anyone help me diagnose the sound, what is it and why is it happening?
This happens every hour or so and is disturbing in a quiet environment. Since I plan to keep the laptop for more than a few years I fear the hard drive will fail very soon. If I cannot resolve this suitably before Nov 20, 2013 I plan to return the laptop to where I bought it.
Thanks for your help!

This clicking noise comes definitely from the HDD and this sound is produced by reading heads. On some models it is pretty quiet but on some models you can hear it clearly.
In front of me I have U940-103 model and I don't hear such clicking noise, just normal HDD noise and it is not so disturbing for me.
As far as I know you cannot control it somehow. Maybe you can disable some settings like automatic update, back-up or HDD scan to avoid such activity.

Clicking noise from back left of MBP -- speaker maybe?

Hi all,
I have a clicking noise coming from the back left of my MBP and I'm wondering if anyone else has this problem, has any suggestions, or knows if it is potentially bad.
I saw the long thread about a 'pop' noise here:
http://discussions.apple.com/thread.jspa?threadID=1234166&tstart=0
... but I'm not 100% sure mine is related.
I looked at some MBP take apart guides and see that the hard drive is in the front left, but my click seems to be coming from the back left (if I put my ear on the front left I can hear the hard drive spinning and all, but the click doesn't seem to come from it). I tried the hdapm suggestion in that thread just for kicks, but nothing happened, so overall I don't think it's the hard drive.
The only moving part in the back left as far as I can tell is the left fan, but I checked the fan speed with smcFanControl, and they were both at 2k (normal speeds). Plus, it doesn't sound like something I would expect a fan to make, but I could be wrong. The click happens in bursts usually, clicking about once every 5 seconds (it seems pretty consistent) for a while, but then has long periods without clicking. It doesn't seem to click more or less depending on computer usage. I would think that if it were a fan noise, it would click a lot more often (every 1/2000 seconds! ;>), and I don't see why it would come in and out in?
I'm wondering if it might be a periodic pop from the speaker. It happens when the volume is down & muted, though, so that seems somewhat odd. If it is the speaker, I don't think it has anything to do with interference, as it will make the noise when the computer is on battery power, with nothing plugged in, far from any electronics.
Overall, I'm pretty confused, so any advice would be great. At the moment, taking it into an Apple Store won't really work for me :/ I used to have a PowerBook & a G5, but I sold both of them when I bought my MBP, and this is my only computer. I have a NAS that I've backed up all my data to -- so I'm not really concerned about losing stuff if something dies -- but I need my MBP for work, so I can't live without it for a week or so if they need to hold onto it. Does anyone have any ideas about what might be happening?
Thanks!
-Tyler

Welcome to Apple Discussions!
I didn't read all of that long thread, but I have heard of the type of noise you describe being associated with the hard drive. Whether it's benign or ominous or something else entirely is hard to say. But there are a couple of little utilities that can help you evaluate your hard drive:
S.M.A.R.T. Reporter:
http://www.corecode.at/smartreporter/
S.M.A.R.T. Utility:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
The former will monitor the S.M.A.R.T. status of your hard drive and install a beautiful icon in your menu bar. The icon will be green if the S.M.A.R.T. status is verified and red if it is failing. It is designed to give you a heads up if it detects hard drive problems.
S.M.A.R.T. Utility is not supported on all hard drives, but if it is, it will allow you to see various factors which determine the S.M.A.R.T. status and if there are problems with any of them. This can also give you early warning of hard drive failure.
Also, there have been some problems with one model of Seagate drive, so check and see if you have a Seagate.
My Fujitsu drive is absolutely silent, and that is what you should expect. My external La Cie makes clicking noises every so often, and always has, so I think that is normal for it.
The main thing to worry about is the hard drive.
Do you have the widget iStatPro? It might be better for monitoring the fan speed without using smc fan control. But if the left fan is at 2000 RPM, then I would expect a very rapid click, which does not sound like it's the case here.
One last thing--does the click vary with the volume? Does it get louder if the volume is turned up high and quieter if the volume is turned down low? If the click has to do with the speaker, then I might expect the click to be louder or quieter depending on how the speaker volume is set.
It may be worth taking it to the Apple Store just to let someone listen to it and give an opinion. If you are under warranty, at least get a case number to document the problem. I understand that you can't be without your Mac for a week or so, but if a problem is diagnosed that does need to be fixed, then you can work on getting the work scheduled for a time that is convenient to you. It may even be possible to arrange for a loaner with all your stuff cloned onto it. Knowledge is power, and will give you better options than, say, having a sudden hard drive crash.
Good luck!

Clicking Noise from New U410

Bought a brand new U410 two weeks ago. Nice computer, but I notice a clicking noise which I assume is originating from the hard drive every so often. It's very low, but noticeable. Tried a few apps to quiet the drive but none worked.
Downloaded a couple of programs to test the hard drive and all is well.
Do others have this clicking noise and if so can I assume it is just the hard drive with power management feature parking the heads?
TIA!

Hi
Welcome to the community.
As your concern clicking noise occurs, I would suggest you to please visit the mentioned below web link and update the Bios.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073650
After this, please restart the system and check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Clicking noise from the HDD of the new Mac Mini

I just recently purchased a new Mac mini to retire the Macbook pro from my leaving room (it was heating up too much when running Plex). The problem I find is that the new Mini's HDD (toshiba 5400) has a loud clicking noise which on the MBP I can't barely notice. Is anybody else experiencing this?
I would like to understand if this is just a faulty HDD so I can exchange it or if the sound is normal and then I would just return it.
Thanks in advance

No clicking on my 2010 aluminum model or any of the previous ones that I have had.

Clicking noise from Ac adaptor while charging using 600W inverter

I am trying to charge my laptop from a 12 volt battery through a 600w inverter.
However the latop won't charge and the charger just makes a clicking noise.
Does any one know why this is?
And can anyone help me?

I have no idea why the AC adaptor makes such clicking noise but this does not sound good.
You should use an compatible car ac adaptor for the notebook since wrong car adapter could damage the notebook.
Would recommend contacting an Toshiba service point in your country to get a right part.
You could also check some independent online resellers to get such part.

Clicking Noise from hard drive_U410

Similar Messages

Maybe you are looking for